URGENT: Photoshop CC 2015 ERROR *: unable to complete the auto-merge layers command because there is not enough memory
I recently downloaded Adobe CC 2015... Face serious problems with the PS when I try to superimpose images.
Here are the steps I followed:
1. file-> Scripts-> battery files
2. five selected. CR2 files (average size 28 MB)
3. click on Ok
4. once photoshop has completed her treatment, selected layers and Edit-> auto-merge the layers-> stack of Images
Please note that I followed the same steps in converting the CR2s in JPEG... same error result
Error result
PS throw up a dialog error: could not complete the automatic Layer Merge command because there is not enough memory
Expected result
Photoshop must accomplish the task of auto-merge layers
Details of the information system
Here is the report system in case it is useful
Information system writes to report: 29/11/15 13:23
Name of the operating system Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
System model Inspiron 5520
System Type X 86-based PC
Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors
A14 BIOS Version/Date Dell Inc., 13/05/2013
SMBIOS Version 2.7
Hardware Abstraction Layer Version = "6.1.7601.17514".
The time zone India standard time
Physical memory (RAM) installed 8.00 GB
2.39 GB total physical memory
1.26 GB available physical memory
4.77 GB total virtual memory
2.92 GB available virtual memory
2.39 GB page file space
Name | GPU Intel(r) HD 4000 |
Adapter type | Compatible with Intel(r) HD Graphics Family, Advanced Micro Devices, Inc. |
Description of the adapter | GPU Intel(r) HD 4000 |
RAM card | 1.01 GB (1,080,743,936 bytes) |
Driver version | 8.951.9.1000 |
Name | AMD Radeon HD M 7670 |
Adapter type | Card compatible (0 x 6840) ATI graphics, Advanced Micro Devices, Inc. |
Description of the adapter | AMD Radeon HD M 7670 |
RAM card | 1.00 GB (1 073 741 824 bytes) |
Drivers installed | aticfx32.dll, aticfx32.dll, aticfx32.dll, atiumdag.dll, atidxx32.dll, atiumdva.cap |
Driver version | 8.951.9.1000 |
I guess the real problem here is the drive working, not RAM. They both found messages 'insufficient memory '.
Historically, Photoshop has always been remarkably well with large files and little RAM. Excess data which cannot be held in RAM are written to the drive to work, and even if it slows down things considerably, it really requires a lot to run Photoshop to a complete stop.
Of course, you must move to a 64-bit version of Windows. As it is, Photoshop can use less than 2 of your installed 8 GB of RAM. It's not much, but do not attempt to allocate more than 70% in the PS preferences. Process of the operating system and other applications need RAM too. Allowance too will choke the rest of your system and send it to pimples without end-of-file exchange.
Tags: Photoshop
Similar Questions
-
I am editing some photos for my work and they are all in RAW, but when I try to open some, they give that 'it is not possible to complete the command because there is not enough memory (RAW)"what should I do?
Please open Photoshop and go help > System Info > copyand fill with dough this thread with Ctrl v
-
I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?
How much memory you allocate to Photoshop in the preferences?
Terri
-
I have a couple of server 08 R2 machines where the P to V conversion fails. I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space. Conversion fails with the error below.
VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
2147754783 (0x8004231F).Someone had this problem and came to the top with a solution or to get around?
Thanks in advance
Guessed it. My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it. My servers now converted without any problem.
- Open disk management.
- Look at the partition of the PRS and see if it is 100% full.
- If Yes, proceed to step 3.
- If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
- Click a drive, select properties and then select the instant snapshots tab.
- Ensure that all shadow copies are disabled and no limit on all players.
- Go to the partition of the SRP and assign the B:drive letter.
- Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
- Right-click the System Volume Information folder, and then select Properties.
- On the Security tab, click Edit, and then add the group with full control everyone in the folder.
- Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
- B:
- B:\>FLTMC UNLOAD AAFSFLT
- Navigate to the System Volume Information folder, and then type the following commands:
- B:\>CD System Volume Information
- B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
- B:\System Volume Information > CD\
- B:\>FLTMC LOAD AAFSFLT
- Close the command prompt window.
- In Windows, right click on the reserve system folder and remove the Group everyone.
- In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).
-
For some reason any this message when I try to import video frames to layers. Why? I have seen that many has the same problem. How do you solve this?
I use Photoshop CS6 extended. Help, please.
I found a youtube video, giving an alternative to this prblem. I tried and it works atually!
SOLUTION OF SPARE question Photoshop CS6 dynamic link - YouTube
-
Photoshop CS5 Extended on iMac thinks that there is not enough memory
When I try to open a tiff file of 42 MB in Photoshop CS5 extended on my 2.16 GHz iMac Intel Core 2 Duo with 3 GB (OS X 10.6.4 64-bit), Photoshop displays a window with the message "could not complete the command open because there is not enough memory (RAM live).»
The same file can be opened easily in Photoshop CS2 on my PC of 1 GB.
Performance of Photoshop preferences are set on let PS 2013 MB (70%).
I've read several PS performance guides user to one, but not available.
Can anyone here help me? Thanks in advance!
Kind regards
Matthew
You are on a macintosh computer, there is a command line tool called tiffutil that can dissect a tiff file.
tiffutil - verboseinfo file.tiff
-
Original title: new resource error in painting, whenever I try to close the file or select all content
(Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:
"There is not enough memory or resources to complete the operation. Close some programs, and then try again. »
Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?
Hi ebjeebee,This problem can occur for the following reasons:- If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
- If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
To resolve this issue, use the appropriate method:- If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
- If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:
a. open an existing bitmap.
b. in the Image menu, click attributes.
c. click on default and then click OK.
d. on the file menu, click Save as and save the bitmap with a new name.
e. close and restart Paint.
-
Cannot complete the preview. There is not enough memory. ID = - 108
We run CS5.
One of our customers sent us a file they would like printed. The file is 1 MB in size and format PDF - nothing unusual about any of this. As usual, I saved the file and tried to open it in Illustrator to put up a test for our client, and check and make sure the file is print-ready. I received the error message: "cannot complete preview. There is not enough memory. ID = - 108". I press OK and it opens an empty file with some benchmarks of this crop.
I tried to find a solution online, but all who have this problem seems to have virtually no RAM. I am currently running on a computer brand new with Windows 7, 16 GB of RAM and Intel Core i7 processor. I didn't think my RAM or cache have been the problem, but just to be safe, I turned off the computer, let it rest for a few minutes and it starts again. The same problem.
I am able to open the file in Photoshop and Acrobat - but even when I save the file in a lower resolution and turn it into a jpeg file, it will not always be open. I get the same error.
I need to be able to work with this file. How can I solve this?
Thank you!
Josh,
What happens if you create a new document and then try file > place the awkward file in it?
-
Cannot format DVD error "unable to complete the format."
Original title: Impossible to format error DVDs
Can anyone help. I have Windows Vista Home Premium 32-bit with service pack 2. I'm unable to format a DVD RW it comes back with an error message saying unable to complete the format. I have tried different brands of DVD, I saw it was a mistake before service pack 2 and there was a fix. I have SP2 and it will not apply the hotfix that is a quite old. Any ideas?
Hello
It seems that you are unable to format DVD, you get an error that it is unable to complete the format.
You format the drive by using the "active file system?
Here are a few troubleshooting steps that you can try to solve this problem.
Method 1: Run the following fix - it.
Your CD or DVD drive cannot read or write media.
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2: Remove and reinstall the drivers for the CD or DVD drive
To do this, follow these steps:
a. Click Start and then click Control Panel. Click system and security, click System, and then click Device Manager.
Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
(c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK. Restart the computer.
e. After you restart the computer, the drivers will be installed automatically.
Method 3: Refer to this link.
Format a CD or DVDhttp://Windows.Microsoft.com/en-us/Windows-Vista/format-a-CD-or-DVD
If you have additional problems, please reply to this post and we will be happy to help you further.
-
Postgres error - unable to complete the operation
Server 5, running like a dog Profile Manager. Ive used the "Proxy timeout" fix Apache posted on these forums who helped for awhile, but now (without changing anything) Profile Manager is back to crashing often.
If I type sudo serveradmin beginning postgres or serveradmin stop postgres, I get the error message below.
Postgres:error =<62706c69 73743030="" d4010203="" 04050618="" 19582476="" 65727369="" 6f6e5824="" 6f626a65="" 63747359="" 24617263="" 68697665="" 72542474="" 6f701200="" 0186a0a4="" 07081112="" 55246e75="" 6c6cd409="" 0a0b0c0d="" 0e0f1056="" 4e53436f="" 64655a4e="" 53557365="" 72496e66="" 6f584e53="" 446f6d61="" 696e5624="" 636c6173="" 73100180="" 00800280="" 035f1014="" 636f6d2e="" 6170706c="" 652e7365="" 72766572="" 6d677264="" d2131415="" 165a2463="" 6c617373="" 6e616d65="" 5824636c="" 61737365="" 73574e53="" 4572726f="" 72a21517="" 584e534f="" 626a6563="" 745f100f="" 4e534b65="" 79656441="" 72636869="" 766572d1="" 1a1b5472="" 6f6f7480="" 0108111a="" 232d3237="" 3c424b52="" 5d666d6f="" 7173758c="" 919ca5ad="" b0b9cbce="" d3000000="" 00000001="" 01000000="" 00000000="" 1c000000="" 00000000="" 00000000="" 00000000="" d5="">
Postgres:errorDescription = "the operation could not be completed. (error 1 com.apple.servermgrd.) »
Postgres:ErrorCode = 1
What does that mean and when apple will fix the.app?
Bosco1983, it is without doubt something recorded in /Library/Logs/ProfileManager/servermgr_devicemgr.log when this happens. You can paste it into this discussion?
62706c69> -
I tried many ways to create a custom PS CC brush (2015), and all my efforts give the same error identified in the subject. I copied the shape layer in PS CC (2014) and everything worked fine. As a solution, I saved the brush set out and transferred to 15. I can't understand what is wrong. Is there a bug in 15 w 'set preset shape' specifically? Greatly appreciate suggestions and knowledge. Thank you!
See you soon,.
-DK
Which will not. There's nothing a brush without bristles of brush 100% white. There is nothing to set.
-
I was wondering if someone could tell me what I'm doing wrong
I would use it on a duplicate layer ctrl/cmd-J for the layer that you want to fill or visible merged stamp ctrl-alt-shift-E. The feature is intended to fill small transparent surfaces such as a mesh of pano or remove an object from an image. It has not been designed to fill an empty layer.
-
"Could not complete because there is not enough opaque pixels source"-Please help
You must have a few pixels in the layer that you are trying to use the fill content on up-to-date. Your screenshot, it looks like the layer you have selected is completely transparent.
-
"Could not complete because there is not enough opaque pixels source"-not solved by another thread
I get the error shown in the title of this thread, and I have no idea why. I work with an image that is NOT transparent kind. Everything is 100% opacity. In fact, it's okay that I work with, whenever I try to fill whole selection on any layer in any doc, I get this error. Ideas? Thank you
Scott
Hello
Looks like you have "Content Aware" selected in the fill options. If you have a choice and your active layer is empty, Content Aware will give this error. To "pixels opaque source (in your current layer)" to work. For solid colors, pass aware content to one of the other modes.
Please post if this does not fix things for you.
-
MIcrosoft Excel cannot open or save documents more because there is not enough memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files that you no longer have need of the disc you save to.I have 4.75 TB of disk space available. I tried to close open programs and I can't always open attachments.
I did a search on google and found some info that seems to suggest that it is a question of MS Excel /Word.
Read the info on this link:Two comments Anula D'Souza and Gus cops offer different solutions, so try both.
Maybe you are looking for
-
How to re activate memory swap?
"I have disabled memory swap for purposes of test with the command sudo nvram boot-args =" vm_compressor = 1"I tried it reactivation with sudo nvram boot-args =" vm_compressor = 4 ' but it is not working, everyone knows what to do?
-
Need driver card SD WXP Satellite A200 (PSAE6E)
Hello I don't really know where to find these drivers. Anyone know where I can find them? I downgraded to WXP, because the operating system is vista, and now I am facing a problem with the SD card. Thank you in advance
-
iPod nano 4 shows 6 used gig but ipod has nothing about it. Library has no content.
IPod nano 6 g used, 4 shows "other" category. No other content. Physically, IPod has nothing about it. I tried to restore. No luck. Any suggestion would be appreciated.
-
Manager profile and updates the server imacs
We are new to this rehabilitation so much ignorance. We are implementing in our public library 30 off a server imacs mini mac OS X Server (El Capitan). We have MDM, VPP and the Profile Manager. Using the Profile Manager, we can get the updates for
-
Pavilion G6 power on password forgotten by my friend, just trying to help him. stop the 66158175 code