installation stuck at 90%, update stuck at 0%

Similar Questions

• Satellite C850-A958 - BT Stack installation stucks & utilities BT are not available

  Model: * Toshiba Satellite C850-A958 *.
  Purchase date: January 13, 2013
  Warranty status: still under warranty until January 13, 2014

  * Issue 1: * "Bluetooth Stack" utility is blocking and not to complete the installation procedure.

  * Problem 2: * there is no utility 'Bluetooth' work due to the installation of stuck.
  Operating system: Windows 7 64-bit

  Address the situation/address Description
  My laptop SSD (Solid State Disk) had a manufacturing defect represents in the form of bad sectors & because of the guarantee, he was in a process of change for the defective part by the center of service allowed in my country.

  When she came back to me, I started to install the operating system and drivers (my computer portable edition does not include operating system drivers).

  I faced a serious problem and it was not existing before, when installing "Toshiba Bluetooth Stack for Windows" the installation process is not completed successfully and it's freezes to an important point.

  This process blocked the program of "Bluetooth Stack" menu is already created and if I try to run any utility of it I get an error message saying: + "the program can't start because TosBtAPI.dll is missing on your computer. Try reinstalling the program to fix this problem. » +

  Installation stucked treat freezes - for more than two hours in fact - and the only solution cancels the right low "Setup Bluetooth Drive_r" installation process by pressing "Cancel".

  After windows restarts, I found the menu of the program seems like a properly installed (complete the menu & highlight of the elements on the inside), but if I run one of the utilities include a message required to reinstall the Bluetooth driver and when to start it stops at the same point of freezing again as endless and repeated behavior.

  I tried to install a new copy of Windows several times - also re - download the source file for the Web from Toshiba site several times with the same result every time.

  Currently, I can't use any uility driver bluetooth more!

  I want to know:

  What is the solution to this situation?
  Is it possible that the bluetooth hardware is damaged during the process of evolution of the SDA in the service center?

  Thank you

  Hello

  I think I know what you did wrong the laptop supports the Realtek Wlan / BT combo card.

  This means that a single module shares the feature WLan and BT.
  To ensure that the two would work correctly, a [Bluetooth Filter Driver Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh 3439 = ortMod & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 81895 & OSI D = 30 & driverLanguage = 42] must be installed.
  After that, you could install the battery Toshiba BT.

  Next to the installation of this software, you must also install VAP (value added package) which is an essential part in the Windows 7 environment.

  Once again:
  First install: VAP
  Then Realtek Wlan driver, after this suite Bluetooth Filter Driver Package by Toshiba BT stack

• E.M.P. Installation stuck at installing weblogic

  Hello

  We're reinstall on the computer after the complete uninstall.  By the way same OBIEE installation has also been glued on the same way on the same server.

  OBIEE 11.1.1.7.1 Installation stuck at 97%

  We have workaround for this problem on SR. He has been to install weblogic separately, then install OBIEE.

  Concerning

  G1

  11.1.2.4 product version

  Windows Server 2008 64 bit

  Screenshot

  

  Journal

  2015-12-23 22:32:04, 498 INFO [readSilentXML] com.bea.plateng.wizard.installer.common.parsers.TemplateParser - Silent xml file successfully treated...

  2015-12-23 22:32:06, 307 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - value of the property for win32_jdk160_29b11.zip not found...

  2015-12-23 22:32:06, 307 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - value of the windows_ia32_jrockit_160_29_D1.2.0 property - 10_jdk.zip not found...

  2015-12-23 22:32:06, 479 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - value of the property for win32_jdk160_29b11.zip not found...

  2015-12-23 22:32:06, 479 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - value of the windows_ia32_jrockit_160_29_D1.2.0 property - 10_jdk.zip not found...

  2015-12-23 22:32:06,495 [House] WARN com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - D:\Middleware\EPMSystem11R1\... Directory is not empty. Proceed with the installation?

  Hello

  Found this remark 2099095.1 published recently.

  Cause

  The installation process attempts to access the Oracle lb site - ccr.oracle.com.  The current security settings of firewall allow connection to the site, but they are blocking content being returned by Oracle.

  To verify that this is the issue, while the WebLogic installation is underway:

  1. open a command prompt window.
  2. type: netstat
  3 check the flow rate for a connection to lb - ccr.oracle.com, listed in STANDBY mode

  Solution

  In the configuration of your firewall, enable "Download content" for lb - ccr.oracle.com.  Or completely block the lb - ccr.oracle.com.

  Although I am confronted with exactly same error on newspapers, this side is not in standby mode. Always wanted to check how can I block this link?

  Concerning

  G1

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• Error Code 80070663 - installation Problem__ Windows security update

  Hello
  I have a problem installing some updates for Windows Vista. I received the error code 80070663 during the installation of the security updates. When I tried to install the same updates from the Windows Download Center, an error message pops up that says that my windows installer has been altered, so I couldn't download the security updates. I don't know what to do now. Please advise! Thank you!!

  MH321,
  Here are a few things to look at who can help.

  Solve Windows Update installation issues

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  How your question about Windows Update?

  The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

  Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Windows 0 x 643 error code... regarding the installation of Microsoft Windows Update

  Get rror Code 0 x 643... regarding the installation of Microsoft Windows Update ===>>> update of security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941).  Have tried to install several times with the same result.  Please NOTE... that every time I go to Windows Update (& execution 'check available updates') than post results this update (security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941)) however indicates that the update is already downloaded on my machine & requires ONLY being installed.  (personally, it is my belief that there could be a problem with the download... what causes the installation to fail... However NO way to re - download is available?  I tried to delete my temporary Internet files & Cache + ran disk cleanup... niether have removed the download of my machine.  Also checked 'Add Remove Programs'... just to see if it was listed there... and it wasn't!  So certainly, the update is NOT installed, I can NOT delete the download that is perhaps corrupt... and preventing me to replace it with a NEW copy.)   ANYONE GOT SUGGESTIONS?   Help, please!  All other updates are installed on the machine... other than this one, & I'm off clues as to what to try next.   Thank you!

  information system: Microsoft Windows XP

  Media Center Edition

  Version 2002

  Service Pack 3 (w / all available updates installed) EXCEPT this one!

  HP Pavilion Notebook dv6120us

  Intel Core 2 CPU

  T7200 @ 2.00GHz

  2.00 GHz, 1.99 GB of Ram

  Internet Explorer Version: 8.0.6001.18702

  Build: 86001

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• Why do I get error code 66A, during the installation of the security updates

  I have problems with error codes during installation of the security updates.

  Has 66 error code when trying to install KB2160841
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3
  (Follow the steps described in this post by Diana D)

  Also, try the following steps (credit: Control_tps):

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  See also: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit

  J W Stuart: http://www.pagestart.com

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• Update fails - creative cloud, updated installation. "Cannot be updated, the error code 50."

  I was on a trial and today I paid for and a subscription. Adobe cloud said it had to be updated. Whenever I try, I get: update fails - creative cloud, updated installation. "Cannot be updated, the error code 50."

  @

  "Unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

• failed installation. Error U44M1P7 | Updates / uninstalled adobe photoshop CS6 Panel now

  failed installation. Error U44M1P7 | Updates / uninstalled adobe photoshop CS6 Panel now cant find to thwe creative cloud were so I get to reinstall

  Hi scubamedicjoe,

  Please consult the KB to install CS6: http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html .

  Kind regards

  Romit Sinha

• Update April 1: How can I fix the installation stuck at 35%?

  I tried to install the updates for Muse and the installation is stuck at 35%. It was about 10 minutes and it does not advance.

  How can I start all over again?

  Thx for the help.

  No one can tell you anything without the proper system or other technical details info. You can always try to run the cleanup tool and start from scratch.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Mylenium

• Flash Player update continues installation stuck at 30%

  I have mac os x and I tried to install a Flash Player update. He downloaded instantly 30% and then got stuck. I tried to install several times force closing safari and ensure no antivirus or firewall blocking the update of the download. I also tried to restart my computer. Later I tried using a program to uninstall Flash Player and Flash Player then put it back in place, but the same thing happened again, stuck on 30%. I have no idea what else I could try and what is happening here. What should I do? My computer is a Macbook Air 2013 OS X Yosemite 10.10.2 version

  Here is the solution! It actually works! How to perform a "clean installation" of Flash Player in Mac OS X

• Creative cloud app: updated installation: stuck at 2% Message "tries to connect to the server.

  I have cleared all my browsers cache, uninstalled the app and re-installed, cleaned up the hosts, checked every single thread that is available with the same problem... none are resolved.
  Web-fonts used to synchronize until the update happens so I can't really work.  It is a very big problem for me.  The screenshot below is the window of my creative cloud for the last 4 hours

  I am running windows 7 Home premium v 6.1 service pack 1

  

  You see connection to the CC - stuck on "installing update...". »