Inspiron N0710 THAT there IS NO AUDIO OUTPUT INSTALLED

Windows 7 Home Premium operating system, system worked very well, when I check my sound device manager is very good. When I check sound it tells me that no Audio output is installed? I've updated my Dell online here and the system check found no problem. I looked online and found a lot of questions however, I'm not too up-to-date on my technical skills and found more overwhelming. Thank you

Hello.

> Use Windows system restore. Type system restore in her start > search. Select a date from before that the problem started.

or

> Install a new copy of your driver audio Realtek (link). Installation instructions are on the page of the driver. To download, click on 'Download File'.

Tags: Dell Laptop

Similar Questions

  • my laptop says there is no audio output device is installed

    Sound

    my phone says there is no audio output device is installed, does not uninstall anyhting?

    If it was my PC, I would like to reinstall the device driver of sound card on the web site of manufacturer support.

  • There is no audio device installed in Windows 7

    Recently, after that my father could not turn on the protector of windows he was afraid he had a virus on our computer. It turns out that it was simply because we are under windows 7. MSE runs under windows seven. It does not recognize the name of the driver removed from the computer and audio. After that I realized why the Defender turned we tried reinstalling the audio driver with mixed success. There is no sound on our computer and the program appears in the Manager for devices with a warning triangle. When I open the program the master volume down without any apparent way to raise it. By clicking on the button mute or dragging the roller on the meter is not do. The audio store is no help and the computer repeatedly says there is no audio devices installed by clicking on the when I try to adjust the system volume or manage audio devices via the control panel. We have a Dell E6540 and our CODEC IDT audio driver.

    Original title: Audio problems

    I found a solution to the problem. The compiter was pluged into a hub. After performing a clean boot, I uninstalled all audio ports via the hub. After doing this, I was able to install the driver. Windows Defender has not executed because MSE is the security system by default on windows 7.

  • Update Windows again me that there are 11 important to install updates. It fails with the error 80070490, Code and Code 80073712.

    Original title: update Windows problem on Vista 64-bit

    My Windows Update repeat me that there are 11 important to install updates. It fails whenever I have try running with 80070490, Code and Code 80073712 error.

    I tried the Windows analysis tool, the difficulty it tool Microsoft and the web site Microsoft Fix It I have have also run a registry cleaner and that he would follow the instructions of Microsoft to solve the problem of Windows Update by editing the registry, but I get 'Access denied' when ordering fast, even though I checked all permissions.

    The updates are:

    Update for Windows Vista for x 64-based systems (KB972145)
    Update for Windows Vista for x 64-based systems (KB2633952)
    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2572075)
    Update security for Windows Vista for x 64-based systems (KB2564958)
    Update for Windows Vista for x 64-based systems (KB970430)
    Update security for Windows Vista for x 64-based systems (KB2378111)
    Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
    Update for Windows Vista for x 64-based systems (KB2345886)
    Update security for Windows Vista for x 64-based systems (KB967723)
    A security update for .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 for x 64 systems (KB2518866)
    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2633874)

    I realize that these are not critical updates, but am concerned that, if there is a problem with the update, it will not refresh the critical updates either.

    Any help would be greatly appreciated. Thank you.

    Etherlass

    Hello again,

    Thought I would let you know that I've finally sorted this! :)

    In another forum I read a post from someone who had a similar problem and solved it by uninstalling the "failures" updated, restart the PC and then re-run the update. It worked! It had not occurred to me to try what I've assumed that 'impossible' meant that they had not installed at all, not that they didn't had simply not installed correctly and must have become corrupt.

    I hope this will help someone else who has the same problem, I've had!

    Best wishes

    Etherlass

  • I reinstalled windows xp.sound and audio devices say there is no audio devices installed.

    Device Manager displays multimedia audio controller, sm bus controller and video controller with yellow? and under properties all say device not configured properly.i I'd appreciate any help, thank you

    Hello clarksdad,

    It seems that you have not installed all the drivers after your new installation.

    Try to install the drivers for chipsets motherboard from the CD driver provided by the manufacturer/supplier of your PC.

    And then you continue with the installation of drivers VGA and Audio.

    For the most part, all these drivers come packaged with the CD provided by the manufacturer/supplier of your PC.

    Thank you and best regards.
    Roger

  • Why I get that there are not enough licenses installed to perform the operation?

    I have three servers that I fight with the chance to talk to an hp 1510i, but it's a different test. I have rebuilt the three servers 2 and now when I try to add them to the virtual Center 2.5.0 I get "There not enough licenses installed to perform the operation." These machines were on Virtual Centre before I rebuilt the. I don't understand why licensing is not be happy. Can someone give me advice on how to fix?

    Let me know if you need more information.

    Thank you

    Ken

    Your image shows 0 licenses for virtual center agent, that's why you can't add.  Check your hosts and see which servers are using what licenses.  A reboot must have cleared out the number of licenses, which must have caused the hosts re - synchronize the license info, which they periodically anyway.  This may take some time, depending on your host is on the refresh interval.  Make sure you do not have more than 6 ESX host, because that's what you are licensed.  If this is not correct, check your license file is not the correct information.  You can always go online to the portal of licenses and generate a new.

    -KjB

  • Sound device not working-no audio output installed

    I've tried everything to fix this, similarly it has no speaker in the reading options, please help...

    Hello

    have you tried reinstalling the audio device?
  • No sound video and game not listed in the Manager of devic not vista audio output installed

    Sound has been one after some updates has exploded.  already updated deleter - 94

    Hi WakeUpPlanet,

    You can read the following article and try the steps and see if it helps.

    No sound in Windows

    Hope this information is useful.

  • No audio output device installed - after installing windows 7

    I installed a copy of Windows 7. Clean install, not an upgrade and not a copy of the beta.
    The computer is now telling me that there is "no audio output device is installed".
    the sound was working fine before the installation of Windows 7.

    I looked ofr updates for the drivers, but I can't find them.
    The motherboard is an ASUS KBV SE sound card w\ luxury.

    Thanks for your help

    Any help to fix this problem would be appreciated.

    Can you check it out here:

    Start > Control Panel > hardware and sounds > sounds > Sound

    Under "playback" tab is "Speakers" selected as "default" device?

  • No audio device installed in Acer Travel mate

    Acer travel mate 4060 * upgraded to 2 GB of ram and windows 7 32-bit Home premiun has just been recovered from an accident.

    I send you this message from the same computer. My speakers do not work. However when I connect an external speaker with USB connection, the sound works perfectly well. I can watch videos and listen to music. I checked and it seems that there is no audio devices installed. I urgently need help from the community that will be appreciated MUC. Thank you.

    Hello DharmaSD,

    You have a Realtek audio device.

    Have you tried to install:

    1 - the driver Acer (Vista). For compatibility with Windows 7, read the file readme.txt or file.inf

    2 - the driver Realtek(audio AC 97 or HD codecs)

  • Satellite U300-11V - there is sometimes no audio output

    I need help with my laptop Satellite U300-11v,

    I was faced with the Audio device driver problem, sometimes there is no audio output, and then back after a reboot or put to sleep the laptop, its been like a movement of the audio device. where he sometimes lacks the driver, could you give me a hint on this problem?

    I had downloaded the latest version of the driver and installed but remains in the same State.

    Hello!

    What operating system do you use?
    Using the preinstalled operating system or another version?

    It's not easy to say which is the reason why, but make sure that you have installed the latest SP for your operating system and all updates. You can check this by using the Windows Update.

    In addition, I would recommend updating BIOS. You can find it on the Toshiba site.

    Good bye

  • My computer said that there a configuartion problem audio. Help!

    My computer said that there a problem audio configuartion, Ive a re-intsalled itunes and quicktime. Ive been in the part of Device Manager and he said nothings wrong. Ive restared my computer about 4 times now, but it always happens. And it won't play songs off of youtube. What can I do? I don't want to go and get it fixed because it costs money. Help!

    My computer said that there a problem audio configuartion, Ive a re-intsalled itunes and quicktime. Ive been in the part of Device Manager and he said nothings wrong. Ive restared my computer about 4 times now, but it always happens. And it won't play songs off of youtube. What can I do? I don't want to go and get it fixed because it costs money. Help!

    Click HERE to download and run the Microsoft Fix It. AutoCorrect is designed to solve the problems of sound. If the first problem it solves the problem run the other by clicking HERE.

  • "No Audio output device is installed" on Portege M600

    Hi all

    I had this problem. Today in the afternoon, I was working with my M600 while listening to music. Suddenly, there's like a voice of vibrations... as "zzzz" voice. I was surprissed and decided to cut my music player (I use winamp) and continued complete my work. But, whenever I did by clicking on, this noise appeared with 'click' sound. So, I decided to turn off the PC.

    But now, I surprised because when I turn on my PC, there is "No Audio output device is installed" msg with the sign of the Red Cross on my speakers. I do not anything for the sound before. I have not installed anything. I have day my anti-virus, but that's all.
    This is not the first time happened. I had - a little - this problems twice but it was because I had windows update and I solved it by restoring the system.

    I did system restore, but it still won't work. I really need a help, since sound is so important to me!

    Have idea what had happened and how to handle this?

    Thank you in advance.

    Putri

    Have you tried to install a new sound card driver?
    You can find this driver on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com

    Of course, it could also be a hardware problem with your motherboard and/or the sound chip but try first to update the driver.

    The sounds you describe could also be a HARD drive problem.
    Look in the event viewer for errors.

  • System device of Base dv2046tu & Audio output device drivers

    I installed Windows 7 Ultimate on my laptop model dv2046tu. Since it shows that the Base system device drivers and drivers of Audio output devices are not Installed.There is no audio output.

    Need help to fix the problem... Help, please...

    Hello:

    See if the Vista audio driver works for you...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-49193-1&cc=us&DLC=en&LC=en&OS=2093&product=3252195&sw_lang=

    Need this driver base system device...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-51807-1&cc=us&DLC=en&LC=en&OS=2093&product=3252195&sw_lang=

  • Xperia Z3 radio does not work - no audio output

    When I plug in my headphones, there is no audio output of the FM radio. Walkman app works very well if it isn't making or headphones. The FM app indicates that the radio is on, but there is no sound. I really want to factory reset... is there another way of difficulty? Thank you.

    Disable google Ok from any screen, which should solve your problem.

    @taz_mw

Maybe you are looking for

  • I've known idea what my password is.

    I try to send a few photos, and default thunderbird which I never used. I know what my gmail password, but that won't let me through Thunderbird.

  • Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

    I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some peo

  • How can I remove Content Analysis Manager

    As the title says, how to remove the handler content analysis. I want to "delete", not just turn it off.

  • Video card update on the s5-1414 beep problem

    Hello, I inserted an Asus GT610-sl-1gd3-L video card in the PCI slot, but when I turn on the machine I get beeps and the GET no video on the monitor.  It's a whole new card.  I leave the care and it is eaten in fine. I tried to connect the dvi on the

  • Prevent the reset to the Initial Angle encoder

    Hello I currently have an enoder connected to a meter entry on my data acquisition card.  For my approach, I need the ability to start/stop the task to read the encoder.  My problem is that whenever I restart my task, the encoder is reduced to zero (