«... "in the cell of the table?

Similar Questions

• How to change the default alignment of text in the cells in a table on the demand for numbers?

  I'm new to Mac. I own a MacBook pro MF839HN/A and currently using the 3.6.2 release NUMBERS (2577). I want to know if I can change the default alignment of text in the cell in a table of NUMBERS application? Also, when I select all the cells in a table to change their alignment, I can only change the horizontal alignment of the text and not the vertical alignment. To change the vertical alignment of the text in a cell, I have to select them individually. Help me with two questions.

  The only way I know is to create a table that is set up as you like, then save the empty document as a template customized by using the menu item "file > save as template:

  

• How do you return a blank in table 2, when there is no data in the cell related in table 1?

  I run a recreational League of golf and have been recording the scores of the players (50 + players in total) with the intention of maintaining a form of disability from the League.

  So far, I did most of the calculations manually in number. Recently, I have experimented using the Lookup function but have encountered a problem with the time where the player does not play this week.

  In table 1, where I do all scores record cel when they do not play is left blank. However, in table 2 than corresponding cel returns a 0... strikes completely out of whack handicaps.

  Here is what I used in table 2 for the information of table 1...  SEARCH (name, 2016 Stats::Table 1 $Last: $ name, 2016 Stats::Table 1::G44)

  I also tried to add an IF statement, but I have obviously not understood correctly as he said I tried to refer to a cel in the statement itself.

  Example of the disability Page in the table 2 list a 0 is returned in cel 6... which is then averaged in the cel of last second... namely the problem. The cel with the 6 in it is a formula that counts the number of moves played and see it 6 because it counts as a trick played 0. This shows the wrong average score of 65.666

  Them	A	78																						1	78
  Me	Me	80	75	81	0	81	77																	6	65.6666666666667	-10

  As it appears in table 1. indicating the total number of rounds played in 5 and returning the precise average score of 78.8

  Me

  Me

  80

  75

  81

  81

  77

  5

  78.8

  Hi pondball,

  (Could be my 'golf name' somedays)

  

  Formula in Handicap::B2 and filled to the bottom and right at Handicap::X4

  = IF (LOOKUP ($A, data: $A, Data::B)=0,"",LOOKUP($A,Data::$A,Data::B))))

  IF compared the results of the first SEARCH and if it is zero, returns an empty string. If the comparison returns FALSE, the second SEARCH is called, find and returns the result of zero. AVERAGE does not take into account all results of text, including the string NULL, a zero-length text value.

  COUNT (used in the column count the number of turns) also ignores the text values.

  4th place of disability shows one of the reasons for not using LOOKUP.

  SEARCH alwas accepts a "close fit" with the search value. 'near match' for RESEARCH is defined as 'the largest value equal or less than the value of the research', and for the values text, "less than or equal" can be described as "identical or come forward in a list of items of text in alphabetical order.»

  For us, the other two values in the name list are 'less' us and the most important is 'Them', the values for 'Them' are returned.

  For this reason, I tend to use VLOOKUP instead of RESEARCH in many cases.

  VLOOKUP present the disadvantage of requiring her research-where location which will be the first column of the lookup table (which is not a problem here, because the location of the research is one ot the column data table).

  But also has the advantage of af being able to require an "exact match" search value.

  Here's the same tables of two, with VLOOKUP replacing LOOKUP. Note that the VLOOKUP function has a different syntax than the LOOKUP function.

  

  Formula VLOOKUP in Handicap::B2, filled with verse down and right at Handicap::X4:

  = IF (VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) = 0,"", VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) ")

  Written as above, the formula works correctly in rows 2 and 3, but will just return the error in the 4th row triangles, since it will not find a match (exact n) for 'Us' in column A of data.

  After confirming that it produces no unexpected error, wrap the formula in function SIERREUR as shown below and repeat the filling down and the right filling operations above.

  SIERREUR function interrupt all errors, including those affecting the results without your knowledge if they occur. Always delay adding IFERROR until you know what are the errors he fools.

  =IFERROR (IF (VLOOKUP ($A, data: $A:$ X, COLUMN (), FALSE) = 0,' ", VLOOKUP ($A, data: $A:$ X, COLUMN (), F ALSE))," ")

  Y2: = COUNT (C2:X 2)

  Z2: = AVERAGE(C2:X2) (base form)

  Z2: = IF (Y = 0,' ", AVERAGE (C2:X 2)) (real form)

  The encapsulation of the AVERAGE function in the IF statement deletes the calculation if the number of items to the average value is zero, AVERAGE preventing from return to a division by zero error. The number of circles in the column there is NOT used in the calculation of the average (AVERAGE did his own count), but is used as a switch 'OK to calculate' leaving the calculation of the AVERAGE to move forward.

  Kind regards

  Barry

• a cross on the table cell

  Is it possible a cross on the table cell?

  The term "strike" can have multiple interpretations.

  1. As a checkbox clickable?
  2. With diagonal lines, which intersect?
  3. With vertical lines or horizontal hash?
  4. With table cell fill of a model image pre-built?
  5. With gray scale or the fill color, without content, to suggest the use of cell?

  Pages, you didn't say what version, so I'll use v5.6.2, does not provide the points 1, 2 and 3 for the cells in a table.

• Add notes to the content of the table cell

  Can someone tell me if it is possible to add cross-references to the text in a cell in a table? After searching in the forums, this question was raised by another user in 2006, and I was wondering if Apple had added this feature yet.

  Thanks for your help with this.

  Notes cannot be applied to the text in the body of the main text, and not in objects such as Tables, text boxes or shapes.

  Since 2013, Apple has removed a long list of features.

  Peter

• How do I click on a cell in a table control and display the value in a string?

  What I want to do is click on a cell in a table control and have the value of the cell in an indicator of the chain. Cell that ever I click on, I wish that the value to be displayed in the indicator.

  Thank you!

  Use the property "Change Position".

• Exaprom PDF: how cells that can cover several lines in the body of the table?

  I use Exaprom PDF but I have a case that I can't work.

  I would like to generate a table where a cell spans an entire line in the body of the table, the table should be translated as:

  ____________

  |__|__|__|__|

  |__|__|__|__|

  |___________|

  |__|__|__|__|

  Dear Marc,

  could you post an example how span a cell of an entire row in the table with the function body "Append custom Table.vi."

  For example, please use the 2009 version.

  Thank you

  Asper

  This message refers to the report Exaprom PDF generation tool:

  https://decibel.NI.com/content/docs/doc-10952

  Perhaps this.

• hyperlink in the table cell?

  Hi all

  We need to navigate a path for each row in the table control. Is it possible to have a hyperlink in a table for each row cell? or do I have to use button battery to do the same thing?

  Kind regards

  Kanu

  The answer is, you can't. However, the custom hyperlink control is open-source. You can find the source in toolslib\custctrl\hyperlinkctrl.c. It's a pretty simple code module, so it is not all that difficult to modify this code so that it could work in a table cell, rather than a message text control.

  Luis

• Updating of the table after insert shows empty cells

  Hello experts,

  I'm trying to insert some custom values of certain fields in a table displayed on my page. The table comes a VO based entity with a sequence number and a few constraints.

  The sequence numbers batteries managed automatically by the database.

  The entry fields are related to a bean managed to get the value with 'GetValue' and then I create a string for the entry. The string then gets cut in the VO as some attributes with the following SQL calculation example:

  REGEXP_SUBSTR (attribut3, "[^,] +' 1, 5")

  But it is on the ViewObject/database layer.

  After I call the method of the VO Impl to create the new line like this:

  Managed bean:

  OperationBinding operationBinding = bindings.getOperationBinding ("addRow");

  operationBinding.getParamsMap () .put ("Value1", someInt);

  operationBinding.getParamsMap () .put ("Value2", someIntToo);

  operationBinding.getParamsMap () .put ("Value3", someString);

  operationBinding.execute ();

  
  

  Impl VO:

  
  

  ' public void addRow (integer value1, value2 Integer, String value3) {}
  

  
  

  ViewObject vo = this;

  NewRow row = vo.createRow ();

  
  

  newRow.setAttribute ("attribut1", value1);

  newRow.setAttribute ("attribut2", value2);

  newRow.setAttribute ("attribut3", value3);

  
  

  vo.insertRow (newRow);

  this.getDBTransaction () .commit ();

  }

  I capture without exception again, but when I place everything correctly and trigger the code bean managed via a button action, the table shows the new line with the correct integers, but the channel cut in two by the calculation of SQL from the top shows only blank cells. After that research with the filter of the table and remove the search filter once again, the strings appear correctly.

  For example, after you insert:

  

  Then, after 'refreshment' with the filter:

  

  What can I do about it? I can't really put the data through the InsertWithParams, because I need build the string with the Java Code.

  It only does not show data after insertion, PartialTrigger (s) also will not work.

  You must re-run the sql query after validation (with: vo.executeQuery ())

  Dario

• Images in the cells in a table - maintenance of stroke

  I am a complete newbie and find it difficult to put images in the tables. I place the pictures in my cells, and when I go in presentation mode, the features of the cell are still visible. When I go to print a pdf file, the borders of the image are hiding the cell borders. What Miss me? Thank you

  For a graphic cell, there is an option to clip the chart for the cell.

  Select the graphic cell, and then choose table > cell Options > graphics > Clipping > Clip inside the cell

• How do I get the table cells?

  It's my get code that any object in propagation.

  Int32 childCount = parent-> GetChildCount();

  for (int32 /IndexEnfant = 0; childIndex < childCount; /IndexEnfant ++)

  {

  InterfacePtr < IHierarchy > child (parent-> QueryChild (childIndex));

  ChildUIDRef = UIDRef: GetUIDRef (child);

  TextFrame table

  }

  How do I get the table cells?

  You can access the table using ITableModel and GridAddresscell.

  But to get to the ITableModel since ITextModel implies some complexity.

  Few things to understand:

  -L'interface that corresponds to the written document is ITextModel

  -The recommended method to iterate tables in a story done by ITextStoryThreadDictHier

  -Get the ITextStoryThreadDictHier on the history and the main thread as ITextStoryThreadDictHier::NextUID()

  -Now get ITextStoryThreadDict for UID and query for ITableModel. If you get ITableModel, then you have found the table.

  Once you have ITableModel you can get ITableCell as follows:

  ITableModel:QueryCellContentBoss(GridAddress); Give ITableCell

  You can refer to SnipperRunner (SnpManipulateTextModel).

  Download text template table model:

  InterfacePtr textModel (storyUIDRef, UseDefaultIID());

  InterfacePtr textStoryDictHier (textModel, UseDefaultIID());

  NextUID UID = sourceStory.GetUID (); / / Download the main thread dictionary

  Now loop the dicthier to iterate through all the threads dicts.

  InterfacePtr textStoryThreadDict (sourceStory.GetDataBase (), nextUID, UseDefaultIID());

  InterfacePtr tableModel (textStoryThreadDict, UseDefaultIID());

  If (tableModel) / / the storythreaddict represents a table

  {

  You are now in a table

  }

• Unable to get the elements placed at the top and bottom of the cell of the table with vertical-align

  Hello

  I have a three-day educational courses in the list table. In each cell, I have the title of the presentation at the top with the name of the speaker below. Because some titles are longer than others, the line grows (rightly) as longer securities are covered in Word. So far so good. Now, I want all the titles to always start at the same distance from the surface of the cell (I use padding 2px) and names of speaker all be equidistant from the lower border, (i.e. 2px).

  I tried to place the title elements with < span style = "vertical-align: top" > </span > presentation title

  and the name of the speaker as < span style = "vertical-align: bottom" > name </span > Speaker

  and I tried the same method with < div > and < p > tags. Items don't move. Can someone tell me how to make the names of the speakers will be all aligned at the bottom of each cell?

  Here is an example of the code table I've tried:

  (Thanks!)

  < table style = "text-align: center;" do-family: Arial; background-color: #f7d49c; "border ="2"bordercolor =" #467E9F "cellpadding ="2 ".

  "cellspacing ="0"width ="900">"

  < tbody >

  < b >

  < td width = "300" > < span style = "" vertical-align: top; "> This is a short title </span > < br / >"

  < span style = "vertical-align: bottom" > name </span > < table > Speaker

  < td width = "300" > < div > is the title of another presentation, which is really long because some of the presentations have titles like that < / div > < br / >

  < div style = "vertical-align: bottom" > Speaker name < / div > < table >

  < td width = "300" > < span style = "vertical-align: top" > This is yet another presentation with a semi-long title </span > < br / >

  < span style = "vertical-align: bottom" > < table > </span > Speaker's name

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < b >

  < td > < table >

  < td > < table >

  < td > < table >

  < /tr >

  < / tbody >

  < /table >

  By default, the content of the table cell is average aligned.  You need not do anything.

  If you want your cell vertically aligned up or down, you can specify it in your CSS.  These effects all the text inside the cell.   It's all or nothing.

  Some text that is aligned at the top

  Some bottom-aligned text

• Value of the cell in a table cannot access

  Hello

  I'm not much more expert in oracle apex. Please help me with this problem.

  I use APEX 4.2.

  I have a master form (FORM1) where I have some text fields and a tabular presentation where the data in the child table to appear (product ID, product name). Each line has a check box.

  I added a new button in the region in a table. I want to make is that:

  Select a line in the form of tables (per box), and then click the button

  System must open a form (FORM2) with the ID and name pre-populated from the line selected tabular form (FORM1). In other words, I'm wearing on data from cells in the form of FORM1 to FORM2.

  I tried "with the value" which is one of the option Button in the apex, but in this case, it does not work. because the cells in a table of master / detail are not recognized as part of the page (meaning fields text beginning as P1_Details, P1_Total. etc, but the name of tabular form fields begins without page number as Product_ID, Product_Name)

  Sorry for the long haul. I tried to explain as much as I could. Please help me.

  Thank you

  Mohammad

  The easiest way is to change the boxes to use the links. You can format the column link to direct to a page with the values from the current row. It's about how master detail, you already have should work.

  If you must have check boxes, you will need the user to select more than one face. I would like to option buttons if you need to have the user select the line and then click on the button.

  To get the selected value, you'll need javascript or dynamic action and is very well the link Scott.

  Greg

• Apply the Style to the table using Extendscript CC cell text

  Hello

  I have the following code. I try to scan a document and a specific keyword research based on the regex. That part works. I then get the range of text for those keywords and the highlighted text. This method works. What does not work, it is when I try to do the same in the text that is in a table cell.

  #target framemaker
  
  var doc = app.ActiveDoc;
  var totalPgfs = 0;
  
  var pgf = doc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
  
  function do_table_work(pgf){
      var result = pgf.GetText(Constants.FTI_TblAnchor);
      var all_text = '';
      for (var i = 0; i < result.length; i += 1) {
          var t_object = result[i].obj;
          var t_cell = t_object.FirstRowInTbl.FirstCellInRow;
          while(t_cell.ObjectValid()){
              var cell_items = t_cell.GetText(Constants.FTI_String);
              var tr = new TextRange();
               tr.beg.obj = tr.end.obj = pgf;
  
  
               tr.beg.offset = 0; //this is built dynamically
               tr.end.offset = 7; //this is built dynamically
  
              apply_char_format(text_range)
              t_cell = t_cell.NextCellInTbl;
          }
      }
  }
  
  function apply_char_format(text_range, name) {
      var color = doc.GetNamedColor(name);
      if (color.ObjectValid()) {
          var set_val = new TypedVal();
          set_val.valType = Constants.FT_Integer;
          set_val.ival = true;
          doc.SetTextVal(text_range, Constants.FP_UseBkColor, set_val);
  
  
          set_val.valType = Constants.FT_Id;
          set_val.obj = color;
          doc.SetTextVal(text_range, Constants.FP_BkColor, set_val);
      } else {
          alert('Color does not exist');
      }
  }
  
  while (pgf.ObjectValid()) {
      do_table_work(pgf);
      pgf = pgf.NextPgfInFlow;
  }
  

  The problem is that it is not highlighting the text in the table cell as I want it. If I process the document and use the following syntax:

  var result = pgf.GetText(Constants.FTI_String);
  

  It will highlight the text (with extra code to loop through these results).

  Any thoughts on what I'm missing?

  Hi Green,

  I don't have time to debug this script completely, but I see things that seem unusual.

  1. var result is TFP. GetText (Constants.FTI_TblAnchor);
  2. var all_text = ";
  3. for (var i = 0; i)< result.length;="" i="" +="1)">
  4. var t_object = .obj result [i];
  5. var t_cell is t_object. FirstRowInTbl.FirstCellInRow;
  6. While (t_cell. {ObjectValid()})
  7. var cell_items is t_cell. GetText (Constants.FTI_String);
  8. var b = new TextRange();
  9. TR. Beg.obj = tr.end.obj = bmp;

  GetText() is valid for a table cell, I don't know if that's what you want. I think I want to explore the individual paragraphs. I'm not quite clear on what this code does do exactly, but it seems that this would make it much easier to implement the text ranges. GetText() will cover all the paragraphs in a cell, if there are several.

  Added to this, your line "tr.beg.obj = tr.end.obj = bmp;" makes no sense to me, because you're coming back the paragraph which contained the anchor point of the table. In other words, you just leave the table entirely.

  So it's just a few riddles, but it seems more likely that you would something along these lines:

  1. var t_cell is t_object. FirstRowInTbl.FirstCellInRow;
  2. While (t_cell. {ObjectValid()})
  3. var cellPgf is t_cell. FirstPgf;
  4. var cell_items = cellPgf.GetText (Constants.FTI_String);
  5. var b = new TextRange();
  6. TR. Beg.obj = tr.end.obj = cellPgf;

  Hope this helps some.

  Russ

• With the last update, I am unable to merge cells in a table and Ive tried Split and Live view.

  With the last update, I am unable to merge cells in a table and Ive tried Split and viewing live, all the tutorial and manuals say to do in Design view, which is no longer available.  How to merge cells in a table now?

  To get the fashion Design back in a checkerboard to fluid...

  Close all other files, open the fluid grid css and add the X below:

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X 4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Then save and close the file.

  DW restart and you should have mode Design from here out on all files using this fluid grid .css file.