Install the Control Agent Grid 10.2.0.5 on Oracle Applications 11i

Similar Questions

• Get "unable to install the VirtualCenter Agent service" on ESX 2.5.4 after the upgrade of the VC to 2.5 update3

  I have improved my Virtual Center 2.5 to 2.5 update 3. After doing this, I have 2 of my ESX v2.5.4 servers which will not reconnect.

  I get the error message "Unable to install the VirtualCenter Agent service". I also see "the connection failed due to a bad user name or password" showing upwards in the list of tasks of VC. I don't know that I type in the good user/pass as I turn around tight and SSH on the server using the same user/pass.

  I tried to do "service vmware-vpxa restart" on the hosts. What log file I look in upon the host server to find the real problem, and is there any other suggestions on a quick fix to try before the word is supported?

  Thank you.

  Here is a good link that will help you in the installation of officers

  http://VMware-land.com/Vmware_Tips.html#ESX6

• I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr

  I installed the police of San Francisco system. his work in other applications, but not adobe, Ps and Pr
  What... do not know any solution.

  Hello

  Please try to post your query in communities:

  General discussion of Photoshop

  Illustrator

  Premiere Pro

  Kind regards

  Sheena

• The Oracle Application 11i clonning error

  Hi all again, a new day a new error :)
  
  I have an error while clonning Oracle Application 11i on windows 2003 sp1 32-bit db 9.2.0.6.0
  
  When you run adcfgclone.pl dbTier it runs successfully uptill 70% at this stage it throws the below error
  
  ================================================================================================
  Beginning database layer apply - Wed Mar 7 01:49:19 2012
  Logfile located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
  RC-50004: Fatal: error in ApplyDatabase:
  Creating control files is not
  
  ERROR when executing apply...
  
  ERROR: Cannot run adclone.pl
  
  Check the log file.
  =================================================================================================
  
  When I check the ApplyDBTier_03070149.log
  
  I found this below
  
  ==============================================================================================================================================================================================================================
  Profile Phase jump
  Jump apply Phase
  Running StartDbLsnr...
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:50
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:50
  NPRO_hassan.cmd exit with status 0
  ECHO is turned off.
  The environment settings are...
  ECHO is turned off.
  ORACLE_HOME: d:\oracle\neproddb\9.2.0
  LOCAL: NPRO
  ORACLE_SID:
  PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
  LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
  ECHO is turned off.
  ECHO is turned off.
  The log information is written to
  'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt '.
  ECHO is turned off.
  ECHO is turned off.
  From process to listen NPRO...
  ECHO is turned off.
  
  LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:56
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCNPRO))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 2: no such file or directory
  Connection to (ADDRESS = (PROTOCOL = TCP (Port = 1534))(Host=hassan.com))
  AMT-12541: TNS:no listener
  AMT-12560: TNS:protocol adapter error
  AMT-00511: no listener
  32-bit Windows error: 61: unknown error
  
  LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:57
  
  Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
  
  From tnslsnr: Please wait...
  
  TNSLSNR for 32-bit Windows: release 9.2.0.6.0 - Production
  NL-00280: creation of the journal of the d:\oracle\neproddb\9.2.0\network\log\npro.log stream error
  NL-00278: could not open the log file
  SNL-00016: snlfohd: error opening file
  32-bit Windows error: 13: permission denied
  
  Listening port could start. See the above error messages...
  
  addlnctl.cmd out with status 3
  
  .end std out.
  
  .end err out.
  
  Run CreateDB...
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: hassan
  sDbDomain: com
  sDbPort: 1534
  sDbSid: NPRO
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:51
  ECHO is turned off.
  ECHO is turned off.
  Wednesday, March 7, 2012 01:51
  NPRO_hassan.cmd exit with status 0
  ECHO is turned off.
  The environment settings are...
  ECHO is turned off.
  ORACLE_HOME: d:\oracle\neproddb\9.2.0
  LOCAL: NPRO
  ORACLE_SID:
  PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
  LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
  ECHO is turned off.
  ECHO is turned off.
  The log information is written to
  'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt '.
  ECHO is turned off.
  ECHO is turned off.
  Creating the NPRO database control file...
  ECHO is turned off.
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-12560: TNS:protocol adapter error
  
  
  DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
  S/O-error: (OS 2) the system cannot find the file specified.
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  ORA-01012: not connected
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0641: "EXECUTE" requires the connection to the server
  ORA-01031: insufficient privileges
  ERROR:
  ORA-01031: insufficient privileges
  
  
  ORA-01031: insufficient privileges
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  SP2-0640: not connected
  ECHO is turned off.
  Error checking...
  ECHO is turned off.
  The database was not created successfully. Stopping the instance...
  
  SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
  
  Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
  
  ERROR:
  ORA-01031: insufficient privileges
  
  
  adcrdb.cmd out with status 1
  
  .end std out.
  
  .end err out.
  
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: hassan
  sDbDomain: com
  sDbPort: 1534
  sDbSid: NPRO
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName.DomainName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Connection could not be obtained; return null
  
  Database utility - ADX finished-
  
  RC-00118: an error occurred during the creation of database
  Asked by oracle.apps.ad.clone.ApplyDatabase
  
  
  StackTrace:
  java.lang.Exception: control file creation failed
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:474)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:319)
  to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:295)
  to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
  the impossible (Native Method)
  at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
  at java.lang.Thread.run (unknown Source)
  
  ==============================================================================================================================================================================================================================
  
  Please help me with your advice
  
  Thank you
  Hassan

  Hi Hassan,.

  Is there a way to determine which application is locked this port that I tried again with a different port number and always the same result
  I don't have any other application or OracleAS application server running on the machine that supposedly can block a port.

  Do you have any product Oracle installed on the same computer? Please see the referenced above.

  You can try with a different port pool (i.e. 1 instead of 0) and see if you get the same error or not.

  In addition, see utility Portmon which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896644 for a list of ports that are used on the same machine.

  Thank you
  Hussein

• Cant Open Oracle Applications 11i forms after the last installation of JRE

  We're currently on Oracle Apps 11.5.10.2. I had to install the latest JRE 1.6 Update23 to work on BI Publisher templates and now I can't open all the Oracle e-Business Suite under Forms. It just breaks down-IE, has no message on JInitiator Console either. Same problem with the Mozilla Firefox browser.
  
  FYI... I have a colleague who is able to work on both... BI Publisher model Mgr and Oracle Forms end last installed JRE... So don't think it's a server problem, it's just my client configuration. Any help is appreciated.
  
  THX

  What is the difference between your customers and your colleague (in terms of client OS, browser, applications installed,... etc)?

  Do you meet the requirements (recommended browsers for Oracle E-Business Suite 11i [285218.1 ID])?

  Can you reproduce the problem with Firefox?

  Please see if these documents help.

  Internet Explorer crashes when the forms is launched [ID 430359.1]
  MS IE browser crashes with ' abnormal termination of the program or the "save Failk" when discoverer Access 10g of E-Business Suite 11i (Forms) or Oracle Forms [396773.1 ID]
  INTERNET EXPLORER CRASHES WITH ORACLE APPLICATIONS 11I AND MICROSOFT SILVERLIGHT ADD ON INSTALLED [ID 1077496.1]
  Internet Explorer Crash with unexpected Signal EXCEPTION_ACCESS_VIOLATION [ID 435562.1]

  Thank you
  Hussein

• 12.2 EBS on CARS; Do I need to install the infrastructure of grid on the applications node?

  I have my cluster of 2 nodes running without any problem.

  I do the rapidwiz for applications and then when it got to the point where say you, it's what you want put on some RAC nodes, when I clicked on the button

  It gave me an error about how it has not found the RAC nodes in an .xml file.

  Is it because you have to have the infrastructure installed grid and back up and running for applications to be able to search the RAC nodes?

  Also, do I need to configure the grid Infrastructure on the node applications in some way?

  
  

  I found several guides on how to do it, but I'm running into some different questions.

  Thank you

  Lady Allora.

  Hello

  Yes, you need to have PAP/GRID services i.e., CRS, CSS etc. must be running.

  When you select CARS as installation on screen rapidwiz, it prompts you for the nodes on which RAC services are running.

  If you have 2 node RAC, it will list the 2 nodes and you will need to select them for your installation.

  It is not that I know of any special configuration required.

  Kind regards

  Hugues

• Cannot install the vCenter agent service. Cannot download agent.

  I have a little trouble with three of my ESX servers. I'm in vCenter Server 4.0.0 162856. I have three clusters that I am currently using. One is my cluster of blade test environment on our old equipment on our internal network (running ESX 3.5). One is our new cluster of blade on our internal network. The final (and) I have a problem) are the pole of blade on our external network. The new run ESX 4.0.

  When I tried to add new hosts to our new cluster of blade on the internal network, everything went relatively well. I am trying to simply add hosts to the cluster on the external network, but every time, I get the "cannot install the agent vCenter. service '. Error failed to download agent. I read on the web that this can happen sporadically and try to remove/put on your ESX servers. I tried with all three, and no download. I first thought that the hard drives of my hosts were too small because I am booting from SAN and dug 25 GB drives strictly to the operating system. So, I tried 50 GB hard drives, and that did not help.

  My guess is that it may be some sort of firewall issue and asked our network guys to unblock the ports 902, 905 and 8443. Still, this does not seem to help. I checked the file/etc/hosts and three servers, the vCenter server, and the server for the backup is defined in there. I also tried removing and time of the cluster. The only thing that does not work I don't know a ping servers that are defined in the hosts file works (but not other local servers) is vmkping, which gives a * not configured vmkernel stack * error.

  Someone at - it ideas? Do you think it's firewall or vmkernel associated? My understanding is that the vmkernel would begin after it is attached to a host, but I could be wrong on this matter.

  Thanks to all who help!

  There are also port 443

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Install the CS6 of video Production on Win7 partitioned HARD drive applications

  Are there any problems with installing Master Collection CS6 on a hdd partitioned with the operating system and other applications? Video Production problems in particular?

  Thanks in advance for help / advice.

  A common practice is to install the operating system and all programs (nothing else) on a single disc with no partitions.

  The partitions will slow things down.

• What is the best way to get a Table name in Oracle Applications: 12.1.1 (web)

  Hello friends...
  
  
  I need your help my friends...
  
  
  We are currently working on Oracle Applications: 12.1.1
  
  I would like to know the best way to get the name of the Table to form based on a Web...
  
  
  Concerning
  
  Yas.

  Hello

  Please see this thread and documents referenced in it.

  RECORD HISTORY (or) COLUMNS in R12?
  RECORD HISTORY (or) COLUMNS in R12?

  Kind regards
  Hussein

• Install the control Grid on Solaris

  Hi all
  
  I try to install grid control 10g release 4 on my Homer of the database.
  
  She bounces back with an error:
  ==========================================================
  Checking Installer requirements...
  
  Checking the operating system version: must be of 5.8, 5.9, and 5.10. real 5.9
  Past
  
  Check the Temp space: must be greater than 250 MB. Real 4279 MB passed
  Check the swap space: must be greater than 500 MB. Real 5542 MB passed
  Monitor: must be configured to display at least 256 colors failed < < < <
  > > > Could not execute auto check for display colors using command/usr/openwin/bin/xdpyinfo(1). Check if the DISPLAY v
  ariable is defined.
  
  Audits of the requirement has failed. You must meet these conditions before
  
  continue with the installation, after which he will be again checked.
  
  Continue? (y/n) [n]
  =============================================================
  I tried searching in the otn & metalink. was not able to find solutions.
  
  concerning
  Susan John

  Hi Susan

  You are using an X 11 emulator as Exceed?

  Or let me know if you use another X 11 emulator.

  then try this:

  Description of the solution
  --------------------

  Exceed 6.0.1:
  -Run Xconfig (Start-> programs-> exceed-> Xconfig)
  -Double click on "Video".
  -Set
  Visual server: Pseudo-couleur
  -Reset the server as proposed by Xconfig

  Exceed 7.1.0:
  -Run Xconfig (Start-> programs-> Hummingbird Connectivity V7.1-> exceed-> Xconfig)
  -Double-click on "Definition of screen '.
  -Set
  Visual server: Pseudo-couleur
  -Click OK
  -Double-click on "Protocol".
  -Uncheck "Use 32 Bits per Pixel for TrueColor"
  -Reset the server as proposed by Xconfig

  Otherwise directly on Solaris, please check that:

  Check if the monitor has minimum of 256 colors.

  Run the following command from the operating system command line

  COLOR ='/ usr/openwin/bin/xwininfo - root 2 > & 1'
  If [' echo $COLOR | grep-i depth | awk ' $2 > = 8 {print 'good'}' | grep 'good'-c '-ge 1]
  then
  echo "Adequate."

  Elif test - z "$DISPLAY."
  then
  echo "DISPLAY is not defined.
  Elif [' echo $COLOR | unable grep | wc-l '-ge 1]
  then
  echo "Cannot open DISPLAY".
  on the other
  echo "need to at least 256 colors.
  FI

  Published by: Hub on October 29, 2008 23:50

  You are able to use

  / usr/openwin/bin/xdpyinfo(1)

  What is the output of this command?

  You are able to open xterm or xclock with no problems?

  Published by: Hub on October 30, 2008 12:00 AM

• I tryied to open the CC, it asked me to install the update and then gave me an error code: desktop application 50 CC could not be updated. What can I do?

  

  Thank you. I already solved the problem by using the Adobe support chat.

• Oracle Applications 11i with 9.2.0.6 RI install issue on OEL 5.4

  Hi friends,
  
  I install applications oracle 11i RI on OEL 5.4.
  
  After the installation when I start the service I get this UH newspaper...
  
  =========================================
  osagent reconnection.
  Osagent log messages in the home/oracle/R11I/r11aora/8.0.6/discwb4/util/osagent.log file.
  Waiting for the ADO start...
  ADOS has begun.
  OAD records messages in the home/oracle/R11I/r11aora/8.0.6/discwb4/util/oad.log file.
  Cannot start the Locator.
  Cannot bind to the ADO. Turn it back on...
  
  OAD is stopped
  Osagent is stopped
  Could not stop the Locator. No process id of file found.
  Could not stop the gatekeeper. No process id of file found.
  Could not stop the discoverer Sessions. No process id of file found.
  Cannot stop all preference discoverer. No process id of file found.
  Cannot stop any collector of discoverer. No process id of file found.
  /Home/Oracle/R11I/r11aora/8.0.6/vbroker/bin/osagent
  Osagent began.
  Osagent log messages in the home/oracle/R11I/r11aora/8.0.6/discwb4/util/osagent.log file.
  Waiting for the ADO start...
  ADOS has begun.
  OAD records messages in the home/oracle/R11I/r11aora/8.0.6/discwb4/util/oad.log file.
  Cannot start the Locator.
  Registration Session discoverer
  The Collector registration
  Apply preferences file: /home/oracle/R11I/r11aora/8.0.6/discwb4/util/pref.txt
  Finish the application preferences
  Registration of preference discoverer repository
  
  addisctl.sh: leave with the State 1
  
  
  .end std out.
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  
  .end std out.
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  Could not create Java virtual machine
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  Could not create Java virtual machine
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  Could not create Java virtual machine
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  Could not create Java virtual machine
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  Failed to initialize threads: cannot find class java/lang/Thread
  Could not create Java virtual machine
  /Home/Oracle/R11I/r11aora/8.0.6/jre1183o/lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
  
  ==================================================================================================================
  
  Any ideas how to fix it...
  
  
  Thank you
  [email protected].
  
  Published by: Arshad_Oracle_IBM on June 2, 2011 12:20
  
  Published by: Arshad_Oracle_IBM on June 2, 2011 12:21

  This is an expected - error please see (error when try to start discoverer (Addisctl.Sh) [854976.1 ID]) for more details.

  So, you must either upgrade discoverer 10 g / 11g according to these docs.

  With the help of discoverer 10.1.2 with Oracle E-Business Suite 11i [ID 313418.1]
  With the help of discoverer 11.1.1 with Oracle E-Business Suite Release 11i [ID 1073963.1]

  Or, exclude the discoverer of startup scripts script if you do not use the discoverer according to (after cloning discoverer is not fixed automatically by Addisctl.Sh. [ID] 371920.1).

  Thank you
  Hussein

• Hi, I am a consultant technical oracle apps HRMS. I wanted to know, can we implement Digital Signatures in the XML Reports.if Oracle Applications 11i Yes what is the approach to do? Your prompt response is appreciated. Sincerely, Patrice Sayyad.

  Hello

  I am Consultant technical Oracle Apps HRMS.

  I wanted to know, if we can make Digital Signatures in the reports XML for HRMS application of Oracle 11i applications.

  If so, what is the approach to do so.

  Your prompt response is appreciated.

  Kind regards

  Jean Michel Sayyad.

  Hi Patrice,

  The BI Publisher standard part of EBS applications.

  Most of the EBS reports (R12) rely on BI Publisher.

  If you check the 'XML Publisher Administrator' responsibility, you can see all the models used in the application.

  Your technical team should already know this.

  On the other hand OBIEE need separate licenses.

  But for you would be BI Publisher.

  See you soon,.

  Vignesh

• 11g grid control agent configuration

  Hello guys,.
  
  I have the problem with the configuration of the control agent Grid 11 g. The root cause of the problem is that the target machine is in the DMZ area. So, it lacks the active ports. Other agents, I have installed is working properly.
  
  The I'm talking about is able to download the data, but in the case of your setup I get the error message: "error occurred while obtaining information for the specified target. Possible reasons include: the target doesn't exist. failed to connect to the target. »
  
  Here, you're out of emctl agent status
  
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Home Agent: / orahome/agent11g
  File binary agent: agent11g/orahome.
  Agent process ID: 3011
  Parent process ID: 2985
  Agent URL: https://demodb:1830/emd/main /.
  URL of repository: https://admin:4900/em/upload
  Started at the: 2011-02-11 10:23:43
  Started by user: oracle
  Last reload: 2011-02-11 10:39:40
  Last download successful: 2011-02-11 17:04:08
  Total megabytes of XML files uploaded so far: 20.98
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 14.21%
  Last pulse in SGD: 2011-02-11 17:13:05
  ---------------------------------------------------------------
  Agent is running and ready
  
  emctl status who-details
  Oracle Enterprise Manager 11g Release 1 Grid Control
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  Enter the password to Root of Enterprise Manager (SYSMAN):
  Console server host: admin
  Console HTTP port: 7788
  Console HTTPS port: 7799
  Download HTTP port: 4889
  Download HTTPS port: 4900
  SGC is not configured with the PES or virtual host name
  Download of the agent is locked.
  SGD console is locked.
  CA active ID: 1
  
  Active ports:
  Admin to demodb-1830
  of demodb to admin - 4900, 4889
  
  What other ports available to be activated? 1521?
  
  Thanks in advance!
  Good day

  Then I think it's time to start checking the logging firewall product to see what the port is blocked and why it is blocked. Ask your technical firewall guys/girls so he or she can do. Otherwise, it will become a never-ending story.

  Eric

• I can't find the info bar or install the activeX control

  I'm trying to update microsoft windows, and this happens every time. When I try to right click on where the information bar is supposed to be located,

  under the address bar, it never shows me "click on Install ActiveX Control". Also, it does not I'm in the InfoBar area. I tried several times to complete this process and can not. How can I get this installed activeX control? Thank you

  Install the ActiveX control required to view the site The site is not correctly displayed on your computer without this control. To install it: 1 right click on the Internet Explorer information bar. It is located just below the address bar. 2. in the context menu, click install ActiveX control. 3. in the security warning dialog box, click install. Note: If the information bar does not appear, or if you have installed the control but still cannot use the website to take these steps to solve the problem. Example: Internet Explorer information with the menu bar

  Hello

  1 did you do any hardware or software change before the show?
  2. where you can install windows updates before?

  I suggest you try the steps mentioned below.

  Method 1: Fix the term.

  Troubleshoot Internet Explorer to IE quick, safe and stable:
  http://support.Microsoft.com/mats/ie_performance_and_safety/

  If the problem persists, perform the following step.

  Method 2: Optimize Internet Explorer and check to see if it helps.

  How to optimize Internet Explorer:
  http://support.Microsoft.com/kb/936213/ro

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.