Installation of ODI 11.1.1.6.0 on Windows

Similar Questions

• Installation of ODI 11.1.1.3g

  Gurus.
  
  I have a few questions about the installation of ODI 11 g, I have the 10g installation experience could you please help me with these questions:
  
  1. is there a 64 bit version download of ODI 11 g can I download and install Server 2008 R2 EE x 64?
  2. can I install any Studio ODI on 11.1.1.3 on a 64-bit server
  3. do I need to use the remote control before I install ODI or can I judt connect to the master repositories similar to the installation of version 10.1.3.5.
  
  Thanks for the help.

  good. could you assign the correct score?

• Multiple users on the same installation of ODI?

  Hi all
  
  is it possible to have multiple users work with the same installation of odi? We have a (citrix and VMware) virtualized IT infrastructure where we can have multiple users on the same virtual instance. From our point of view, unproblematic license as we have a covering set literally everything.
  
  One of the problems are the configuration files stored in the odi installation directory (..) «(/ bin).» Is there a way to tell odi to store them in a different location, for example. the user home?
  
  Thank you very much
  Benno

  ODI research in the current working for configuration files directory, for the most part, you would have problems with the snps_login_work.xml and snps_login_security.xml files, but these can be common across all users. (just do not save the name of user and password to the users of the ODI in them).
  How works ODI, most of which is created is stored in the repository in any case, it is only local GUI config of the things that can be stored locally.
  Short answer, Yes, you can, but maybe have to change some config files to make it work.

• Can anyone help with 0x8009001d windows standalone installer error code does not not usually leave my Windows Manager of development I am using windows vista 32

  messages error 0x8009001d every time I try to download then says windows standalone installation does not

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  Try to do a reset:

  How to reset the Windows Update components?
     http://support.Microsoft.com/kb/971058 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "This installation disc is not compatible with your version of Windows.

  I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

  Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

• Error: "Windows Installer is not installed properly' & error code Ox641 for Windows Update.

  Original title: my "Windows Installer is not installed properly.

  I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!

  Hi Mark,

  Did you do any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Reference: You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair install of Windows XP after you install Windows XP SP3 immediately after a new installation of Windows XP SP2 or

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Error message "Could access the Windows Installer Service" when you install the application

  Hope the helps of information.

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Receive error message: Windows 7 installation disc is not compatible with your version of Windows.

  I bought windows 7 from the College Bookstore, and I can't install it - why this

  He says that the installation disc is not compatiable with your version of windows. to upgrade, you need the correct installation disc

  Hello

  You don't say what you are upgrading.

  Please read this information.

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Once you have read the foregoing regarding the upgrade paths, please also read this.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• During the installation of a program, receive the error message that Windows Installer is not installed properly on Vista

  I tried to install a program and I got an error message that says "Windows Installer" is not installed correctly and I need to contact the support staff.  I get also a message when I log that says steetings.ini is occupied by another program and it will not allow the sidebar to come.

  Try the Windows Installer Cleanup utility to troubleshoot the problem with Windows Installer:http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml.

  For the issue of the Sidebar, do a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I use a premium windows installation disc 7 that is for PC reconditioned refurbished Windows xp computer that has the same 32-bit?

  I have a Windows XP Professional and windows7 home premium which are the two renovated 32-bit PCs with installation disks... I want to install Windows 7 on Windows XP computer then tell me:

  Is this possible and if that is the case, what is acquired to make it work properly?

  Unfortunately no, you can't.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.

  Windows installation was not successful. Your previous version of Windows is being restored. Do not restart your computer during this time.     I have a small Toshiba laptop which has installed Windows 7.  I uninstalled my Norton (that I was instructed to do so by a friend); tried to reinstall Windows 8; and got the same message.  Any suggestions?

  Hi Dreah117,

  Thanks for choosing Windows 8!

  I understand that you get this error trying to upgrade to Windows 8. Its good that
  you have removed your anti-virus software are there is a possiblity of it
  causing problems with installation

  I have a few questions about your system

  1. what operating system (OS) you upgrade?
  2 what is a 32 or 64 bit OS?
  3. you try to install a 32-bit or 64-bit of Windows 8?

  You can try these methods to see if it solves the problem

  Method 1:
  Run the upgrade wizard and check to see if your system is compliant with the minimum requuirements.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  Method 2:
  Disable or uninstall a software such as CD/DVD burning utility or third-party disk utility to defragment programs such as perfect disk / Daemon Tools

  (a) in the notification area, next to the time looking for icons of software disk utility

  (b) pass the mouse over it to check the name

  (c) right-click on the icon and select "Exit/Disable" or a similar option.

  Method 3:
  Make sure your computer is updated through Windows Update.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Update

  Method 4:

  Disconnect all unnecessary external devices such as printers / joysticks etc.

  Method 5:
  Put the computer to boot is a way to solve problems

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 3 on the link if upgradation fails to return your system to a normal startup.

  We know what's going on and if we can be of any other assistance.

• Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

  Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:

  See if the following can help:

  White screen

  https://forums.Adobe.com/thread/1249756

• Installation Studio ODI

  Hi all..

  I want to just install ODI Studio... I installed on a server ODI and my goal is Studio installed on my client in order to connect to the agent of ODI.

  When I run setup.exe... It gives me the option to install the ODI Studio(with local agent)... is this the one I should install...

  My goal is just to install Studio...  I worked on other products where the servers are installed on a box and install us console/client for this application and access our application on the server... like EM for the oracle database Oracle Developer or toad.

  Thank you

  Yes, choose the agent local installation option. It is incorporated in the Studio and and facilitating communication with the repositories.

• Installation of ODI with SQL Server 2005

  Hello
  I try to install ODI with MS Sql Server 2005.
  I created a database in Sql Server and created a user with rights to connect to the database db_owner.
  
  While trying to install master repository, I selected Sql Server with the following details
  Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver
  URL: jdbc:microsoft:sqlserver: / / < myhostname >: 1433; SelectMethod = cursor
  
  The repository not created in error:
  * com.sunopsis.core.q: java.sql.SQLException: [Microsoft] [SQLServer 2000 for JDBC driver] [SQL Server] the new tabular data stream (TDS) procedure remote call (RPC) protocol stream is incorrect. Parameter 1 (""): data type 0 x 38 is unknown *.
  
  Now, if I change the URL to jdbc:microsoft:sqlserver: / / < myhostname >: 1433, the repository is created successfully. But when you log in Repository Manager to the topology using the same basic shape, again invites me the same error.
  
  Has anyone faced the same problem?

  Hello

  You are using SQL server 2005 but try to connect by using SQL server connection details 2000 you should use

  com.microsoft.sqlserver.jdbc.SQLServerDriver

  JDBC:SQLServer://servername:1433; databaseName = DBNAME; SelectMethod = cursor

  You must also make sure that you use the correct driver SQL server 2005, if you use a version of Java before 1.5 to ODI so you will need the JDBC SQL Server 2005 1.2 driver.

  See you soon

  John
  http://John-Goodwin.blogspot.com/