Increase the display right

original title: setting screen

My son accidentally changed his laptop screen so that it is upside down now how I recover the right way

Press Ctrl & Alt keys and use the arrows to rotate back.
 
According to the graphics card on your computer, these can be alternatives.
 
Right click on the desktop | Graphics options | Rotation.
 
Right click on the desktop | Screen resolution | Orientation.

Tags: Windows

Similar Questions

  • How to increase the size of the icons in the notification area (lower right corner of the XP taskbar)

    For some reason when I booted up my laptop, the icons were tiny and too small for my eyes. I think it was related to the installation of TestOut LabSim software on the laptop, because I noticed that the problem after doing so.

    I was not yet aware that it was possible to adjut the size fo the icons in the notification area. All the links I found affect the icons in the start menu, or quick launch menu, but not the notification area.
    The notification area is now two-lines, if it used only one, but the size of the taskbar has not changed. My DPI settings are always set to 'large '. The display resolution is unchanged.

    The thing where you right-click the taskbar, choose 'Properties', then click on "Start menu", then customize, then choosing "large icons" is only the start, not the notification area menu. It is also already on large icons.
    In addition, the thing where you right click on the Quick Launch bar and ends by choose "large icons" affects only the Quick Launch bar, not the right notification icons.

    http://www.Flickr.com/photos/10736018@N05/5876069573/sizes/l/in/photostream/

    How do I do the large icons again so I can actually see them? My eyes are not more perfect, and I would rather not be squinting when using my laptop. I think seriously increase the DPI to 150% in its current form.

    Hi bhermance,

    Method 1

    Try the steps mentioned below and see if it helps.

    one) to open display, click Start, click Control Panel, click appearance and themes, and then click display.

    (b) click on the appearance tab, then Advanced.

    (c) now select buttons of legend in the list of items and increase the size.

    (d) click OK and apply

    Check if that helps.

    Method 2

    If the previous step fails, then I suggest that you uninstall TestOut LabSim software of the computer and check if it helps.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

  • Why isn't the lock is displayed in the lower right of the screen for a secure site?

    After updating Firefox, I tried to order an item on Amazon.com. When I clicked on THE PAYMENT page button appeared with https displayed in the box, as expected, but the closed padlock was not displayed in the lower right of the page. The same result occurred when I repeated my attempt to place an order. The display in the address box of the page on which I am in my note also has the https protocol, but the lock is missing. I don't know if the page is protected.

    In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.

    The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.

    So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.

    The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.

    See also:

    You can use this extension to get a lock on the address bar.

  • When I maximize a window I can't display the date in the lower right. Why?

    When I maximize a window I can't display the date in the lower right. Why?

    With what application window, you are facing this problem?

  • Is it possible to change my graphics or monitor to increase the brightness of the screen, Windows, but outside the display properties?

    Picture Dim
     
    Is it possible to change my chart or monitor to increase the brightness of the screen, Windows, but (outside), I realize I ask for much because my machine is a 10 inch netbook ca. 2008, and the bios has very few options available user. The computer runs on XP (SP3) with input would be welcome.
    I hope yours,.
    Paul R.

    Hi Paul R.

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Run the fixit of the article.

    Troubleshoot Windows display the text on the monitor is not readable

    Method 2: Follow the steps in the article.

    Resources for troubleshooting problems in Windows XP

  • I racer Ferrari 1000, right key is damaged so I can't increase the brightness of my screen.

    I racer Ferrari 1000, right key is damaged so I can't increase the brightness of my screen.

    I'm glad that you guessed it work.

  • When I right click of my mouse I do not get the properties option. I need to increase the resolution to fit a bigger screen.

    When I right click of my mouse I do not get the properties option. I need to increase the resolution to fit a bigger screen.

    It's not real estate in Vista customize. Then look at the last option.

  • Is it possible to increase the width of the panels on the left and right if the sides during the import of images?

    Is it possible to increase the width of the panels on the left and right if the sides during the import of images?

    Lol the side panels in the import window are of fixed size.

  • MAF List view does not display an arrow at the far right image

    Hello

    I was working with the list of CRG Oracle view to create a page of the AMX.

    When I was with to create ListView data control, this isn't the display ar the right end of the list of the arrow.

    I have used showLinkIcon = 'true' also to display the link icon, but does not display is not the icon.

    Here's my AMX page for reference.

    <? XML version = "1.0" encoding = "UTF-8"? >

    " < amx:view xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xmlns:amx =" " http://xmlns.Oracle.com/ADF/MF/AMX "" "

    ' xmlns:dvtm = ' http://xmlns.Oracle.com/ADF/MF/AMX/DVT "> "

    < amx:panelPage id = "pp1" >

    < amx:facet name = "header" >

    < amx:outputText value = "List of reports" id = "ot1" rendering = "true"

    inlineStyle = "color: Navy;" text-align: center; make-weight: bold; "/ >

    < / amx:facet >

    < amx:tableLayout id = 'tl2' width = '100% ' inlineStyle = ' color: ActiveCaption; "borderWidth ="0">

    < amx:rowLayout id = "rl3" >

    < amx:cellFormat id = "cf4" width = "85%" >

    < amx:panelFormLayout id = "pfl2" >

    < amx:selectOneChoice value = "#{pageFlowScope.selected}" label = "#{' ' groups :'}" id = "soc1"}

    valueChangeListener = "#{pageFlowScope.ReportControlAction.onGroupChange} '"

    inlineStyle = "color: Black;" make-weight: bold; ">

    < amx:selectItems value = "#{bindings.groups.items}" id = "si1" / > "

    < / amx:selectOneChoice >

    < / amx:panelFormLayout >

    < / amx:cellFormat >

    < amx:cellFormat id = "cf5" width = "15%" >

    < amx:commandLink id = action = "#{"cl1"pageFlowScope.ReportControlAction.onClickOfGroupChange}" >

    < amx:image id = source="/Images/go.png"/ 'i1' >

    < / amx:commandLink >

    < / amx:cellFormat >

    < / amx:rowLayout >

    < / amx:tableLayout >

    < amx:listView styleClass = "listView-adfmf-insetList" var = "row" value = "#{bindings.reports1.collectionModel} '"

    fetchSize = "#{bindings.reports1.rangeSize} '"

    selectedRowKeys = "#{bindings.reports1.collectionModel.selectedRow} '"

    dividerAttribute selectionListener = "#{bindings.reports1.collectionModel.makeCurrent}" = "reportType" "

    dividerMode = 'all' showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "lv2.

    collapsibleDividers = "true" showDividerCount = "true".

    inlineStyle = "vertical-align: middle;" color: gray; font-size: small; ">

    < amx:listItem id = action = "#{pageFlowScope.ReportControlAction.displaySelectOption"li2"} '"

    showLinkIcon = "true" >

    < amx:tableLayout width = '100 percent' id = 'tl1' borderWidth = "0" >

    < amx:rowLayout id = "rl2" >

    < amx:cellFormat width = '26px"rowSpan ="2"id ="cf1"halign ="center"valign ="middle">

    < amx:commandLink id = action = "#{"cl2"pageFlowScope.ReportControlAction.onClickOfPinReport}" >

    < amx:image id = "i2" source="/Images/pinandadd.png"/ >

    "< amx:setPropertyListener id = from =" #{row.name "spl1"} "to =" #{pageFlowScope.reportName} ".

    type = 'action' / >

    < amx:setPropertyListener id = from = "#{row.description"spl2"} '"

    to = "#{pageFlowScope.reportDescription}" type = "action" / > "

    < amx:setPropertyListener id = from = "#{row.id"spl3"} '"

    to = "#{pageFlowScope.selectedReportID}" type = "action" / > "

    < amx:setPropertyListener id = from = "#{row.isParameterized"spl4"} '"

    to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

    < / amx:commandLink >

    < / amx:cellFormat >

    < amx:cellFormat height = "28px" id = "cf2" halign = "DΘmarrer" valign = "middle" >

    < amx:outputText value = "#{row.name}" id = "ot4" inlineStyle = "font-size: x-small; color: Navy; "/ >

    < / amx:cellFormat >

    < / amx:rowLayout >

    <!-< amx:rowLayout id = "rl1" >

    < amx:cellFormat width = '100% ' halign = "DΘmarrer" valign = "middle".

    inlineStyle = "text-align: left;" exceeding capacity-wrap: break-word; ">

    < amx:outputText value = "#{row.description}" id = "ot3" "

    inlineStyle = ' color: gray; " font-size: x-small; Police-weight: lighter; text-align: left; make-style: italic; "/ >

    < / amx:cellFormat >

    < / amx:rowLayout >->

    < / amx:tableLayout >

    "< amx:setPropertyListener id ="spl5"from =" #{row.name} "to =" #{pageFlowScope.reportName} "type ="action"/ >

    "< amx:setPropertyListener id = from =" #{row.description "spl6"} "to =" #{pageFlowScope.reportDescription} ".

    type = 'action' / >

    "< amx:setPropertyListener id = from =" #{row.id "spl7"} "to =" #{pageFlowScope.selectedReportID} ".

    type = 'action' / >

    < amx:setPropertyListener id = from = "#{row.isParameterized"spl8"} '"

    to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

    < amx:actionListener id = "al1" type = "swipeLeft".

    Binding="#{pageFlowScope.ReportControlAction.onSwipeToPin}"/ >

    < / amx:listItem >

    < / amx:listView >

    < / amx:panelPage >

    < / amx:view >

    Can someone please help me to solve it.

    Thank you

    Ajoy Sinha

    According to the following thread: https://community.oracle.com/thread/3592578 ... On Android, it is normal that the arrow is excluded and available on iOS, to meet the relevant guides to style of the different platforms.

    CM.

  • How can I increase the space of name display in the form, material and specification of the nutritional profile?

    Problem:

    1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

    2. how to increase display space for the name of the sheet in the history section at the top of the screen?

    Thank you

    Hello Nefertari,

    You try to view more characters in these areas?

    Each of these locations is plugable using custom plugin extensions.

    For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

    I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

    It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

    Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

    See this older post for more information https://community.oracle.com/thread/2562965

    Is that what you're looking for?

    Dmitriy

    .

  • I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

    I can get to resize the display bar at the bottom right. It extends off the screen. Help, please?

    Irene

    Have you tried the resize in the window upper right button.  There are 3 buttons, we close the window one he minimized no date limit it and the other allows to switch between full screen and a smaller screen.  Click on the last one and see what happens.

  • increase the font size in the window display of the Code

    I recently bought one in 27 iMac and I found out that the font size in the view of the Code in split view window is so small, I read it now is no longer. Is it possible in CS3, version 9.0, to increase the font size in the part of the Code in the window display?  My eyes more thanks.

    PREFERENCES > fonts

  • Increase the number of lookup values display only once the research of windo

    Hi all

    Must I increase the number of display of the values of result on a search (search for say, organization) window on the administration and the user console.
    Currently, it is 10.

    How can I do this?

    Kind regards
    Chaturanga

    Modify the JSP

  • I use a 43 in. TV as monitor and have trouble reading the text in the drop-down menu (file, editing, display etc.) boxes. Is it possible to increase the size?

    I downloaded the theme and font size changer, but I cannot increase the size of the text in the drop-down menus. I sit 10 ft away from the TV with a wireless keyboard. Even when I Zoom on the page of the menu drop-down does not increase in size. With the help of a mini Mac OSX 10.3

    I think that the solution is a TV 60 ", but I hope we can find a more affordable solution!

    I think that the menu bar on Mac OS X.

    [Apple] Window helps the Firefox Edit View History bookmarks file tool

    -wouldn't be likely changes via an add-on or a parameter of Firefox.

    However, as a Windows user, I am at a disadvantage by experimenting.

    I've seen a number of discussions on the forums of Apple, without a clear solution:

  • Want 492nd-810: A display of strange images on the upper right corner of the screen

    Hi, I bought this PC Dec last and only after using for some time later that I keep seeing this strange image in the upper RIGHT of the screen. Sometimes it disappears, but the problem is it hinders my screen and cannot 'close' or move it. Please notify. Thank you

    Isatay, welcome to the forum.

    If you're talking about the black box with the white line in the middle with the x, it's your sound control and the x means that it has been muted.  You should find the button mute and press it.  This should make them disappear.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

Maybe you are looking for