In the face of the issue in the 'Show ip route' command in GNS3
Dear technical support engineers,
I am new in the field of cisco, I do a simple and here's the configuratons topology:
R1 #show int ip brief
Interface IP-Address OK? Method State Protocol
12.1.1.1 serial1/0 YES manual up up
13.1.1.1 serial1/1 YES manual up up
Loopback0 1.1.1.1 YES manual up up
R1 #show ip route
Gateway of last resort is not set
1.0.0.0/8 C is directly connected, Loopback0
12.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks
C 12.0.0.0/8 is directly connected, Serial1/0
C 12.1.1.2/32 is directly connected, Serial1/0
13.0.0.0/8 is variably divided into subnets, 2 subnets, 2 masks
C 13.0.0.0/8 is directly connected, Serial1/1
C 13.1.1.3/32 is directly connected, Serial1/1
This output is confusing for me, it is veriably divided into subnets. I have a lot of search on google for the solution, but failed, now looking forward to you.
I want this result as:
R1 #show ip route
Gateway of last resort is not set
1.0.0.0/8 C is directly connected, Loopback0
C 12.0.0.0/8 is directly connected, Serial1/0
C 13.0.0.0/8 is directly connected, Serial1/1
Your prompt response will be highly appreciated.
Thank you & best regards
Tayyab Arif
When you use ppp encapsulation, the default is to use a route peer that is where you see your 32. On your serial interface, do not enter "no peer neighbor-route", judgment No. closed your interface and the 32 should be gone.
HTH,
John
Please note all useful messages *.
Tags: Cisco Network
Similar Questions
-
'Not implemented protocol 0' on the show SmartCardSession.sendAPDU command
I'm developing a new application for smart card.
I created my driver and session classes and load them.
Here is the code in the class sessions that tries to send a command UDPA la carte:
CommandAPDU command = new CommandAPDU( (byte)0x00, (byte)0x182, (byte)0x00, (byte)0x25, (byte)0x07 ); ResponseAPDU response = new ResponseAPDU(); try { sendAPDU( command, response );
I have a SmartCardException with a message of "Protocol not implemented 0" when I try to run the sendAPDU command.
Help, please.
To the page:
Phone: BlackBerry 8330.
Software: 4.5.0.77
The smart card reader is the reader of smart card BlackBerry, model: RBB10BW.
Both the player and the BlackBerry are the latest smart card reader drivers available on the website (4.2.0.107).
I talked to Mike Kirkup on the EDGE, and it turns out that this is a bug in the way that the drivers are the analysis of the ATR. The smart card supports T0, but because of the wrong analysis of the RTA, the driver is unable to detect T0 support. Mike has developers who are working on a fix. Apparently, it will take the drivers of news reader. If you know Mike, please urge along.
Thank you.
-
I recently downloaded Adobe CC 2015... Face serious problems with the PS when I try to superimpose images.
Here are the steps I followed:
1. file-> Scripts-> battery files
2. five selected. CR2 files (average size 28 MB)
3. click on Ok
4. once photoshop has completed her treatment, selected layers and Edit-> auto-merge the layers-> stack of Images
Please note that I followed the same steps in converting the CR2s in JPEG... same error result
Error result
PS throw up a dialog error: could not complete the automatic Layer Merge command because there is not enough memory
Expected result
Photoshop must accomplish the task of auto-merge layers
Details of the information system
Here is the report system in case it is useful
Information system writes to report: 29/11/15 13:23
Name of the operating system Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
System model Inspiron 5520
System Type X 86-based PC
Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors
A14 BIOS Version/Date Dell Inc., 13/05/2013
SMBIOS Version 2.7
Hardware Abstraction Layer Version = "6.1.7601.17514".
The time zone India standard time
Physical memory (RAM) installed 8.00 GB
2.39 GB total physical memory
1.26 GB available physical memory
4.77 GB total virtual memory
2.92 GB available virtual memory
2.39 GB page file space
Name GPU Intel(r) HD 4000 Adapter type Compatible with Intel(r) HD Graphics Family, Advanced Micro Devices, Inc. Description of the adapter GPU Intel(r) HD 4000 RAM card 1.01 GB (1,080,743,936 bytes) Driver version 8.951.9.1000 Name AMD Radeon HD M 7670 Adapter type Card compatible (0 x 6840) ATI graphics, Advanced Micro Devices, Inc. Description of the adapter AMD Radeon HD M 7670 RAM card 1.00 GB (1 073 741 824 bytes) Drivers installed aticfx32.dll, aticfx32.dll, aticfx32.dll, atiumdag.dll, atidxx32.dll, atiumdva.cap Driver version 8.951.9.1000 I guess the real problem here is the drive working, not RAM. They both found messages 'insufficient memory '.
Historically, Photoshop has always been remarkably well with large files and little RAM. Excess data which cannot be held in RAM are written to the drive to work, and even if it slows down things considerably, it really requires a lot to run Photoshop to a complete stop.
Of course, you must move to a 64-bit version of Windows. As it is, Photoshop can use less than 2 of your installed 8 GB of RAM. It's not much, but do not attempt to allocate more than 70% in the PS preferences. Process of the operating system and other applications need RAM too. Allowance too will choke the rest of your system and send it to pimples without end-of-file exchange.
-
Can I use my iPhone 7 in the shower?
I recently got the new iPhone 7, and I was wondering if I could take him in the shower. For example, could I bring it watch something on YouTube (nothing more than twenty minutes)? Don't want to break it, thank you!
The phone is water resistant, but you seriously want to risk a $800 (more or less) device for watching YouTube videos in the shower? You get a waterproof enclosure, let the phone out of the shower. You can listen to music in this way.
-
Hello
After the last update that I can develop is more saved passwords window shrinking the web address to make it unreadable when the "Show passwords" option is selected? What passwords are shown the window compresses web addresses that leaves the www / / http and I can only be able to view a letter or a description of the site. Given the number of passwords you need and different requirements (i.e. 6.8, or 10 characters, high low case number of cases etc.), I quite often find that I want to display the entire page.
Is there a way I can expand this window please? I know I could use a master password, but I always like to follow the real things...
THX JasLower right corner is a "triangle of 6 points" which allows this window to drag more big. Once more this setting is after the closure of the tab "content" and even after that Firefox is closed and reopened.
-
no cookies in the show of the cookies after firefox update
All the cookies disappeared show cookies, tools, options, privacy. The show remains empty cookies after visiting many sites.
As you have noticed, Firefox 38 presents dialog boxes Options/preferences based on the tabs, and this could be a little problem with the settlement data tab for a reason (it is based on a bug in new code or an add-on or other factors).
If you are prone to a little more troubleshooting, could you try Mode without failure of Firefox to see if cookies are visible here? Details below.
If you prefer to go back to the old dialog instead, there is a way to do it.
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste pref and make a pause so that the list is filtered
(3) double-click the preference browser.preferences.inContent to true to false
Note: I don't know if that will ever be in Firefox or is a transitional device. As you have probably noticed, the long-term trend is to remove things that appear.
Test Firefox Safe Mode
It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
Does not work if Firefox: Hold down the SHIFT key when you start Firefox.
If Firefox is running: You can restart Firefox in Mode safe mode using either:
- button "3-bar" menu > "?" button > restart with disabled modules
- Help menu > restart with disabled modules
and OK reboot.
Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).
Any difference?
To return to regular navigation, the release of Firefox and launch it again without maintaining the SHIFT key.
-
I found the show/hide button toolbars, but you should know how to REMOVE toolbars that appear on this list?
Is attached a screenshot of my screen with the context menu to show/hide tabs. I want to delete some of them and let others. Please help me to know how. Thank you!
Hmm, maybe this "one-time" imported into the new preference? Try this:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste the cust and make a pause so that the list is filtered
(3) double-click the preference of browser.uiCustomization.state and the content must be highlighted in a small dialog box.
(4) copy the whole line and paste it into Notepad and save it as a backup.
(5) in Firefox, click on the button '3-bar' menu > developer > Notepad. Remove the comment that appears and paste data preferably, that must appear on a long line. Click on the "Pretty Print" button to make it more readable.
So I hope that you can spot the extra toolbars and change them out, taking care to preserve the commas between the elements.
I don't have the extra toolbars in mine, but I copied and pasted back this spaced format and Firefox was able to handle it well. I went into customize and moved a button, and when I left, Firefox has rewritten the preference set as a single line. Assuming that yours works fine, then you can get rid of the backup from step (4).
-
Bookmarks do NOT open in a browser window click on the "show all bookmarks".
Currently using Firefox 30.0.3 Mac OS 10.9.5. When I tried to modify my collection of bookmarks buy opening the "show all bookmarks" in the drop down menu, nothing happened. Usually, this opens a new tab or window with bookmarks is displayed. Then I searched HELP and tried all the solutions without success. Where the topic of aide said even a Bookmarks window will open, this isn't. I have no way to edit or delete massively outdated bookmarks. Yes, I can do so individually through the bookmark button in the toolbar - what a pain in the ___s.
Is - this problem is intentional or a glitch?
Good to hear. Several users have reported problems with
multiple monitors.Please report your last post as solved if others
will know. -
Unable to find the "Show all bookmarks" button on Firefox 29
I can no longer locate the "Show all bookmarks" button in the menu bookmarks Firefox 29. I tried to search in the bookmarks bar, but it's not there either. I would like to manually save my favorites from time to time - is there another way to do this on Firefox 29?
Do scroll all the way to the bottom of the bookmark in the menu drop-down, or press (Ctrl + Shift + B) and the signet library will pop up.
I don't understand why Firefox due do so difficult to open the bookmark library in FF29.
-
the "Show all downloads" button shows only a download after it's over
In Firefox, the 'Show all downloads' button shows only a download after it's over. It is similarly of the dialogue download library. Downloads occur, but you do not see the status until it is complete. It started yesterday, using Firefox 27. I upgraded to 28.0 but it still happens. I have also reset Firefox, nothing happens. I am running Windows 7.
The answer was... Conduit search malaware himself had installed on my PC. Uninstalling it solved the problem.
-
I'm in a band and make a lot of drums and hike as well. A lot of things on the outside where I might have to move my arm quickly or a lot. Always do
the Milanese loop what the band for me? (I'm a guy is told by the way) and secondly I can wear Apple Watch in the shower? answers will help me to decide what the band to get when I buy a Apple Watch 42mm soon
See this document: water on Apple Watch - Apple Support resistance
https://support.Apple.com/en-us/HT205000
No shower while wearing the Watch:
Your Apple Watch is splash and water resistant, but not waterproof.
....
and
The following can affect your Apple Watch water resistance and should be avoided:
- Do drop your Apple Watch or submit to other impacts.
- Submerge your Apple Watch in water for long periods of time.
- Swim or bathe with your Apple Watch.
- Expose your Apple Watch pressurized water or water of high velocity, for example, take a shower, water skiing, wake boarding, surfing, jet skiing and so on.
- Wear your Apple Watch in a sauna or Hammam room.
I'm not sure of the loop of the Milanese to your needs. It is easily adjustable and fits perfectly, but it's magnetic and I'm not sure if that may interfere with your equipment.
My watch has the sports Strip and that is comfortable also.
-
Buy the show with another country
Hello!
First of all, thank you for taking the time to read about me.
So, I live in the US and my parents live in Mexico; recently (this week) I've gifted them a TV series via iTunes.
My mother has an iTunes account in the Mexico and she received the e-mail confirmation on the talented TV show really. However, for some reason, she isn't able to download the show I bought for them (human universe with Professor Brian Cox). My mother doesn't speak English, so she doesn't know what the e-mail she received. I may have it send me a screenshot of what said e-mail, so that I can translate then.
My questions:
1. is it possible to download/buy a TV series to the Mexico I've them good of the United States?
2. can she download/share this TV using Apple TV series?
Thank you!
Rodrigo
1 n °
2 No.
-
Equium A60-173 PSA67E: WLan card supports the Orange Livebox router
This is my first post so please accept if he is not writing to apologize.
I have the laptop above and would like to know if it would be compatible with a wireless network card to connect to my Livebox Orange router?
Thanks in advance.
Neil
First of all, are you sure that your laptop is equipped and supplied with the internal WLan card 100%?
I m not sure but I think that this phone does not support the Wlan? :|In any case, if the minPCI wireless network adapter is not available, you can use an external WLan solution as a key USB WiFi. These sticks are cheap and easy to install.
I talk to you I recommend checking out the Livebox Orange router specifications. You know what Wlan standard is supported. You know the Wlan standards?
I mean the standard 802.11 A, B, G or N most recent standardB and G standards are best known and no longer supported.
Well well, to cut this story; You must use the card/WLan USB WLAN which supports the WLan standard even as your WLan router ;)
Good bye
-
My I phone screen see the black with a command like a dos {nand} system...
Your phone has a serious problem. You can try to reboot (hold home and power at the same time for about 10-30 seconds buttons), but if that does not work, your hardware is probably fried. Make an appointment at your nearest Apple Store Genius Bar for confirmation.
-
The message says "to use the line tool java command, you must install a JDK. Click on "more information visit the java developer kit download site." I followed all these steps and downloaded the correct software update, but still getting the message.
A
If you have installed the plugin of Facebook video appeal and you no longer want to use it, you can remove it as follows.
1 back up all data.
2. open the library folder in your home folder by holding down the option key and selecting
Go ▹ library
in the Finder menu bar.
3. place these items in the library folder to the Trash:
LaunchAgents/com.facebook.videochat.name.plist
Support/Facebook app
Here the name represents the name of your Facebook.
4 log off or restart the computer, and then empty the trash.
B
If you do not use this plugin, or any other software (for example, some Adobe products), which depends on Java, install the Java runtime distributed by Apple.
C
If you do not have the Facebook plugin and you don't want to install Java, please ask for further instructions.
Maybe you are looking for
-
Apple TV 4th gen falls randomly internet connection
I have an apple's generation 4 tv and it randomly falls out of internet connection. I have to restart my router on average once a week to fix. It's really frustrating. My MacBook and iPhone has no problem. When internet decreases, macbook and iPhone
-
Satellite A100-062 - connect via HDMI LCD monitor
Hello I wish I could connect my laptop Satellite A100-062 to LCD TV.The TV has a HDMI input. I understand that I could get a cable to connect DVI to HDMI, but I'm not sure I'd be able to output/DVI laptop computer. Is it possible to connect the lapto
-
I can't install mSATA SSD?
Hi, I wanted to know if I have the option to install an mSATA SSD drive in one of the following: (not preinstalled, but on my own) HP Envy 15z-Q300 (L6E56AAR) HP Envy 15z-Q100 (L6E55AAR) I see the models above on EBay and more here on the site of HP:
-
I have controls Pro does not receive the volume update on the evolution of the patch
Hello An I-controls Pro connected USB sending volume updated MainStage; but does not not not the volume update on the evolution of the patch What is the tric? I have a screen midday traffic, MainStage send nothing Thanks in advance Best Cyril P.S. I
-
Trying to get former video game PC on Windows 7 64 bit compatibility
I'm a gamer and I have a large library of games old and not so old (e.g. Civ IV, CivCity Rome, Rome: Total War, Neverwinter Nights, etc..) I have been to the Windows 7 Compatibility Checker and noticed a bit of a mixed bag for what is compatible or n