Initio default controller blocks external Hard Drive Access, a fix?

Similar Questions

• Toshiba StorE Alu 2 s 1 TB 2.5 USB3.0 SATA controller card "external HARD drive

  "The controller card of my" Toshiba StorE Alu 2 s 1 TB USB 3.0 2.5 "Portable external hard drive" malfunctioned. I replaced I replaced it with Western Digit controller card but my data are not displayed using this USB-SATA controller.
  So I think I have the same needs as my original. So how and where can I buy this card controller controller at Toshiba and my data appears as been replaced by the same?
  Kindly reply me as soon as possible.

  It is always difficult to find these parts. In my opinion, you should contact the nearest Toshiba service provider and ask for help.
  They should be able to get such parts.

• update my laptop stop recognizing the driver of Bus controller universal external hard drive.

  Recently my laptop stop recognizing the external hard drive. It was working fine before. The MFG. external IOMEGA Hardrive said universal Bus controller driver to be upgraded. It is Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller pipe - 24CD. My several attempts to install an automatic update of the driver from the Intel Web site has failed.  What to do next?

  Hello

  1. which is the version of the service pack installed on the computer?

  2 have you made any changes to the computer before the show?

  3. What is the exact error message?

   
   
  I suggest you perform the steps described in the document:
   
   
  How to get and install the USB 2.0 drivers in Windows XP Service Pack 1
  http://support.Microsoft.com/kb/329632
   
   
   
  I hope this helps.

• computer does not recognize my external hard drive, how to fix

  my computer does not recognize my external hard drive and need to know how to fix it. I need to access files on the hard drive. AS SOON AS POSSIBLE

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Step 1:

  Go to Device Manager and check if the hard drive is it recognized.

  Step 2:
  Go check and management disk if the hard drive is recognized, if so, then try changing the drive letter and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check out this link:
  http://support.Microsoft.com/kb/948911

  It will be useful.

• I enable sharing of external hard drive and it works. So when I got the pc power down is no longer share external hard drive. I have to reactivate every time sharing and reset the library wmp it becomes very old.

  Share an external hard drive for xbox. When computer I disable and re-enable sharing settings restore default to the external hard drive. When I re-enable sharing he does not always up to this I have reset the wmp library. I ran the fix nothing works computer center.

  Thank you guys for help. I actually already fixed it. I used to turn on sharing for just the hard drive and not the subfolders. I enabled sharing on the hard disk files and sub using the same exact settings and it seems that its fixed...

• Windows 7 Professional... How to get access to security to view my external hard drives and external flash dirves

  I am a first time user to windows 7 Professional and need to learn how to access files that are connected to the computer by an external flash drive or an external hard drive.

  External or external flash drives hard drives can be connected to windows 8 computers or windows xp to view the files, but when then identical external or external flash drives hard drives are connected to two computers with windows 7 Professional there are settings automatically don ot all access to the external hard drive or flash drive external files.

  When the computer display, it displays the external hard drive.

  When I left click top produces a pop up with the title bar: location is not available

  Content: H: | is not accessible.

  Access is denied.

  When I right click on the hard drive and then click the Security tab, it displays:

  Name of the object: H: |

  To continue, you must be an administrative user with permission to view this object's security properties.

  Do you want to continue?

  Then I clicked on continue and it displays:

  Owner

  You do not have permission to view this object's security properties.  To view its security properties, you can try to take possession of the object.  As owner, you can also control who gets the permissions on the object.  Please note that once you take possession, the previous owner may not have access to the object.

  To try to take possession of the object, select an account from the list, and then click OK.

  Name of the object: H: |

  Current owner: unable to display current owner.

  Change in ownership to:

  the two choices are my name or administrators

  I then chose an and apply and ok and it did not work.

  I then chose the other and apply and ok and it did not work.

  Then I clicked on other users or groups and entered everyone and that no longer works.

  I am the only user of this computer brand new.

  When I click on accounts Panel then user control and security for the family and then user accounts, it displays my name as administrator password.

  What are the steps that I can buy an external hard drive or buy a flash drive or use the ones I already have and use them with this computer which has windows 7 Professional?

  How is the switch of the property did not work?

  I went back to safety again and this time stayed at the bottom for special permissions or advanced settings.

  And yet when I kept getting location is not available

  H:\ is not accessible.

  Access is denied.

  How do change you windows 7 Professional so that you can have access to your own files on an external hard drive or an external flash drive.

  Please list the steps.

  Thank you

  This problem has been resolved in collaboration with support of higher HP for Z book 17 mobile workstation.

  Steps:

  (1) determines that it is not NTFS problem

  (2) using the MSCONFIG the problem has been isolated to a single service

  When this service has been disabled and after reboot, the problem of access to the files is resolved.

  Results: HP had installed software on the HP Z book 17 laptop or mobile workstation which, by default, block communication with external hard drives and flash drives external.

  This HP Client Security software replaces or blocks all right click changes settings become apparent.  It blocks the change of ownership.  It blocks the administrator privileges.  It blocks all is used.

  The HP Client Security software has been changed and changed to deny privileges (default setting) to allow the communication with external drives.  When you go into the setting for this software, it is now a humming noise and maybe I need to download the drivers and software again to see if this problem is also corrected.

  Thanks for your comments.  I spent a lot of time on this and didn't understand why all right-click methods had failed.  The default software setting HP deny had trumped right click all changes.

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• No access to an external hard drive

  So I plugged my external hard drive in my macbook to move some files on it but it says "the disk you inserted is not readable by this computer." I clicked on initialize and he said: the hard drive is uninitalised and Mont and partition are grayed out. I ran the option of first aid, but he only said: the operation completed successfully. I am aware of that my external hard drive works because it is blue is lit and I used it a few days ago and it worked fine. I also plugged into another usb key I have and it works perfectly.

  Is there anyway for me to access my files on the external hard drive? I really don't want to lose my photos and files!

  The external hard drive is a tough drive 320 freecom.

  the light means power can get to the case, not the drive past any integrity checking. If the drive is older it may break or it could have been failure, or requires 3rd party software to allow full access, if it is NTFS formatted for windows and you use it on a mac.

  If you do not backup your data may be missing. If you start the boot disk process, you have already started to remove the files and more you try using that drive less whatever it is (if any) can be recovered.

  Freecom offers guarantees of 3 years on their mechanical hard drives but offers no guarantee with recovery of lost data (no company only)

  http://www.Freecom.com/warranty

  If your player is longer than 3 years its not rare that its failure and should be replaced with a new unit.

  In the meantime, you can try a 3rd party solution such as Disk Warrior or rescue for Mac to see if something can be saved, but still no service company forensic or data will always claim that they can do it with any degree of certainty to recover your data.

• To access the other account via external hard drive

  MacBook Pro (13 inch, early 2011)

  V.10.11.6 El Capitan (15G 31)

  To summarize what I've lived, I got a kernel panic, by connecting to any account. So I tried to fix it by zapping the PRAM and NVRAM, tried the reset SMC, and both did not work. So I installed El Capitan on my external hard drive and it works, I just need to access the other account on the Mac to recover photos and then do a clean set install.

  The problem is that I do not know how to access the other account on the mac like I did not move any info from another acc to my external hard drive. Is it possible to do more than to reconfigure my HD post and return to the new installation procedure? Or I'm able to get pictures on the other account with the photo software?

  Open the drive containing, then the folder users, your record of departure, and photos. If you encounter a file that you don't have access permission, either drag it to the office supply your administrator password, or select the entire disk, choose get the information in the file menu and set to ignore permissions or ownership.

  (143739)

• external hard drive, refusal of access permissions...

  I recently bought an external drive (G-Drive) to my back side ups.

  Now, I get an error message (occasionally) stating that I have no permission for its content and I can't eject the hard drive in my desktop computer.

  And when I go to copy the content to the hard drive, it just shows that he is about to be copied without transferring all content...

  I open the "Get Info" tab and there my user account to the content of the hard drive read/write.

  I should have access to the hard drive to do the above actions, but somehow it is not allowing me.

  I have another external hard drive and it ended all it activities.

  I am running Yosemite 10.10.5

  I'm offended on this one here... ~ has ~.

  Select the drive

  type

  CMD + i

  unlock and select "ignore permissions on this drive.

  

• How to access the external hard drive iPhoto library

  Hello

  I'm trying to access my iPhoto library that is on my external hard drive.  I try to free up space on my MacBook and want to make sure that I can still pick up stuff if I want to from the outside. I get this message (photo).   OK let me download a photojeeeeeezzzz... You have made changes etc, a newer version of iPhoto... .do you want to leave a use of the latest version, or creat new version etc,... I want to just access my library of tha hard drive...   All ideas

  Heres the phot o

• Hello. I created a folder music on my external hard drive connected to my asus router.  I can now access the music through my media library.  How can I change the folder when I make new purchases to iTunes easily without doing it one by one

  I created a folder music on an external hard drive connected to my asus router.  I copied my music from my iTunes library in this folder access and can now my kodi media network.  How I updated the folder when I do new iTunes purchase without having to do it one by one thanks

  You can use a backup tool that updates only modified files.  You don't say what kind of computer you use.

  ITunes is actively using media on the external hard drive so you can replace it. Simply copy the media to one other player does not have iTunes it use it.  iTunes is probably still using media to your internal drive.

• Cannot access 250 GB Toshiba USB external hard drive

  Hello

  I'm unable to access my 250 GB USB hard drive. It gives an error that it detects hardware & gives a pop for Cypress AT2LP RC58 driver & research updates on internet & then error is "cannot install the hardware, the hardware was not installed because the wizard did not find the necessary software."

  Any help will be much appreciated.
  Please let me know for any info.
  Thank you very much!!!
  Concerning
  Harish S

  Hello

  Seems that the external HARD disk drive cannot be recognized because of the driver problem.
  What you could do to disconnect the USB of ALL devices and open Device Manager.
  Then choose the display command, show hidden devices and uninstall all devices under USB controllers. Reboot the laptop.
  After restarting again the operating system must install USB drivers again and you could test whether the external HARD drive can be connected as well.

  I have goggled a bit and found a few interesting statement abut Cypress AT2LP RC58. It seems that the HARD drive is ok but sometimes the HARD drive cover and the interface connector would be malfunctions and so this problem would happen.

  But these are only suggestions if you want to try for Cypress AT2LP RC58 goggle and see for yourself.

  Best regards

• Cannot access my backup time machine on external hard drive once I changed my hard drive

  Since I changed my hard drive on my mac pro book I can't access the time machine back up on my external hard drive. All the shows when I connect the hard drive, but I can't access it.  Any ideas?

  I use El Captain MacBook Pro (15-inch mid-2012),

  By changing the hard drive, you have also lost all preferences, including those for Time Machine. You can have success by cloning back from the old system to the new drive to get back them.

  Or, simply erase the backup drive, reconfigure Time Machine preferences, then let time Machine do a new backup.

• Access my external hard drive to Windows on my new Mac

  Hello world

  I am a new user of Mac Yosemite, recently moved from Windows and I am a passionate photographer

  All my photos are saved on two external hard drives of laptop computer Windows

  Is it possible to access outside data by car and it is hard on the Mac

  I keep reading things on the partition and FAT32 or the disc running utilities to reformat, but I'll lose all the images on the external hard drive

  I feel like I'm missing something here

  [What should I do to be able to view my images on Mac, I will then load in Lightroom for editing [the forest of Lightroom] that I'm very good]

  Thank you... Venus

  Simply connect the player and open the files. Unless you need to write to the disk, you don't need to do anything else.

  (138184)