Increase (or decrease) the authentication level using OAM user Plugins

Similar Questions

• HP ac024 tx: can not increase or decrease the brightness

  Hi, I installed Win 7 64 bit on my computer. Im not able to see the options to increase or decrease the brightness on my PC. Please help me with this, the question seems low, but could do nothing. I installed all the drivers available, but cannot find the display drivers for my model. I tried some google steps for... anything!

  Arungraj22 wrote:

  ... question seems small, but could do nothing. I installed all the drivers available, but cannot find the display drivers for my model...

  Hello

  Your machine came with FreeDOS, this question is not small:

  http://support.HP.com/SI-en/document/c04746482

  It uses Intel HD Graphics 4400. All the drivers for this machine should be on the following link:

  http://support.HP.com/in-en/drivers/selfservice/HP-15-notebook-PC-series/7771404/model/8326082

  Your machine needs a driver Intel graphics high definition (HD).

  You must install the Driver and Intel Chipset Installation Utility and driver Intel Management Engine Interface (MEI) and restart the machine first.

  After all this, you need the following driver to use the keyboard shortcut:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_129672_1

  Kind regards.

• How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  I'll answer one of your three messages that asked this question.  If possible, please remove the other two.

  Hover and dragging moves the axis as it should.  The cursor turns into a hand to indicate the area brushed, it moves.

  Hover over the pin code, press the Alt/Opt key and drag left and right and the effect will become less and more.   The cursor turns into a two-headed arrow to indicate that the function of the drag has changed.  If you are not hovering over a pin code and press the Alt/Opt, then the cursor turns into a brush to erase to remove the adjustment every time you paint.

• Authentication to the multi level in OAM - use authentication Plugin

  Hi all
  
  Please post your useful suggestion to reach the following requirement:
  
  The requirement must authenticate with username, password-I & II - password. To do this, so I need to customize the authentication form.
  I use OAM 10.1.4.3 wherein there is no auth plugin code example in the folder of the example mentioned in the developer's guide!
  
  So I try with the sample files available with OAM old version 10.1.4.1. There is a single file (makefile) DSP based window and I am working on Linux. Could someone help me to convert this file to a Linux compatible file?
  
  There is no clear instructions on customizing the authentication in the Dev guide scheme, so it will be great if someone could help me with this.
  
  See you soon,.
  Ashish

  Verification of authentication scheme - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32420/v2authen.htm
  and for the creation of authorization plugins check - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABJJFCE

  An example of authentication plugin is also present at-http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/e10355/authnapi.htm#BABFEAIA

  Create a makefile for linux should not be that difficult, here is an example of makefile you can use for your reference...

  #Make file for authentication and authorization plug-ins

  AUTHNAME auth =
  AUTH_SO_NAME = auth

  SRC_DIR =.
  Inclure_rep = include

  LIBNAME = auth.so
  SOURCES = auth.c
  OBJS = $(AUTH_SO_NAME) .o
  LIBS =

  INCLUDE_FLAGS = - I$ (INCLUDE_DIR)
  #ldflags case
  LD_FLAGS = - lodbc

  CC = gcc

  CC_CMD = $(CC) - D_REENTRANT
  LD_CMD = $(CC) - shared

  $(LIBNAME): $(OBJS)
  $(LD_CMD) $(OBJS) $(LD_FLAGS) o $@ $(LIBS)
  chmod + x $(LIBNAME)

  $(OBJS): $(SOURCES)
  $(CC_CMD) $(INCLUDE_FLAGS) $(CFLAGS) - c-o $@ $(SOURCES)

  clean:
  rm - rf $(OBJS) $(LIBNAME)

  #end

  Let me know if you need anything else, be it
  Sam

• Unable to switch to the privilege level using password set using ACS enable

  Hi all

  I am not able to not be able to visit the privilege level to help enable password set using ACS 1121 (5.4.0.46).

  Please find details of the ASA-

  ASA5580-20
  version of the software - 9.1

  LAB - FW / see the law # run | I have aaa
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (inside) host 192.168.x.x
  GANYMEDE + LOCAL console for AAA of http authentication
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA authentication enable console LOCAL + GANYMEDE
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet accounting AAA GANYMEDE +.
  AAA accounting console GANYMEDE + ssh
  AAA accounting enable console GANYMEDE +.
  No vpn-addr-assign aaa

  I created the Shell profile so & given privilege 15 it.please find wink 1 similarly in word doc attached

  However, when I try to create the service profile I get the error message, please find snap 2 in word doc attached.

  Kindly share your expertise.

  Hello Dominic,.

  For authorization privileges to take effect, you must add the following command to your configuration on the ASA:

  AAA authorization exec-authentication server

  After adding it, the ASA will take into account the level of privilege that are sent by the ACS.

  Associated with the error you are getting on the graphical interface of the ACS, please make sure that you are using a browser supported for ACS 5.4 version based on the release notes:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Note: Please mark it as answered as appropriate.

• Disable the logging level for individual users

  Hello

  We want to stop individual users to record level. Usually, we go to identity and click on the user to set the log level '0', but we have LDAP security settings don't so have no idea how to do.

  All ideas

  Thxs

  SYK

  LDAP?

  Still, you can see the RPD users when

  IM-> Action-> Set Online user filter specific user

• Configure the Jar Versions at the site level using OSGI

  Hello

  We have a utility class deployed as bundle OSGI which is used in two different sites, now I need to update this useful for a single site and the other site should not be affected by this change. How can I configure the version of the POT to the site/component level to achieve this?

  Concerning

  Deepika

  Let's say that your package exports the com.myco.util package. You have two beams export this package, one with version 1.0.0 and the other with the 2.0.0 version.

  You want to use the version 1.0.0 on Site A and version 2.0.0 on Site B.

  In the package containing the servlet used on Site A, you would incorporate com.myco.util; version = [1.0.0,2.0.0). In the package containing the servlet used to Site B, you would be important com.myco.util; version = 2.0.0

  Note that this will not work for scripts. All scripts use the same dynamic class loader no matter where the script is contained.

• Moving all the newspapers and Materialized View at the schema level using the data pump in

  Hi Experts,
  
  Please help me on how I can exp/imp all materialized views andMV logs (as are some MVs) only the full scheme of other databases. I want to exclude everything else.
  
  Concerning
  -Samar-

  Using DBMS_METADATA. Create the following SQL script:

  SET FEEDBACK OFF
  SET SERVEROUTPUT ON FORMAT WORD_WRAPPED
  SET TERMOUT OFF
  SPOOL C:\TEMP\MVIEW.SQL
  DECLARE
      CURSOR V_MLOG_CUR
        IS
          SELECT  DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW_LOG',LOG_TABLE) DDL
            FROM  USER_MVIEW_LOGS;
      CURSOR V_MVIEW_CUR
        IS
          SELECT  DBMS_METADATA.GET_DDL('MATERIALIZED_VIEW',MVIEW_NAME) DDL
            FROM  USER_MVIEWS;
  BEGIN
      DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
      FOR V_REC IN V_MLOG_CUR LOOP
        DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
      END LOOP;
      FOR V_REC IN V_MVIEW_CUR LOOP
        DBMS_OUTPUT.PUT_LINE(V_REC.DDL);
      END LOOP;
  END;
  /
  SPOOL OFF
  

  In my case the script is saved as C:\TEMP\MVIEW_GEN. SQL. Now I will create a journal mview and mview in schema SCOTT and run the script above:

  SQL> CREATE MATERIALIZED VIEW LOG ON EMP
    2  /
  
  Materialized view log created.
  
  SQL> CREATE MATERIALIZED VIEW EMP_MV
    2  AS SELECT * FROM EMP
    3  /
  
  Materialized view created.
  
  SQL> @C:\TEMP\MVIEW_GEN
  SQL> 
  

  Run the C:\TEMP\MVIEW_GEN script. SQL generated a C:\TEMP\MVIEW queue. SQL:

    CREATE MATERIALIZED VIEW LOG ON "SCOTT"."EMP"
   PCTFREE 10 PCTUSED 30 INITRANS
  1 MAXTRANS 255 LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1
  MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL
  DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE "USERS" 
  
  WITH PRIMARY KEY EXCLUDING NEW VALUES;
  
    CREATE MATERIALIZED VIEW "SCOTT"."EMP_MV" ("EMPNO", "ENAME", "JOB", "MGR",
  "HIREDATE", "SAL", "COMM", "DEPTNO")
    ORGANIZATION HEAP PCTFREE 10 PCTUSED 40
  INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576
  MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
  BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE
  "USERS"
    BUILD IMMEDIATE
    USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 
  
  STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
  
  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE
  DEFAULT CELL_FLASH_CACHE DEFAULT)
    TABLESPACE "USERS"
    REFRESH FORCE ON
  DEMAND
    WITH PRIMARY KEY USING DEFAULT LOCAL ROLLBACK SEGMENT
    USING ENFORCED
  CONSTRAINTS DISABLE QUERY REWRITE
    AS SELECT "EMP"."EMPNO"
  "EMPNO","EMP"."ENAME" "ENAME","EMP"."JOB" "JOB","EMP"."MGR"
  "MGR","EMP"."HIREDATE" "HIREDATE","EMP"."SAL" "SAL","EMP"."COMM"
  "COMM","EMP"."DEPTNO" "DEPTNO" FROM "EMP" "EMP";
                                 
  

  Now, you can run this on the database. You may need to adjust the tablespace and storage clauses. Or you can add more DBMS_METADATA. SET_TRANSFORM_PARAM calls to C:\TEMP\MVIEW_GEN. SQL to force DBMS_METADATA not to include the tablespace or / and the terms of storage.

  SY.

• How to increase or decrease the distance between letters in iBA

  I can change the distance between the lines of writing, but I don't know how change the distances between letters, to make the point more dense or lighter, could you please tell me how to do? If this is possible. Or should I go back to programs to make and then import it again into Indesign or Word iBA? Seems very troublesome and inefficient... must be a path inside the International Bar Association, so if you know I'd appreciate your comments. Thank you.

  iinspector > text > text > spacing > character

• increase or decrease the targeted window hotkey

  Hello

  I have Windows 7 Pro w / focus follows mouse (and editing the registry where it triggers automatically window).

  What I would like is to set the Alt-2 to trigger the targeted window (above all other windows, no resizing) and Alt-3 to reduce the target window (behind all other windows, no resizing).

  Is it possible w / no 3rd party applications?

  Thanks, Jim

  Hi Jim,.

  By design, it is not possible. You can only do it by pressing 'Ctrl' and the keys ' + '.

• LCC - how to hide "First name" + "Second Name" on the cursor when using multi-user "SharedWhiteBoard."

  I have a Flex Web application and uses the following controls "ConnectSessionContainer" and "SharedWhiteBoard". I run few cases of applications and inside the Whiteboard changed something (example: cordinate, size) it is clear from this development spread hollow LCC to another application connected to the same room and show the cursor 'First Name', 'Second name' + 'connection ID/number.

  Issues related to the:

  
  -How can I hide/change label = text on the slider. I mean "First Name", "Second name" + "connection ID/number.
  -J' changed in my adobe "First Name" + "Second Name" profile, but is not propagated in the Whiteboard why?
  -Next time when I run the app 'Connection ID/number' incremented even if narrow application and start again. How to manage this part? I mean do not multiply

  Hello

  Try to explore the API SharedWhiteBoard.model.sharedCursorPane.labelField to get and set the displayName property cursors.

  Thank you

  Arun

• The same level everywhere in the sound project

  Hello

  I have the 14 items first.

  My film was shot in several places with different volumes.

  Y at - it a command that does the same noise level throughout the film?

  Thank you

  Eli

  There is no auto command for this.

  However, if you open the Audio Mixer Panel (under the Tools menu), you can monitor your levels and make sure they peak between-6 and zero. And you can adjust the levels for each video clip by increasing or decreasing the "elastic" yellow which crosses each clip.

  Don't trust your ears or your computer speakers. Use the Audio Mixer Panel to make sure that you analyze your audio levels with precision.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Protect OIM 11 g self-serve by using OAM 11 g

  Hello
  
  We have the following components installed in my customer's environment and we didn't OID or installed OVD.
  
  1 oracle Identity Manager 11 g
  2. oracle 11 g Access Manager
  3 oracle Directory Server EE - storage of identity for OAM
  
  Here, my requirement is to protect the IOM by using OAM self-service application. I am aware that there is an integration of IOM - OAM approach suggested by the Oracle as in the link below. And he speaks of the OID and OVD, they mention but unclear on the role of the OVD in the integration (if it is mandatory or not).
  
  http://download.Oracle.com/docs/CD/E21764_01/ doc.1111 /e15740/OIM.htm#insertedID2
  
  And the other approach is what I protect IOM self-service application in OAM as a regular web application. If I do, what all the headers/cookies do I need pass to activate SSO on the side of the IOM.
  
  I'm looking experts suggestion here for self-service IOM protection. Thank you in advance.
  
  
  Concerning
  Ashok

  To achieve this there are no dependencies on OVD or OID. You have two options:

  1 take advantage of the domain agent
  2. set up a web proxy with a WebGate to the self-service IOM URLS. Configuration of an OAM identity Asserter to consume a header went the WebGate (OAM_REMOTE_USER by default). You could pair it with IOM or Department authentication provider.

  I recommend the latter. You can turn off the field agent with - DWLSAGENT_DISABLED = true

• Y at - it a keyboard shortcut to raise the audio level upwards or downwards by a 1db?

  In Final Cut Pro, you can select a single item, or a track or group of clips, and press on the + or - button to increase or decrease the volume of the clip, 1 dB at each tap, so you can quickly make this slight change in the volume of perhaps a music or voice to follow and quickly see how it changes the relationship between the music and the voice , or something similar.

  I know that you can manually change the audio levels of clips in Premiere Pro by pulling on the audio lines..., I know you can navigate VIDEO - AUDIO OPTIONS and punch in a db of change as well, but none of these options are are fast as CONTROL + or - to continue to see how 1db upward or downward change affects balance.

  Is there a keyboard equivalent in Premiere Pro?  Thanks in advance for your help.

  In CC, there are a few new shortcuts for "Clip Volume"... Finally!

  They go by increments of 1 dB or 6db. I would prefer 3db, but better than nothing.

  UPDATE: in fact, in preferences > Audio, you can adjust "Volume off." Yay!