Install ONLY Vision Demo Database and NOT the new installation?
During the process of installing Oracle Applications R12 on Oracle Enterprise Linux.for the database layer, the installer provides an OPTION that allows you to
ONLY install the (demonstration of Vision database) and NOT the (new installation)?
If so, can you point me to some documentation on how this is achieved and that a
estimate on how much disk space it would require?
Thank you!
Hello
According to the manual 'quick install', page 2-9, it says:
DIRECT QUOTE - "you can install a new database or a database of demonstration of Vision."
From this quote, I guess that we can install the demo database, without having to install a database of fresh PROD.
Don't you think that my assumption is correct?
Your assumption is correct, but you should consider that quick install will also install the application part also in addition to the database.
You can either install a fresh database (including the part of the application), but this database is clean (no data), and usually it is used for production after you make the necessary functional configuration OR a vision of the demo database (including the part of the application), and this instance is ready for use as functional configuration is already out in the database (used for demonstration purposes).
If you are doing a new installation--> you'll need about 90 GB (55 for the database that is clean and 35 GB of application).
If you do a vision--> you install will need approximately 260 GB (225 for the database which includes configuration data and 35 GB of application).
Kind regards
Hussein
Tags: Oracle Applications
Similar Questions
-
Before I upgraded to the latest version of firefox, I could see the history of my Web site in the navigation bar. By that I mean I could see the real links and I could move everyone to see that I wanted to visit. Now, these links do not exist (or if they are, they are not visible to me) and I cannot see the icon of the Web site and cannot see what link is by actually selecting. How to cancel it?
Try disabling hardware acceleration in Firefox.
- Firefox > Preferences > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
-
What are the best practices for creating only time data types, and not the Date
Hi gurus,
We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.
I would strongly appreciate ideas and suggestions.
Kind regards
RanjanHello
How do you intend to use the time?
If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.
Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average? If so, the NUMBER would be preferable.
You are just going to display it? In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.
As Blushadow said, it depends.
-
Help
What you trying to do? Transfer files between iPad and iPhone or what? Please give more details.
That means "the video is on VGA? VGA is the old connector between a computer and a monitor.
Videos on iOS Photos have thumbnails which resemble pictures with a small camera icon and the playing time. But when you click on them, they play.
-
Transfer the database 'faces' to the new installation of Photos
Hello! Start over fresh with a new SSD, iCloud backups worked like a charm: calendar, contacts, photos, etc...
But none given faces no marked the long (pun intended) so I guess my options are either happily click my way through the huuuuuge library once again (Yes, that's MOM... No, it's not MOM...) Yes, it's MOM... etc) or just copy the right core files and/or folders from my old hard drive.
Anyone who has any experience of this?
See you soon
/ K
If you have rebuilt your iCloud.com library, I think you will find that the data referring to the faces are still there, it just is not put in the structure of faces for you. Do a search for people you used to have in the faces, this can help you to rebuild the faces on your new library. I don't know that I would recommend to enter the hidden library files and the violin.
-
Insert the Vision demo database in the new facility
Hi gurus!
I recently did a new install of EBS 12.1.1 in my linux. But I want to have a database of demonstration Vision (SCREW). Where can I download the data creation for the demonstration of Vision database? ...
Thank you!!
Pablo. -.PabloArroyo wrote:
Yes I know, but I have a fresh install now. You tell me that if I run the rapidwiz now and I chose 'Vision démo Database' this would replace the new facility and will be doing an installation "Vision demo Database?Thank you very much!!
Pablo. -.
No, you must do the installation (new instance) again and choose to install the demo of vision database.
If you do not use the fresh database that you have already installed, you must remove it and then again to install the demo of vision.
Thank you
Hussein -
Original title: Windows Vista product key used for any new installation.
I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
OR
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usIf you do not have your Windows Vista installation media, you can download a fresh copy:
Windows Vista (in English) with Service Pack 1
Windows Vista (x 86) Windows Vista (x 64) X 14 - 63452.exe X 14 - 63453.exe Boot.wim Boot.wim install.wim install.wim Installation instructions (creation of bootable DVD/USB)
You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).
To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'
Select the record button browse and select the folder of Vista. Then select Advanced.
Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.
Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.
Select the generate button.
Save your .iso
Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.
Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).
FF
-
How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.
You could try starting in safe mode:
• Try safe mode if your Mac does not end commissioning - Apple Support
Which can allow additional troubleshooting.
Also, sometimes there may be a hardware problem which may help a SMC reset with
Depending on the cause:
• Reset the management system (SCM) controller on your Mac - Apple Support
You can try the test equipment to see what appears in the results:
• With the help of Apple Hardware Test - Apple Support
Other options include an appointment with a genius of Apple Store or a
service provider authorized Apple for the device inspected, diagnostic tests, etc.
There may be system software or hardware problems, in order to solve the problems with the aim
to see what the cause, can take time. If you have a backup in Time Machine &
end by using OS X Recovery to see OS X Utilities usage, disk utility or
other functions, be aware that this can make the more advanced features; It may not need.
Because this question appears as a symptom in Safari, which makes it more curious.
• Stop the pop-up ads and advertising on Safari - Apple Support
http://etrecheck.com/ http://www.adwaremedic.com/index.php
There may be a weird extension in Safari that may relate to some adware or other
elements, so this is another issue to consider. a report of Etrecheck may tell you if
some candidates are there; but maybe not. I do not primarily use Safari
so, my other two browsers work slightly differently.
Good luck & happy computing!
-
Lenovo K900 - displaying only and not the contacts when I call
Hello, I bought my K900 phone a few days ago in the shop in India. When I dial a contact or a contact trying to call me, only numbers and not the name of the contact on the phone. Help, please
Hello, the issue of the sorted mate. I did return the contacts, remove the phone and them even once, Voila - restored to work like a jewel
-
Printer prints only name form and not the information.
Hi paulminitello,
What changes did you?
You are able to print the test page?I suggest to reinstall the printer and then check if it helps.
-
Transferred video files from xp to laptop of visa. A received voice only and not the video file. Now, I have that video file without sound on the xp and visa phone only plays the sound. How can I fix it?
Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in graphics issues, including partial transfers (sound or video only) will be more than happy to help you with your problem.
Good luck! Lorien - MCSA/MCSE/network + / A +.
-
When you rename a file highlights only the name and not the name extension.
Hi all
When I rename a file, it highlights only the name part of the file name and not the name extension. I need the name of entire file highlighted when I rename a file. Where is the setting to change this?
Thank you
Pete
Hi Pete,.
Engineers also writes a blog on why they made this change, but to prevent millions of calls to support technical questions "I renamed my file and now it no longer opens.It might be possible to change this behavior with editing the registry, but I couldn't immediately find a reference to such a value.However, I have a workaround. I usually press F2 to rename a file (I'm a lover of keyboard, hate having to use the mouse). So I click on F2, then if I need to select both file extension, I can make one of these:- Press Ctrl-A
or - Press SHIFT - end
I generally use the method of shift - end because it's closer where my fingers are already on the keyboard (I'm a lover of keyboard, but I'm too lazy). Hope this helps at least a little. - Press Ctrl-A
-
I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old? I also installed on my desktop that will not change. Thank you!
Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help
-read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html
-or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-
Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.
Hi Matt,
I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud
Kind regards
Rahul -
Export of collections to the external file allows only export as a jpeg image and not the original file types?
Why is this?
DOOH-just found out why. the video bar was enabled prevail so on options-now them it works thank you for your answers.
George
Maybe you are looking for
-
use the apple store gift card purchase app
Hello One of my friends sent me an apple store gift certificate to buy a game for my son. How to do? It seems that the apple store gift card is only to buy apple products. He should have send me iTunes gift card. In addition, iTunes and app store are
-
HP 15-n259TX: DISPLAY CHART AMD NOT
My hp pavelion for computer laptop 15-n259TXOnly shows not only show graphic Intel internal 1.5 GB graphics amd 2 GB cardWhen I start my pc it shows a msgAMD graphics drivers are not supported or not you AMD adapter in the display managerPlease tell
-
How the Setup user account password?
Actual title: landing page set up to create a password for windows I am in my 60's and I don't know much about computers. I had an old computer that's motherboard died, I went to a repair shop and bought a second-hand, the tech was supposed to add a
-
Cannot show a TabbedPane pushing the NavigationPane
I made a simple sample of TabbedPane. But it is strange that the TabbedPane screen could not shown after the NavigationPane shoot, while the TabbedPane screen showed the newspaper when onCreationCompleted successfully. Is anybody know what is wrong w
-
Passage of variables to javascript in flex mxml mobile
Hi all I'm developing a flex app where I load a file (located in my assets in srcfolder) javascript using phase in Web mode. I am able to display the page but I'm not able to understand how to pass variables to the mxml file that contains the web sce