Insert a line in a form to separate 2 groups of fields...

Similar Questions

• How to post several lines in oracle FORM

  Hello

  I created a custom form that has a header block and a block of retail. the retail block can have multiple lines. I have a requirement that lines (multi-line) block detail data will be validated during the recording of the record. Please indicate how we can do?

  Please note that the data are not saved and yet, it will be validated during registration or any click of a button.

  Please notify. It is urgent.

  Thank you

  Pirre

  Make the echo of Christian question... What do you mean by "validating"?  You have not yet defined what it means in your scenario!

  Is your retail block a block of the base table, or a control block?  Rather than the trigger key - Commit, you could use the triggers we insert or we--update since these will be triggered for each line that oracle Forms will insert or update.  If you want to keep your validation in the trigger key code - Commit, you will need to loop through all the rows in your detail block and validate each line manually.  If the validation logic is the same for inserts and updates - you can put this logic in a unit of program (procedure) and then call this procedure in the Insert and update triggers on.

  What about using the trigger when-validate-Record?  This trigger fires as you navigate from one line to the other, but it will save a loop block (if you continue to use the "enter" key).

  Craig...

• Is it possible to have a button that will insert a line of table rather than add at the end?

  I have a button Add line that works correctly using addinstance, but I would like to have the line button Add at the end of each line, if a user can insert a line in the middle of the existing/fiilled of lines.  Is this possible?  I would like to be able to do this using Formcalc because that's what my script in the form currently complies.

  Hello

  Yes, it is possible, but actually doing just that the script is to add a new line at the end of the table AND then move the line to the appropriate position.

  See examples here: http://assure.ly/gk8Q7a. Table 5 is a Table object, while table 6 is constructed using subforms. In both cases, the Index number is a button, which adds a line below the existing one clicked.

  See who helps me to,.

  Niall

• Insert several lines with dynamic data

  Hello
  When I do an insert into a table that has several lines of dynamic information. on
  a page, it inserts all rows that are dynamically filled. I want only what he
  to insert the lines that I choose the initials on. How can I do? Let's say I
  have 5 items that are displayed on a page and I want to insert only original
  the first 2 because the last 3 are left blank, how should I do this? I tried
  implementation of an if statement that says:
  
  < cfif "form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
  
  Then make the insertion in the table
  
  < cfelse >
  < / cfif >
  
  I have this game were also up in a loop that says:
  
  < cfloop index = "help" list = "" #form.listofids # "delimiters =",">"
  
  Here is the code for just the insertion. I also have a code here
  Update another table. I got this to work, so I just try to get the insertion
  works fine for the moment. I can not use this where the query statement:
  Where ItemID = #id # because I'm trying to insert into the table of approval, not
  the items table. The table is just updated with some other info. in
  a few other input boxes.
  
  < cfloop index = "help" list = "" #form.listofids # "delimiters =",">"
  < cfif "form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
  
  < cfquery Datasource = '#application. DataSource #">"
  Insert into accreditation (APV_ItemID,
  APV_ECID,
  Document_Type,
  Approval_Initials)
  
  Values (' #Evaluate ("form.) (' ItemID # help # ") #',
  ' #Evaluate ("form. ("ECID # help #") #',
  < cfif isDefined (form '. ') ("Help of # PNR_Doc_Type # ') and
  "form. "Help of # PNR_Doc_Type #" NEQ "" > "".
  ' #Evaluate ("form. ("Help of # PNR_Doc_Type # ') #',
  < cfelse >
  NULL,
  < / cfif >
  
  < cfif isDefined (form '. ') ("Help of # PNR_Approval_Initials # ') and
  "form. "Help of # PNR_Approval_Initials #" NEQ "" > "".
  ' #Evaluate ("form. (Aide de # PNR_Approval_Initials #») #
  < cfelse >
  Null value
  (< / cfif >)
  
  < / cfquery >
  
  < / cfif >
  < / cfloop >
  
  On the page display, just a table of dynamic info. Here are the 4
  things that I have on this page that needs to be inserted to the database.
  
  < input type = "hidden" name = "' ECID #ItemID #" value = "#ECID #" > "
  < input type = "hidden" name = "' ItemID #ItemID #" value = "#ItemID #" > "
  < input type = "hidden" name = "" PNR_Doc_Type #ItemID # ' value = "PNR Req" > "
  
  < td align = "center" >
  < cfif Approval_Initials is not "" > "".
  #Approval_Initials #.
  < cfelse >
  
  < select name = "PNR_Approval_Initials #ItemID #" >
  < option value = "" > select initials < / option >
  < cfloop query = "ShowInitials" >
  < Cfif Engineer_Initials EQ 1 >
  < option value = "#Initials #" > #Initials # < / option >
  < / cfif >
  < / cfloop >
  < / select >
  
  < / cfif >
  < table >
  
  Can someone help me please on just the insertion in the database so that it
  will insert on the lines that I chose the initials on and not others? Thank you.
  
  Andy

  You almost managed, but I see that you have commented.

  (" The help of # PNR_Approval_Initials # ') AND form ["PNR_Approval_Initials # help #" ""] NEQ "" >

  Do things here

• Empty line in the form online

  Hello planning guru,
  
  How is it possible to insert a blank line in the online form in the planning?
  
  Thank you very much
  whitebaer

  Hello

  There is nothing really out of the box to insert a line.
  It is possible to create an asymmetrical shape and use the separator option to break up of the dataform table.
  Otherwise it may be custom javascript but it would be very messy.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Database Connectivity Toolkit (insert multi line)

  Hi all. I recently got the toolkit of connectivity (DBCT) database on LabVIEW 2016 and I try to insert several rows in a database.

  Using a sine signal input I tried to insert 50 rows in an iteration, but each method I tried returned 50 values in a line. The end of the constant of the line and table using chain worksheet, returned what looked like 50 lines, but when I questioned "SELECT COUNT (*) FROM... "the number of rows equals the number of iterations.

  On another post on the forum, someone suggested that it is not possible to insert several lines using the DBCT. Can anyone confirm this?

  I wrote a code that allows me to insert 3 rows in an iteration, under a single connection. However, this method is very time consuming and would not work for large amounts of data.

  

  Can anyone think of a better way to do it?

  Thanks in advance,

  Lisa

  Create your own query, and use the query execute VI.

  

• The implementation of the method of Frank Nimphius's to insert a line at the end of a table?

  Mr President.

  The implementation of the method of Frank Nimphius's to insert a line at the end of a table?

  https://blogs.Oracle.com/jdevotnharvest/entry/how_to_add_new_adf

  I put this method is my CustomerViewRowImpl class

  Like this

  public String onRowCreate() {
   BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
   //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
   //in this sample
   DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("allDepartmentsIterator");
   //access the underlying RowSetIterator
   RowSetIterator rsi = dciter.getRowSetIterator();
   //get handle to the last row
   Row lastRow = rsi.last();
   //obtain the index of the last row
   int lastRowIndex = rsi.getRangeIndexOf(lastRow);
   //create a new row
   Row newRow = rsi.createRow();
   //initialize the row
   newRow.setNewRowState(Row.STATUS_INITIALIZED);
   //add row to last index + 1 so it becomes last in the range set
   rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow); 
   //make row the current row so it is displayed correctly
   rsi.setCurrentRow(newRow);                          
   return null;
  }  
  

  My iterator name is CustomerView1Iterator

  What to write get the method at line 5 above

   DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("allDepartmentsIterator");
  

  Concerning

  Hello world

  I put my name to vo iterator CustomerView1Iterator instead of allDepartmentsIterator.

  And it works quite well

  Concerning

• Insert several lines in trigger?

  can someone tell me how can I insert several lines in a trigger. I tried several ways, and so far nothing works.

  create or replace

  USER_GROUPS_TRIG RELAXATION

  before INSERT ON USER_GROUPS

  FOR EACH LINE

  DECLARE

  number of max_id;

  BEGIN

  SELECT TO_NUMBER (new_id) + 1 as new_id in max_id OF NEW_ID_VW;

  INSERT THE TBL1

  (USER NAME)  VALUES

  (max_id,: NEW.) (NEW); -It works very well and needs no adjustment, 1 inserted row.

  MERGE INTO GROUP_MAPPING HAS

  USING (SELECT USER_ID, GROUP_ID ADMIN_GROUPS_VW) B

  ON (A.USER_ID = B.USER_ID)

  WHEN NOT MATCHED THEN

  INSERT (A.USER_ID, A.GROUP_ID)

  values (b.user_id, b.group_id);

  -FOR V IN 1.10 IN LOOP

  -INSERTION IN GROUP_MAPPING (user_id, group_id)

  -(select user_id, group_id from admin_groups_vw);

  -END LOOP;

  -INSERT IN GROUP_MAPPING

  --(USER_ID, GROUP_ID) VALUES

  -(max_id, (select group_id from admin_groups_vw));

  -None of these POPs an error, just does not have the insert (there are several records, so there should be several inserted rows), I tried to insert, loop and fusion.

  END;

  Thanks for any help.

  Hello

  Whenever you have a problem, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) of all the tables involved, so that people who want to help you can recreate the problem and test their ideas.

  Also post the exact results you want from this data, as well as an explanation of how you get these results from these data, with specific examples.

  If you ask on a DML statement, such as CREATE TABLE, INSERT, INSERT statements must re-create the tables as they are to the DML, and the results will be the content of the or a modified tables when it's all over.

  In this case, after complete relaxation and a DML statement that triggers, too.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  Is admin_groups_vw a notice?  This it is, and the view depends on the table you are inserting (user_groups), then you will get a runtime error because the picture is changing.  A FOR EACH ROW trigger on user_groups can't question user_groups.  You said: "none of these POPs an error", but are you sure you're not getting a runtime error and just hide?

• I created a form to complete 4 page. I would like to place a button at the bottom of page 4 when you click inserts another copy of the form in the existing file. I have the user to have the ability to easily create muliple copies of the same 4 pages in

  I created a form to complete 4 page in Acrobat. I would like to place a button at the bottom of page 4 when you click inserts another copy of the form in the existing file. I want the user to have the ability to easily create multiple copies of the same 4 pages in a single file. It is possible with Acrobat? I use a PC.

  It is possible using models and JavaScript, but if it is to work with the player, users will need to use the desktop version (Windows/Mac) of 11 Reader or CD player. Here is a link to an older article which explains the basics: Planet PDF - a lesson in the templates for Adobe Acrobat

  Note that this is a bit outdated, but it should help you get started. If you have any other questions, post them in the Acrobat JavaScript here forum: JavaScript

• Insert multiple line values if it does not exist!

  Hi all

  I have a question,

  If I have a table that contains 2 columns (ID, status) and the current info that is exists in this table is:

  1. open

  2 closed

  3. open

  If for example, a user inserts a line with an ID, say 6, how do I create a trigger that inserts the missing ID, i.e. 4, 5 with a status NONE if that ID are not existed in the ID column. Ensure that the inserted rows

  4. NO

  5. NO

  Any idea!

  Thank you in advance!

  Kind regards

  It works as you want

  I created system.denemet table

  CREATE THE SYSTEM TABLE. DENEMET

  (

  ALAN1 NUMBER (2),

  ALAN2 VARCHAR2 (10 BYTE)

  )

  INSERT the lines below

  1, CODE1

  2.CODE2

  3, CODE 3

  and I created the trigger

  CREATE or REPLACE TRIGGER SYSTEM.t_DENEMET

  BEFORE INSERTING

  ON THE SYSTEM. DENEMET

  REFERRING AGAIN AS NINE OLD AND OLD

  FOR EACH LINE

  DECLARE

  var_TEMP NUMBER;

  var_SUM_ID NUMBER;

  BEGIN

  -Here you can check whether a gap exists or not in the ID column for example,.

  -do not forget the math formula (n (n + 1)) / 2

  SELECT SUM (ALAN1) IN the var_SUM_ID OF THE SYSTEM. DENEMET;

  IF var_SUM_ID = ((:NEW.)) ALAN1-1) *(:NEW.) (ALAN1 - 2)) / 2 then

  null; countinue - there are not any gaps

  on the other

  -Loop

  FOR I IN REVERSE 1. : new. ALAN1-1 LOOP

  Begin

  SELECT 1 INTO var_TEMP OF THE SYSTEM. DENEMET WHERE ALAN1 = i;

  EXCEPTION

  WHEN no_data_found then

  INSERT INTO THE SYSTEM. DENEMET VALUES (i, 'NONE');

  end;

  end loop;

  end if;

  END;

  and insert

  6, A CODE6

  Select * from system.denemet

  1, CODE1

  2, CODE2

  3, CODE 3,

  4, NO

  5, NO

  6, A CODE6

  That's

  and also you have to develop it in terms of performance, for example, you can add a control to stop searching in the loop

  Concerning

• can I add horizontal lines on muse? to separate the text

  One can tell me how to add horizontal lines

  Try here:

  How to insert a line dotted with Muse?

• I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  I need to create a curved with type text box that heal and return to the next line in the form of curved text. How do I do that?

  1. Draw a set of concentric half circles also spaced, stacked so that the outermost is the most remote.
  2. Use the text tool to add text to the outermost path, thus creating a PathType object.
  3. Select all the paths. Type > threaded text > create.
  4. Text tool: click at the end of the text in the object of PathType. Continue typing.

  

  > If I do that it will not type more.

  A Warp effect is a direct effect. When it is applied to the type of objects, they are still editable text. The chain will deform, however, the text also, not only the paths to which it is attached. Sometimes you want that, sometimes you don't have.

  JET

• Adding empty lines to tabular form on page load

  Hello
  I use APEX 4.1.1 on 11gXE and Windows Vista.
  
  I created a tabular form on a page. When the page loads I want the::AddRow() to call x number of times where x is the value returned by a list of selection (from 1 to 10) on another page. If the value 3 is selected::AddRow() is called 3 times. This is similar to the example of Denes Kubicek, but I am interested in the use of a dynamic action instead. Here is the link to Dene
  
  http://Apex.Oracle.com/pls/OTN/f?p=31517:209
  
  I created a dynamic action that fires when the page loads and runs the following code:
  
  var i = 0, z = $v ('P1_NO_ITEMS');
  
  While (I < z)
  {
  ::AddRow();
  i ++ ;
  }
  
  When I put P1_NO_ITEMS 3 and go to the tabular presentation page, it loads but does not add 3 empty lines in the form. I tried hard coding a value into the javascript code and that works very well. for example
  
  var i = 0, z = 3;
  
  When I add an alert in the code the value of P1_NO_ITEMS seems to be undefined, and I get a white for its value. If I check the session state P1_NO_ITEMS has the value 3.
  
  Any ideas where I'm wrong? I have a feeling that it is something simple...
  Thank you very much
  Helen

  Hi Helen
  >
  I use APEX 4.1.1 on 11gXE and Windows Vista.

  I created a tabular form on a page. When the page loads I want the::AddRow() to call x number of times where x is the value returned by a list of selection (from 1 to 10) on another page. If the value 3 is selected::AddRow() is called 3 times. This is similar to the example of Denes Kubicek, but I am interested in the use of a dynamic action instead. Here is the link to Dene

  http://Apex.Oracle.com/pls/OTN/f?p=31517:209

  I created a dynamic action that fires when the page loads and runs the following code:

  var i = 0, z = $v ('P1_NO_ITEMS');
  >
  JavaScript works only on elements in the HTML DOM. Once you have navigated away Page 1 the P1_NO_ITEMS not available in JavaScript.
  >
  While (i<>
  {
  ::AddRow();
  i ++ ;
  }

  When I put P1_NO_ITEMS 3 and go to the tabular presentation page, it loads but does not add 3 empty lines in the form. I tried hard coding a value into the javascript code and that works very well. for example

  var i = 0, z = 3;

  When I add an alert in the code the value of P1_NO_ITEMS seems to be undefined, and I get a white for its value. If I check the session state P1_NO_ITEMS has the value 3.

  Any ideas where I'm wrong? I have a feeling that it is something simple... >

  Change

  z=$v('P1_NO_ITEMS');
  

  TO

  z='&P1_NO_ITEMS.';
  

  See you soon,.

• How to show all lines of tabular form on a single Page?

  Dear Apex Experts,
  
  Is there a feature in the tabular Presentation , or the workaround even to show all lines of tabular form on a single page?
  as in the interactive report where 'ALL' option when selected displays all lines.
  
  Thank you in advance for any help you provide
  
  Best regards

  create an item
  assign a number 1000000 or more and on the area of research reports a number of lines returned to the point and set with the name of the element

• insert this line does not exist

  Hi all
  
  I need to insert a line using the daily procedure. Insert must only be performed when this line does not exist in the table. Please suggest me a decision. I know it's simple question, sorry for disturbing (Burns my brain).

  Hello

  Use MERGE.
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_9016.htm#sthref9082
  If you use Oracle 10 (or higher) then you don't need a section "WHEN MATCHED.

  If you want to know, post a small example of data (CREATE TABLE and INSERT statements, showing all the tables involved, as they exist prior to the INSERTs in question). Put one or two unconditional instructions INSERT (including an example of each matching rows found and not found) and the results you want (that is, the content of the table changed after the INSERTs).
  Always tell what version of Oracle you are using.