Including the Cisco works views in Foglight dashboards

Similar Questions

• HP Touchpad browser works only with the Cisco Valet Plus router

  I bought a 16 GB HP Touchpad several months ago and had been enjoying his excellent WiFi feature with my old G from Linksys WRT54GS wireless router until I replaced it with a new Cisco Valet Plus (model M20) wireless-N Router a couple of days.

  Although I could easily and successfully, join the Touchpad to the Cisco Valet network, browser fails most of the time to load web pages.   For example, if I go to www.yahoo.com, the browser is going to slowly load the web page, or it will expire with a pop-up message error "Impossible to load the Page.   If I try to select a link from the homepage of Yahoo, it expires with the same message.  And this happens for all web pages.  If the initial page happens at all, I can then from this page a link to any other.

  I know that the issue is not with the router because I have several other devices connected to it and they are all working well, including a laptop HP ProBook, an iPad and a Wii Console, I use to watch Netflix movies on.  None of them has a problem - only the Touchpad.

  If I go into settings-> Wi - Fi, it shows that the Touchpad is connected to Cisco network.  And when I run the diagnostic system, it shows that the Wi - Fi works correctly.

  Does anyone have an idea how to solve this problem?

  I have found a workaround that did the trick.  I had to change the channel setting auto on a coded hard 1 channel wireless.

  Now, the Touchpad works very well, as well as all other devices that have worked.

• In FireFox 13.0.1 I can't open view in Google Maps. I get a blank page. I have two users set up on the computer, (WIn 7) and the second works OK

  Some other videos also will not work. I tried to run in safe mode, but that did not help. I had to use google chrome to see images.

  It started when my wife logged and a message "the user profile service has no logon. Unable to load the user profile.
  When I went in Firefox did not display most of the images such as YouTube. I failed in trying to set up a new user for my wife I did a system restore to several days earlier. It seemed to work, and in fact, Firefox seems to be OK. Then I updated plugins and when I returned to Firefox I can play Youtube videos but not others such as the Google Street View.

  All ideas

  Thanks for the help. I uninstalled Flash 11.3 and installed Flash 10.3. Everything works fine now.

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display the run including the seconds time in the planning work console

  Hello

  Of the work of one of my planning application console, I am able to see HBR including Box plots seconds run time (and not just MM/DD/YYYY HH: mm)

  It is very useful to check accurately the time my HBR!

  However, I am not capable of displaying the seconds on the console of my another planning application. Do you know where to change this option? (I tried to play with the preferences of the user date, but without success)

  Thank you!

  If you go to Administration > Application > settings > current application default > Display Options > Format of Date or it can be changed to File > preferences to override.

  Change the format of date to automatically detect and then he should change in the console work to include seconds,

  Example of

  

  Date in the preferences format has been set to detect automatically, updated and recorded

  

  Return to the console to work

  

  Seconds included.

  See you soon

  John

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried thi

  I have upgraded to Windows 10 64 Pro and all my apps Adobe has stopped working; I get the popular "MSVCP110.dll is missing" issue; I uninstalled everything, including the creative cloud, rebooted the PC and installed it back again! Same thing! I tried this several times. I'm really stuck! Can someone help with how this is solved; I follow online (two solutions) and tried both; not good! No matter what I do, I get the error! The rest of the applications say they are absent from the other files like this; It seems that there is something to do during the installation that keeps this issue alive!

  Run the command to check the file system once:

  https://support.Microsoft.com/en-in/KB/929833

  Also repair Microsoft Redistributable packages from the control panel > programs and features.

  If not installed, download and install the Visual C++ 2013 package.

  Let me know if you need more assistance.

• How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  You can not.  If you want to work with FGLayouts, I recommend drop back to the Release of June 2014 CC before they took the Design of FGLayouts mode.

  You can get the version of June 2014 DW direct links below:

  Win: http://download.adobe.com/pub/Adobe/Dreamweaver/WIN/CC/Dreamweaver_14_LS20.exe

  Mac: http://download.Adobe.com/pub/Adobe/Dreamweaver/Mac/CC/Dreamweaver_14_LS20.dmg

  Solution #2: Modify your CSS FGLayout file by adding an X to the code as shown below.  This trick DW into thinking that it is a normal page, so you can use the new Design view.   NOTE: Do not change the CSS in design Panel.  Do it in Code view.  Record.  Close DW.  New launch DW.

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Nancy O.

• I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect pag

  I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC

  By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.

  Thank you

  Sanjit

• I can't view attachments in my Yahoo email account since I upgraded to Firefox 8. The only option is to download all attachments. There used miniatures at the end of the email to view them. I checked with Internet Explorer and it works properly.

  I can no longer view attachments in my Yahoo email account, since I upgraded to Firefox 8. The only option is to download all attachments. There used miniatures at the end of the email to view them without having to download. I checked my email in Internet Explorer and it's the proper functioning and the thumbnail display. What can I do to solve this problem in Firefox?

  OK, now, they show. I restarted my computer again and they are showing now.

• How to view the 3rd working day of each month.

  Hello
  
  could someone help me with a proc to display the 3 day working rd of each month?
  By day, I mean working Mon - Fri.
  Thank you.

  Hello

  Sorry, I initially responded to the question "what is the * first * work of the month ', which is a little easier.

  Here's a way you can code in SQL:

  ALTER SESSION     SET NLS_DATE_FORMAT     = 'DD-Mon-YYYY Dy';
  
  WITH     got_dates     AS
  (
       SELECT     TRUNC ( ADD_MONTHS (SYSDATE, LEVEL)
                  , 'MONTH'
                  )     AS a_date
       FROM     dual
       CONNECT BY     LEVEL     <= 12
  )
  -- The part above just generates some sample dates
  -- The part below is the actual query:
  --
  SELECT    a_date
  ,       CASE  TO_CHAR ( a_date + 2
                          , 'fmDay'
                    , 'NLS_DATE_LANGUAGE=ENGLISH'     -- If needed
                    )
             WHEN  'Monday'    THEN  4
             WHEN  'Tuesday'     THEN  3
             WHEN  'Saturday'  THEN  4
             WHEN  'Sunday'     THEN  4
                                ELSE  2
         END + a_date     AS third_workday
  FROM       got_dates
  ORDER BY  a_date
  ;
  

  Output:

  A_DATE            THIRD_WORKDAY
  ---------------   ---------------
  01-Nov-2012 Thu   05-Nov-2012 Mon
  01-Dec-2012 Sat   05-Dec-2012 Wed
  01-Jan-2013 Tue   03-Jan-2013 Thu
  01-Feb-2013 Fri   05-Feb-2013 Tue
  01-Mar-2013 Fri   05-Mar-2013 Tue
  01-Apr-2013 Mon   03-Apr-2013 Wed
  01-May-2013 Wed   03-May-2013 Fri
  01-Jun-2013 Sat   05-Jun-2013 Wed
  01-Jul-2013 Mon   03-Jul-2013 Wed
  01-Aug-2013 Thu   05-Aug-2013 Mon
  01-Sep-2013 Sun   04-Sep-2013 Wed
  01-Oct-2013 Tue   03-Oct-2013 Thu
  

  Published by: Frank Kulash, October 4, 2012 17:56

• is it all the same when viewing 'show history' don't see is not only 'date of visit' visit, but duration?

  your view all the history button is FANTASTIC... however... there at - it an option or feature where I don't see only when I last visited this site path on my pc, but also the length of time I've spent on this site or the path?

  Even if the Library dialog box doesn't show each request for a page, only the most recent, the places.sqlite database that stores the history can produce a chronological list requests. In theory, then, you could see the interval between page requests, but you could not spent all the interval, the page view (i.e., coffee break), and if you have opened many links at once reversed between them, Firefox does not save that.

  Once followed package that we assessed to my office includes a feature to record the title of the active window (which would include the active tab in my view) as it changes. This allows you to restore the calendar for the work you have done during the day. I suspect that maybe it's not popular to all users.

  It has not purchased this program, but I see a similar software on the web that you might consider if you wish. For example:

  • TimeTracker
  • Active window title - CodeProject

  I have not tried these myself.

• error 28000 removing the cisco vpn

  When I try to remove the software vpn cisco to my windows xp pro, I get error 28000 say failed to install before the removal of the existing version.it is the only vpn on my pc. I tried several times but to no avail.
  I went to the window registry local machine, then soft and deleted the cisco vpn software. but it does not work.
  any help will be grateful?

  Hello alsky95,

  I do not know what records you remove to uninstall the software, I suggest you to follow the article which you will give information on how to uninstall manually below and upgrade the Cisco VPN Client I found on Cisco's Web site:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_tech_note09186a0080094b7f.shtml

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• PIX 6.3 SNMP MIB, problem with the CISCO-PROCESS compilation - MIB.oid

  I am Edgar Servín

  I have a cactus and got to watch the CPU of the PIX, I got the OID number:

  cpmCPUTotal5sec 1.3.6.1.4.1.9.9.109.1.1.1.1.3

  I used the Cisco SNMP Object Navigator and said:

  Compile the MIB

  Before you can compile CISCO-PROCESS-MIB, you need to compile the MIBS listed below in the order listed.

  Download all of these MIBs (WARNING: does not include non - Cisco MIB) or view details about each MIB below.

  How can I do?

  Hi Edgar,

  compiling the MIBs is necessary only when you are using HP OpenView or something similar. With the cactus, I confess that I have never used myself, but I'm pretty confident that you can just set the OID in Cacti and it will just make a periodic SNMP query for that object.

  HTH

  Herbert

• How can I get the engine working in the ASA 5505 Crypto

  I bought a brand new ASA 5505 to connect to the Cisco 3640 and I can not yet set up the tunnel. I have tried to change the set of transformation to just but know luck. I recently put a VPN using DMVPN and Cisco 501 in a site-to-site, but it has been wondering what happens.

  The router (3640 executes code 12.4) seems ok and I don't think I have a problem with the router with Cisco 501 great work.

  This is a laboratory environment.

  This is the function defined on the ASA 5505

  The devices allowed for this platform:

  The maximum physical Interfaces: 8

  VLAN: 3, restricted DMZ

  Internal guests: 10

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Peer VPN: 10

  WebVPN peers: 2

  Double ISP: disabled

  Junction ports VLAN: 0

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  Assessment of Advanced endpoint: disabled

  This platform includes a basic license.

  This is a ping from 10.3.4.10 to 10.1.1.1. He said nothing about IPSEC or ISAKMP.

  That's what I get when I do the: show crypto ipsec his

  ASA5505 (config) # show crypto ipsec his

  There is no ipsec security associations

  ASA5505 (config) # show crypto isakmp his

  There is no isakmp sas

  Debug crypto isakmp 10

  entry packets within the icmp 10.3.4.10 8 0 10.1.1.1 detail

  I have worked on it for a week and don't really know if I have a bad ASA5505. Since the normal stuff like browsing the Internet works and I can ping to the outside and inside, I don't know what to think. See attachments.

  "Do what you asked has worked.

  Nice to hear that your problem is solved.

  "My question is can I use the transform-set ESP-3DES-SHA instead of MD5?"

  Of course you can.

  Kind regards.

  Please do not forget to note the useful messages and check "Solved my problem", if the post has solved your problem.