Installation of a HP PSC1205 on a PC under Windows 8 NON-interneted

Similar Questions

• Can anyone help with 0x8009001d windows standalone installer error code does not not usually leave my Windows Manager of development I am using windows vista 32

  messages error 0x8009001d every time I try to download then says windows standalone installation does not

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Try to do a reset:

  How to reset the Windows Update components?
     http://support.Microsoft.com/kb/971058 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "This installation disc is not compatible with your version of Windows.

  I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

  Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Receive error message: Windows 7 installation disc is not compatible with your version of Windows.

  I bought windows 7 from the College Bookstore, and I can't install it - why this

  He says that the installation disc is not compatiable with your version of windows. to upgrade, you need the correct installation disc

  Hello

  You don't say what you are upgrading.

  Please read this information.

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Once you have read the foregoing regarding the upgrade paths, please also read this.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• During the installation of a program, receive the error message that Windows Installer is not installed properly on Vista

  I tried to install a program and I got an error message that says "Windows Installer" is not installed correctly and I need to contact the support staff.  I get also a message when I log that says steetings.ini is occupied by another program and it will not allow the sidebar to come.

  Try the Windows Installer Cleanup utility to troubleshoot the problem with Windows Installer:http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml.

  For the issue of the Sidebar, do a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to band Nike fuel of installation under Windows 7

  Original title: fuel nike band download

  I'm trying to set up my Nike Fuelband, nothing helped. He tries to access Free Download Manager. I am told an error message: "the Manager has been incorrectly installed. I'm trying to find the program in my system to uninstall and reinstall, and I'm not?

  I have a laptop Asus n61j 2010, Windows 7 with all updates?

  Hi Phil,

  From your description, I understand that you can't Strip fuel Nike of installation under Windows 7.

  What browser do you use?
  
  We will run the following fix - it and check if you can uninstall the free download manager.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  After uninstallation of Free Download Manager, visit the following Web site and install the NIKE + Connect software.
  

  http://support-en-us.nikeplus.com/app/answers/list/p/3169, 3174/session/L3RpbWUvMTM3MDUyMjUwOS9zaWQvcXBpQTQzc2w%3D

  Also check out the following link:

  http://support-en-us.nikeplus.com/app/answers/detail/A_ID/20908/p/3169, 3174

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Can I use a premium windows installation disc 7 that is for PC reconditioned refurbished Windows xp computer that has the same 32-bit?

  I have a Windows XP Professional and windows7 home premium which are the two renovated 32-bit PCs with installation disks... I want to install Windows 7 on Windows XP computer then tell me:

  Is this possible and if that is the case, what is acquired to make it work properly?

  Unfortunately no, you can't.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.

• I want to install the English version of PhotoShop (CC), a Finnish step. Is it possible under Windows 10 Finnish version? If its is, what do I do? The installation procedure gives no possibility to choose the language version. Why?

  I want to install the English version of PhotoShop (CC), a Finnish step. Is it possible under Windows 10 Finnish version? If its is, what do I do? The installation procedure gives no possibility to choose the language version. Why?

  Hi Matti,

  If your don't see preferences then may not be connected on the creative application of cloud, please check and confirm if you see a window for you to connect on the app if yes go ahead and this after click applications once it loads after that, click the gear icon and select Preferences.

  Kind regards

  Bani

• DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.  7 RUNNING

  DURING THE INSTALLATION OF LIGHTROOM DVD 6;  SHOWN IN LIGHTROOM UNDER OPTIONS WITH A WARNING COLOR YELLOW INDICATING VISTA NOT SUPPORTED.

  I'M RUNNING 7 WITH 4 GB OF RAM AND 30 GB OF FREE SPACE

  TOTAL INSTALL 0.0 KB

  GABRIEL

  Please see:

  System requirements for Adobe Lightroom for Mac OS and Windows

  You can try to run the application in compatibility mode:

  Make older programs in this version of Windows - Windows help

  Make the programs more compatible with this version of Windows - Windows help

  I hope this helps.

  Concerning

  Megha Rawat

• Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

  Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:

  See if the following can help:

  White screen

  https://forums.Adobe.com/thread/1249756