Installation of Browser-Appliance in VMware Player 10.0

Similar Questions

• How do you install Browser v10.0 Appliance in VMware Player?

  Hello

  I need advice/help please,

  I try to install the Browser Appliance v10.0 in VMware Player without success despite trying countless hours over the past five days, this software is certainly not newbie friendly :)

  .

  I can't find the button 'Browse dialog for the configuration of the virtual machine' which is part of the instructions below

  I tried many different ways to try to install it in VMware Player during the last five days, but nothing seems to work, I installed Ubuntu in VMware Player and then tried to find a way to install the device browser in Ubuntu, but nothing works.

  Here are the instructions I received with Browser Appliance v10.0 I downloaded on my pc that are outdated maybe?...

  Browser device, v10.0 - README file

  VMware virtualization
  * Operating system by Scientific Linux (version 6.0)
  * Mozilla browser (Mozilla Firefox 10.0)

  SUMMARY:

  This virtual machine provides a secure and isolated environment
  to browse the Web.

  It can be performed using either VMware Player available for free
  or other vPlatform products fourth-generation VMware.

  He was inspired by the browser 1.0.0 device provided by
  VMware Inc. to http://www.VMware.com/appliances/directory/80

  NOTES:

  This virtual computer includes VMware tools
  (vmware-tools - 8.3.12 - 559003) with Scientific Linux 6.0,.
  kernel 2.6.32 - 220.4.1.el6, updates Linux scientific through
  6 February 2012 and Mozilla Firefox 10.0.

  Power users may wish to consider and adjust several settings in
  the browser configuration file - Appliance.vmx using a text
  Editor in Chief. For security reasons, HGFS has been disabled by default.

  USE OF THE BROWSER:

  You can download the browser appliance from the VMware Web site
  at http://www.VMware.com/appliances/directory/507083 .
  On the same site, you can also download VMware Player, a
  free app of VMware that you can use to run the browser
  Device. For browser installation, just unzip the
  Download the file to your local hard drive.

  To run the browser appliance:
  Launch of VMware Player
  * In the dialog box, browse to the Virtual Machine Configuration
  File, navigate to the directory where you installed the
  Device browser, select File Browser - Appliance.vmx.
  and click Open.
  The browser unit automatically and the
  Supplied with the unit of browser, operating system centOS
  starts. This may take several minutes. Then the Mozilla
  Browser Firefox starts automatically. Enter a URL in the
  location on the ground in the upper part of the browser, then click surGo.,.

  you have the directory that contains the browser - Appliance.vmx and browser - Appliance.vmdk?

  Edit the vmx file and change this line
  virtualHW.version = "4".
  TO
  virtualHW.version = "6".
  8 or 9 if it does not work

  a double-click on this file should do the trick

• Installation of snow leopard in VMWare Player

  Hello

  I'm at the end of the help.  I bought a copy of snow leopard from apple, so this is a legitimate copy. I have an intel i7 3770 k processor, 16 GB of ram. I'm eager to try to install snow leopard on my virtual environment machine Iona. Up to now he tells me that I'm unable to install a 64-bit operating system. I have WO Windows 7 works beautifully and is a 32-bit operating system. The main operating system is windows 8 and it's 64-bit.

  If anyone has guides on how to install snow leopard without having to get a dubious copy of a torrent, I would be very grateful. All the world is that so far?

  Pthanks

  Clem

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine cannot be done when done in the Apple brand hardware but when done while running under OS X and for that you have VMware Fusion not VMware Player/workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• Guy Android coming to BB. Installation with VMWare player/Simulator/SDK issues

  I installed it,

  C/C++ QNX Momentics IDE...installer-bbndk-BB10_0_04-win32-186-201204250810-201204251322.exe
  BlackBerry10Simulator... BlackBerry10Simulator-Installer-BB10_0_04-195-Win-201204262359.exe
  VMWare... VMware-player-version 4.0.3 - 703057.exe

  I go to the early stages of QNX Momentics IDE and try opening an example (SDK)
  I get the Setup Deployment Wizard. I go to Device Setup and choose Simulator.
  What should I do now? The last step click the HELP (?) says he launched the Simulator, but I get a page with the title "Blackberry Simulator is not found and it's looking for a file VNX. I checked and tripled check the previous steps on the help icon.

  The Simulator is deadlocked C:\Documents and Settings\User1\My Documents\Virtual Machines\BlackBerry10Simulator-BB10_0_04. And I clearly see a BlackBerry10Simulator.vmx file in there
  but the SDK app doesn't see a single VMX file. The folder 'controllers' and other records.

  I tried the VMWare Player. It works very well.

  What I am doing wrong?

  Hey be based,

  The initial installation of the IDE and Simulator can be sometimes a bit daunting. Some of these steps you've done but im going anyway to list them:

  1. raise some Code by signing keys: keys

  2. download and install Momentics IDE and install

  3. download and install Blackberry Simulator

  4 download and install VMWare

  5 disable all firewall programs including windows firewall

  6. open VMWare-> choose open a Virtual Machine-> access your VNX file and open it

  7 if it opens really slow try changing options in VMWare 2 CPU and see if you can activate the "Virtualization technology" or "AMD Virtualization" in the BIOS

  8 the address of development of the Simulator (click the icon of the person with the toothed wheel on the menu bar of your alpha dev Simulator

  9. open the IDE, click window > Preferences on Windows and select BlackBerry and click BlackBerry Setup Wizard Deployment.

  10. follow the onscreen instructions to set up your target (Simulator or device) and add your chips of the device debugging.

  11 A this point your simulator could not auto discover so add your IP address you found earlier and if you haven't added a password in your simulator then let empty password.

  12. the rest of the wizard of BlackBerry deployment configuration should work just fine.

  13 open a sample application

  14. click on the file of the bar - descriptor.xml in the Project Explorer view, and then select "Set of symbolic debugging.

  15. right click on the project file, and then select Configurations to Build > Set Active > 4 Simulator-Debug

  16. right click on the project file, and then select generate the project.

  17. then right click on the project again and select run as > BlackBerry Application C/C++

  18. If all goes well, everything should work from there.

  Remember you need to do 14-17 for each project you want to run through the Simulator. And always turn on the virtual machine before you start the IDE I found that things always work better that way.

  I hope this helps!

• They killed the unity mode in VMWare Player 12. Can I get the installation program for Player 7

  Really sucks - VMWare killed unity Player 12 mode. If I had known that I have would have stuck to 7 Player - it worked very well.

  Anyone know if it is possible to get the installer for 7?

  Thank you

  Yes, we have abandoned the support unit for Linux customers only.  It is sad to see the function will, but our information indicates that Linux unit has been rarely used, and it was extremely difficult to maintain a level of quality that our customers expect, so we took the difficult decision to remove it.

  Try to download Player 7 from here: Download VMware Player 7.x

  See you soon,.

  --

  Darius

• Installation of VMware in VMware Player tools

  Hello

  I installed VMware Player v7, created a virtual machine (Windows) and wanted to install the VMware Tools via Player > manage > install VMware Tools... but nothing happens when I click on this option. The following 2 other methods I found in a Ko do not work either:

  • Enter D:\setup.exe where D: is the first CD-ROM drive configured for your virtual computer = > NOK as the virtual drive does not show the VMware tools.
  • Looking for the ISO file in the installation folder = > NOK: there is no ISO file.

  After searching on the forum, I realized that VMware Player doesn't come with VMware tools and workaround I used was to install VMware Workstation without a license on another computer, find the file "windows.iso", copy it to the computer, mount it as a virtual drive and start the client installation.

  The thing I don't understand is the reason for which the option is available in the VMware Player menu if the VMware tools are not? It's very confusing for people new to VMware and only install VMware Player...

  You need not download VMware workstation to get VMware Tools in VMware Player!  VMware Player 7 is working fine on my system and had no problem downloading VMware tools, so maybe it's a problem specific to your environment/system that may block recovery.

  Take a look at my answer: Re: VMware Tools missing in the Installation of VMware Player 7

• VMware Tools missing in the Installation of VMware Player 7

  Hi all

  If I try to install/upgrade to update VMware Tools after the Installation of VMware Player 7 no ISO will be connected to the virtual machine.

  I checked the directory of Installation of VMware Player for the ISOs of the tools but no ISOs are there.

  Can you help me out of this Situation or is it a missing element in the installer?

  Thank you

  Michael

  I just downloaded VMware-player - 7.0.0 - 2305329.exe and installed under Windows 7 x 64 and had no problems with it automatically detect installed VMware Tools to the guest operating system to be downloaded and successfully downloaded.  Having said that, have you tried? : Player > file > Preferences... > download now all components

  Maybe something is blocking you to download the VMware tools.

  You could also do it manually by using the following tools from VMware for VMware Player 7.0.0.

  • Tools-freebsd - 9.9.0.exe.tar
  • Tools-linux - 9.9.0.exe.tar
  • Tools-netware - 9.9.0.exe.tar
  • Tools-solaris - 9.9.0.exe.tar
  • Tools-winPre2k - 9.9.0.exe.tar
  • tools-windows - 9.9.0.exe.tar

  Unzip the file, then run the executable result and it will silently install the file without any indication that he actually did like this isn't really so planned how to do even if it works!

• VMWare Player-Challenge with network installation to enable the work offline connection-thanks in advance for any help

  Thank you very much in advance for all advice here.

  My situation:

  Developer of novice using a laptop Windows 7 with Ubuntu Server on VMWare Player.

  Customer need and server side development progress on the computer laptop while at home and outside (travel, sometimes without internet/Wi-Fi connection)

  I tried NAT, Bridged, Host-only, and can't seem to find an approach that works offline...

  More details below...

  My question

  How to configure the network to use VMWare player for development while home/away (PCI offline without an internet connection)?

  Thanks again

  Tony

  Other details

  My laptop runs Win7, I use Google Chrome, PuTTY, WinSCP client-side

  My hardware router has an IP address 192.168.0.1

  My VMware - Server Ubuntu - is configured to use the DHCP protocol

  Online I mean a wireless connection to the router and the internet

  Offline - I mean wireless internet connection/no

  Networking networking

  Works ok online. Does not work in offline mode

  When online, I get IP 192.168.0.7 ifconfig in vmware... I can ping the router from the virtual machine and ping the server ubuntu from the command-line to Win7

  Offline... Ping from VM to the router and Ping from Win7 to VM fail.

  NAT networking

  Does not work online or offline

  When 'online' I get IP 192.168.91.128 to ifconfig in VMware, I can ping the router hardware virtual machine ok. When I ping the server ubuntu command line of Win 7 I Request Timed Out

  In offline mode, I get the same IP 192.168.91.128 to ifconfig in the virtual machine. I can't ping the virtual machine hardware router... Destination Host Unreachable. When I ping the server ubuntu command line of Win 7 I have inaccessible Destination host

  Host-Only

  does not work for me either online of offline...

  While online, that is to say that I can get the IP... 192 168 110 128 but the virtual machine can't ping router... Network unreachable. Win7 cannot ping server... Request Timed Out

  While offline, I get the same address IP 192 168 110 128, but VM is unable to ping router network unreachable. Win7 cannot ping server... Destination Host Unreachable

  On the screenshot-VMnet1 as VMnet8 - have APIPA (assigned automatically free private) IP addresses, which should not be the case. Unfortunately I can't tell you what is the cause! Could be something of a facility fails to a VPN client. What you can do, is click on the 'Restore defaults' button in the editor of virtual network or re - install VMware Player (uninstall, reboot the host and reinstall "as Administrator").

  If you have access to the virtual network editor depends on the VMware Player version you are using. With some older versions - which had the "vmnetui.dll" in the installation folder - it was possible to start to operate:

  rundll32.exe vmnetui.dll VMNetUI_ShowStandalone

  André

• VMWare Player Installation error

  For various reasons, I had to uninstall and reinstall now VMWare Player. Uninstall ran smoothly, however, I get an error when you try to reinstall it.

  VMWare - Player - 5.0.2 - 1031769

  'C:\Users\Daphne\AppData\Local\Temp\vmware_1370705936\vmwareplayer_x64.msi' failed.

  Any ideas?

  You validate the checksum MD5/SHA1 of the package install against its published values to make sure that the installation package is not corrupt?

  You have Avast software installed such as AntiVirus or Avast Internet Security?  If so, you may need to completely uninstall Avast Software, as this has been a matter of the end for some users.

  If not take a look at: Troubleshooting of an MSI error when a VMware product or tools installation (1031302)

• VMware Player Installation bug

  Well, if I try to install the latest version or uninstall the old one, it's what I

  http://ImageShack.us/photo/my-images/851/vmwarebug.jpg/

  I think it happened after uninstalling earlier that maybe got cancelled or something, I don't really know. So yes, I'm stuck now with that, no uninstall, no installation. I tried manually deleting everything related to the tackler of vmware, but in vain. I followed what was mentioned somewhere, showing you how to remove related files, services and registry entries which have all been deleted when I checked.

  If any help? Other than to reinstall Win7 lol.

  For the workaround you can perform VMware-player-* .exe-e c:\vmptmp starting from a command line, then in the c:\vmptmp folder, run the .msi Installer.

  Also, before you delete the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually ' C:\Program Files\VMware/VMware Player ' you can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Isn't this utility is not installed by default however necessary to turn off the automatic bypass on VMnet0 if the system is multihomed and two or more physical host from the NETWORK adapter is active or you want to change the subnet of VMnet1 and VMnet8 addresses or work with additional VMnets.

• VMware Player starts the installation wizard.

  I have a laptop with W 7 and an ultra 2 AMD turion dual core mobile M 600. Tried to download the reader with the comand performance and as soon as I touched the

  Open the button disappears. I then downloaded using the Save button and it loads up to my office. Then I tried to double click it, tried all the options I have with right click, but it does not start. After trying for several weeks to find an answer, I decided to try this forum. I hope someone can help me.

  I suggest that take you a look at http://faq.sanbarrow.com/index.php?solution_id=1113 which lists a large number of possible problems, which could prevent the installation of VMware Player correctly.

  As a first step, take a look in the Windows Task Manager and kill "fixcamera.exe" and/or "webcam.exe" If these tasks are running.

  André

• VMware Player (VMware Workstation?) Interfere with the connection of the browser

  I installed VMware Player (or so I think) on Vista Home Premium 32 - bit SP2.  Here's what the Properties tab - & gt; Details shows for "C:\Program VMware Player\vmplayer.exe:

  Description of the file: VMware Player
  Type: Application
  File version: 6.5.4.11892
  Product name: VMware Workstation
  Product version: 6.5.4.11892
  Copyright: (c) 1998-2010 VMware, Inc..
  Size: 3.06 MB
  Updated: March 31, 2010 23:31
  Language: English (United States)

  I looked for this in order to make the version of the-what? -VMware Player or VMware Workstation I, and in order to find the right users Guide or manual.

  But this isn't my problem entirely.

  My problem is that I was using my HTTP (browser) client and it has been noticed that I could not connect to certain websites (e.g., http://www.gnu.org/).  I can do that at home, through my wireless router (configured for IP) static on the local network.  Then I go to work where I use the ethernet connection (not getting any IP by DHCP!... configured for a static IP address on the WAN).  I call tech info, that says they can connect.  I think it's because I'm using OpenDNS instead of the name of University servers, and then I enter the "Network Sharing Center' and see 'several networks' and THREE Local (ethernet) connections.

  After that think "WTF?" and think that 2 local connections and 3 are screwing things up, I disable all local connections and re-enable the connection with the hardware ethernet card.  Who has NOT solved the problem of my failed to connect to the web site, that is

  http://grub4dos.sourceforge.NET/

  The service

  http://GSiteCrawler.com/tools/server-status.aspx

  reports the HTTP 200 response code very quickly.  I use this service to see if the info tech group workplace blocks a web site.

  However, I want to learn more about virtual network maps created by the VMware Player (desktop?).  I ran the "vmnetcfg.exe" interface and in the Summary tab, see:

  Virtual network	Subnet	DHCP
  VMnet0 (bridged)	255.255.255.255
  VMnet1 (host only)	192.168.136.0	Activated
  VMnet8 (NAT)	192.168.219.0	Activated

  The guide I want to read should explain what are these local ethernet adapters and they can interfere with the operation of the host outside of the virtual machine.

  Thank you

  Welcome to the forums!

  The guide: http://pubs.vmware.com/ws7_ace26/ws_user/ws_net.html#989125

  Where is your problem to browse occur? In comments or host?

  VMnet0 is the virtual bridged network. He connected the virtual NETWORK adapter of your guests who are bridge transparently to your physical network device.

  VMnet1 is the network invited only, a virtual, where the host and the guests are members of. You see a VMnet1 NIC on the host, because it's the virtual card that the host uses to connect to VMnet1.

  VMnet8 is the NAT network. It connects to each stack TCP/IP Protocol on the host computer. Therefore the guest may use any communication device that uses TCP/IP. Th egust is hidden behind the NAT device. This means that all packets leaving the host, coming from the prompt appear to come from the host. VMnet8 virtual card is one that connects to the host on VMnet8 virtual network to enable external communication for the customer.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Installation of VMware Player 3.0 tools

  I'm under fredora 12 64-bit fully up-to-date as the host

  I have installed VM player 3.0.

  Initially, I couldn't run VMware Player.  I read on the web for

  MV/usr/lib/vmware/resources/mozilla-root-certs usr/lib/vmware/resouces/mizilla-root-certs.old.

  This allows me to run vMware player without it judgment of 1 second after the start.

  I could not install the tools.

  Then I read that we should leave the only CERT file and disable the file libcurl.so.4 what I did by

  MV /usr/lib/vmware/resources/mozilla-root-certs.old/usr/lib/vmware/resouces/mizilla-root-certs

  and

  MV /usr/lib/vmware/lib/libcurl.so.4 /usr/lib/vmware/lib/libcurl.so.4.DISABLE

  VMware Player started ok but still not able to install the tools.

  Each time, with windows 98 on I click on VM & gt; Install VMware tools, I get a message

  Certificate for the server error date top. you check the internet settings or contact administratot system.

  The network part works correctly, I can see the other computers on the local network, I can access web pages through Explorer.

  The log of the user interface is attacehd

  Nay ideas on what I can do wrong or get a new file mozilla - root.certs snack is courpt.

  Thanks in advance

  grnl wrote:

  If it has other ideas of tro suggestions, I'd be grateful thank you

  I don't know if you got your problem solved already, but if not, here's another way to do which does not uninstall reader, workstation installation, tools and uninstalling then workstation installation and reinstallation of the reader:

  http://communities.VMware.com/message/1488773#1488773

  I hope this helps.  If you do not get the problem solved, please post here what you did so that others may benefit from your experience.

  Kind regards

  Chris

• Difficulty of installation of VMware Player 3.0

  ^{Dear friends}

  ^ I downloaded VMware-player - 3.0.0 - 203739.exe, but

  during the execution of this I get the following error: ^.

  ^ _' Impossible

  to find the file bootstrap.lua in the installation package ' _ ^.

  ^ Help please. ^

  ^{Cordially Goyal; [email protected]}

  Confirm the checksum of the download to make sure that the file is not corrupted?

• Installation of VMWare Player on Mac OS 10.5

  Try to get VMware Player installed on several machines Mac OS 10.5 however did not use Unix for several years and am fighting to get installed it using the shell / terminal. In addition, users have no idea what is the password to root on each machine.

  1. How can I reset the password known on each machine?

  2. What download is the easiest to install?

  3. Someone at - it a 'Guide of Installation Idiots "?

  Thanks in advance!

  Ah OK, I understand it now. Yes it would have been cheaper.

  Fortunately for you, however, Fusion licenses are not too expensive ($79,-IIRC) and you can get discounts that too, for example on the http://www.yellow-bricks.com site (see the sidebar under advertising Veeam)

  If it's still too expensive, then it is a free alternative as the machine version virtual open source. Unfortunately, the future of this product isn't too safe, as it was sponsored by the Sun and therefore now under Oracle and they have already indicated that they do not want to continue the commercial offer of Virtual Box.

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com