Initiate the process: clarification needed

Similar Questions

• on port 162 java.exe running. I tried to kill him with the command prodess k 1289. 1298 here is the process ID. but it comes back again. I need the port 162 for sending traps.

  original title: port162

  Hi, on port 162 there is a process called java.exe running. I tried to kill him with the command prodess k 1289. 1298 here is the process ID. but it comes back again. I need the port 162 for sending traps. I first removed java completely from my pc, but still there was this java.exe. in fact, there are two java.exe if I check in the running task manager. need help. I also ran antivirus as well as anti-malware software, but no difference.

  Hello

  I suggest you to visit these links and check if it helps:
  http://www.Java.com/en/download/uninstall.jsp
  http://Java.com/en/download/help/regkey_addremove.XML

  Have you tried to change the port to Java? See this link:

  http://www.Java.com/en/download/help/proxy_setup.XML

  It will be useful.

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• I need to know the process to implement encryption for Windows 8, on a HP Pavilion

  Original title:

  Encryption

  There is a choice in my control panel to set up encryption, but I have to go through the TPM module to be able to put in place, and my PC is not safe and has never been, I need to know the process to implement encryption for Windows 8, on a HP Pavilion

  Hello

  Protect your files with the encryption device
  http://Windows.Microsoft.com/en-us/Windows-8/using-device-encryption

  Protect your files using BitLocker Drive encryption
  http://Windows.Microsoft.com/en-us/Windows/protect-files-BitLocker-Drive-Encryption#1TC=Windows-8

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• January 12, 2015, I bought and downloaded online, Adobe Acrobat XI Standard. I just had my computer re [broadcast, losing everything in the process. I need re - download Acrobat. How can I do this now?

  January 12, 2015, I bought and downloaded online, Adobe Acrobat XI Standard. I just had my computer repaired, losing everything during the process. I need re - download Acrobat. I was informed, when I bought it, if need be, I'd be able to re - download acrobat if necessary.  How can I do this?

  You can download through the following page:

  Acrobat XI, X - http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• Hi, I would like to turn off my old laptop CS6 and reactivate it on my new. To reactivate it, what is the process? I need to download the product as the first time? There is something to be careful? Thank you!

  Hi, I would like to turn off my old laptop CS6 and reactivate it on my new. To reactivate it, what is the process? I need to download the product as the first time? There is something to be careful? Thank you!

  Hi petrosk47967892,

  To reactivate this product on a new machine, you can simply download & install the software product on the new computer using the link below and enter the serial number when prompted. Make sure you turn off the product from your old machine by running one of the products, select help > deactivate/signout.

  Download CS6: download produced CS6

  See you soon,.

  Michael Sharma

• Need to make the process to run only every time form is opened.

  I need my SQL queries to run each time the form is opened.  This is if the form is opened to the original user, an approver in the workspace, or when someone opens a (possibly rejected) form via an attachment in an e-mail message.  It seems that "Render" processes only seem to run when the form is opened by the end-user.  Can anyone help explain how to get the form to execute the process of rendering (and other methods) whenever the form is opened, no matter how, it is open?

  Thanks in advance.

  Doggie Joseph.

  For those who arrive here from a Google search, I think that to do a WSDL for the process.  It's a complicated subject, however.

  Someone at - it any other ideas?

• found the process 128331588:3150993912.exe need help / identification

  I found the process 128331588:3150993912.exe on my computer, what is it and is it dangerous?

  Hello

   
  Do you have any other antivirus installed on the computer software?
   
  Temporarily disable the antivirus software in the computer, and then run the microsoft safety scanner.
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Enable the antivirus software after you perform this step, because it would protect your computer from the computer.
   
  Hope that helps.
   

• Download failed, he must return and do it again.  Any way to communicate with a real person to initiate the return process?

  Items downloaded directly from Adobe, 14 receipts Message from real verification failure of adobe software, which means apparently Adobe thinks it's a pirated copy.  I uninstalled all the products for a return and now cannot cross these screens of circular window to continue the process.  A little guidance would be much appreciated here.  No, I'm not set up for the cat and I am just trying to be a member of base level, while I get my feet wet and understand this product.  An upgrade to premium may follow later.  This seems to be the only option left contact.

  Hi larry, my apologies for the inconvenience caused. The failure you are facing may be due to corrupted download. Please try the download and install again, ensure that the antivirus is disabled. Download https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.htmllink. Please let us know your progress.

• Need help in the PROCESS configuration (Maually in init.ora)

  Hello
  
  I want to install datbase schema using the remote control, but it throws me a message
  "UCR-6083: impossible - check requirement prerequisites for the selected item: WEBCENTER.
  Refer to the journal of the RCUS to C:\OracleRCU\ofm_rcu_win32_11.1.1.2.1_disk1_1of1\rcuHome\rcu\log\logdir.2013-01-22_16-03\rcu.log for more details.
  RCU - 6107:DB prerequisites for Init Param failed: PROCESS
  Current value is 150. It must be greater than or equal to 300. »
  
  I tried to change the process using SQL > change processes control system = 300 scope = spfile;
  and got the msg this modified system
  
  but still persisit error. I referred to a link
  UCR-6107, UCR-6092 for the same here it is mentioned in a post that some user has manually changed it a file init.ora ion... kindly helps change manually or through cmd...
  
  Reghards
  
  Beat
  
  Published by: Vivekk.Arora on January 22, 2013 02:58

  You must restart the instances after you change the setting.

• Stopping the process background Media Recovery, need to resolve the issue

  Hello
  
  Nice day!
  
  O/S: HP - UX 11.31
  DB: 10.2.0.5
  
  primary database: 2xnode RAC/ASM
  database Watch: Single Instance / Unix file system
  
  Problem
  ======
  due to not having enough file system free space on the database pending node the name extension (primary database insider) Undo tablespace data file failed on the eve of the database and stop MRP.
  
  primary 2xnode RAC/ASM works well, as there is sufficient free space available in ASM - DG, but on the eve of the database MRP could not operate as cancel datafile could not be postponed because of not enough free space on the file system.
  
  
  Alert - content:
  
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  Some of the files recovered data maybe left media fuzzy
  Media recovery can continue but open resetlogs may fail
  Sun Aug 07 11:27:58 PST 2011
  Errors in the /xxxx/bsspindb_mrp0_11342.trc file:
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  Sun Aug 07 11:27:58 PST 2011
  MRP0: Stopping the process background Media Recovery (bsspindb)
  
  
  contents of the trace file:
  =============
  
  2011-08-07 11:27:32.542
  2011-08-07 11:27:32.542 64896 kcrr.c
  
  MRP0: Background Media Recovery terminated with error 1237
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  -Redo read statistics for thread - 2
  Read rate (SYNC): 2651607 KB in 18054.67 s = > 0.14 Mb / s
  Physical reads total: 2651607Kb
  Longer: 14 Ko moves: 0/9426662 (0%)
  Change the movements: 1382412/14790845 (9%), moved: 503 MB
  More long LWN: 1081 KB, moves: 204/935910 (0%), moved: 5 MB
  Redo last scn: 0x0807.6e5e2a25 (8828009458213)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 2
  -Redo read statistics for thread - 1
  Read rate (SYNC): 2696445 KB in 18836.08 s = > 0.14 Mb / s
  Physical reads total: 2696445Kb
  Longer: 64 k, moves: 0/7997789 (0%)
  Change the movements: 1622690/11754876 (13%), moved: 701Mb
  More long LWN: 1974 KB moves: 237/591888 (0%), moved: 22 MB
  Redo last scn: 0x0807.6e5e2a03 (8828009458179)
  ----------------------------------------------
  2011-08-07 11:27:32.557
  Fall of Media Recovery redo thread 1
  2011-08-07 11:27:58.586
  The recovery is currently fatal!
  2011-08-07 11:27:58.586 1170 krsm.c
  Managed recovery: no Active posted.
  ORA-01237: impossible to extend datafile 7
  ORA-01110: data file 7: ' / oracle/folder/undotbs2_01.dbf'
  ORA-19502: write error on file ' / oracle/folder/undotbs2_01.dbf ', blockno 102713 (blocksize = 8192)
  ORA-27072: IO file error
  HP-UX-ia64 Error: 11: Resource temporarily unavailable
  Additional information: 4
  Additional information: 102713
  Additional information: 456704
  2011-08-07 11:27:58.590 64896 kcrr.c
  MRP0: Stopping the process background Media Recovery
  2011-08-07 11:27:58.590 1170 krsm.c
  ++++++++++++++++++++++++++++++++++
  
  
  No idea how fix the problem and restart the MRP process.
  
  Thank you...
  
  Kind regards
  X

  Hello

  You must add the disk to the /oracle file system. It seems that there is not enough space to extend the data file.
  After the addition of disc, you can restart the recovery with:
  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

  or

  You can move your data undotbs2_01.dbf file to another file system that has enough space, that
  ALTER system set standby_file_management = manual scope = mΘmoire;
  change the database file rename ' / oracle/folder/undotbs2_01.dbf' to ' / new_fs/undotbs2_01.dbf ';
  ALTER system set standby_file_management = auto scope is mΘmoire;.

  then start the recovery.

  concerning

• A correlation must be established at the level of the process calling or called?

  In the Oracle BPM Suite 11 g: advanced topics of BPMN book, the authors wrote:

  When you use the message-based correlation, don't the called process must be aware of the correlation, the appeal process. The runtime will take care of the details for the calling process, you don't need to include details of correlation in the process model for the calling process.

  In the called process, you must include the definition of correlation set and specify the tasks or events appropriate to use correlation. Let's look at an example in the following diagram:

  In the example above, the authors introduce a correlation on the called process.

  

  However, documentation of Oracle on the correlation, the typical design for correlation flow mentions that the correlation is initiated by the sender of the message, as shown below.

  1 design processes that communicate with each other.

  2. in the calling process, add the stream object that sends a message to the other process.

  3. define a correlation to the stream object that sends the message and configure it to initiate the property aliases.

  4. in the called procedure, add the stream object that receives the message.

  5. configure the stream object that receives the message using the correlation you defined and assign a value to the property alias.

  I also found this article - work with Custom correlation in Oracle BPM Suite 11 g, in which the author gave 2 examples of correlation in a taxi booking process. In these two examples, the author has also launched the correlation on the sender of the message.

  In the same section in the book, the authors also wrote:

  You need not set properties of correlation on the outputs of the process, for example, his task to send, or any nodes (message) or throw the message events. Only the entries have correlation properties.

  I would be very grateful if you could help me with the following questions:

  1. When is the right time to launch a correlation of the receiver / called process side?
  2. How the calling process can decide that the answer message he receives come from what conversation if the calling process is not the man who hired the conversation?
  3. Regarding the last quote, is there something wrong if I define a correlation on the output to send to a specific process instance?

  After spending some time more twisting my brain, I think I got a better understanding of the correlation now. Please correct me if I am mistaken on all parties. It is important to me.

  Where and when to define the correlation depends on 2 rules:

  1. Who needs conversation?
  2. Who is 1st to 'talk' in the conversation?

  There are a few scenarios that can occur:

  1. Only the called process needs a conversation.
  • This scenario has been well illustrated by Arun Pareek in his blog - working with Custom correlation in Oracle BPM Suite 11 g, in which he created a process for the taxi booking. As shown in the image below, there is a subprocess embedded to cancel a reservation. In this case, when another part of the system (process BPEL, BPMN process, etc.) sends a message "Cancel booking" in this process of 'CabBooking', he cares not the conversation. It is the process of 'CabBooking' who needs conversation in order to correct one of its instances running unreserve. The system of 'other', it's just a normal service with the ID of the booking must be cancelled.
    • 
  • Commercially, this kind of procedure should be the case for most popular use for correlation. Technical side, this is where Mark Nelson is correct. As only the called process needs the convesation, the calling process has no need to be aware of the correlation. According to rule 2, it is clear that the activity of "Booking request" is the place to initiate the correlation, as has been done by Arun Pareek in his blog. Subsequently, the "cancel booking" activity can make use of this initiated correlation.
• Only the calling process must a conversation.
  • This scenario was presented by Mark Nelson in his book - Oracle BPM Suite 11 g BPMN topics advanced, in which he had 2 processes: process a to calculate a square of a number and process B to submit the number of input in the process a as shown below. In this example, the correlation was launched on the 'send task' B and used by the task "receive" B processes processes. In the process, he doesn't care the conversation; his only responsibility is to calculate the square of the number of input. It's the process B who needs conversation in order to map the correct response to the Service call message.
• A.
• B.
• Technically, the motivation for this scenario is usually the case in which the called process is a reusable service that does not support WS-addressing. Generally, within the Oracle stack, as WS-addressing is supported, simply use the default conversation without having to manually create correlations. On the business end, one of the reasons for having such a correlation are to ensure that there is only one instance of execution with a special at any time correlation key. For example, for procedure B, it is not possible to have 2 instances with the same number of entries as the correlation key. After the 2nd rule, it is easy to know where to start the correlation - the activity of the 'task to send' process B.
• The appeals process and need a conversation.
  • This scenario is also confirmed in blog Arun Pareek. In the 'Get booking availability' embedded sub-process, he throwed a 'send booking confirmation' signal and then took in the primary process to the activity of «Get answer of Confirmation booking»
. In fact there are 2 ways to implement correlation in this case.
• 
  • Assuming that no correlation has been created in the process of "Taxi booking" (ignore the use case for "Cancel booking" above), sequel to the 2nd rule, as the "send Booking Confirmation" is the activity 1 to join the conversation, this is the place to initiate the correlation, as has been done by Arun Pareek. Subsequently, the 'Booking Confirmation Response Get' will make using the correlation of insiders.
  • We can push this scenario 1 scenario - "only the called process needs a conversation", by launching the correlation directly on the first activity, "Booking request", "cabin booking" in the process of. Using this approach, the 'availability reservation get' subprocess embedded as well as any other external processes that need to communicate with the 'Cabin booking' process will not be aware of the conversation. In this case, all the 'other' process is enough to call a favor. Correlation initiated on the 'Cabin booking' process will take care of the rest.
  • The 2nd approach should be the best practice, because it helps ensure that the correlation is initiated in only 1 place - the 1st activity of the process called and reused by anyone.
• Subprocess multi-instance incorporated.
  • This scenario was presented by Mark Nelson will use a process C, which is a sub-process multi-instance incorporated, to call multiple service to the process above. In this example, the correlation was launched on the 'task to send' C process and used in the 'task to receive' C processes. Once A process has no need to be aware of the conversation. In addition, a conversation of scope must be defined inside the embedded sub-process.
    • 
  • The reason why the correlation must be initiated the calling process is because only one instance of the calling process is several service call to the same process in parallel at the same time. On arrival, the calling process response messages must know what answer message is requiring the Service. Again, within the Oracle stack, as WS-addressing is supported, it is sufficient to use brought the conversation without having to manually define correlations.

This is how I understand the correlation at this stage. Please let me know if I misunderstood something.

Thanks a lot for your help!

• Question about the listener and the process server in dedicated server mode

  Hello
  
  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.
  
  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.
  
  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?
  
  Clarification on how this case is handled are very much appreciated, thank you,
  
  John.

  440BX - 11 GR 2 wrote:
  Hello

  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.

  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.

  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?

  John,

  I guess that you have asked the same thing in a different form in another thread. In the case, when the process of the user and the server is to be on the same side, the communication done by using the Protocol bequeth and the user, since it is not not going to use a (@) sign, he would use a default service for connected sys$ users .

  HTH
  Aman...

• The process APPNOS and APPTS are devouring my RAM and make my computer very slow.

  Hello, I have an iMac (late 2012) 2.7 Ghz intel core i5 with 8 GB of RAM. Lately, my computer has been extremely slow and almost unusable for the last 4 days. After repeatedly to close the market and stop, I finally could open the activity monitor after about 25 minutes of loading. I was shocked to see that the process APPNOS and APPTS consumed 13 GB of RAM each, with a total of 27 GB of RAM used even if my computer has only 8 GB of RAM. I left the two processes of strength and my computer still worked once, normal, but these processes continue to pour every time my computer sleeps. I hope that someone knows what these processes are and how they arise or eat more RAM that I stop.

  For what it's worth, update macOS Sierra from El Capitan did nothing.

  Thank you

  NMitchem

  You have inadvertently installed adware. You don't need to download or install anything to fix.

  Navigate to the following folder and display its content in a screenshot.

  ~/Library/LaunchAgents

  To open this folder, copy the above line and Paste in the menu to go to the Finder > go to folder... field. It should look like this:

  

  Take a screenshot showing the contents of the folder and post in a reply. To take a screenshot read annex of the following user Tip: write an effective communities of Apple support question.

  There will be additional instructions to follow.

  For a description of how this can happen, how to avoid it in the future, and to the actions recommended Apple read How to install adware.

  Check your settings for call control: OS X: all-Gatekeeper - Apple Support. Gatekeeper is designed to prevent you from installing software of garbage inadvertently.

• Firefox asked me to upgrade my sound system &amp; in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. Prva Nice

  Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. I expected more of Firefox as a privacy feature!

  Sorry to hear about this, you should always beware of the pop-ups - never open or install anything, unless it is on the official website. Firefox has built-in features (and extensions that you need to find and install) to protect your privacy and security, but all users must still be careful with their browsing habits. You can report malicious links to the FBI Internet Crime Complaint Center here: http://www.ic3.gov/complaint/default.aspx

  You can also report false web documents by clicking on:

  • Help > report false Web, or
  • 

    >

    

    > Report false Web

  Regarding your malware, please follow this guide:

  • http://malwaretips.com/blogs/zombie-alert-virus/

  After removing your malware, consider extensions such as Adblock Plus.