Tecra M2: Vertical lines appeared and cannot go beyond the Toshiba screen

I was watching a movie on DVD WIN and froze my TECRA M2 I restarted, I noticed blue vertical lines on the windows on the screen, then the loading screen went white, I restarted the pc and it Gauthier go beyond screen black screen of toshiba. Some people told me that it is the other HDD VGA. What do you think?

Hello

For me, it certainly looks like the graphics card failure!
It's really bad, because for the most part to the whole motherboard must be replaced! :(
But to be 100% sure the diagnostic test is necessary.

I think you should contact the ASP in your country. Guys to explain the situation and ask for clarification.

Maybe your warranty is valid? In this case all replacements would be FRO free!
Usually the guarantee must be valid for 24 months if you have saved this notebook on the Toshiba page.

concerning

Tags: Toshiba

Similar Questions

  • I was invited to run HP on diagnosis of line on my laptop which is under XP SP3. Since that time, a purple vertical line appeared about a third through the screen & moved the desktop icons. I can move the icons, but the line remains.

    I tried all the usual 'household' and the system restore, but this does not solve the problem.

    It is unlikely that a) HP online diagnosis has caused the error. and (b) that it is a software problem. However, because I don't know what made the diagnosis online and why you did, start with the easy things. Download the video driver for your laptop from the HP website and reinstall. If this fixes things, very well. If this isn't the case, it is probably a hardware failure on your video screen of chip and/or laptop. This isn't something you can fix yourself then call HP technical support. MS - MVP - Elephant Boy computers - don't panic!

  • Lost Windows Vista logon password and cannot go beyond the windows login screen.

    I don't have a password to logon to start windows vista.  It is disc did not use in the event that the connection has been lost.  I tried to reload Windows XP from a cold start, but it is said that it does not find the hard drive.  The system disks were inadvertently discarded.  Is there a way to overcome the opening of the window.  This machine was a gift and the recipient could not use it.  It's a Sony Vaio VGN - NR100E SERIES.  Any help would be greatly appreciated.

    Thank you.

    Password recovery:

    http://support.Microsoft.com/default.aspx/KB/189126

    "Microsoft's strategy concerning lost or forgotten passwords"

    Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

    There are 3 programs of recovery of password part available on the Net, if you do a search.

    Use 3 programs of third parties at your own risk.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

    Sony Vaio support at the link above.

    Getting Vista:

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    You can also make recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are in service again.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    See you soon. Mick Murphy - Microsoft partner

  • New SSD - cannot go beyond the login screen.

    New SSD put in place successfully in the MacBook Pro (mid 2010) 10.6.8 OS. Cloned SSD as boot drive, but do not yet installed inside the case.  I used this drive with success for a few days.

    Then yesterday with finals and Firefox running, Firefox has suddenly closed and MBP had only limited functionality.  I tried to reopen Firefox, but the error message said it was already open.  I tried to open 'Force Close' to see if this was true and maybe close it there before to continue, but when I click on the Apple, I got a blue screen, then my normal screen, with icons to come 10 seconds later.  After trying many other things, I had to make a difficult stop (by holding down the power button).

    I rebooted, entered my password at sign-in, but then, instead of proceeding to my normal screen with background, icons, etc, I'm a blue screen which finally rolled back to my login screen.  Then, I entered my password (it IS correct) and the same process happened (repeated 10 times just to be complete).

    I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

    Don't know what to do now.

    keysguy9 wrote:

    I did NOT use the function 'Trim', which I read it, but don't know what it does or how to start it, or it could solve my problem.

    Don't know what to do now.

    TRIM will not solve your problem.

    With Snow Leopard, you may need to reinstall the version of this OS supplied with your system; then update 10.6.8. Reinstalling the operating system will not damage your data or applications. But, you must back up your data, if you can, on your external SSD before reinstall OS X.

  • Cannot go beyond the login screen

    Hello, I'm looking for help with my HP Pavilion dv7 with windows 7 Home premium I have my uncle who does not use it long. Long enough where he forgot his password and there is no guest just its accounts. So my problem one I'm trying to understand is if it is possible how can I get to the control panel or is it anyway I can create an account.

    Thank you Patrick

    Hi Patrick,

    You can use a password reset, as in the example of free utility at the following link.

    http://pogostick.NET/~PNH/ntpasswd/

    Kind regards

    DP - K

  • My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

    My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push

    Is that an iPhone 5? If so, you may have a battery of swelling which pushes the screen and that may have caused damage to the screen.

  • Blue vertical line appear on the screen of the series M Satellite

    I had a blue vertical line appear on my screen its about inch thick and is at - it start, can someone tell me if I can get rid of him? Thank you.

    Hello

    If this blue line is present from the first second after turning on the laptop that I presume it's because of the faulty graphics card. To be sure try to connect an external display to see the same thing will happen. If Yes, it is the evidence that this line occurs due to faulty hardware.

  • Satellite P30 - three vertical lines appeared on the screen

    I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

    Hello

    These problems usually occur due to a malfunction of the equipment.
    But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
    The update may solve some problems.

    However, if vertical lines persists then you should ask Toshiba service for assistance.
    He must check the laptop.

  • Yellow vertical line appears on Satellite Pro

    My machine is 18 months old. Last week a thin yellow vertical line appears on the monitor approximately one third of the left side. Tonight a thin purple line appeared about 1 cm to the right of the yellow.

    Any ideas what causes this and how can I get rid of him?

    Hello

    You you connected the laptop external monitor to check if the lines appear also on an external display? If this is not the case, check it.
    If the lines appear on the second screen, so I suspect it s a malfunction of the motherboard (graphics card).

    In this case, you do not have many ways to solve. For the most part a replacement is necessary.
    According to your message, sure the laptop is 18 months, so usually the guarantee should be valid if you have registered on the page of Toshiba notebook.
    The standard warranty covers the laptop for 12 months and after registration, you have a 24 months warranty coverage.

  • a pink vertical line appeared on my screen

    A thin pink vertical line appeared on my screen. How can I get rid of him. I tried the obvious bases.

    You probably have a line of dead or stuck pixels on your LCD screen. There are programs that carry out the display of this bike through various display models and some people recommend massaging where the pixel stuck watch manually.

    Video exercise programs show some real promise, but I'm not sure a lot of the other supposed fixed. Personally, I think that many of these patches are as a cure for sneezing that they are no longer for the laugh of the person who provided the remedy in the interest of the person in arrears by sneezing. In addition, if the pixel has become unstuck, you can always ask success.

    Use Bing or Google to find dead pixel and you will get a multitude of solutions thrown your way. Exercise video display may be worth trying.

  • White vertical line appeared on the screen.

    A vertical white line appeared about 3 inches from the left hand side on my Dell Studio 1749.  It started about 1 mm wide, but increases in width and is now about 4 mm wide.  There is no problem on an external monitor when connected.

    Is this likely to be a problem with the Panel or a chip problem?

    Thank you.

    Yes, probably would have worked, but I just replaced the screen in the end.

    Thank you

    Ian

  • My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

    Found an answer online. Here it is:

    I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

    Go to file > project settings > General and only software switch.

  • In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

    In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

    Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

  • HP 2159 m monitor - problem is 'running ants' vertical lines about 1 mm interval during the video display.

    At the following problem troubleshooting steps:

    (1) monitor confirmed cable is properly attached to the monitor and CPU.

    (2) monitor reset to the default settings in the monitor menu.

    (3) installed the latest driver - HP 2159 m 2.0

    (4) installed the latest driver NVIDIA graphics - 285.62

    Described as "mobile dash", as vertical lines appear to be 1 pixel wide, several pixels long, black, separated by spaces of many pixels and move vertically (up/down) direction.  Lines are separated by 1 or 2 mm.  On rare occasions, the lines are horizontal rather than vertical.

    I see this effect during video playback.  Mobile dots are more pronounced with mid - grey tones.

    Rarely see a few stray clusters of white pixels on screen in any of the video areas.

    Would appreciate any suggestions to solve.

    Mrwrightrl,

    This problem has been successfully resolved by HP nearly 12 months ago.  There is nothing wrong with my monitor is.

    It's a graphics card from Nvidia to the wrong address.  I was satisfiled with my HP and support products.

  • I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

    I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

    You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

Maybe you are looking for

  • 15 - ac622nl: laptop does not start, I see ho restore

    Hi guys,.yesterday, I change my hard drive with an SSD without restore (I want a clea facility).After you mount the SSD, I insert bootable CD win7, but at boot win7 won't, just start ho restoration e recovery...someone knows how can I installare a BO

  • Guarantee started before I bought my computer.

    Hello I bought my computer yesterday, but my guarantees started on 16/07/2012 and ends on 10/13/2013. Is it possible that this could be reset to account for my day real purchace? It was purchased from Currys Enniskillen, as I said yesterday.

  • Build 7600: This copy of Windows is not genuine.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Build 7600 error messages: this copy of Windows is not genuine. Recent changes to your computer What you

  • How can I remove the split screen option when you open an attachment on the email?

    I had used the option of screen split using strong control of the two tabs on the toolbar at the bottom of the screen and right click for the split-screen option.  Now, when I open an application such as Internet explorer, it happens in the split scr

  • Power TC-705

    Recently I bought the desktop computer sucks TC-705. All right. But I have question about the behavior of power light box that intrigues me. Once the power button will be permanently in white blink while the system will probably in mode 'sleep', but