Insertion of FLV videos which allow students to start and stop any where

Similar Questions

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• When you watch videos it will start and stop.

  When you watch videos it will start and stop. What are the causes it to do this? I was wondering.

  sdh1975 wrote:

  When you watch videos it will start and stop. What are the causes it to do this? I was wondering.

  Hello

  Are you you talk online or offline? If online, the connection speed can be not fast enough.

  Kind regards.

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• I have problem watching video on youtube it will start and play for 10 sec and stop

  When you try to watch a video on youtube or another network, it will start to play for about 10 to 45 sec and stop to let to memory buffer for hours custom go no where

  Click on the gear in the top right, symbol

  Point to security, and what is checked, uncheck the box
  Then click on internet options,
  Go to the Advanced section and check the box at the top of the page,
  Use rendering software instead of gpu rendering, apply and OK.
  Close and open a new window of ie9,
  Also make sure that your not using the 64-bit version of ie9, they are clearly identified and 64-bit operating system has two versions.

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• When I stream video on my laptop it stutters and stops, I have tried everything I can think of, any suggestons?

  Sometimes I get a notice that cell share the I.P. number with another computer on the net work but I changed the I.P. number nothing works. I'm stumped on this one.

  Hey Stan,

  1. What is the operating system installed on your computer?

  2. this happens with all sites or with any specific Web site?

  3. which web browser you are using?

  4 have had any changes made to the computer before the show?

  If you use Internet Explorer, please follow the steps from the link and check that it works very well.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294/en-us

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• videos start and stop every few seconds

  Why the videos load every few seconds?  I can't view a whole video without 4 or 5 second breaks every 4 or 5 seconds.

  Hello

  You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Once completed, open IE and click on the Adobe link yet to invite the reinstalling of the component ActiveX - once this is completed, reboot the laptop.

  Kind regards

  DP - K

  

• The wireless profiles of Windows 8, which exists but can not be found any where... including in the netsh command

  Why can I not see or delete Active profiles?  I started to get error messages saying: unable to connect to the profile 'NAME '.  When I try to remove the profile from the command prompt, it shows that those that work, but I have two profiles that show and error to connect but have no way to remove them from the system.  I have removed connections wireless for these profiles and have reconfigured all of them, but they still keep coming back.

  Hi GordSmyth,

  I suggest you follow these steps to remove the network unwanted wireless.

  a. click on the network icon in the system tray and then you will be able to see the wireless connections.

  b. right-click on the network, and then select Forget this network.

  Up to Windows 7, connected wireless networks were previously recorded and searchable via the preferred wireless network list, but this feature seems to have been deleted in Windows 8. Microsoft has removed as a smart feature has been added, which handles wireless profiles by how you connect to him, and while we can always watch yet natively wireless network profiles in Windows 8:

  Manage wireless network profiles

  http://Windows.Microsoft.com/en-us/Windows-8/manage-wireless-network-profiles

  Let us know if you have any additional questions.

• Re: Start and stop the scene/video button

  I need help to fix my departure and switch to stop.  It will start the video scene, but it will not stop if I click on the Start button. Please correct my code.  Thank you.

  Process.Visible = false;

  Cycles.Visible = false;

  Stop();

  function playMovie(event:MouseEvent):void

  {

  Play();

  }

  startButton.addEventListener (MouseEvent.CLICK, playMovie);

  var paused: Boolean = false;

  function myPauseFunction (): void {}

  {if (Paused)}

  Play();

  paused = false;

  }

  else {}

  Stop();

  paused = true;

  }

  change:

  function pauseMovie (): void {}

  {if (Paused)}

  Play();

  }

  else {}

  Stop();

  }

  pause =! suspended;

  }

  TO:

  function pauseMovie (e:MouseEvent): void {}

  {if (Paused)}

  Play();

  }

  else {}

  Stop();

  }

  pause =! suspended;

  }

• AS3 video start and stop the question.

  Hello

  I am new to AS3 and I'm trying to figure out how to stop a clip to play on mouse click. For now, I created a movieclip that plays when the user clicks on it, but now I want to be able to stop the movieclip if clicked again.
  At the moment, I have the following code:

  Stop();
  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  bigTree_mc.play ();
  }

  The tree animation plays very well, but I want to be able to stop it if the user click on it again.

  Any help would be appreciated!

  Thank you!

  Try...

  Stop();

  var isPlaying:Boolean = false;

  bigTree_mc.addEventListener (MouseEvent.CLICK, onClickplayAnimation);

  function onClickplayAnimation(event:MouseEvent):void
  {
  {if (isPlaying)}

  bigTree_mc.stop ();

  } else {}

  bigTree_mc.play ();
  }

  isPlaying =! isPlaying;

  }

• FLV video for the web?

  Hi all

  I have big problem in movie flv. Our client is a manufacturing Watch & provide high quality flv videos (inner workings of the watch).

  I don't want to put the video in public Web site such as youtube, googlevideo etc.

  How add my video Web site also, I attached a tour reference image for video container I want to look and feel like this.

  Please help me

  Concerning

  Maury

  

  Hello Maury,

  to insert an flv video, did "" asking you for the next steps. In order, you can control this, I'll try to describe in detail from the beginning (translated from my German DW):

  Create a new subdirectory (that's for this test, you can insert it into an existing file of DW naturally).
  Create a new html/php file.
  Work in designMode--> the Insert Flash video.
  Search / navigate---> yourFLV.flv
  : Skin Halo 3 (w. 280) (it's my choice here)
  width 640 (this is my choice)
  height 480 (this is my choice)
  You can click in all the boxes.

  ---> Away with all these below (products of DW) files to your server.

  Best you have a look with WIN-Explorer in your directory, to see all files DW created in your home directory and don't forget one:

  YourFlv.flv
  YourFlv.htm (or YourFlv.php)
  Clear_Skin_1.swf (my choice)
  Which

  You can see your file in preview (when the file is ok), cause in your directory/DW-disk hard-all these files exist.

  Hans-Günter

• How can I control a FLV video using exhibit main bar (not FLV skin)?

  I need to have the ability to play/pause a FLV video on a slide with the bar of main games.  Research showed me that in previous versions, there is a checkbox "synchronize with project" which allowed this.  I don't find this in version 8.  Is there another way to do this?

  Hello

  Welcome to the Adobe Forums

  Try to insert the video like video instead of event video synchronized slides,

  Then down below it will be an option to distribute video through the slides and you can select Slide n to n (where n is the number of slide).

  Hope that this will serve as your need.

  Concerning

  Himanshu

• DW CS4: FLV video is not displayed

  I use Dreamweaver CS4 and I'm putting FLV video on a page. I used Insert-> media-> FLV... and filled everything has asked that - I watched the video (which is in my root directory), I chose a skin, and I input the width and height values. I downloaded the video on the server, I downloaded the folder newly created Scripts and its content on the server and, of course, I downloaded the page. I also downloaded who and Clear_Skin_3.swf in the folder root. But the video does not appear.

  Can someone tell me what I'm doing wrong here? It is a standard .flv video for Flash 8 and higher and plays very well in a variety of speakers, including Adobe Media Player c. 1.8.

  Here is the page:

  http://StopRightNow.NET/index.htm

  (The video should display in the large white box to the left of the page, in front of the body copy)

  Thanks in advance for your help.

  Clear_Skin_1.swf

  (http://stoprightnow.net/Clear_Skin_1.swf)

  This link is taken from your code in the page.  But the file is not there.  Your FLV is not displayed until the browser can find this file - a download you?