inserting data in Oracle 9i XML

Hello

I want to insert xml data in a table (crmk_kplusdata).
The procedure runs without error, but no data is inserted into the table.
because the loop exits without a single iteration

My procedure is as follows...

create or replace procedure CRM_UploadKPLUS
(
v_xmlstr IN CLOB,
V_RETURNMSG OUT VARCHAR2
)
AS
XMLTYPE details;

BEGIN
Details: = xmltype.createxml (v_xmlstr);

delete from crmk_kplusdata;

for j IN
(
SELECT XMLTYPE. Extract(value (a), ' Table/Location/text()').getstringval (LIKE v_str1),)
XMLTYPE. Extract(value (a), ' Table/CountriesGrp_Id/text()').getstringval (LIKE v_str2),)
XMLTYPE. Extract(value (a), ' Table/CountriesGrp_ShortName/text()').getstringval (LIKE v_str3),)
XMLTYPE. Extract(value (a), ' Table/Countries_ShortName/text()').getstringval (LIKE v_str4),)
XMLTYPE. Extract(value (a), ' Table/LimitsTypes_ShortName/text()').getstringval (LIKE v_str5),)
XMLTYPE. Extract(value (a), ' Table/DealsGroup/text()').getstringval (LIKE v_str6),)
XMLTYPE. Extract(value (a), ' Table/KdbTables_DisplayName/text()').getstringval (LIKE v_str7),)
XMLTYPE. Extract(value (a), ' Table/DealId/text()').getstringval (LIKE v_str8),)
XMLTYPE. Extract(value (a), ' Table/TradeDate/text()').getstringval (LIKE v_str9),)
XMLTYPE. Extract(value (a), ' Table/MaturityDate/text()').getstringval (LIKE v_str10),)
XMLTYPE. Extract(value (a), ' Table/Kind/text()').getstringval (LIKE v_str11),)
XMLTYPE. Extract(value (a), ' Table/C_Cpty_ShortName/text()').getstringval (LIKE v_str12),)
XMLTYPE. Extract(value (a), ' Table/I_Cpty_ShortName/text()').getstringval (LIKE v_str13),)
XMLTYPE. Extract(value (a), ' Table/FoldersGrp_ShortName/text()').getstringval (LIKE v_str14),)
XMLTYPE. Extract(value (a), ' Table/Currencies_ShortName/text()').getstringval (LIKE v_str15),)
XMLTYPE. Extract(value (a), ' Table/F_Folders_ShortName/text()').getstringval (LIKE v_str16),)
XMLTYPE. Extract(value (a), ' Table/T_TypeOfInstr_ShortName/text()').getstringval (LIKE v_str17),)
XMLTYPE. Extract(value (a), ' Table/Cu_Currencies_ShortName/text()').getstringval (LIKE v_str18),)
XMLTYPE. Extract(value (a), ' Table/D_Amount/text()').getstringval (LIKE v_str19),)
XMLTYPE. Extract(value (a), ' Table/D_Market/text()').getstringval (LIKE v_str20),)
XMLTYPE. Extract(value (a), ' Table/D_Sensitivity/text()').getstringval (LIKE v_str21),)
XMLTYPE. Extract(value (a), ' Table/L_Amount/text()').getstringval (LIKE v_str22),)
XMLTYPE. Extract(value (a), ' Table/Column1/text()').getstringval (LIKE v_str23),)
XMLTYPE. Extract(value (a), ' Table/D_IssueToMat/text()').getstringval (LIKE v_str24),)
XMLTYPE. Extract(value (a), ' Table/D_SettlToMat/text()').getstringval (LIKE v_str25),)
XMLTYPE. Extract(value (a), ' Table/Column2/text()').getstringval (LIKE v_str26),)
XMLTYPE. Extract(value (a), ' Table/KdbTables_Id/text()').getstringval (LIKE v_str27),)
XMLTYPE. Extract(value (a), ' Table/Cpty_Id/text()').getstringval (LIKE v_str28),)
XMLTYPE. Extract(value (a), ' Table/CptyType/text()').getstringval (LIKE v_str29),)
XMLTYPE. Extract(value (a), ' Table/LegalStatus/text()').getstringval (LIKE v_str30),)
XMLTYPE. Extract(value (a), ' Table/Countries_ShortName1/text()').getstringval (LIKE v_str31),)
XMLTYPE. Extract(value (a), ' Table/Column3/text()').getstringval (LIKE v_str32),)
XMLTYPE. Extract(value (a), ' Table/Column4/text()').getstringval (LIKE v_str33),)
XMLTYPE. Extract(value (a), ' Table/Column5/text()').getstringval (AS v_str34))
TABLE
(XMLSEQUENCE(Details.EXTRACT('/NewDataSet/Table'))
) a
)
LOOP

insert into crmk_kplusdata
(
location, countriesgrp_id, countriesgrp_shortname, riskcountry,
limitstypes_shortname, dealsgroup, kdbtables_displayname,
dealid, tradedate, maturitydate, kind, c_cpty_shortname,
i_cpty_shortname, foldersgrp_shortname, lt_currencies_shortname,
f_folders_shortname, t_typeofinstr_shortname, cu_currencies_shortname,
d_amount, d_market, d_sensitivity, l_amount, exhibition, d_issuetomat,
limitsid, tableid, c_cpty_id, cptytype, d_settltomat, legalstatus,
parentcountry, ratingriskcountry, ratingparentcountry
)
values
(
j.v_str1, j.v_str2, j.v_str3, j.v_str4,
j.v_str5, j.v_str6, j.v_str7,
j.v_str8, j.v_str9, j.v_str10, j.v_str11, j.v_str12,
j.v_str13, j.v_str14, j.v_str15,
j.v_str16, j.v_str17, j.v_str18,
j.v_str19, j.v_str20, j.v_str21, j.v_str22, j.v_str23, j.v_str24, j.v_str25, j.v_str26,
j.v_str27, j.v_str28, j.v_str29, j.v_str30, j.v_str31,
j.v_str32, j.v_str33
) ;

END LOOP;
commit;

V_RETURNMSG: = 'Data inserted successfully in KPLUS DATA';

EXCEPTION WHEN OTHERS THEN
ROLLBACK;
V_RETURNMSG: = 'error in inserting DATA KPLUS' | SQLERRM;
END;

This is my XML:

< NewDataSet > < Table > < location > IB < / location > < CountriesGrp_Id > 22444 < / CountriesGrp_Id > < CountriesGrp_ShortName > IND < / CountriesGrp_ShortName > < Countries_ShortName > IND < / Countries_ShortName > < LimitsTypes_ShortName > IBANK-AGG < / LimitsTypes_ShortName > < DealsGroup > derived < / DealsGroup > < KdbTables_DisplayName > Bond Deals < / KdbTables_DisplayName > < DealId > 19873 < / DealId > < TradeDate > 2002-02-20T 10: 39:24.2860000 + 05:30 < /. TradeDate > < MaturityDate > 2012-02-20T 10: 39:24.2860000 + 05:30 < / MaturityDate > < Type > U < / friendly > < C_Cpty_ShortName > UTIBAN-MUM < / C_Cpty_ShortName > < I_Cpty_ShortName > POWER-END < / I_Cpty_ShortName > < FoldersGrp_ShortName > IBANK-ALL < / FoldersGrp_ShortName > < Currencies_ShortName > INR < / Currencies_ShortName > < F_Folders_ShortName > IBSTCSL-PS < / F_Folders_ShortName > < T_TypeOfInstr_ShortName > BNDTAX < / T_TypeOfInstr_ShortName > < Cu_Currencies_ShortName > INR < / Cu_Currencies_ShortName > < D_Amount > 50000000 < / D_Amount > < D_Market > - 58006934.2465 < / D_Market > < D_Sensitivity > 13662.277390219413 < / D_Sensitivity > < L_Amount >-50000000 < / L_Amount > < C Column1 > < / Column1 > < D_IssueToMat > 3652 < / D_IssueToMat > < D_SettlToMat > 3652 < / D_SettlToMat > < Column2 > 0 < / Column2 > < KdbTables_Id > 97 < / KdbTables_Id > < Cpty_Id > 15226 < / Cpty_Id > < CptyType > B < / CptyType > < LegalStatus > HO < / LegalStatus > < IND Countries_ShortName1 > < / Countries_ShortName1 > < Column3 > 0 < / Column3 > < column4 > 0 < / column4 > < column 5 K > < / column 5 > < / Table > < / NewDataSet >

Should be as simple as

....
INSERT INTO crmk_kplusdata
   SELECT EXTRACTVALUE (t2.COLUMN_VALUE, 'Table/Location') location,
          EXTRACTVALUE (t2.COLUMN_VALUE, 'Table/CountriesGrp_Id') countriesgrp_id,
          EXTRACTVALUE (t2.COLUMN_VALUE, 'Table/CountriesGrp_ShortName') countriesgrp_shortname,
  ........
     FROM table (
             XMLSEQUENCE (xmltype (v_xmlstr).EXTRACT ('NewDataSet/Table'))
          ) t2;
.....

Tags: Database

Similar Questions

Insert data into Oracle DB from MS Access Forms
Dear professionals,
How to insert data into the table that reside in the Oracle DB through MS Access forms?
We have already created ODBC link tables Oracle allows you to select data, and it works.
Unfortunately, we can select only the data, but insert, delete and update are not available via MS Access form, even if the user has all permissions on the oracle DB (grant select, insert, update, delete on oracle_table to access_user).

driver: Microsoft ODBC for Oracle
MS Access 2003
Oracle DB 10.2

THX in advance,
Adnan
One would need to know what means "not available". You get a specific error? As far as I know your statement is simply incorrect.
There are perhaps incompatibilties between DLLs Microsoft and Oracle, I would avoid the Microsoft ODBC for Oracle driver like the plague!

---------
Sybrand Bakker
Senior Oracle DBA

Cannot insert data of type string/xml in table
I am able to read the xml through utl_file. String, but I am not able to the same insert into the table through DBMS_XMLSTORE

CDSL_UPLOAD is the download directory
CDSL is the username

PL, let myself be guided if something wrong with the following script

SCRIPT OF THE TRIAL. XML FILE

<? XML version = "1.0"? >
< metadata >
-zip codes >
-< mappings Record = "4" >
CA < STATE_ABBREVIATION > < / STATE_ABBREVIATION >
< ZIPCODE > 94301 < / code >
< / maps >
-< mappings Record = "5" >
< STATE_ABBREVIATION > CO < / STATE_ABBREVIATION >
< ZIPCODE > 80323 < / code >
< ZIP_CODE_EXTN > 9277 < / ZIP_CODE_EXTN >
< / maps >
< / zip codes >
< / metadata >

CREATE TABLE TRIALZIPCODES
(
STATE_ABBR VARCHAR2 (20) NOT NULL
NUMBER ZIP_CODE (10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2 (20)
);

create or replace PROCEDURE first INSTANCE AS
BEGIN
DECLARE
-declaring attributes

charString varchar2 (80);
finalStr varchar2 (4000): = null;
whole rowsp;
v_FileHandle UTL_FILE. TYPE_DE_FICHIER;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
DNAME varchar2 (20);
Start
dnom: = "CDSL_UPLOAD";

-DBMS_XMLGEN.setRowTag (ctx IN ctxHandle, rowTag IN VARCHAR2);
-DBMS_XMLGEN.setRowSetTag (ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-the name of the table specified in our DTD
DBMS_XMLGEN. SETROWSETTAG ("l_context_handle,'s postal Code");
-the name of the data set as shown in our DTD
DBMS_xmlgen.setRowTag (l_context_handle, 'mappings');
-to get the result on the screen
dbms_output. Enable (1000000);
-Open the XML document in read-only mode
v_FileHandle: = utl_file.fopen (dname, 'trial.xml', 'r');

loop

BEGIN

UTL_FILE.get_line (v_FileHandle, charString);
exception
When no_data_found then
UTL_FILE.fclose (v_FileHandle);
"exit";

END;
dbms_output.put_line (charstring);
If finalStr is not null then
finalStr: = finalStr | charString;
on the other
finalStr: = charString.
end if;
end loop;
-for the insertion of XML data in the table
insCtx: = DBMS_XMLSTORE. NEWCONTEXT('CDSL.) TRIALZIPCODES');
insCtx: = DBMS_XMLSTORE. INSERTXML (insCtx, finalStr); --ALSO FAILED HERE
dbms_output.put_line ('INSERT FACT' |) To_char (rowsp));
DBMS_XMLStore.closeContext (insCtx);
END;

TRIAL END;

Procedure returns the following error
ORA-031011 XML parsing failed
ORA-19202 error has occurred in the processing of xml
LPX-00222 error returned to the SAX callback function
ORA-06512 at SYS. XMLSTORE 70 line
ORA-06512 CDSL. FIRST line 47
ORA-06512 line 2

PL I want to know what is the problem with the above script

Thank you
Vishal
Indeed a few questions:

(1) I don't see what possible use of this part:
```
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcode s');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings') ;
```
(2) not really a problem, but do not use UTL_FILE to read XML files. Oracle already provides the practice of methods or procedures to read XML efficiently with an call (see examples below).

(3) in order to use the DBMS_XMLSTORE, the names of XML elements must match the columns in the table exactly, which is not the case here. If you cannot change the structure of the XML or the structure of the table to get an exact match, you can pre-process the file (with XSLT, for example).

So, below is an example of using DBMS_XMLSTORE and an alternative with XMLTable that offers more flexibility:
```
SQL> CREATE TABLE TRIALZIPCODES (
  2    STATE_ABBREVIATION VARCHAR2(20) NOT NULL
  3  , ZIPCODE NUMBER(10, 0) NOT NULL
  4  , ZIP_CODE_EXTN VARCHAR2(20)
  5  );

Table created

SQL> set serveroutput on
SQL> DECLARE
  2
  3   xmldoc   clob;
  4   insCtx   DBMS_XMLStore.ctxType;
  5   dname    varchar2(20) := 'TEST_DIR';
  6   numrows  number;
  7
  8  BEGIN
  9
 10   xmldoc := dbms_xslprocessor.read2clob(dname, 'trial.xml');
 11
 12   insCtx := DBMS_XMLStore.newContext('TRIALZIPCODES');
 13   DBMS_XMLStore.setRowTag(insCtx, 'mappings');
 14   numrows := DBMS_XMLStore.insertXML(insCtx, xmldoc);
 15
 16   dbms_output.put_line('INSERT DONE '||TO_CHAR(numrows));
 17
 18   DBMS_XMLStore.closeContext(insCtx);
 19
 20  END;
 21  /

INSERT DONE 2

PL/SQL procedure successfully completed

SQL> select * from trialzipcodes;

STATE_ABBREVIATION       ZIPCODE ZIP_CODE_EXTN
-------------------- ----------- --------------------
CA                         94301
CO                         80323 9277
 
```
Or,
```
SQL> select *
  2  from xmltable('/metadata/Zipcodes/mappings'
  3         passing xmltype(bfilename('TEST_DIR', 'trial.xml'), nls_charset_id('AL32UTF8'))
  4         columns state_abbr    varchar2(20) path 'STATE_ABBREVIATION'
  5               , zip_code      number(10)   path 'ZIPCODE'
  6               , zip_code_ext  varchar2(20) path 'ZIP_CODE_EXTN'
  7       )
  8  ;

STATE_ABBR              ZIP_CODE ZIP_CODE_EXT
-------------------- ----------- --------------------
CA                         94301
CO                         80323 9277
 
```

Retrieve data from oracle to XML database
Hello

I run a select statement on the oracle database table. It returns me the result as a table. However, I need the result as xml.
for example
So overall the output of a select statement, Select First_Name, Last_Name from table1 is

First name last name
----------------------------------------------
John Lewis
David Jones

then I need in format xml as below

* < row >. *
* < John first name > < / name >. *
* < Lewis Last_Name > < / Last_Name > *.
* < / row > *.
* < row >. *
* < David name > < / name >. *
* < Jones Last_Name > < / Last_Name > *.
* < / row > *.

or

* < row name = "John" Last_Name = "Lewis" / > * "
* < row name = "David" Last_Name = 'Jones' / > * "

In SQL Server, we use for xml auto. How can I get the xml output in oracle? Help, please.

Thank you
Refer to the documentation

http://docs.Oracle.com/CD/B19306_01/AppDev.102/b14259/xdb13gen.htm

Insertion of dates in Oracle
Hello. We need create a file to extract (CSV) to an Informix database to insert date/time in Oracle 10 g. For insert/update successful information, should date/time data be in a specific format? Thank you.
Depending on how you "insert" data in Oracle you should be able to specify the format of the incoming.

If you are using SQL * Loader or external Tables they will allow a format to be.
If you use a different method, it could depend on, but for CSV, I would recommend external Tables.

Insert data as XML into the Oracle Table
Hi all

I have a requirement where the data in XML format, and I need to insert into the Oracle Table. For example, I get XML data in the following format,
< results >
< row >
< BANK_ACCOUNT_ID > 10010 < / BANK_ACCOUNT_ID >
< BANK_ID > 300968 < / BANK_ID >
Vision operations < LEGAL_ENTITY > < / LEGAL_ENTITY >
< BANK_NAME > BofA < / BANK_NAME >
< BANK_ACCOUNT_NUM > 10271-17621-619 < / BANK_ACCOUNT_NUM >
< BANK_ACCOUNT_NAME > BofA-204 < / BANK_ACCOUNT_NAME >
< BRANCH_NAME > New York < / BRANCH_NAME >
USD < CURRENCY_CODE > < / CURRENCY_CODE >
< BALANCE_DATE > 2007 - 11 - 09 < / BALANCE_DATE >
< LEDGER_BALANCE > 432705900.56 < / LEDGER_BALANCE >
< / row >
< row >
< BANK_ACCOUNT_ID > 10091 < / BANK_ACCOUNT_ID >
< BANK_ID > 300984 < / BANK_ID >
Vision industries < LEGAL_ENTITY > < / LEGAL_ENTITY >
Barclay Bank < BANK_NAME > < / BANK_NAME >
< BANK_ACCOUNT_NUM > 70986798 < / BANK_ACCOUNT_NUM >
Bank Multi currency-626 < BANK_ACCOUNT_NAME > Barclays < / BANK_ACCOUNT_NAME >
Reading < BRANCH_NAME > < / BRANCH_NAME >
GBP < CURRENCY_CODE > < / CURRENCY_CODE >
< BALANCE_DATE > 2007 - 11 - 14 < / BALANCE_DATE >
< LEDGER_BALANCE > 24244085.24 < / LEDGER_BALANCE >
< / row >
< row >
< BANK_ACCOUNT_ID > 10127 < / BANK_ACCOUNT_ID >
< BANK_ID > 300968 < / BANK_ID >
< LEGAL_ENTITY > SSC U.S. 01 < / LEGAL_ENTITY >
< BANK_NAME > BofA < / BANK_NAME >
< BANK_ACCOUNT_NUM > 4898744 < / BANK_ACCOUNT_NUM >
< BANK_ACCOUNT_NAME > BofA SSC U.S. 02-7188 < / BANK_ACCOUNT_NAME >
< BRANCH_NAME > New York < / BRANCH_NAME >
USD < CURRENCY_CODE > < / CURRENCY_CODE >
< BALANCE_DATE > 2007 - 11 - 28 < / BALANCE_DATE >
< LEDGER_BALANCE > 10783815.28 < / LEDGER_BALANCE >
< / row >
< / results >

I like to write PLSQL code that will receive these data with XML tags and insert it into the Oracle Table. Is this possible with built-in XML features provided in the Oracle database?

Please Guide...

Kind regards
Priyanka
But the problem is the file XML is to have the details of the records if you carefully observed the XML file. But by using more high statement select I get output in the following format.
ORG_ID REQ_LINE PO_NUMBER EXPECTED_REC_QTY USER_NAME REQ_NUMBER
204204 1444714450 11 64446445 11 OPERATIONSOPERATIONS

The table has only one row, so you get a single row as output.
I'm surprised that you find useful examples showing how to divide the data into several lines.

(1) create the table with the following option, it will optimize the performance of storage and query for large XML documents:
```
CREATE TABLE xxios_xml_data_test(xml_data XMLTYPE)
XMLTYPE COLUMN xml_data STORE AS SECUREFILE BINARY XML
;
```
(2) interview table with:
```
SQL> select x.*
  2  from xxios_xml_data_test t
  3     , xmltable(
  4         '/Results/Row'
  5         passing t.xml_data
  6         columns ORG_ID           number       path 'ORG_ID'
  7               , REQ_NUMBER       number       path 'REQ_NUMBER'
  8               , REQ_LINE         number       path 'REQ_LINE'
  9               , PO_NUMBER        number       path 'PO_NUMBER'
 10               , EXPECTED_REC_QTY number       path 'EXPECTED_REC_QTY'
 11               , USER_NAME        varchar2(30) path 'USER_NAME'
 12       ) x
 13  ;

    ORG_ID REQ_NUMBER   REQ_LINE  PO_NUMBER EXPECTED_REC_QTY USER_NAME
---------- ---------- ---------- ---------- ---------------- ------------------------------
       204      14447          1       6444                1 OPERATIONS
       204      14450          1       6445                1 OPERATIONS
 
```

How to insert data in the XML file?

Hi guys,.
How to insert information into an XML file. I tell you, I have a CFM file with some questions to the user
When users submit this form within the form information is send in an XML file.
How can insert this information in the XML file?
When I don't have a DB?
Thank you
Kind regards
Fabiano Magno Pechibella

You must
1. Read in the XML file
2. Analyze the document in an XML (just one big struct) object
3. Insert your XML code of the object where you need
4. rewrite the XML file with your data now included
You can Google 'ColdFusion working with XML' and find hundreds of items to help you. Here's a beginning tutorial to help you get started:

Intermediate ColdFusion Tutorials - working with XML

XML data to Oracle view

Hello

I get data from a web service via XML.

sample of recovered data is-

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
   <soap:Body>
      <DocResponse xmlns="http://test.com/">
         <DocResult>
            <DocRecords>
               <DocRecord>
                  <DocNo>5265</DocNo>
                  <DocDate>25-JAN-2011</DocDate>
                  <DocOwner>Sam</DocOwner>
               </DocRecord>
               <DocRecord>
                  <DocNo>7225</DocNo>
                  <DocDate>23-JAN-2011</DocDate>
                  <DocOwner>Tom</DocOwner>
               </DocRecord>
               <DocRecord>
                  <DocNo>5754</DocNo>
                  <DocDate>29-JAN-2011</DocDate>
                  <DocOwner>John</DocOwner>
               </DocRecord>
            </DocRecords>
         </DocResult>
      </DocResponse>
   </soap:Body>
</soap:Envelope>

I need to insert data above for a normal table structured like -

SlNo     DocNo     DocDate          DocOwner
1     5265     25-Jan-11     Sam     
2     7225     23-Jan-11     Tom     
3     5754     29-Jan-11     John

I use-
Oracle9i Enterprise Edition Release 9.2.0.1.0

Help, please.

Hello

You can use XMLSequence, it should be available in 9.2:

SQL> create table doc_records (
  2   slno number,
  3   docno number,
  4   docdate date,
  5   docowner varchar2(30)
  6  );

Table created

SQL> alter session set nls_date_language = 'english';

Session altered

SQL>
SQL> DECLARE
  2
  3   v_xml_data xmltype := xmltype('
  4  
  5     
  6        
  7           
  8              
  9                 
 10                    5265
 11                    25-JAN-2011
 12                    Sam
 13                 
 14                 
 15                    7225
 16                    23-JAN-2011
 17                    Tom
 18                 
 19                 
 20                    5754
 21                    29-JAN-2011
 22                    John
 23                 
 24              
 25           
 26        
 27     
 28  ');
 29
 30  BEGIN
 31
 32   INSERT INTO doc_records (slno, docno, docdate, docowner)
 33   SELECT rownum as slno
 34        , extractValue(value(x), '/DocRecord/DocNo', 'xmlns="http://test.com/"') as docno
 35        , to_date(extractValue(value(x), '/DocRecord/DocDate', 'xmlns="http://test.com/"'), 'DD-MON-YYYY') as docdate
 36        , extractValue(value(x), '/DocRecord/DocOwner', 'xmlns="http://test.com/"') as docowner
 37   FROM TABLE(
 38          XMLSequence(
 39            Extract(
 40              v_xml_data
 41            , 'soap:Envelope/soap:Body/DocResponse/DocResult/DocRecords/DocRecord'
 42            , 'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/", xmlns="http://test.com/"'
 43            )
 44          )
 45        ) x
 46   ;
 47
 48  END;
 49  /

PL/SQL procedure successfully completed

SQL> select * from doc_records;

      SLNO      DOCNO DOCDATE     DOCOWNER
---------- ---------- ----------- ------------------------------
         1       5265 25/01/2011  Sam
         2       7225 23/01/2011  Tom
         3       5754 29/01/2011  John

SQL>

Error when trying to insert data into a database through a mediator
I build a simple project on 11g TP$, which consists of a mediator, a file adapter, that reads an xml file and a DB adapter that inserts data in a database.
The mediator connects to the file adapter and the DB adapter through a routing rule that it inserts the data in a table in the database.
When I try to run this project, the input file is consumed by the adapter file, but after I get the following error

SEVERE: Part {body} returns a null value in the message: in
December 5, 2008 14:24:55 oracle.tip.mediator.service.transformation.XSLTransformer getPartDocument
SEVERE: message load useful map source: {opaque=oracle.xml.parser.v2.XMLElement@19b0076}
December 5, 2008 14:24:55 oracle.tip.mediator.service.transformation.MediatorTransformationHandler transform
SERIOUS: Failure of Transformation
oracle.tip.mediator.infra.exception.MediatorException: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
at oracle.tip.mediator.service.transformation.XSLTransformer.getPartDocument (XSLTransformer.java:191)
at oracle.tip.mediator.service.transformation.XSLTransformer.transform (XSLTransformer.java:102)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:103)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:196)
at oracle.tip.mediator.service.DataActionHandler.getNextPayload (DataActionHandler.java:145)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:74)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:53)
at oracle.tip.mediator.service.OneWayActionHandler.oneWayRequestProcess (OneWayActionHandler.java:67)
at oracle.tip.mediator.service.OneWayActionHandler.process (OneWayActionHandler.java:34)
at oracle.tip.mediator.service.ActionProcessor.onMessage (ActionProcessor.java:61)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase (MessageDispatcher.java:103)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase (InitialMessageDispatcher.java:465)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:361)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:254)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch (InitialMessageDispatcher.java:149)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process (MediatorServiceEngine.java:533)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post (MediatorServiceEngine.java:634)
at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:138)
at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:152)
at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:159)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to $Proxy70.post (Unknown Source)
at oracle.integration.platform.blocks.adapter.fw.jca.mdb.AdapterServiceMDB.onMessage (AdapterServiceMDB.java:574)
at oracle.integration.platform.blocks.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage (MessageEndpointImpl.java:295)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:2127)
at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:1719)
at oracle.tip.adapter.file.inbound.ProcessWork.translateAndPublish(ProcessWork.java:677)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:320)
at oracle.integration.platform.blocks.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.integration.platform.blocks.adapter.fw.common.ThreadPool.run(ThreadPool.java:283)
at java.lang.Thread.run(Thread.java:595)
December 5, 2008 14:24:55 oracle.tip.mediator.serviceEngine.MediatorServiceEngine process
GRAVE: update flaw treatment metric DMS
December 5, 2008 14:24:55 oracle.tip.mediator.serviceEngine.MediatorServiceEngine process
GRAVE: Got an exception: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
oracle.tip.mediator.infra.exception.MediatorException: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
at oracle.tip.mediator.service.transformation.XSLTransformer.getPartDocument (XSLTransformer.java:191)
at oracle.tip.mediator.service.transformation.XSLTransformer.transform (XSLTransformer.java:102)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:103)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:196)
at oracle.tip.mediator.service.DataActionHandler.getNextPayload (DataActionHandler.java:145)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:74)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:53)
at oracle.tip.mediator.service.OneWayActionHandler.oneWayRequestProcess (OneWayActionHandler.java:67)
at oracle.tip.mediator.service.OneWayActionHandler.process (OneWayActionHandler.java:34)
at oracle.tip.mediator.service.ActionProcessor.onMessage (ActionProcessor.java:61)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase (MessageDispatcher.java:103)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase (InitialMessageDispatcher.java:465)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:361)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:254)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch (InitialMessageDispatcher.java:149)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process (MediatorServiceEngine.java:533)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post (MediatorServiceEngine.java:634)
at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:138)
at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:152)
at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:159)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to $Proxy70.post (Unknown Source)
at oracle.integration.platform.blocks.adapter.fw.jca.mdb.AdapterServiceMDB.onMessage (AdapterServiceMDB.java:574)
at oracle.integration.platform.blocks.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage (MessageEndpointImpl.java:295)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:2127)
at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:1719)
at oracle.tip.adapter.file.inbound.ProcessWork.translateAndPublish(ProcessWork.java:677)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:320)
at oracle.integration.platform.blocks.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.integration.platform.blocks.adapter.fw.common.ThreadPool.run(ThreadPool.java:283)
at java.lang.Thread.run(Thread.java:595)
December 5, 2008 14:24:55 oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl Journal
GRAVE: JCABinding = > ReadAdapter Service read could not perform the sending of an incoming message to the composite due to: oracle.tip.mediator.infra.exception.MediatorException: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
December 5, 2008 14:24:55 oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl Journal
GRAVE: JCABinding = > read
oracle.fabric.common.FabricInvocationException: oracle.tip.mediator.infra.exception.MediatorException: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process (MediatorServiceEngine.java:599)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.post (MediatorServiceEngine.java:634)
at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:138)
at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:152)
at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:159)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
to $Proxy70.post (Unknown Source)
at oracle.integration.platform.blocks.adapter.fw.jca.mdb.AdapterServiceMDB.onMessage (AdapterServiceMDB.java:574)
at oracle.integration.platform.blocks.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage (MessageEndpointImpl.java:295)
at oracle.tip.adapter.file.inbound.ProcessWork.publishMessage(ProcessWork.java:2127)
at oracle.tip.adapter.file.inbound.ProcessWork.doTranslation(ProcessWork.java:1719)
at oracle.tip.adapter.file.inbound.ProcessWork.translateAndPublish(ProcessWork.java:677)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:320)
at oracle.integration.platform.blocks.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
at oracle.integration.platform.blocks.adapter.fw.common.ThreadPool.run(ThreadPool.java:283)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.tip.mediator.infra.exception.MediatorException: error occurred by transforming the payload!
Please see the load XSL or source. Contact the Oracle Support if error not repairable
at oracle.tip.mediator.service.transformation.XSLTransformer.getPartDocument (XSLTransformer.java:191)
at oracle.tip.mediator.service.transformation.XSLTransformer.transform (XSLTransformer.java:102)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:103)
at oracle.tip.mediator.service.transformation.MediatorTransformationHandler.transform (MediatorTransformationHandler.java:196)
at oracle.tip.mediator.service.DataActionHandler.getNextPayload (DataActionHandler.java:145)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:74)
at oracle.tip.mediator.service.BaseActionHandler.requestProcess (BaseActionHandler.java:53)
at oracle.tip.mediator.service.OneWayActionHandler.oneWayRequestProcess (OneWayActionHandler.java:67)
at oracle.tip.mediator.service.OneWayActionHandler.process (OneWayActionHandler.java:34)
at oracle.tip.mediator.service.ActionProcessor.onMessage (ActionProcessor.java:61)
at oracle.tip.mediator.dispatch.MessageDispatcher.executeCase (MessageDispatcher.java:103)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCase (InitialMessageDispatcher.java:465)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:361)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.processCases (InitialMessageDispatcher.java:254)
at oracle.tip.mediator.dispatch.InitialMessageDispatcher.dispatch (InitialMessageDispatcher.java:149)
at oracle.tip.mediator.serviceEngine.MediatorServiceEngine.process (MediatorServiceEngine.java:533)
... 24 more

December 5, 2008 14:24:55 oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl Journal
WARNING: JCABinding = > ReadonReject reading: the adapter resources 'file' asked a malformed incoming message processing. However, the following Service property has not been set: "rejectedMessageHandlers." Please define and redeploy the module. Will use the default rejection file://jca \Read\rejectedMessages directory at the moment.
December 5, 2008 14:24:55 oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl Journal
WARNING: JCABinding = > ReadonReject reading: Send incoming message invalid to the exception handler:
December 5, 2008 14:24:55 oracle.tip.mediator.common.error.ErrorMessageEnqueuer$ EnqueuerThread run
CRITICAL: Doesn't have a queue error message
javax.jms.TransactionInProgressException: cannot call commit on a JMS session capable XA.
at oracle.j2ee.ra.jms.generic.RAUtils.make(RAUtils.java:595)
at oracle.j2ee.ra.jms.generic.RAUtils.toTransactionInProgressException(RAUtils.java:846)
at oracle.j2ee.ra.jms.generic.RAUtils.toTransactionInProgressException(RAUtils.java:840)
at oracle.j2ee.ra.jms.generic.SessionWrapper.commit(SessionWrapper.java:197)
to oracle.tip.mediator.common.error.ErrorMessageEnqueuer$ EnqueuerThread.run (ErrorMessageEnqueuer.java:187)
at java.lang.Thread.run(Thread.java:595)

I checked the .xsd file and my xml several times and it seems that they are correct. In addition, the .xsl file is also correct.
Does anyone have an idea of what can produce this problem?

Thank you
I was finally able to get my project work. Heidi - you were right, there was a problem with the XSL generated the XSL map editor.
I'm trying to locate if this issue has already been reported, but I'm pointing out here, in case someone else has to face the same.

The generated XSL was as follows:

< xsl: stylesheet version = "1.0".
xmlns:DVM = "[http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue]".
xmlns:bpws = "[http://schemas.xmlsoap.org/ws/2003/03/business-process/]".
xmlns:ns1 = "[http://xmlns.oracle.com/pcbpel/adapter/db/ReadEmps/Read/DB/]".
xmlns:PLT = "[http://schemas.xmlsoap.org/ws/2003/05/partner-link/]".
xmlns:ns0 = "[http://www.w3.org/2001/XMLSchema]."
xmlns:HWF = "[http://xmlns.oracle.com/bpel/workflow/xpath]".
xmlns:XP20 = "[http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20]".
xmlns:xref = "[http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions]".
xmlns:TNS = "[http://xmlns.oracle.com/pcbpel/adapter/file/ReadEmps/Read/Read/]".
xmlns: xsl = "[http://www.w3.org/1999/XSL/Transform]."
xmlns:ORA = "[http://schemas.oracle.com/xpath/extension]".
xmlns: xsi = "[http://www.w3.org/2001/XMLSchema-instance]."
' xmlns:imp1 = ' [www.TargetNameSpace.com/EmpTrack |] ' http://www.targetnamespace.com/EmpTrack] * ' *.
xmlns:top = "[http://xmlns.oracle.com/pcbpel/adapter/db/top/DB]".
xmlns:IDs = "[http://xmlns.oracle.com/bpel/services/IdentityService/xpath]".
xmlns:ORCL = "[http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc]".
xmlns:MHDR = "[http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.GetRequestHeaderExtnFunction]".
exclude-result-prefixes = "xsl plt ns0 ns1 imp1 tns superior dvm APO hwf xp20 Xref ora ID orcl mhdr" >
< xsl: template match = "/" >
< EmployeeTrackingCollection: top >
< xsl: select for each * = "/ imp1:ROWSET / imp1:ROW *" >
< EmployeeTracking: top >
< top: locationId >
< xsl: value-of select = "* imp1:LOCATION_ID *" / >
< / top: locationId >
< top: employeeId >
< xsl: value-of select = "* imp1:EMPLOYEE_ID *" / >
< / top: employeeId >
< employeeX: top >
< xsl: value-of select = "* imp1:EMPLOYEE_X *" / >
< / high: employeeX >
< upper: employeeY >
< xsl: value-of select = "* imp1:EMPLOYEE_Y" * / >
< / top: employeeY >
< / high: EmployeeTracking >
< / xsl: foreach >
< / high: EmployeeTrackingCollection >
< / xsl: template >
< / xsl: stylesheet >

The Xpath expression includes the "imp1:" tag to reference namespace. I tested this XSL and it did not work. However, on the removal of namespace ' imp1: ' the XPath, XSL works fine and I am able to insert into the database. "" Any appropriate driver "does not appear in the newspaper, but all lines of XML are inserted into the database.

Heidi - do you think it is a bug?

Cannot use the native sequence of database to insert data through the DbAdapter

Hello
I use Oracle Fusion Middleware 12.1.3 (selection of pre-designed developer programs for Oracle VM VirtualBox VMs |) Oracle Technology Network). I'm trying to insert data into the Oracle database coming with the device via a DbAdapter. I want to use the native Oracle sequences for primary keys and have configured appropriatelly the DbAdapter. But in execution, I get the following exception:
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-01400: cannot insert NULL into ('SCOTT'. "ORDERS '." (' ' ID ')
If I configure the such DbAdapter that do not use sequences, I get the same exception. I'm missing here?
Kind regards
Nicolas

Reading more carefully the exception, in the log file of the server, not just the display of messages in the console of the em, I could note that the ConnectionFactory configured on the outgoing Dbadapter connection used to access the database was incorrect. He was using JavaDb instead of Oracle that I made a mistake of copying and pasting. Correction of this error has resolved the problem.

Insert data into another database with a script

Hello.
What is the best way to insert data into one database with a script
INSERT INTO BF_PRUEBASMTP.bf_mtp_agr_inscription (ain_agreementid, ain_customerid, ain_paymethodsid, ain_servicemoduleid, referencia)
SELECT AAG. AAG_AGREEMENTID, ACU. ACU_CUSTOMERID, 2, 2, ins. NUMERO_REFERENCIA
OF BF_PRUEBASMTP.bf_mtp_agr_biller ABI
JOIN IN-HOUSE
BF_PRUEBASMTP. BF_MTP_AGR_AGREEMENT AAG ON ABI. ABI_BILLERID = AAG. AAG_BILLERID
INNER JOIN 'CLIENTEUNICO. ALMUERZO" ins
ON THE AAG. AAG_AGREEMENTID = ins. CONVENIOID
INNER JOIN BF_PRUEBASMTP.bf_mtp_agr_customer ACU
ON ACU.acu_typedocumentid = ins. TIPO_DOCUMENTO
AND ACU.acu_numberid = ins. NUMERO_DOCUMENTO;
CLIENTEUNICO. INSCRIPCIONES = SELECT * DE INSCRIPCIONES - to a DIFFERENT DATABASE

Thank you very much.

2931095 wrote:

If I don't have permissions to create a database link. Is there another way to do this?

Thank you.

link to database IS the method by which an Oracle database accesses to a different database.

If you are the ADMINISTRATOR, you should have permission.

If you are not the ADMINISTRATOR, you should not have permission and need to talk to the ADMINISTRATOR that is allowed.

Detail table data control not insert data

Hello
I use JDev 11.1.2.4 and fusion web application, I have 2 main table and, when I run APP module and insert data in the table in detail its registered successfully, but when I drag the VO of the data control to af:form some data and other will be null.
Any suggestion?
Concerning

Finally I found the solution

https://forums.Oracle.com/message/10493807

RESTful service cannot insert data using PL/SQL.

Hi all
Spin: stand-alone 2.01 AL on OEL 4.8 in box a. VM
Database Oracle 10.2.0.4 with Apex 4.2.0.00.27 on OEL4.8 in the VM B box.

Measure of oracle.example.hr performed without problem Restful services.

Cannot insert data using AL 2.0.1 but works on 1.1.4 AL.
who uses the following table (under scheme: scott):

 
create table json_demo ( title varchar2(20), description varchar2(1000) ); 
grant all on json_demo to apex_public_user;

and procedure (scott diagram) below:

CREATE OR REPLACE
PROCEDURE post(
    p_url     IN VARCHAR2,
    p_message IN VARCHAR2,
    p_response OUT VARCHAR2)
IS
  l_end_loop BOOLEAN := false;
  l_http_req utl_http.req;
  l_http_resp utl_http.resp;
  l_buffer CLOB;
  l_data       VARCHAR2(20000);  
  C_USER_AGENT CONSTANT VARCHAR2(4000) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)';
BEGIN
  -- source: http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
  -- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
  -- rather than just returning the text of the error page.
  utl_http.set_response_error_check(false);
  -- Begin the post request
  l_http_req := utl_http.begin_request (p_url, 'POST', utl_http.HTTP_VERSION_1_1);
  -- Set the HTTP request headers
  utl_http.set_header(l_http_req, 'User-Agent', C_USER_AGENT);
  utl_http.set_header(l_http_req, 'content-type', 'application/json;charset=UTF-8');
  utl_http.set_header(l_http_req, 'content-length', LENGTH(p_message));
  -- Write the data to the body of the HTTP request
  utl_http.write_text(l_http_req, p_message);
  -- Process the request and get the response.
  l_http_resp := utl_http.get_response (l_http_req);
  dbms_output.put_line ('status code: ' || l_http_resp.status_code);
  dbms_output.put_line ('reason phrase: ' || l_http_resp.reason_phrase);
  LOOP
    EXIT
  WHEN l_end_loop;
    BEGIN
      utl_http.read_line(l_http_resp, l_buffer, true);
      IF(l_buffer IS NOT NULL AND (LENGTH(l_buffer)>0)) THEN
        l_data    := l_data||l_buffer;
      END IF;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
      l_end_loop := true;
    END;
  END LOOP;
  dbms_output.put_line(l_data);
  p_response:= l_data;
  -- Look for client-side error and report it.
  IF (l_http_resp.status_code >= 400) AND (l_http_resp.status_code <= 499) THEN
    dbms_output.put_line('Check the URL.');
    utl_http.end_response(l_http_resp);
    -- Look for server-side error and report it.
  elsif (l_http_resp.status_code >= 500) AND (l_http_resp.status_code <= 599) THEN
    dbms_output.put_line('Check if the Web site is up.');
    utl_http.end_response(l_http_resp);
    RETURN;
  END IF;
  utl_http.end_response (l_http_resp);
EXCEPTION
WHEN OTHERS THEN
  dbms_output.put_line (sqlerrm);
  raise;
END;

and execution in sqldeveloper 3.2.20.09 when it connects directly to box B as scott:

 
SET serveroutput ON
DECLARE
  l_url      VARCHAR2(200)   :='http://MY_IP:8585/apex/demo';
  l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
  l_response VARCHAR2(30000);
BEGIN
  post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;

leading to:

 
anonymous block completed 
status code: 200
reason phrase: OK 
with data inserted.

Installation using 2.0.1

   Workspace : wsdemo
 RESTful Service Module:  demo/
          URI Template:      test
                Method:  POST
           Source Type:  PL/SQL

and execution in sqldeveloper 3.2.20.09 when it connects directly to box B as scott:

 
SET serveroutput ON
DECLARE
  l_url      VARCHAR2(200)   :='http://MY_IP:8585//apex/wsdemo/demo/test';
  l_json     VARCHAR2(20000) := '{"title":"thetitle","description":"thedescription"}';
  l_response VARCHAR2(30000);
BEGIN
  post( p_url => l_url, p_message =>l_json, p_response => l_response);
END;

leading to:

 
status code: 500 
reason phrase: Internal Server Error 

Listener's log: 
Request Path passes syntax validation
Mapping request to database pool: PoolMap [_poolName=apex, _regex=null, _workspaceIdentifier=WSDEMO, _failed=false, _lastUpdate=1364313600000, _template=/wsdemo/, _type=BASE_PATH]
Applied database connection info
Attempting to process with PL/SQL Gateway
Not processed as PL/SQL Gateway request
Attempting to process as a RESTful Service
demo/test matches: demo/test score: 0
Choosing: oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as current candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true]
Determining if request can be dispatched as a Tenanted RESTful Service
Request path has one path segment, continuing processing
Tenant Principal already established, cannot dispatch
Chose oracle.dbtools.rt.resource.templates.jdbc.JDBCResourceTemplateDispatcher as the final candidate with score: Score [handle=JDBCURITemplate [scopeId=null, templateId=2648625079503782|2797815111031405, uriTemplate=demo/test], score=0, scope=SecurityConfig [constraint=none, realm=NONE, logonConfig=LogonConfig [logonForm=null, logonFailed=null]], originsAllowed=[], corsEnabled=true] for: POST demo/test
demo/test is a public resource
Using generator: oracle.dbtools.rt.plsql.AnonymousBlockGenerator
Performing JDBC request as: SCOTT
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: Error occurred during execution of: [CALL, begin
 insert into scott.json_demo values(/*in:title*/?,/*in:description*/?);
end;, [title, in, class oracle.dbtools.common.stmt.UnknownParameterType], [description, in, class oracle.dbtools.common.stmt.UnknownParameterType]]with values: [thetitle, thedescription]
Mar 28, 2013 1:29:28 PM oracle.dbtools.common.jdbc.JDBCCallImpl execute
INFO: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id

java.sql.SQLException: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id

        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
        at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
        at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
        at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
        at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
        at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
        at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:205)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1043)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1336)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3713)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4755)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1378)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
        at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
        at oracle.ucp.jdbc.proxy.CallableStatementProxyFactory.invoke(CallableStatementProxyFactory.java:101)
        at $Proxy46.execute(Unknown Source)
        at oracle.dbtools.common.jdbc.JDBCCallImpl.execute(JDBCCallImpl.java:44)
        at oracle.dbtools.rt.plsql.AnonymousBlockGenerator.generate(AnonymousBlockGenerator.java:176)
        at oracle.dbtools.rt.resource.templates.v2.ResourceTemplatesDispatcher$HttpResourceGenerator.response(ResourceTemplatesDispatcher.java:309)
        at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:88)
        at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:412)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:162)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.doFilter(ServletAdapter.java:1059)
        at com.sun.grizzly.http.servlet.ServletAdapter$FilterChainImpl.invokeFilterChain(ServletAdapter.java:999)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)
        at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:65)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
        at java.lang.Thread.run(Thread.java:662)
Error during evaluation of resource template: ORA-06550: line 1, column 6:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare exit for goto if loop mod null pragma
   raise return select update while with <an identifier>
   <a double-quoted delimited-identifier> <a bind variable> <<
   close current delete fetch lock insert open rollback
   savepoint set sql execute commit forall merge pipe
The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

   begin case declare end exception exit for goto if loop mod
   null pragma raise return select update while with
   <an identifier> <a double-quoted delimited-id

Please notify.
Concerning
Zack

Zack.L wrote:
Hi Andy,.

Sorry, I forgot to post the Source that is used by the AL1.1.4 and the AL2.0.1.

Source
begin
insert into scott.json_demo values(:title,:description);
end;
It is a failure during insertion?
Yes, he failed in the insert using AL2.0.1.

If the above statement produces the following error message:

The symbol "" was ignored.
ORA-06550: line 2, column 74:
PLS-00103: Encountered the symbol "" when expecting one of the following:

begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with


That gives me to think that a character is not printable (notice how there is anything between the quotation marks - "") worked his way in your PL/SQL Manager. Note how the error is reported to correspond to a column 74 on line 2, line 2 of the block above has 58 characters, so a pure assumption somehow, there is extra space on line 2, which confuses the PL/SQL compiler, I suggest retype PL/SQL Manager manually and see if that solves the problem.

 
            
            
		     SOA calling a MS SQL table to insert data. 
			 Hello
I configured a XA driver to insert data into the MS SQL Server table. When I execute the stream with a SOAP user interface. I was able to insert the data from MS SQL table. But in the end, the transaction is rolled back.




I would ask you
< soapenv:Envelope xmlns:soapenv = 'http://schemas.xmlsoap.org/soap/envelope/' xmlns:mvn = "http://xmlns.oracle.com/MVNEIDM/MVNESelfRegistration/MVNESelfRegistration" >
< soapenv:Header / >
< soapenv:Body >
< mvn:MVNESelfRegistrationRequest >
< mvn:subscriberId > 12345 < / mvn:subscriberId >
< mvn:Keyword > 456 < / mvn:Keyword >
< mvn:completionDt > 2013-02-06 T 16: 24:06.952 < / mvn:completionDt >
< mvn:expirationdt > 2013-02-06 T 16: 24:06.952 < / mvn:expirationdt >
< / mvn:MVNESelfRegistrationRequest >
< / soapenv:Body >
< / soapenv:Envelope >




Erros on SOAP UI are:


< env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
< env:Header / >
< env:Body >
< env:Fault >
env:Server < faultcode > < / faultcode >
incorrect object name < faultstring > [FMWGEN] [SQLServer JDBC Driver] [SQL Server] ' dbo. SelfRegistration'. < / faultstring >
< faultactor / >
< detail >
< exception / >
< / details >
< / env:Fault >
< / env:Body >
< / env:Envelope >


The managed server log the error is




Form weblogic server: -.
Error committing transaction:; nested exception is: Exception [EclipseLink-4002] (Eclipse - 2.1.3.v20110304 persistence Services - r9073): org.eclipse.persistence.exceptions.DatabaseException internal Exception: weblogic.jdbc.sqlserverbase.ddc: invalid object name [FMWGEN] [SQLServer JDBC Driver] [SQL Server] ' dbo. SelfRegistration'. Error code: 208




The process ends with an error, but why he is rolling abck the transaction at the end. The table of the object was existing in the database and I traced the table to insert the data from the input variable reception to invoke the input variable. BPEL Instance he executed until the end, but in the end, the transaction is rolled back.


Thank you
Newcomer Raja			 Invalid object name ' dbo. SelfRegistration'
I'm assuming you can see a SelfRegistration table in your database... So, I guess that BOD is not the name of the diagram on the right...
		    
            
            
		     Extract data from Oracle into excel file 
			 Hello


I have a requirement where in I need to extract data from Oracle into excel file and the worksheet excel name should be 'given '.
for example. Excel 'AR Data_DDMMYY' file name and the name of the "Data" sheet excel


I used the UTL_FILE API to extract the data delimited by tabs that you can open in excel, but it's not exactly an excel file as the name of the worksheet is the same as the name of the file.


I tried to use utl_file.fcopy and frename.


Is it possible to do it using PLSQL?


Select * from version of v$.


Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
"CORE     10.2.0.5.0     Production"
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
Example Code:


declare
cursor c is
select * from scott.emp;
v varchar2(100);
f utl_file.file_type;

file_name varchar2(100) := 'AR Data.xls';
dir varchar2(50) := 'CESDIR191710';

--select * from dba_directories

begin


f := utl_file.fopen(dir, file_name, 'W');

v := 'EMPNO'||chr(9)||'ENAME'||chr(9)||'JOB'||chr(9)||'SAL'||chr(9)||'HIREDATE'||chr(9)||'DEPTNO';
utl_file.put_line(f, v);

for i in c
loop

v := i.empno||chr(9)||i.ename||chr(9)||i.job||chr(9)||i.sal||chr(9)||i.hiredate||chr(9)||i.deptno;
utl_file.put_line(f, v);

end loop;
utl_file.fclose(f);

--utl_file.frename(dir, file_name, dir, replace(file_name, '.xls', '_')||to_char(sysdate, 'MMDDYY')||'.xls', false);
utl_file.fcopy(dir, file_name, dir, replace(file_name, '.xls', '_')||to_char(sysdate, 'MMDDYY')||'.xls');

end;
Thank you
Imran			 Hello
I tried to change the .xlsx to .xls and it gives a note at the opening of the file "the file you are trying to open, abc.xls, is in a different format that it is specified by the file extension. Check that the file is not corrupted and precedes from a trusted source before you open the file. Do you want to open it now? »
When you rename the file does not solve your problem.
Anton Scheffer package generates a file in format xlsx Office 2010. When rename you it with the .xls extension, then Office 2010 will give you the warning that the file format does not match the extension.
but the requirement has to generate excel 2003 file.
The xml_spreadsheet package writes a format that was introduced with Office 2003, but you must use .xml as extension in other Office 2010 will give you the same caveat.
To write the real xls version (binary), you can use Apache POI. You will need to import Java classes in your db and write a PL/SQL wrapper. Or you can use one of the options above, writing the output to a windows server and then use Excel to open and save in the required format.
You must decide whether it is easier to write the binary xls format or to convince the customer to accept other formats that can be opened with Excel.
Concerning
Marcus

 
		 
          Maybe you are looking for 
           
            
		     Win XP error 0 x 80246008 - specific error service 2147024891 
			 I have XP Home edition with service pack 3. When I try to download the updates I get error 0 x 80246008. When I go to Control Panel Services and try to start BITS, I get "Windows cannot start BITS on the local computer. For non-Microsoft service, con 
		    
            
		     Where's my contacts in windows live mail? 
			 Somehow, I went from email windows to windows live mail but my contacts did not follow.  How to bring back my contacts? 
		    
            
		     Help troubleshooting Stop 0 X 77 
			 I have a computer that has a problem with an error Stop 0 x 77 of these last. It runs Windows XP Professional version 2002 Service Pack 3. The computer is a Dell Optiplex 760, core 2 duo E8400 with 2 GB of RAM. It has 2 internal drives, a 250 GB prim 
		    
            
		     Could not get the email, get the error number: 0x800CCC0E, failed connection 
			 Receive a msg of error Outlook Express (XP) as shown.  Just started recently. Must reboot to fix, then it repeats. Any difficulty? Receiving the msg to Outlook Express error as follows: failed to connect to the server. Account: 'ted.tedramsdell', ser 
		    
            
		     HP mediasmart smartmenu has stopped working 
			 When I connect to the computer, I get the hp mediasmart smartmenu message has stopped working!  is there a solution for this problem?