Installation of Flash Builder 4.6 conflicts with the other version

Similar Questions

• Cannot install Flash Builder 4; Failed to retrieve the latest versions

  I am Windows 7 64 bit on a network where my Documents and my office are related to a roaming profile are applied where the quotas for the use of space. I was unable to install Flash Builder 4 because of this issue, which Adobe is known and apparently corrected (thanks, Chris A.).

  However, I can't even extract Burrito or the FB4.5 draft because the installation exe retrieved automatically on the desktop. Under 4.0, I could change the extraction location.

  Is there a way around this problem?

  Thank you

  Ron

  @Ron - Thanks for letting us know. I'm surprised that anyone encountered this limitation before today.

  Fortunately, there is a solution:

  -Open a command window and cd to the location of the downloaded self-extracting exe file

  -Run the exe with the/d (destination) option, which allows you to adapt the path where the installation program is extracted.

  In my case, the chain of syntax full looked this way:

  FlashBuilder_4_5_LS10.exe /d c:\customExtractionFolder

  -Chris

• Conflict with the Trial Version of Adobe

  I had little work on my laptop and all my software has been removed.  To read PDF flies that I need to review, I downloaded a trial version.  Shortly after, I bought a subscription.  Now, however, when I open a PDF file, the trial version stops and tells me that my trial is over and close my PDF.  How can I get rid of this trial version.  I tried to go into applications, but cannot identify the trial version.

  Gerry

  It is important to realize that the trial version is not different software. It's the same thing. If it is authorized, it runs. If this isn't the case, you get a limited trial.

  To prevent it from being a test you need to license it. You will sign just under the Adobe ID to subscribe with. It will get your account and give you the license.

• Can not register Flash Builder Premium 4.6 with CS6 Master Collection serial number

  Hello.

  I'm trying to license Flash Builder 4.6 Premium accompanying the CS6 Master Collection by using the serial number for CS6. I have installed CS6 Master Collection and then a license all products successfully but for Flash Builder Premium 4.6. When I run Flash Builder, it says that it is still in trial mode. When I try to license by using the serial number supplied with CS6, it said that the serial number is not valid.

  Please kindly help.

  Thank you!

  CB

  I managed to solve filling clean/all uninstall them and reinstall - in accordance with the following instructions:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Installation of Flash builder 4 has somehow broken my launch of running/debugging/profiling of flex builder 3.

  After installing Flash builder 4 neither to him nor to flex builder 3 has been able to launch flex swf:s. After hitting to run or debug flex gives a prompt saying "Flash Player is not found. Flex builder cannot locate the required version of Flash Player. You need to maybe install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version? ». The popup itself happened before the installation of flash builder 4. But normally I would hit just Yes and he would use any flashplayer is default.

  Now, if I click Yes it launch command prompt with a path to the installation folder of flex 3 Builder. When running flash builder 4, same happens except the path is the folder of installation of flash builder 4. Flex then begins waiting for connection of the debugger, and after awhile, he invites a timeout message. The title of command prompts is... \workspace\project\bin-debug\filename.swf.

  When you open the SWFs directly from windows, they open fine.

  I used the uninstaller for flash player software and recovered both fp9 & 10 and reinstalled the. That did not help. When we browser everything works fine, the problem occurs only when you launch standalone player. I tried to check the registry settings if there is something wrong, but all the flashplayers paths seem to be ok.

  Is there another hope to solve this problem than to reinstall flex builder 3 and flash builder 4 from scratch?

  You need content installed FP debugger

  http://www.Adobe.com/support/flashplayer/downloads.html download from here and install it and you should see the problem go away

  Download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.03 MB)

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• Satellite R840 - 12 c - conflict with the RFBUS "Bluetooth."

  My Toshiba Satellite R840 - 12 c has a problem with bluetooth.

  On the Device Manager tab, I see a conflict with the RFBUS "Bluetooth."
  So my bluetooth setting does not work... In other words my laptop cannot detect bluetooth despite being bluetooth devices "on"...

  > Tab in Device Manager, I see a conflict with the "Bluetooth RFBUS.
  So uninstall the device first, then download the stack of BT from Toshiba BT portal and after reboot again install this new.
  http://APS2.toshiba-tro.de/Bluetooth/

• 800 - 030qe envy: conflict with the new video card

  I bought and installed an EVGA GEForce GTX960 graphics card and discovered a conflict with the SATA cable on the motherboard connector. EVGA has recommended that I find a SATA cable with a connector at right angles. Can anyone suggest a source for a suitable cable? Mine is red (?).

  @bobsun2, welcome to the forum.

  This is a cable that should work for you.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  How your question about Windows Update?

  The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

  Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• I have Firefox and Internet Explore installed on my laptop, the question is, will they conflict with each other and should I get rid of one or the other?

  Hi, I have the browser explorer Firefox and Internet on my laptop, a friend told me that they will be in conflict with each other. the question is what I would do abouth this.

  Your friend has any idea. Both work very well.

• Flash Builder debugger cannot connect to the running application

  I've upgraded to Flash Builder 4.5 and now I get the error - old

  The Flash Builder debugger cannot connect to the running application.
  Ensure that:
  1. for applications in the browser, you run the debug version of Flash Player.
  2. for network debugging on a mobile device, you have a reliable network of the device connection and 7935 port is open on the firewall of your machine.
  Device connection help

  I get both on the Simulator (which is being upgraded to the latest version) and try to debug on my real playbook. There are a few other forums of discussion about this that suggest that the default Debug host IP is the usual culprit. However, which is set up correctly. I also added port 7935 firewall.

  I am able to ping ip address of my playbook without problem. Any other thoughts on what I might have configured wrong?

  Flash Builder 4.5 uses Air 2.6 for iphone and Android, for the moment, we can use only Air 2.5, so the compiler needs a couple of parameters. You have in the ActionScript Preferences tab build package-advanced - forceAirVersion 2.5 and under ActionScript compiler an extra line - swf-version 10

• I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  You can run two versions of the DW on a single computer?

  Yes.  Please do not duplicate messages.

  Nancy O.

• ORA-39060: one or more tables has declined due to conflicts with the main table

  Dear all,

  Currently, I have problems, I try to import the entire schema

  bash - $3.2

  bash - $3.2 impdp dumpfile = PRODDUMP BALL/BALL_BALL@BALL. DMP DIRECTORY = DUMP_DIR FULL = Y LOGFILE = IMP Log REMAP_SCHEMA = BALL: BALL REMAP_TABLESPACE = BALLDATA:BALLDATA

  Import: Release 11.2.0.3.0 - Production the my Sep 30 15:28:08 2013

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, Automatic Storage Management, Oracle Label Security, OLAP,.

  Options of Data Mining and Real Application Testing

  ORA-39060: one or more tables has declined due to conflicts with the main table

  UDI-31626: operation there was error ORACLE 31626

  ORA-31626: there is no job

  ORA-39086: cannot retrieve information about jobs

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 3326

  ORA-06512: at "SYS." DBMS_DATAPUMP', line 4551

  ORA-06512: at line 1

  Any solution please

  Hello

  You can use the view:DBA_DATAPUMP_JOBS

  then use the table as drop statements

  drop table . purge;

  HTH

• my audio syestem of beats went when I choose windows 8, how can I return it with the full version?

  my audio syestem of beats went when I choose windows 8, how can I return it with the full version? I have hp pavilion dv4 5110tx

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59882.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Then, download and reinstall the Chipset driver on the following link.

  Chipset Driver - Windows 8.

  After reinstalling, restart the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again before checking if the Beats Audio is now listed in the windows control panel.

  Kind regards

  DP - K