Instalacion of autocad

Similar Questions

• Designjet 500 proposed purple colors AutoCAD printing gray

  We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

  Assuming that the print heads are out of all the colors correctly, try this:

  The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:
  
  1.
  
  Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
  2.
  
  Scroll to the paper type and press ENTER.
  3.
  
  Highlight Enhanced colors and press ENTER.
  4.
  
  Select the type of paper there and then press ENTER.
  5.
  
  Press the Menu key to return to the normal display of front panel

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• What Macbook should I buy AutoCAD?

  Hello!

  I just want to ask, what macbook should I buy AutoCAD? I plan to buy the Macbook Air w / core i5 but I saw in some discussions that it is not recommended for autocad... is this true?

  BTW... I am a student in engineering, and I'll use it at school it's why I do not prefer the Macbook Pro because it's big, bulky and heavy. I want the Macbook Air because it's elegant, light and it fits into my bag. And also I need the cheapest possible that's why I prefer really the model of Air. (because I'm just a student and my savings from my job part-time is not big so my budget is tight and only around $ 400-600)

  I need it after this break.

  Thank you! Prospects for a helpful answer.

  I'm not familiar with the application, but I suggest that you contact the school and get recommendations from them for minimum requirements as well as the developer of the software.

  Ciao.

• Satellite A60-102: error with an autodesk autocad 2006

  Hi all;
  Autodesk autocad 2006, I installed on my computer laptop satellite SA60-102, but it did not run and it displays an error saying 'DBX CASE 0' with 'ok', although I installed it on my desktop pc and it worked very well.

  I need your help ASAP
  Naim Kobaissy

  Hello

  Connection to the website http://www.cadchat.com/forums/lofiversion/index.php/t2443.html
  You may become Information for the (CASE of DBX 0) problem with AutoCAD 2006. It is a Site of cat Cad.

  By

• Satellite P300 - the graphics card will be cooled for Autodesk Autocad?

  OK boys and girls to help out me.

  "HE receive me a new laptop, would be" Toshiba Qosmio G50 PQG55A-04J01Y "with"PQG55A-04J01Y of G50 Toshiba Qosmio G50/04J 2.66 Ghz, 4 GB DDR2", 18.4 Widescreen, NVIDIA Geforce 9600 M GT graphics card" card good Graphice.

  But that one was a step to go, it only came with Vista Home Premium, not on Windows XP. But they can get me this Widescreen "Toshiba PSPCCA-0C601Y 17.0" one"with" 2.66 Ghz, 4 GB DDR2 17 "Widescreen, ATI Mobility Radeon HD 3650 graphics.

  What is my questions, the graphics card will be cool for Autodesk Autocad / Civil3d 2010 ATI Mobility Radeon HD 3650

  Thanks Civil3Dave

  Hello!

  I n t have experience with Autodesk Autocad and I put t know why you ask if the graphics card will be cooled but on each laptop the CPU, the GPU and chipset will be cooled if it of necessary. If the laptop overheats.

  Maybe you should check the system requirements for the programs you want to install. So you can determine if the graphics card is compatible with the programs.

  I hope I could help a bit.

  Good bye

• GTX 660 m and 3ds Max and Autocad 2013

  My y580 with the gtx 660 m does not allow 3ds max and autocad 2013 programs work.

  What is happening is that the program opens then application error and closes and it is with the card Nvidia be used in programs.

  However, I found workaround that said running applications with the intel HD 4000 instead. BUT what is the point to make that if you cannot take advantage of the GPU acceleration?

  Everyone knows about this problem?

  It was the latest nvidia driver causing the problem, that's what I condluded. I have returned my 295.55 default driver that came with the y580 and max and autocad works again.

• AutoCAD 2015 does not properly

  I installed Autocad 2015 successfully, but the problem is that I can hardly see the menus and drop-down menus because the fonts are too small.

  Hi Marilou,

  It would be great if you can answer the following questions:

  1. Windows operating system you are using?
  2. Are you facing problems with display apart from the program?

  I suggest you for the link and run the Microsoft Fix it and check if this may help:

  Troubleshoot Windows display the text on the monitor is not readable

  https://support.Microsoft.com/en-us/mats/windows_display_quality_diagnostics?WA=wsignin1.0

  The article applies only to Windows 8 and above all operating systems.

  If the problem is specific to AutoCAD, you can check the link for the AutoDesk community:

  http://forums.Autodesk.com/

  Let us know the results.

• AutoCAD - stretched xref

  When I Xref a plan in my main drawing, plan out all tense. I tried to copy the plan (xref) in a different drawing and then do it again. Also, I changed my main drawing a couple of times, using an existing drawing to another project that I know already worked for xref-ing in but nothing works. The plan I have try xref in the main drawing is always tense (in addition to being a much larger scale).

  What I am doing wrong?

  This forum is mainly intended for Microsoft products and services.

  You will need to ask this specific AutoCAD for developers (Autodesk).

  http://USA.Autodesk.com/ADSK/servlet/PS?SiteId=123112&ID=2714854&LinkId=9240617

  Good luck with it unravel.

• How to print a single plan in AutoCAD?

  HELLO FRIENDS

  PLEASE I NEDD INFORMATION ON THE PROCESS FOR A PRINTED PLANE IN AUTOCAD

  Hello

  I suggest that you ask in the forums here AutoCAD:

  http://forums.Autodesk.com/

  because they are more likely to have experts of the product concerned.

  Other AutoCAD support resources can be found here:

  http://usa.autodesk.com/support/documentation/ .

  Hope that helps.

• error code 1606 during the uninstallation of autocad and sewer storm

  error code 1606 during the uninstallation of autocad and sewer storm

  Hello

  I suggest you disable any autodesk / autocad related items from msconfig and see if that gets rid of the message.

  Click Start, type msconfig.

  To after the results, click on msconfig and click on the Services tab.

  I hope that helps!

• How can I impose a 'ladder' of ArcGIS on an Autocad drawining image?

  I need to show the location of the other underground structures on my Autocad drawing. The structures are shown in the program in GIS. If I can somehow insert the image into the program ArcGIS on the Autocad drawing, I won't have to go through the whole process of each of the structures a drawing.

  Hello

  I suggest ask you your question in the support forums Autocad. They will be able to guide you to the best.
  http://forums.Autodesk.com/
   
  Hope the information is useful.

• Push-button on the Logitech mouse M-BA47 does not work in AutoCad 2012

  I usually use the mouse logitech m-ba47 for autocad 2007 in a windows XP environment, now I use autocad 2012 with windows 7, unfortunately the button doesn't work anymore, can you help me figure out where the problem lies?, this button is so convenient to the Pan in an autocad drawing

  Hello Nino721,

  Have you installed the latest version of the drivers from the Web from Logitech website?

  This is where I would start with this problem.

  Have you contacted Logitech on this?

  Best regards

  Matthew_Ha

• AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem

  AutoCAD 2007 cannot be installed.says some compatible issues.how do solve this problem.

  tried several times but nothing helped.
  Please help.i need to the installed program because I am a civil engineer and without this program, I have all sorts of problems.

  Hi Anuppandey,

  1 Windows operating system you are using?

  2. What is the full error message you get?

  Autodesk does not officially support the versions of AutoCAD and AutoCAD LT 2009 and older on Windows 7.

  As a work around you can try to install the program in compatibility mode and check if it helps, here is the link:

  Make older programs in this version of Windows

  You can also view the following link support Autodesk for more information:

  Microsoft Windows 7 and Windows Vista compatibility

  Hope this information is useful.

• Štampanje većih formata iz AutoCad - a

  Da li HP officejet K7100, podržava rolnu I štampanje iz AutoCad-a formata 297 x 1000?

  Hello

  It seems that this question has been answered in another thread.  Please see the answer here:

  http://h30434.www3.HP.com/T5/other-printing-questions/printing-large-format/TD-p/4209010