Incorrect sampling using TEDS

Similar Questions

• "the password is incorrect" after using Windows 7 Easy Transfer

  The problem is that the 'password is incorrect' after using Windows 7 Easy Transfer.

  I've already studied this problem on the Internet and in online forums.  A lot of people seems to have the same question/problem/question.  Noone has a solution.  Several members of the staff of Microsoft technical support provided responses which do not solve the problem, explain what is happening, or were intended to solve the problem of evil.  For example, many responses were that political Microsoft does not provide assistance when retrieving passwords.  OK, but this isn't what is asked for.  There is a problem and it would be good if someone has recognized that there is a problem and - at least - it is being researched if there is not already a solution.  Anyway, as many have already asked, here is my point of view trying to find a solution to this problem:

  Used Windows 7 Easy Transfer to move user accounts and files between an old 32 bit Vista PC to a new PC 64 bit Windows 7. The transfer was made on a network without using an easy transfer cable. There is no errors during the transfer and user accounts on PC Windows 7 seem to be transferred correctly. Once connected to a user account on the new PC, opens a window titled 'Migration of protected content'. Text indicates that the protected content is transferred and request a password to be entered in a password field. I entered the PC Vista user account password, but the password was not accepted, and this error message is printed "the password is incorrect". All the transferred accounts had exactly the same problem, even if the original Vista PC account password has been entered correctly.

  Studied this problem on the Internet and a suggestion to solve the problem is that the password requested is the STEM of simple transfer is used to start the transfer. I have re-transferred from user accounts and entered to the STEM of easy transfer when windows 'Protected content Migration' asked a password. Always to receive the same error message "password is incorrect" on all user accounts.

  You will need to determine what password is requested. In my view, it should be the original account on the old computer password, but perhaps the easy transfer ROD. If it is not what should it be? If it's neither of the two, which? If it's the original on the old computer account password or easy transfer ROD, why aren't these being accepted because I tried them both. Once the correct password is available, is it possible to open the window of 'Protected content Migration' to enter the password without having to use Easy Transfer to transfer the accounts?

  Finally, what is the protected content that is transferred? How will I know what it is?  It doesn't seem to be something missing in the accounts of user who is easily visible by me. If the protected content is not necessary then not being is not able to access may not be a problem. Because I don't know what content is protected, I have no way to assess if not available is important.

  Pegasus,

  What password? The Windows logon password? Yes

  Have you tried to log on as an administrator? Yes

  Or using your database password key USB key file? No, but why?  I know what are all passwords logon and they seized everything correctly.  Again, the question that must be answered - by someone who knows - what password is asked?  Why are all the suggestions "try this or try that."  Nobody seems to be able to tell which password is requested or why.  What is the protected content that is transferred.  I don't think that there is nothing like DRM content on the original system.  Why this request appears?  Anyone know?

• change a global sample using a spell #.

  How can I change a global sample using a hexadecimal number? The only option I see is to individually enter the RGB numbers in. And a question side, when creating a new shade, how can I automatically make a spot color? Who doesn't want their color chart to be global?

  

  First part of your question: dialogue in the shade Options you can change the color Mode 'Web save RGB' (somehow outdated) and using hexadecimal values.

  Second part: command-click on the new button nuance in the Swatches palette to create a spot color (in previous versions of Illustrator, it can be Alt-click).

• CS6, "Select unused shades" is to select the samples used.

  In Illustrator CS6, "Select unused shades" is to select the samples used. I'm doing something wrong or is this a bug?

  I can't reproduce this in CS6 (Cloud, 16.2.1). version

  Maybe someone can check in 16.0.4 (?) so the problem can be reproduced.

  You can check if you updated to the latest version available.

• Aggregation in IR works incorrectly when using calculated columns breaks

  I have a problem with the aggregation in IR when using stops on calculated columns.
  
  Please see the exact steps to reproduce the problem in my next post below
  
  Martin
  
  Published by: Martin Krepelka, October 22, 2008 11:18

  Martin,

  I filed a bug about the problem you are having. The problem is when you control break on a calculated column with defined format mask and aggregates, the aggregate information is not displayed correctly. When I run the interactive report in debug mode, I see that analytical for aggregated information function partitions incorrectly. Using your example:

  IR runs this query to get the counts for each month of posting:

  count("AMOUNT") over (partition by "POSTING_DATE")
  

  Instead, it should run this query:

  count("AMOUNT") over (partition by to_char("POSTING_DATE",'RRRR/MM'))
  

  To work around the problem, you can change the calculation month without the format mask view and set to_char(F,'RRRR/MM'). Aggregates will display correctly.

  Christina

• Lack of first samples using digitizer Tclk and function generator

  Hello

  I have a pxi-5922, an arbitrary signal 5412 generator. They are synchronized due the Tclk. The question I have is that I can not capture the start of production of function generators. I tried the positions of different reference for the scope, but am unable to quarter at the beginning.

  I tried to have the function generator and digitizer as the master, this does not seem to help with my question.

  Is there something else I could try to capture the start of the release of gen func using Tclk.

  See you soon,.

  Brett

  So the 5922 has a delta sigma converter that will cause a delay of the sample during synchronization with other cards, the same as our DSA cards.  It is the delay of the sample we see and has nothing of synchronizy we can do to get rid of him.  What I would recommend is to generate samples 62 "junk" at the beginning of your waveform.

• JDE samples using

  Hello! I am new to blackberry development and also new with. I have installed applications development strat for BB and made some simple applications like Hello everyone and some user interfaces. But now I want to try the JDE samples, but I can't make it work... anyone have a detailed procedure so that they work in the Please? Thank you!

  Sample I provided is for Blackberry Java Development Environment tool.

  I do not use Eclipse, because its flaws make me sad

  If you like Eclipse, you can create an empty project and use files java source to the sample I provided.

• Simultaneous sampling using two cards PXI-6562

  Hi all

  I was wondering if it is possible to have two examples of cards PXI-6562 (e/s LVDS high flow) at the same time using the same trigger?

  Thanks in advance,

  Nathan

  Hello

  You can synchronize certainly several MSC devices, including modular instruments to NI HSDIO.  The most effective way to proceed is to use the NOR-TClk synchronization API.  It is provided with several of our drivers of modular instruments and devices, including NOR-HSDIO.  The first part of this knowledge base explains the use of the NOR-TClk functions for that.  This tutorial gives a very thorough introduction timing and synchronization using the API OR-TClk.

  If you are more concerned with programming in fact such a request, I would check the NOR example Finder for some good examples.  "" "" Navigate up to material input and output "modular instruments and devices" NOR-HSDIO "synchronization" to several features of dynamic Acquisition (TClk) .vi

  Jon S
  

• Incorrect display using the loop format for

  Hello

  I have a digital painting using a hexadecimal display format that is autoindexed by a loop for. Within the loop for each unique value is passed to a Subvi needed the hexadecimal display format. Unfortunately, indexing is not keep this hex format but transfers back to a decimal number.

  No idea how to solve this problem?

  Thanks in advance and best regards

  Simon

  Thanks for this tip. The problem was an another Subvi where I created the num-array that will subsequently in the loop for., all the digital elements where the value instead of I32 I16. The controller could not handle these false values, so I got a nonsense.

  Thank you very much for your quick responses!

• Sample using XMLTYPE out parameter

  Hi all

  plenty of examples of using ODP.NET and XMLTYPE out parameter source code?

  PROCEDURE OBTENER_DATOS_DESPLIEGUE (pPROYECTO IN VARCHAR2,

  pETIQUETA IN VARCHAR2 DEFAULT NULL,

  pMOMENTO OUT TIMESTAMP,

  XMLTYPE OUT pDATOS)

  And for testing: function and procedure.

  
  

  FUNCTION FRKDATA_GET_XMLTYPE(num IN NUMBER, xml1 IN XMLTYPE) RETURN XMLTYPE IS
  xmlout XMLTYPE;
  BEGIN
  SELECT XMLTYPE_COL
  INTO xmlout
  FROM POC_TEST_XML_TABLE
  WHERE NUM_COL = num;
  RETURN xmlout;
  END FRKDATA_GET_XMLTYPE;


PROCEDURE FRKDATA_TESTXML(qry in VARCHAR2, rslt OUT XMLTYPE) AS
BEGIN
rslt := dbms_xmlgen.getxmltype(qry);
END FRKDATA_TESTXML;

  
  

  See https://entlib.codeplex.com/discussions/454750

  I get an error "the connection is closed.

  Only, I found this example, but without OUTPUT parameters.

  /*
create or replace function xmlproc(v1 in xmltype) return xmltype is
begin
return v1;
end;
/
*/

using System;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;

class Program
{
    static void Main(string[] args)
    {
        using (OracleConnection con = new OracleConnection())
        {
            con.ConnectionString = "user id=scott;password=tiger;data source=orcl";
            con.Open();
            using (OracleCommand cmd = new OracleCommand("",con))
            {
                cmd.CommandText = "xmlproc";
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.Parameters.Add(new OracleParameter("return", OracleDbType.XmlType)).Direction = ParameterDirection.ReturnValue;
                cmd.Parameters.Add(new OracleParameter("v1", OracleDbType.XmlType)).Direction = ParameterDirection.Input;
                cmd.Parameters["v1"].Value = "<a>b</a>";
                cmd.ExecuteNonQuery();
                Console.WriteLine(((OracleXmlType)cmd.Parameters["return"].Value).Value);
            }
        }
    }
}

  The below works for me.

  -------------

  PROCEDURE "XMLPROC")

  'PARAM1' OUT XMLTYPE) IS

  BEGIN

  Param1: = dbms_xmlgen.getxmltype ("SELECT name of EMPLOYEES WHERE EMPLOYEE_ID is 100');.

  END;

  -------------

  			Con OracleConnection = new OracleConnection();
  			con. ConnectionString = conString;
  			con. Open();
  			OracleCommand cmd = con. CreateCommand();
  			cmd.CommandText = "xmlproc;

  cmd.CommandType = CommandType.StoredProcedure;

  cmd. Parameters.Add (new OracleParameter ("xmlout", OracleDbType.XmlType)). Direction = ParameterDirection.Output;

  cmd ExecuteNonQuery());

  Console.WriteLine (((OracleXmlType) cmd.)) Parameters ["xmlout"]. (Value). (Value);

• Incorrect value using JavaCast call HSSFWorkbook float

  I use the HSSFWorkbook to java object to create Excel spreadsheets. The variable 'est_outgoing_cost' is is filled to 1.51. When I open the created poster 1.51 cell worksheet. However, the actual value of the cell is 1.50999999046325. Any ideas why it subtracted from 1.51?

  > cellValue = javaCast (arguments [3], val);
  > cell.setCellValue (cellValue);

  You are casting the value as a "float". You could try to cast on "double".

  
  cell.setCellValue (javaCast ("double", val));
  

• Incorrect screen used for replacement

  I just had the LCD replaced under warranty on my W530. I had the 1920 x 1080 FHD + Panel. they were replaced with the 1366 x 768 Panel. should I call Lenovo about this?

  Yes, you must call them about it.

• 3 physical disks in 1 TB in RAID 5 with only its 1 TB usable space incorrectly? Using a Dell PERC 6 / i controller.

  We have a server Dell PowerEdge with a PERC 6 / i controller. There are three physical disks for 1 TB. I created a RAID 5 array, but it seems that there is only 1 TB of usable space after you initialize the virtual disk RAID 5.

  What is wrong? I Googled what should be the size, and I think we should not 1 TB, 2 TB of usable space?

  Too bad. It looks like the physical disks are 500 GB in size, which makes sense.

• Hard drive space used/free info displayed is incorrect

  My hard disk space used and the space free information apparently enormously out of proportion to the actual use. Can't understand why.

  Details:

  My disk C (683 GB) indicated (including the Information and records management system) as having 140 GB of used space.

  I find that about 42 GB, including hidden files, system files, swap file and hiberfil.sys.

  My computer came with the SATA 750Go unique fully formatted and whose 683 GB C drive and a recovery disk 15 GB D.

  I want to reduce C & create a new partition for documents before installing some new important software on C.

  I am reluctant to shrink, or install new software, until I have find the mystery of this 100 GB of files to inventory.

  I ran disk cleanup and Defragmenter. No change in the amount of space used / free display.

  When I click the icon of the C in disk management and choose shrink, he says I can reduce C only to about 500 GB. I understand that shrink should be done several times to get full party, so presumably he would get smaller. I the have not used yet, but because of the concern/mystification about the reasons for this apparently incorrect space used for the drive.

  I have Vista Home Premium (64-bit). I don't have a shadow copy volume.

  I have not installed or changed anything significant since buying the computer, nor what I made a backup to C or D or large file transfer done.

  Any help would be most appreciated. Thank you.

  Hi Virginia2332,

  You mentioned that the total size of the hard drive is 750 GB and also mentioned that the size is 683 after formatting and 15 GB recovery partition that add up to 698 GB. So where's the advantage remaining 52 GB.

  You have another partition outside C and D.

  However, I suggest you perform a check disk on your computer that will rectify the bad sectors, if any. Bad sectors will also be counted as used space.

  CHKDSK (Chkdsk.exe) is a tool for command line that checks volumes of disk for problems and attempts to fix everything what it finds.

  1. click on Start.

  2. type cmd in the search box start and press to enter.

  3. type the following command at the command prompt: chkdsk driveletter: / f/r (chkdsk c:/f/r)

  4. check the size of the hard drive.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I am trying to open my child hotmail account using my itouch. However get the message incorrect password.

  incorrect password using itouch error message

  I am trying to open my child hotmail account using my itouch.  However get the message incorrect password.  I double checked that I am entering the correct password, but always without success. The hotmail account is protected by using parental controls.

  Any help appreciated.

  Hi 5pesh,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

  Reference: http://www.windowslivehelp.com/