Insert tables in the tables

Well, it is a Board problem. I have an experience that changes the parameter 1 (temp), then parameter change 2 (v) a number of times, with data output. the process is then repeated. I would like to get a picture that looks like

V1 T1 data table

V2 T1 data table

V3 T1 data table

V1 T2 data table

V2 T2 data table

V3 T2 data table

V1 T3 data table

etc.

'case 2' is my first attempt at implementation of the table in the data stream to write the file. Clearly, this does not work and does not the data of the most recent temperature.

'case 4' is my last attempt. I enter all the data in a table, but it seems that it is an array of 3 - d when the schema specifies only 2D table.

The problem is at the end of the block diagram. Any advice on cleaning the other parts of the program are also accepted (Note: the interface should avoid visa - for reasons that I won't go in). I'm sure it's a quick fix and thank you for taking the time to help me.

Some ideas I had, but has failed to implement create a sub-table and inserting them in a main draw (4 cases). Creation of 2D (outside the cycle of volt) tables and add them. Insertion of simple elements in arrays of brute force (I know not how to do this, but there must be an easier way, it comes to Labview).

Maybe you are frustrated to see the table reset with each iteration, showing that the current measure. Shift registers are your solutions:

Of course, as Jorn wrote, if you have a large number of measures you should initialyze the table with the appropriate number and the use of 'replace' instead of 'Building the table', but it seems that this is not your case.

LVM/TOC files are not Excel files, but can be imported using TDM Excel Add - In. In addition, you can write directly to Excel using automation or screw of Report Generation Toolkit, if you (search in the finder of the example excel).

Tags: NI Software

Similar Questions

Insert data into the source of destinator Table

Hi all
Need to insert data in sample_table1 table xxc_source_table sample_table2
create table xxc_source_table (DESCRIPTION varchar2 (10));
Insert the table xxc_source_table values('A201.) ABC.4084.GR');
create table sample_table1 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10));
create table sample_table2 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10), moved_flag varchar2 (2));
col_1 = A201
col_2 = ABC
col_3 = 4084
col_4 = GR
Note: Insert data into the col_1, the col_3, the col_4 of the xxc_source_table sample_table1
(2) if the next (form xxc_source_table) data is exist in the sample_table2, and then set the moved_flag as Y in this column
3) xxc_source_table has 17000 lines
Thank you.
Post edited by: Rajesh123 please do not consider cross the line message

Hi Renon,

Why you don't want substr and instr? For best performance, you should go with substr and instr instead of regexp_substr. However you asked me to provide the code instead of substr and InStr. Then try the below...

INSERT ALL

IN VALUES sample_table1 (col1, col2, col3, col4)

IN sample_table2 VALUES (col1, col2, col3, col4, 'Y')

SELECT REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 1) col1,.

REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 2) col2.

REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 3) col3.

REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 4) col4

OF xxc_source_table;

Thank you

Ann

Button insert data to the table

Hello
I use APEX 4.2.3 with XE, I try to insert data into the table using code below but nothing happen when I press the button, create this button like 'create a button to point to page'-> 'dynamic action'-> 'run pl/sql '.
```
begin
insert into dummy values('xx');
commit;
end;
```
So to clarify, you have

(1) created a button that "action" is "defined by the dynamic action.

(2) created a dynamic action that executes pl/sql at the click on the button and you are pl/sql?

Insert newspapers in the errors table
Hello

I want to insert errors in the custom error message table.
eventhogh is runs properly but I cannot insert rows in the error table.

This is the code.

DECLARE
v_status VARCHAR2 (20);
cursor c1
is
Select * from all_errors
When type = 'PROCEDURE '.
and name = upper ('updatecourse');
v_rec c1% rowtype;
BEGIN
Select the State
in v_status
of object
where object_type = upper ('PROCEDURE')
and object_name = upper ('updatecourse');
If v_status = "INVALID" Then
Open c1;
loop
Fetch c1 in v_rec;
When exit c1% notfound;
insert into values of error_log (owner, name, type, text) (v_rec.owner, v_rec.name, v_rec.type, v_rec.text);
end loop;
Close c1;
end if;
END;

Please let me know what to do.

Thank you
Rami Reddy.
Why a loop?

You can manage in a simple SQL statement... (Not tested, just to give an idea). I hope that you don't have the name of this procedure in the two schemas
```
insert into error_log(owner,name,type,text)
select owner,name,type,text
from all_errors
where type='PROCEDURE'
and name=upper('updatecourse')
and 'INVALID' =
   (
   select o.status
   from all_objects o
   where o.object_type=upper('PROCEDURE')
   and o.object_name=upper('updatecourse');
   );
```

What trigger to use to insert data into the table db forms
Hello

My form is current having a block of database with the table reference. When you enter data into the form field and click Save. Automatically record is inserted in the database table.
I want to do this under manual insert. I changed the block of data to a data non-base. Where should I write the insert statement to insert data into the table.
Is - shutter release key of the form-level validation?

Please notify.

Thank you
Didi.
You can guide me how to remove the message FRM-40401 no changes to save and instead, I wanted to put 1 transaction record successful... some like it like that.

Hi didi.
And this is my last post I'll sleep. ;)
Take form level trigger named preform
and write on it
```
:SYSTEM.MESSAGE_LEVEL := 5;
```
I hope this works...

Hamid

Mark correct/good to help others to get the right answers. *

Cannot perform the insert/update on the form of tables, due to the dynamic action
Hi all

I created a dynamic action that calculates multiple cells in a table.

This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.

But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.

All guess where is the problem?

Apex version: 4.1.1.00.23

Jiri
Nina wrote:

I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
>

What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.

Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.

Oh, here comes the jQuery selector:
```
var clickedRow = $(this.triggeringElement).closest('tr');

$(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
```
SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
So, target the specific entry.
With the code example:
```
Comm
```
change the switch on
```
$(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
```

How to insert data into the table by using the expression builder in the assign activity
How to insert data into the table by using the expression builder in affect business in BPEl, I use SOA Suite 11.1.1.5
Can someone help me please
Hello

I don't think that oraext:query-database() can insert data into the table.

What are your needs?
Can not you plan to use the DB adapter with the insert operation?

Kind regards
Neeraj Sehgal

Insert first in the results of the empty table in ORA-00001: unique constraint

Hi all
We are running Oracle 10 g. I modified an Oracle stored procedure instead of using the cursor for loops or bulk collect for use INSERT with the SELECT statement. When I run this version, I get ORA-00001 on first insertion. ONCE the exception is thrown. I checked that the array is empty. I don't think the ORA-00001 is the real cause of the problem. I have a syntax problem I'm not aware of.

Here's the script:

 
CREATE OR REPLACE PROCEDURE SP_LOAD_TEST
 (p_rpt_month    varchar2)
IS

--===================================================
-- define exceptions
--===================================================

DUP_VAL_ON_INDEX              EXCEPTION;

--===================================================
-- read the USER data
--===================================================
CURSOR c_get_USERS_TBL IS
select DIV_CD,
         WRKR_USER_ID,
         RPT_MONTH 

from  USERS_TBL
 WHERE RPT_MONTH = P_RPT_MONTH
 ORDER BY DIV_CD,
                WRKR_USER_ID;
   
--===================================================
-- get the location name from the TLOC_DMSN table 
--===================================================
CURSOR c_wrkr_loc_name ( p_wrkr_user_id varchar2) IS
select WRKR_LOC

from  .TLOC_DMSN
 WHERE TRIM(wrkr_user_id) = TRIM(p_wrkr_user_id);

--===================================================
-- define a place holder for each row fetched from each cursor
--===================================================
c_get_USERS_TBL_row            c_get_USERS_TBL%ROWTYPE;

--===================================================
-- define variables
--===================================================

v_elapsed_time                  VARCHAR2(50);
v_elapsed_time_hh             FLOAT;
v_elapsed_time_mi             FLOAT;
v_elapsed_time_ss             FLOAT;
v_mod_ss                          FLOAT;
v_mod_mi                          FLOAT;
v_elapsed_time_minus_ss   FLOAT;

v_div_cd1                            USERS_TBL.div_cd%TYPE;
v_wrkr_user_id1                  USERS_TBL.wrkr_user_id%TYPE;
v_rpt_month1                      USERS_TBL.wrkr_user_id%TYPE;                 

v_div_cd2                           USERS_TBL.div_cd%TYPE;
v_wrkr_user_id2                 USERS_TBL.wrkr_user_id%TYPE;
V_rpt_month2                    USERS_TBL.rpt_month%TYPE;
v_usage_hour                    FACT_TBL.usage_hour%TYPE;
v_bytes_sent                      FACT_TBL.bytes_sent%TYPE;
v_bytes_rcvd                      FACT_TBL.bytes_rcvd%TYPE;
v_total_bytes                      FACT_TBL.total_bytes%TYPE;
v_div_nm                           FACT_TBL.div_nm%TYPE;
v_wrkr_loc                         .TLOC_DMSN.WRKR_LOC%TYPE;
v_wrkr_dspl_nm                 FACT_TBL.wrkr_dspl_nm%TYPE;
v_wrkr_ph                         FACT_TBL.wrkr_ph%TYPE; 
v_url                                 FACT_TBL.url%TYPE;
v_divcd_userid                  VARCHAR2(12);
v_prev_divcd_userid          VARCHAR2(12);
v_prev_div_cd                    USERS_TBL.div_cd%TYPE;
v_prev_wrkr_user_id          FACT_TBL.wrkr_user_id%TYPE;
v_date_id                            NUMBER(10);
v_user                                CHAR(8);
v_seq_id                          NUMBER;
v_insert_counter               NUMBER;
v_mmyyyy                        VARCHAR2(6);
v_mm                              VARCHAR2(2);


BEGIN



--===================================================
-- initialize variables
--===================================================
v_div_cd1 := ' ';
v_prev_div_cd := ' ';
v_wrkr_user_id1  := ' ';
v_wrkr_loc := ' ';
v_rpt_month1 := ' ';  
v_divcd_userid := ' ';
v_prev_divcd_userid := ' ';
v_prev_wrkr_user_id := ' ';
v_insert_counter := 0;
v_seq_id := 0;
v_mmyyyy := ' ';

--===================================================
-- build run month in mmyyyy format before writing to TLOAD_LOG table
--===================================================
CASE 
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'JANUARY'    THEN    v_mm := '01';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'FEBRUARY'  THEN  v_mm := '02';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'MARCH'       THEN    v_mm := '03';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'APRIL'          THEN  v_mm := '04';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'MAY'            THEN    v_mm := '05';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'JUNE'           THEN  v_mm := '06';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'JULY'            THEN    v_mm := '07';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'AUGUST'       THEN  v_mm := '08';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'SEPTEMBER'  THEN    v_mm := '09';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'OCTOBER'      THEN  v_mm := '10';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'NOVEMBER'     THEN    v_mm := '11';
        WHEN UPPER(SUBSTR(p_rpt_month,1,INSTRB(p_rpt_month,'-',1,1)-1)) = 'DECEMBER'     THEN  v_mm := '12';                
 END CASE;

v_mmyyyy := v_mm||substr(p_rpt_month,INSTRB(p_rpt_month,'-',1,1)+1,4);


--===================================================
-- get the name of user running this procedure
--===================================================
v_user  := ' ';
select user into v_user from dual;


--===================================================
-- get date id for the current date
--===================================================
v_date_id        := 0;
select date_id into v_date_id from  .dwtime5 where DWDATE = trunc(sysdate);


--===================================================
-- read each ROW IN the users TABLE
--===================================================
-- Open the cursor and intialize the active set
Open c_get_USERS_TBL;

-- Retrieve the first row, to setup for the WHILE loop
FETCH c_get_USERS_TBL into c_get_USERS_TBL_row;

-- Continue looping while there are more rows to fetch
WHILE c_get_USERS_TBL%FOUND LOOP
     v_div_cd1 := c_get_USERS_TBL_row.div_cd;
     v_wrkr_user_id1 := c_get_USERS_TBL_row.wrkr_user_id;
     v_rpt_month1 := c_get_USERS_TBL_row.rpt_month;
       
    CASE
    WHEN v_div_cd1 <> v_prev_div_cd THEN
              v_prev_divcd_userid := v_divcd_userid;
              v_divcd_userid := v_div_cd1||v_wrkr_user_id1; 
    WHEN v_wrkr_user_id1 <> v_prev_wrkr_user_id THEN
             v_prev_divcd_userid := v_prev_div_cd||v_prev_wrkr_user_id;
             v_divcd_userid := v_div_cd1||v_wrkr_user_id1;
    END CASE;
    
    
    Open c_wrkr_loc_name(v_wrkr_user_id1);
     Fetch c_wrkr_loc_name INTO v_wrkr_loc;
     IF c_wrkr_loc_name%NOTFOUND THEN
         v_wrkr_loc := NULL;
     END IF;
    Close c_wrkr_loc_name ;   
 
  v_seq_id := 0;
   select SEQ_USER_ID.nextval into v_seq_id from dual; 
   
   INSERT INTO  DETAIL_TBL_TEST(DETAIL_PK_ID,  
                                DIVCD_USERID,
                                WRKR_USER_ID,
                                WRKR_DSPL_NM,
                                RPT_MONTH,
                                USAGE_HOUR,
                                DIV_CD,
                                DIV_NM,
                                WRKR_LOC,
                                BYTES_RCVD,
                                BYTES_SENT,
                                TOTAL_BYTES,
                                WRKR_PH,
                                URL,
                                CREATE_DT,
                                CREATE_USER,
                                CREATE_PGM,
                                UPDATE_DT,
                                UPDATE_USER,
                                UPDATE_PGM )
                         SELECT v_seq_id,
                                v_divcd_userid,
                                wrkr_user_id,
                                wrkr_dspl_nm,
                                rpt_month,
                                usage_hour,
                                div_cd,
                                div_nm,
                                v_wrkr_loc,
                                bytes_rcvd,
                                bytes_sent,
                                total_bytes,
                                wrkr_ph,
                                url,
                                SYSDATE,
                                v_user,
                               'SP_LOAD_DETAIL_TBL',
                                SYSDATE,
                                v_user,
                               'SP_LOAD_DETAIL_TBL'
                          FROM  FACT_TBL, 
                                DUAL                                                              
                          WHERE DIV_CD = v_div_cd1
                            AND TRIM(wrkr_user_id) = TRIM(v_wrkr_user_id1)                    
                            AND rpt_month = v_rpt_month1
                          ORDER BY DIV_CD,
                                   WRKR_USER_ID; 

     v_insert_counter := v_insert_counter + 1;
     IF v_insert_counter >= 500 THEN
    -- commit changes
        COMMIT;
        v_insert_counter := 0;
     END IF;
     
   FETCH c_get_USERS_TBL into c_get_USERS_TBL_row;
END LOOP;

Close c_get_USERS_TBL;


--===================================================
-- final commit
--===================================================
COMMIT;



EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
         DBMS_OUTPUT.PUT_LINE('Attempting to insert a row that already exists!!!');
WHEN OTHERS THEN RAISE;
--END;
 


--===================================================
-- procedure ended.
--===================================================

END;

Thank you for your help,

Seyed

Hello

I guess that the error you receive notice when you were in that sequence was ORA-02287: unauthorized by sequence number. This is because you had the ORDER BY clause in there. If you get rid of it, you can just use the sequence number in the insert without the need first to select it...

With ORDER BY


XXXX> insert
  2  into
  3      dt_t1
  4  SELECT
  5          dt_seq.NEXTVAL,
  6          SYSDATE
  7  FROM
  8      dual
  9  CONNECT BY LEVEL
 10      <=10
 11  ORDER BY
 12          1
 13  /
        dt_seq.NEXTVAL,
               *
ERROR at line 5:
ORA-02287: sequence number not allowed here

No ORDER OF

XXXX> insert
  2  into
  3      dt_t1
  4  SELECT
  5          dt_seq.NEXTVAL,
  6          SYSDATE
  7  FROM
  8      dual
  9  CONNECT BY LEVEL
 10      <=10
 11  /

10 rows created.

Of course, I guess you want a new id for each row, as seems to be the name of the primary key column.

HTH

David

Published by: Bravid on December 19, 2011 16:07

Published by: Bravid on December 19, 2011 16:08

Insert data into the table particular

Hello

I have a requirement to insert data from table from Oracle 10 g to Oracle 9i table.
The pom_code table should be filled with gr_product table based on a specific schema of codes - i.e. If POM Code corresponds to a specific model, then it must belong to a specific company.

FROM :: Oracle 10g database

gr_product
pr_code varchar2(20 byte)
pr_desc varchar2(80 byte)

To :: Oracle 9i database

pom_code
code      varchar2(12 byte)
desc      varchar2(100 byte)
companyid Number

1. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =10

a. <one digit><.><two digit><alphabet> ex code:  1.01A
b. <one digit><.><two digit><alphabet><space><two alphabet> ex code: 1.01B ZF  

2. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =20
a. <two digit><.><one digit><alphabet> ex code: 10.1A         
b. <two digit><.><one digit><alphabet><space><two alphabet> ex code: 10.5A HR    

3. All gr_product.pr_code with following pattern should go to pom_code.code and companyid =30
a. <alphabet><.><two digit><alphabet>  ex code: B.42A
b. <alphabet><.><two digit><alphabet><space><two alphabet> ex code: N.10B AT

Thank you
Sandy

Hello

The CASE expression I posted earlier does what you want?
If so, please mark the thread as "answered".
If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Includes TABLE of CASH and INSERT statements for some examples of data for all the tables, the results you want from these sample data and your request (or INSERT statement) using the CASE expression. Report where the code you posted does not have what you need and explain how to get good results in these places.

Impossible to insert rows in the table
My insert statement below is not correct, when I try to run, his encoutering error "table or view does not exist.

Basically what I'm doing here collects the table name in THE variable that stores the name of the table in this variable. This variable, I use as a table. I know that's not the right way, please let me how can I insert rows in the complete table with the following code.

DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM model WHERE 1 = 2;
DECLARE
I HAVE INTEGER DEFAULT 1;
S VARCHAR2 (50);
Start
for C (select TABLE_NAME IN s from USER_TABLES where TABLE_NAME like '% of the CABLE' and TABLE_NAME NOT like '% OLD' and the order of 0 > Num_ROWS by TABLE_NAME) loop
INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;

dbms_output.put_line (c.table_name);
end loop;
end;

The insert statement above is not correct. How can I write good way.

Thank you.

Best regards
Arshad
user13360241 wrote:
My insert statement below is not correct, when I try to run, his encoutering error "table or view does not exist.

Basically what I'm doing here collects the table name in THE variable that stores the name of the table in this variable. This variable, I use as a table. I know that's not the right way, please let me how can I insert rows in the complete table with the following code.

DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM model WHERE 1 = 2;
DECLARE
I HAVE INTEGER DEFAULT 1;
S VARCHAR2 (50);
Start
for C (select TABLE_NAME IN s from USER_TABLES where TABLE_NAME like '% of the CABLE' and TABLE_NAME NOT like '% OLD' and order > 0 Num_ROWS of TABLE_NAME) loop
INSERT INTO TEMP SELECT * FROM c.TABLE_NAME;

dbms_output.put_line (c.table_name);
end loop;
end;

The insert statement above is not correct. How can I write good way.

Thank you.

Best regards
Arshad

STMT: = "INSERT INTO TEMP SELECT * FROM ';"

STMT: = STMT. S;
IMMEDIATELY EXECUTE STMT;

Insert and update the nested table

Hello

I created a nested table containing the following columns. I need to insert records into the nested table. And also I have to update the nested table. Please find below my table and get error message.

Please advose...!

SQL> create type details as object(
  2  basic number(7,2),
  3  da number(6,2),
  4  hra number(6,2),
  5  pf number(6,2),
  6  it number(6,2),
  7  gross number(7,2),
  8  ded number(6,2),
  9  net number(8,2));
 10  /

Type created.

SQL> create type details_t is table of details;
  2  /

Type created.


SQL> ed
Wrote file afiedt.buf

  1  create table emp_tab(empno number(4),name varchar2(10),details_tab details_t)
  2* nested table details_tab store as empl_details
SQL> /

Table created.


SQL> ed
Wrote file afiedt.buf

  1* insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null)))
SQL> /
Enter value for empno: 1
Enter value for name: asdf
Enter value for da: 120
Enter value for hra: 130
Enter value for pf: 120
Enter value for it: 120
old   1: insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null
new   1: insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
                                             *
ERROR at line 1:
ORA-02315: incorrect number of arguments for default constructor

Can I use '&' while inserting records in the nested table? Yes / No?

I do need to update also net gross, ded, columns... !!

Please help me... !!

Concerning
A

$ sqlplus scott/tiger

SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 21 16:18:16 2011

Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.

Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options

SQL> CREATE TYPE details AS OBJECT(
 basic NUMBER(7,2),
 da NUMBER(6,2),
 hra NUMBER(6,2),
 pf NUMBER(6,2),
 it NUMBER(6,2),
 gross NUMBER(7,2),
 ded NUMBER(6,2),
 net NUMBER(8,2));  2    3    4    5    6    7    8    9
 10  /

Type created.

SQL> CREATE TYPE details_t IS TABLE OF details;
  2  /

Type created.

SQL> CREATE TABLE emp_tab(empno NUMBER(4),name VARCHAR2(10),details_tab details_t)
 NESTED TABLE details_tab store as empl_details  2
  3  /

Table created.

SQL> INSERT INTO emp_tab VALUES(7001,'Saubhik',details_t(details(100,100,50,10,10,null,null,null)));

1 row created.

SQL> SELECT * FROM TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001);

     BASIC         DA        HRA         PF         IT      GROSS        DED
---------- ---------- ---------- ---------- ---------- ---------- ----------
       NET
----------
       100        100         50         10         10

SQL> ^C

SQL> ed
Wrote file afiedt.buf

  1  UPDATE TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001)
  2     emp_sal
  3*    SET emp_sal.net=emp_sal.basic+emp_sal.da+emp_sal.hra
SQL> /

1 row updated.

SQL> SELECT * FRM emp_tab;
SELECT * FRM emp_tab
         *
ERROR at line 1:
ORA-00923: FROM keyword not found where expected

SQL> SELECT * FROM emp_tab;

     EMPNO NAME
---------- ----------
DETAILS_TAB(BASIC, DA, HRA, PF, IT, GROSS, DED, NET)
--------------------------------------------------------------------------------
      7001 Saubhik
DETAILS_T(DETAILS(100, 100, 50, 10, 10, NULL, NULL, 250))

SQL>

API to insert values into the table of apps
Hello

I created a table with front end applications. Creating columns and rows. Now, I want to insert values in different columns of the corresponding lines.
Can you get it someone please let me know the API that I can use here to insert the column values?

Kind regards!
If you want to insert data in the standard table oracle, then you must use the api instead, then apply the insert statement, this api oracle used to check the validation of the company etc.

Regarding the concern with regard to insert the date as you said, this is why you should use this api 'PAY_USER_COLUMN_INSTANCE_API' to insert data in pl/sql script.

cannot insert data into the PRODUCT_USER_PROFILE table
I've connected to the database as the sysdba, which is installed on VMWARE. database is oracle 11g.
whenever I insert data in the table PRODUCT_USER_PROFILE that the database returns 1 row inserted and then when I try to show everything on the table before or after the statement commit is made the database returns "No. LINES SELECTED.

guys any idea about this problem...
Hello

Try to connect as a system and make the insert and check. Always think about the issue.

-Pavan Kumar N
Oracle 9i / 10g - OCP
http://oracleinternals.blogspot.com/

Published by: pounet on January 4, 2010 16:29

Add more than 2 lines for a select statement without inserting rows in the base table

Hi all

I have a below a simple select statement that is querying a table.

Select * from STUDY_SCHED_INTERVAL_TEMP
where STUDY_KEY = 1063;

but here's the situation. As you can see its return 7 ranks. But I must add
2 rows more... with everything else, default or what exist... except the adding more than 2 lines.
I can't insert in the base table. I want my results to end incrementing by 2 days in
measurement_date_Taken on 01-APR-09... so big measurement_date_taken expected to
end at study_end_Date...

IS IT STILL POSSIBLE WITHOUT INSERT ROWS IN THE TABLE AND PLAYIHY ALL AROUND WITH
THE SELECT STATEMENT?

Sorry if this is confusing... I'm on 10.2.0.3

Published by: S2K on August 13, 2009 14:19

Well, I don't know if this request is as beautiful as my lawn, but seems to work even when ;)
I used the "simplified" version, but the principle should work for your table, S2K.
As Frank has already pointed out (and I fell on it while clunging): simply select your already existing lines and union them with the 'missing documents', you calculate the number of days that you are "missing" based on the study_end_date:

MHO%xe> alter session set nls_date_language='AMERICAN';

Sessie is gewijzigd.

Verstreken: 00:00:00.01
MHO%xe> with t as ( -- generating your data here, simplified by me due to cat and lawn
  2  select 1063 study_key
  3  ,      to_date('01-MAR-09', 'dd-mon-rr') phase_start_date
  4  ,      to_date('02-MAR-09', 'dd-mon-rr') measurement_date_taken
  5  ,      to_date('01-APR-09', 'dd-mon-rr') study_end_date
  6  from dual union all
  7  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('04-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
  8  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('09-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
  9  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('14-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 10  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('19-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 11  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('23-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
 12  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('30-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual
 13  ) -- actual query:
 14  select study_key
 15  ,      phase_start_date
 16  ,      measurement_date_taken
 17  ,      study_end_date
 18  from   t
 19  union all
 20  select study_key
 21  ,      phase_start_date
 22  ,      measurement_date_taken + level -- or rownum
 23  ,      study_end_date
 24  from ( select study_key
 25         ,      phase_start_date
 26         ,      measurement_date_taken
 27         ,      study_end_date
 28         ,      add_up
 29         from (
 30                select study_key
 31                ,      phase_start_date
 32                ,      measurement_date_taken
 33                ,      study_end_date
 34                ,      study_end_date - max(measurement_date_taken) over (partition by study_key
 35                                                                          order by measurement_date_taken ) add_up
 36                ,      lead(measurement_date_taken) over (partition by study_key
 37                                                          order by measurement_date_taken ) last_rec
 38                from   t
 39              )
 40         where last_rec is null
 41       )
 42  where rownum <= add_up
 43  connect by level <= add_up;

 STUDY_KEY PHASE_START_DATE    MEASUREMENT_DATE_TA STUDY_END_DATE
---------- ------------------- ------------------- -------------------
      1063 01-03-2009 00:00:00 02-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 04-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 09-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 14-03-2009 00:00:00 01-04-2009 00:00:00
      1063 03-03-2009 00:00:00 19-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 23-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 30-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 31-03-2009 00:00:00 01-04-2009 00:00:00
      1063 22-03-2009 00:00:00 01-04-2009 00:00:00 01-04-2009 00:00:00

9 rijen zijn geselecteerd.

Is there a simpler way (in SQL), I hope that others join, and share their ideas/example/thoughts.
I feel that it is using more resources there.
But I have to cut the daisies before now, they interfere my 'grass-green-ess";)

How to display a message after inserting line in the table...
Hello

I want to display a message after inserting rows in the table as *' you have inserted a new line with success *'.

I use the ADF button createinsert to insert the rows in table.after that I am stolen it.

After commit I want to display message for the user.for what I need to do.

Please help me.

Sanchez.

Double-click the validation button, to link Action property dialog will appear and then create a method of bean managed for the validation button.
Then, add the following code to the method:

public String saveButton_action() {}
BindingContainer links = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
Object result = operationBinding.execute ();
Note "!" operator has been removed from the default code.
{if (OperationBinding.GetErrors (). IsEmpty())}
FacesContext ctx = FacesContext.getCurrentInstance ();
FacesMessage saveMsg is new FacesMessage ("saved successfully");.
ctx.addMessage (null, saveMsg);
}
Returns a null value.
}

Then, restore the ActionListener value.

I hope this helps.

Insert table elements

Hello, I am new to Labview. I need to build a 1 d array of 10 items. I have a digital control to insert items to the table. Every time that, if I change a digital command value, element should be inserted in table. I would do it with registers at offset. Help, please. Thank you.

Like this?

Insert tables in the tables

Similar Questions

Maybe you are looking for