insert into a final table based on a condition

Similar Questions

• Insert data into the same table based on certain conditions

  Hello. I'm new to this forum.
  I have to write a stored procedure to insert data in a table MYTABLE say, having a structure like:
  
  Col1 Col2 Col3... TotalInstallments CurrentInstallment PaidAmount MonthYear
  I have to insert all the data that it is in the same table (MYTABLE) except change some fields based on certain conditions:
  
  1. if PaidAmount > 0 & & CurrentInstallment < TotalInstallment then
  
  CurrentInstallment = CurrentInstallment + 1
  
  2. in the field MonthYear I have data ex. 01/2012, 11/2012 formate(month/year)...
  
  So, I have to insert data by incrementing the month and year. for example:
  
  If currentdata is 11/2012 next data will be 12/2012
  
  But following will be 01, 2013
  I have to select all records that belongs to the previous month (across the field MonthYear) and put the audit on each record selected and insert data and then turns them into table (MYTABLE) even.
  
  How to achieve that?
  
  Thank you.

  978184 wrote:
  Hello. I'm new to this forum.
  I have to write a stored procedure to insert data in a table MYTABLE say, having a structure like:

  Col1 Col2 Col3... TotalInstallments CurrentInstallment PaidAmount MonthYear
  I have to insert all the data that it is in the same table (MYTABLE) except change some fields based on certain conditions:

  1. if PaidAmount > 0 & CurrentInstallment

  CurrentInstallment = CurrentInstallment + 1

  2. in the field MonthYear I have data ex. 01/2012, 11/2012 formate(month/year)...

  So, I have to insert data by incrementing the month and year. for example:

  If currentdata is 11/2012 next data will be 12/2012

  But following will be 01, 2013
  I have to select all records that belongs to the previous month (across the field MonthYear) and put the audit & on each of the selected data record and insert then turns them into table (MYTABLE).

  You can do this way:

  This is not tested, but if you can provide the example of table structure and data (IN create table and insert scripts), it can be put to the test.

  insert into your_table
  (col1, col2, col3...current_installment, month_field)
  select col1, col2, col3..,
         current_installment +
         case when paidamount > 0 and current_installment < total_installment then
          row_number() over (
                              partition by column1, column2,.. columnn      -->You may choose partition if you want the
                                                                            --Increment of Current_installment to reset after particular combination ends
                              order by primary_key        -->Order the Increment, you may choose to add more columns to order by
                            )
        else
          0                                               --> if condition is not met, then Add 0
        end curr_installment,
        add_months(to_date(month_field, 'MM/YYYY'), 1) nxt_month
    from your_table;
  

• Inserting into a temporary table

  Hi all

  I use this code to insert into a temporary table

  INSERT INTO VISIT_TEST

  (NO, VISIT_ID)

  VALUES

  (1,: ALL_ADMITTED_PATIENT.) VISIT_ID);  -guess: ALL_ADMITTED_PATIENT. VISIT_ID is another number.

  COMMIT;

  It inserts nothing,

  but when I try to insert all the values of pl/sql with the same way

  INSERT INTO VISIT_TEST (NO., VISIT_ID) VALUES (2, 4);

  It inserts with success.

  the code for creating the table of tempo is

  CREATE A VISIT_TEST GLOBAL TEMPORARY TABLE (NO NUMBER, NUMBER VISIT_ID) COMMIT PRESERVE ROWS

  Why does not insert on it data?

  PS: the whole issue is that I run a report from a form, and the query of the report is based on the temporary table.

  what I want to know is, when I run the report from inside my form, is considered a new session, and this is why the report cannot see the data in the table of tempo or am I wrong?

  Thank you

  > when I run the report of my form, which constitutes a new session, and this is why the report cannot see the data in the table of tempo, or am I wrong?

  You're not bad. Forms and reports use separate database sessions. Reports can not see TWG data entered via Forms module.

  Concerning

• insert into the summary table of the table.

  I was wondering if there is a smart way to do it with SQL, but I'm not sure. I would like to consult you yo guys.
  
  I have a table like this

   CREATE TABLE "TEMPLE_FINANCE"."TEST" 
     (     "COLUMN1" VARCHAR2(10 BYTE), 
       "COLUMN2" VARCHAR2(10 BYTE), 
       "COLUMN3" VARCHAR2(10 BYTE), 
       "COLUMN4" VARCHAR2(10 BYTE)
     ) ;
  
  
  Insert into TEST (COLUMN1,COLUMN2,COLUMN3,COLUMN4) values ('1','2','50.00',null);
  Insert into TEST (COLUMN1,COLUMN2,COLUMN3,COLUMN4) values ('1','2','50.00',null);

  I would like to at the rate of an update and you end up with

  "COLUMN1"     "COLUMN2"     "COLUMN3"     "COLUMN4"
  "1"                  "2"          "100.00"     

  What update statement can run for this?
  I would enter in the summary of the lines based on the column 1 and column2 and get rid of repeative lines.
  I have try this insert statement, but it's bascially just adding an extra record in the table.
  

  INSERT INTO  TEST (SELECT COLUMN1, COLUMN2, SUM(COLUMN3), COLUMN4 FROM TEST GROUP BY COLUMN1, COLUMN2,COLUMN4);

  any help would be grateful.
  
  Published by: mlov83 on January 25, 2013 12:45
  
  Published by: mlov83 on January 25, 2013 13:03

  Hello

  I can't help but wonder if you have the best design of table for what it is, you need to do.

  The best solution would be to create a new table, using the SUM (TO_NUMBER (Column3)) and GROUP BY, and then delete the original table and rename a new one to the old name. While you're at it, change Column3 as a NUMBER and add a primary key.

  In collaboration with just the existing table, INSERT one won't work. INSERT always adds new lines. You want something that can INSERT new lines (or update some existing routes) and DELETE lines at the same time. FUSION can do it all. Here's a way to use the MERGE:

  MERGE INTO     test     dst
  USING   (
            SELECT column1, column2, column4
            ,      SUM (TO_NUMBER (column3))
                               OVER (PARTITION BY  column1, column2, column4)
                              AS column3_total
            ,      ROWID             AS r_id
            ,      MIN (ROWID) OVER (PARTITION BY  column1, column2, column4)
                                        AS min_r_id
            FROM    test
       )          src
  ON     (src.r_id     = dst.ROWID)
  WHEN MATCHED THEN UPDATE
  SET     dst.column3       = TO_CHAR ( src.column3_total
                              , 'FM9999999.00'
                          )
  DELETE
  WHERE     src.r_id     != src.min_r_id
  ;
  

  Published by: Frank Kulash on January 25, 2013 16:07

• "missing the SELECT keyword" error during an insert into the temporary table using the blob value

  I'm trying to insert into an oracle temp table using select that retrieves data from a blob field but I get the error: "lack the SELECT keyword.

  How we store temporary in oracle result when we make this type of operation (extraction of data in fields and try to load them into a separate table on the fly.?)

  with cte as)

  Select user_id, utl_raw.cast_to_varchar2 (dbms_lob.substr (PREFERENCES)) as USER my_blob

  )

  create table new_table as

  SELECT user_id,EXTRACTvalue(xmltype(e.my_blob),'/preferences/locale') regional settings

  E ETC

  ----------------------------------------------------------------------------------

  BLOB data - value - which is

  <? XML version = "1.0" encoding = "ISO-8859-1" ?>

  - < Preferences >

  < time zone > America/New_York < / > zone

  < displayscheduleinusertimezone > Y < / displayscheduleinusertimezone >

  < local > Spanish < /locale >

  < DateFormat > JJ/mm/aaaa < / DateFormat >

  < timeFormat > hh: mm aaa < / timeFormat >

  < longformat > Long_01 < / longformat >

  < doubleformat > Double_01 < / doubleformat >

  < percentformat > Percentage_01 < / percentformat >

  < currencyformat > Currency_01 < / currencyformat >

  < / Preferences >

  A WITH clause that must immediately precede the SELECT keyword:

  SQL > create table t:

  2 with the o as (select double dummy)

  3 select * West longitude;

  Table created.

• records by inserting into one another table

  Hi Masters

  I have to insert records from table to table b, which do not exist in table b. Please, help me in this record.

  create table test1 (eno number (2), ename varchar2 (10));

  Insert into test1 values(1,'abc');
  Insert into test1 values(2,'xyz');
  Insert into test1 values(3,'pqr');
  Insert into test1 values(4,'vara');

  create table test2 (eno number (2), ename varchar2 (10));

  Insert into test2 values(2,'xyz');
  Insert into test2 values(4,'vara');

  I tried like this...

  SQL > get the ap;
  1. INSERT ALL
  2. WHEN r_num = 1
  3 THEN IN VALUES test2 (eno, ename)
  4 OTHER INTO test2 VALUES (null, null)
  5. SELECT eno, ename
  6, ROW_NUMBER () OVER (PARTITION BY eno, ename)
  7 ORDER BY eNAME - or else
  8                             )  AS r_num
  9 * FROM test1
  SQL > /.

  4 lines were created.

  SQL > select * from test2;

  ENO ENAME
  ----- ----------
  2 xyz
  4 vara
  1 abc
  2 xyz
  3 pqr
  4 vara

  6 selected lines.

  the result above is not correct... Please advice.

  Concerning

  Evelyne

  Use MERGE:

  SQL > select * from test1;

  ENO ENAME
  ---------- ----------
  1 abc
  2 xyz
  3 pqr
  4 vara

  SQL > select * from test2;

  ENO ENAME
  ---------- ----------
  2 xyz
  4 vara

  SQL > fusion
  2 in test2
  3 using test1
  4 you (test1.eno = test2.eno and test1.ename = test2.ename)
  5 when not matched
  6. then insert
  7 values(test1.eno,test1.ename)
  8.

  2 lines merged.

  SQL > select * from test2;

  ENO ENAME
  ---------- ----------
  2 xyz
  4 vara
  3 pqr
  1 abc

  SQL >

  SY.

• Record is not inserted into the transparent Table Forms 10g

  Hi all
  
  I have the built in 10g (10.1.2.0.2) form.
  
  Basically, the form has 2 blocks.
  1 block with a single element, where we enter a value and press on enter (this place you block2 and run the query).
  Block 2 (tabular) will get the records. This block2 have now 3 columns (caseid, userid, date).
  
  Now when I insert a new record, I just need to get the caseid only. And username and date must be filled in automatically.
  I can fill fields username and the DATE.
  And when I enter a value element of the block 2 caseid and then Control + S(to insert the record and Save the transaction),.
  I get the message saying FRM-40400: transactions: 1 applied and saved records.
  But when I ask again for the same thing, I do not have is the record inserted into the table.
  Why is this happening?
  
  Help please...

  Drop the trigger for INSERTION WE (do not comment code or write NULL) and move your code to INSERT before trying.

  -Clément

• Select values from the db1 table and insert into the DB2 table

  Hello
  
  I have three databases oracle running in three different machines. their ip address is different. among the DB can access databases. (means am able to select values and insert values into tables individually.)
  
  I need to extract data from the DB1 table (ip say DB1 is 10.10.10.10 and the user is DB1user and the table is DB1user_table) and insert the values into DB2 table (say ip DB2 is 11.11.11.11 and the user is DB2user and table DB2user_table) of DB3 that is to have access to the two IPs DB.
  
  How do I do this
  
  Edited by: Aemunathan on February 10, 2010 23:12

  Depending on the amount of data must be moved between DB1 and DB2, and the frequency at which this should happen, you might consider the SQL * COPY more control. I think it's very useful for one-off tasks little, so I can live within its limits of the data type. More http://download.oracle.com/docs/cd/E11882_01/server.112/e10823/apb.htm#i641251.

  Change some parameter of sqlplus session are almost mandatory in order to get decent transfer rates. Tuning ARRAYSIZE and COPYCOMMIT can make a huge difference in flow. LONG change may be necessary, too, depending on your data. The documentation offers these notes on use:

  To activate the copy of data between Oracle and databases non-Oracle, NUMBER of columns is replaced by DECIMAL columns in the destination table. Therefore, if you are copying between Oracle databases, a NUMBER column with no precision will become a DECIMAL column (38). When copying between Oracle databases, you must use SQL commands (CREATE TABLE AS and INSERTION), or you must make sure that your columns have a specified precision.

  SQL * the VALUE LONGER variable limits the length of the LONG column you are copying. If all LONG columns contain data exceeds the value of LONG, COPY truncates the data.

  SQL * Plus performs a validation at the end of each successful COPY. If you set the SQL * variable more COPYCOMMIT DEFINED to a value positive n, SQL * Plus performs a validation after copying all lots n of records. The SQL * Plus ARRAYSIZE variable SET determines the size of a batch.

  Some operating environments require that the service names be placed between double quotes.

  From a SQL * Plus term on DB3, can resemble the command to move all content from my_table in DB1 to the same table in DB2

  COPY from user1/pass1@DB1 to user2/pass2@DB2 -
  INSERT INTO my_table -
  USING select * from my_table
  

  Note the SQL code * more line-continuation character ' - '. It is used to escape the newline character in a SQL * Plus command if you do not have to type all on one line. I use it all the time with this command, but I can't locate the documentation on that right now. Maybe someone else can put their finger on it.

  There are other ways to accomplish what the command copy and it is not without its quirks and limitations, but I find that there is usefulness in an Oracle Toolbox.

• Data does not get inserted into the Hxt_Add_Assign_Info_F table

  Hello
  
  Can tell me regarding when the data is inserted into the Hxt_Add_Assign_Info_Ftable.
  Lately this table not get updates.
  
  Thank you
  Bitr

  When you enter the assignment of time information, this table is filled (responsibility of the OTL Application Developer > OTL time accounting > assignment of time information)

• Splitting words before inserting into the new table

  SQL> desc company
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   CO_ID                                     NOT NULL NUMBER(9)
   R_DATE                                             TIMESTAMP(0)
   CONAME                                             VARCHAR2(140)
   ESTYR                                              NUMBER(5)
   COUNTRY                                            VARCHAR2(32)
   PRODUCTS                                           VARCHAR2(3900)
  
  SQL> select unique(products) from company where rownum<6;
  
  PRODUCTS
  --------------------------------------------------------------------------------
  bars,tubes,pre-weld seams,isosceles and un-isosceles angles,special profiles,u-p
  rofiles,plates,t-profiles,flanges,tube fittings,round,hollow bars,double-t-profi
  les (ipe und ipb),pipe clamps,flat,special designs according to drawings for new
   products,profiles for floor covering,hexagon
  
  carbon steel bright bars,tool steel bright bars,alloy steel bright bars,stainles
  s steel bright bars
  
  cold rolled coil,e.g sheet,prepainted sheet,galvalume coil,copper scrap,stainles
  s steel sheet,shredded scrap,hms1 and 2,cobalt ore,rail scrap,hot rolled coil,ga
  lvanized sheet,iron ore
  
  PRODUCTS
  --------------------------------------------------------------------------------
  
  ferro alloy producer
  switch technology,special tubes,rails,steel strip,special steel

  I created another table:

  crate table keywords(
  k_id number(14),
  keywords varchar2(500) unique
  );
  
  create sequence keywords_pk_seq
  start with 3484 increment by 1;
  
  create or replace trigger keywords_pk_trig
  before insert on keywords
  referencing new as new
  for each row
  begin
  select keywords_pk_seq.nextval into :new.k_id
  from dual;
  end;
  /

  I want to:
  one) to split columns of company.products where is comma (,) for example, bars, tubes, pre-soudures, tubes will became 4 different as words:
  bars
  tubes
  welds
  tubes
  
  (b) then I want to insert these words in the table keywords.keywords with condition separated by ignoring the existing keywords.keywords (e.g. tubes came twice, let's get just a tubes) for example
  k_id keywords
  1 bars
  2 tubes
  3 before welding
  
  Thank you and best regards

  You can use the merge statement:

  for example

  merge into keywords
  using (
  with t as (select 'pipes,taps,spanner,spade,tubes' as txt from dual)
  -- end of sample data
    select distinct REGEXP_SUBSTR (txt, '[^,]+', 1, level) kw
    from t
    connect by level <= length(regexp_replace(txt,'[^,]*'))+1
    ) x
   on (keywords.keyword = x.kw)
  when not matched then insert (id, keyword) values (key_seq.nextval, x.kw)
  /
  

  But keep in mind that the sequence in this example will be updated for each line independently to know if she gets inserted or not.
  If you set the ID using a sequence triggered when inserting then this will solve this problem.

• Insert into select * from table 3. -is on the agenda by the needless?

  I've got an example of script, it will work for any table, so I don't bother with the full ddl.
  
  ----------------------------------------------------------------------------
  create table test in select * from hotels where 1 = 2;
  
  Insert into test select * from Hotels by city;
  
  Select the city from the trial;
  
  -drop table test is serving;
  -----------------------------------------------------------------------------
  
  The amazing thing is, that the city is ordered alphabetically,
  but you would say it is that an operation order is irrelevant.
  
  Any ideas on that?
  
  This will still work?
  
  Edited by: FourEyes on December 8, 2008 22:55
  
  Edited by: FourEyes on 8 December 2008 22:56
  
  Edited by: FourEyes on 8 December 2008 22:56

  Hello

  The [SQL Oracle 10 language reference | http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_9014.htm#sthref9371] manual says:

  «In regards to the ORDER BY clause from the subquery in the DML_table_expression_clause, you place your order is guaranteed only for the inserted rows and only within each extension table.» Orders new lines with regard to existing lines is not guaranteed. »

• Make some lines in a table based on a condition.

  I have a table based on a View object that displays four columns: Secure, Description, username and Date.

  Currently it displays all the data based on the request of the VO.  When a user clicks on a line, the complete 'Description' is showed in a below - rich text editor where it can be updated and saved in the database.

  I am facing a problem of application of security for the page.  The scenario is as follows:

  If a logged-in user (defined in the flowrate range of Page), does NOT match the user name on a specific line (user name of the database), AND "Safe" is TRUE (in the case of the database, '1'), then the 'Description' should NOT be visible.

  Looks like I can set the property 'Lent' on the specific Description column, but if it is not made and the user clicks on the line, the value of the Description always displayed in the below rich text editor.

  What would be the best way to do this?  Is it possible to manually set the Description of the '< Secured >"(or something) in the table and the text of the editor if the condition is true? I hope that this is possible is because I want that line to be always present, just the Description hidden in both components.

  This should be done by programming or can be done with an EL expression?

  If by programming is the only way, how can I write logic for Page loading?

  Thank you!

  This can be done with an EL expression. You can write an EL expression for visible or properties readonly or disabled of the elements present within af: column.

  The EL expression can look like the line is #{pageFlowScope.userName. The name}, click the line if you have written the code to display Description in your bean to manage programmatically you can access pageFlowScope username and apply the same condition.

• How can I make the JPG images inserted into a visible table cell?

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW has been great to work for ten years. I have a very simple website with a few tables and multiple images.

  He did all of a sudden all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  I need to make changes to the site, but I'm frustrated. I can't add or replace images.

  I don't want to upgrade to creative cloud.

  Help!

  Benniemc wrote:

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW works a lot for ten years. I have a very simple website with a few tables and multiple images.

  He suddenly made all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  It's all good and dandy that Nancy and Jon say that they see your site online will be images. Correct me if I'm wrong but... the real problem is that just inserted images are not visible in Dreamweaver making any visibility on the site online a moot point, right?

  best,

  Shocker

• delete all, then insert into the target table, two steps in one transaction?

  Hello
  
  We have the following two steps in one ODI package, it will be managed in a single transaction?
  
  procedure step 1): remove all of the target table.
  interface in step 2): insert data in the source table in the target table.
  
  our problem is that step 2 can take some minutes, and then the target table can temporary unusable for end users who try to access it, I'm good?
  
  Kind regards
  Marijo

  Hello

  It can be managed in a single transaction by selecting IKM as the Append and TRUNCATE/DELETEALL Option command in the FLOW of an interface tab.

  Thanxs
  Malezieux

• error when insert into the xmltype table

  Hi expert,
  
  I'm in I'm in Oracle Enterprise Manager 11 g 11.2.0.1.0.
  SQL * more: Production of release 11.2.0.1.0 killed him Feb 22 11:40:23 2011
  
  I correctly applied several .xml files in the table xmltype DOCUMENT by using this PROCEDURE.
  But only received the error, because he understood "the House of McVay.
  My codes and messages are listed below:
  
  SQL > CREATE or REPLACE PROCEDURE loadxml IS
  77
  EXCEPTION 78
  79, SO THAN OTHERS THEN
  raise_application_error 80 (-20101, ' Exception occurred in a procedure loadxml :'||) SQLERRM);
  LoadXml END 81;
  82.
  
  CAUTION: Procedure created with compilation errors.
  
  SQL > show the error;
  LOADXML PROCEDURAL errors:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  18/31 PLS-00103: encountered the symbol "S" when expecting one of the
  Next:
  * & = - + ; <>/ is mod remains not rem
  < an exponent (*) > <>or! = or ~ = > = < = <>and like2 or
  like4 likec between | submultiset of type multiset Member
  
  Is there someone can help?
  
  Thank you!
  
  Cow
  
  Published by: cow on March 22, 2011 21:50

  Basic SQL/PLSQL: Given that you create a string a single quotation mark is represented by two "characters...

  However, you should probably use & apos; rahther as a single quote

  Published by: mdrake on March 18, 2011 15:44