Instructions

Similar Questions

• How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online?

  How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online? I find too many misadventures and not happy.

  Hello

  Check out this useful tutorial: https://www.igeeksblog.com/how-to-downgrade-macos-sierra-to-mac-os-x-el-capitan/

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• Following the instructions to FolderLink, it says go to options / Accessories Panel / etc. But there is no input panel.

  Following the instructions to FolderLink, it says go to options / Accessories Panel / etc. But there is no input panel.

  I went in the thunderbird menu / preferences/attachments and has managed to put in place.

• Instructions to set the master password - where is Options?

  I want to set a master password (Thunderbird on MacBook OS X Yosemite 10.10.5).)

  Instructions to begin with 'at the top of the Thunderbird window, click the Tools menu, and select Options.
  but I do not get an Options I can select (see screenshot).

  Clearly I must be misunderstanding something simple enough (I'm new to Mac after using Windows for years). Help please

  _Linux, http://KB.mozillazine.org/Menu_differences_in_Windows, _and_Mac

• You want to implement the master password. Instructions say go to the window/button firefox, options, tools, options, etc. I don't have these buttons on Firefox. ?

  attempt to set the password according to the instructions on your Web site; However, I do not think that I have a toolbar that you want to use. Who can I load on. I don't want to put on one that doesn't really work.

  In the left column of the article, under editing tools, you can select your version of Firefox and Windows, where you followed a link code for an older version. For Windows 7 + Firefox 40:

  https://support.Mozilla.org/KB/use-master-password-protect-stored-logins#Firefox:Win7:FX40

• FOLLOWED THE INSTRUCTIONS INCOMING AND OUTGOING STILL NOT ABLE TO SEND AN EMAIL.

  QUESTION BY E-MAIL:

  FOLLOW-UP iMAC SETTINGS for ROGERS.

  THE SETTINGS OF MAIL SERVER INCOMING AND OUTGOING SERVER AS WELL. ALWAYS IMPOSSIBLE to SEND the incoming SERVER icloud MAIL READS. PO4, map.mail.me.com and outgoing readings ROGERS (OFFLINE)

  ISTHERE A WAY TO CHANGE THE SETTINGS? THANKS ELLIE

  OS X Yosemite 10.10.5

  Serial number. D2 * 8J7

  It is difficult to read.  Please use the top & bottom case.

  Please provide a link to the instructions.

  Please provide image on the screen to how you have configured these settings.

  -------------------------------

  How to show an image on the screen.  Avoid personal identification.

  on Mac, you do:

  Command + shift + 3 will have the entire screen.  You hear a click.

  Command-shift-4 lets you decide what to take.  Changes of mouse pointer. Move the mouse to the upper left corner of the image of desire.  Press and hold the left key of the mouse to start the image.  Drag the mouse to lower left where you want to stop the image.  Mouse release.

  You will get a .png file to the desktop image.

  On the entrance sign of the forum, you will see the camera icon.

  

  Click on the camera icon.

  another window will appear.

  Make sure you have selected the in your the computer tab.

  Click the Browse button

  A Panel to open the file.  Select the file.

  After selecting a file, I have this screen showing.

  

  You need to click Insert Image.  You may need to scroll down to see the button to insert an Image.

  R

• I use MozBack to the top, when I followed the instructions of the wizard a file on my portable hard drive. I went back to Thunderbird and my Inbox was deleted

  I use MozBack to the top, when I followed the instructions of the wizard a backup file on my portable hard drive. I'm back to Thunderbird I found the content of my Inbox was deleted. Sent and deleted files have not been removed. I then returned to MozBackup and followed the instructions to restore the information from my Inbox, but it didn't happen.
  What I did wrong.

  as incredible as it may seem. MozBackup has nothing to do with Mozilla or Thunderbird. If you have any questions about mozbackup I don't really know where you're going.

• My password does not work for my email address. I can't receive your instructions to solve this, because I can't open my e-mail address.

  I'm trying to enter my Thunderbird e-mail account, using the password I always use, but it won't work. The system responds, "the sending of username failed. Mail server mail.comcast.net replied: internal server error. "I tried to get help to change my password, but the instructions are sent to my e-mail address, to which I can not access! Thanks for any advice you may have.

  Go to the Comcast webmail page and see if you can connect here. If you then your username and password are fine. Incorrect server settings may also cause the password error. You may need to update those.

• installed Firefox depending on the instructions on the screen, but cannot connect. Have now added the new user name. How to complete the installation?

  I can't connect or open Firefox. Uploaded by on screen instructions but still cannot connect or use firefox.

  Installation of Firefox is not dependent on the signing in. You don't need a username / password for Firefox.

  Please explain what works and what's not more in detail.

• are the same instructions for the migration of outlook 2003 data as they are in your instructions for outlook 2007

  The site gives instructions for mobile information e-mail from Outlook 2007 to Thunderbird, are these instructions applicable to Outlook 2003? In other words the instructions will work on Outlook 2003, that I have, or are there different instructions to move the contents of Outlook 2003 to Thunderbird?

  All versions of Outlook import in Thunderbird the same way.

  They need for Outlook must be installed and only the PST files in the default outlook defined and loaded in Outlook will be imported.

• I go to a site, a new window opens, I am warned against a virus and sindou a # 1-855 = 232-1535 for instructions. Is - is this legitimate?

  I go to a site and do a search for an mp3 player. A new window opens and I get a recording of the voice tells me I have a virus and I need to call this number 1-855-232-1535 and I will be given instructions on how to to remove the virus or my personal information could be compromised... My antivirus can't find no viruses nor did my malware program. Is a warning and a number legitimate (I called and had someone who doesn't tell me just who the support she represented and was obviously, probably in India and Pakistan and also of course in a piece of phone). Any comments would be appreciated.nI running windows xp service pack 4 and FireFox 38

  Hi, probably the site it is a phishing site, forge, if you are looking for the virus and you are clean, if you want to check more then, you can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  https://www.Google.com/SafeBrowsing/report_phish/

  Thank you

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• After reinsalling firefox, I tried to transfer the info from old profile to new profile according to the instructions, but am unable to do so. I'm not computer literate

  Firefox crashed while refreshing but created a folder "old data of firefox. I have so I restarted and then deleted reinsalled firefox. I'd like to have my old favorites available have tried the info on help with copying the files between the profiles but does not seem to work. I can access the old and the new profile, but when I right click on Places.sqlite on the old profile and select copy, then there is no paste option on new file. I'm not computer literate and an ODP so would like to simple step by step instructions. Any help would be appreciated. Thank you.

  You can try to restore a .jsonlz4 compressed in the bookmarkbackups folder in the "Old data Firefox" folder on the desktop in the current profile.

  • Bookmarks > show all bookmarks > import and backup > restore > choose file
  • https://support.Mozilla.org/KB/restore-bookmarks-from-backup-or-move-them