Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

Similar Questions

• 3490CT: need instructions instalation for Suse 10

  Hey need instructions instalation for suse 10. got a CD-ROM with multimedia port replicator. HELP wanted

  Hello

  You know that Toshiba doesn't provide and support OS Linux on laptops.
  But I found this site from Toshiba:
  http://newsletter.toshiba-tro.de/main/

  Maybe you'll find some useful tips.

• need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  need drivers pci for toshiba satellite M45-S2653 running windows xp pro 2002 SP2

  Find it here:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product%20Support

  Good luck.

• DDR3 DDR3L vs for mid-2012 MacBook Pro 15 inch

  On crucial.com, I chose my system I, mid-2012 MacBook Pro 15 inches. I want to move to 8 GB of ram, but I want to know if their DDR3L will work. On their site it says DDR3 is 1.35 volts and the DDR3L is 1.35 volts as well. They are both the same speed, 1600. What is the difference between the two and the DDR3L will work? My current ram is DDR3 4 GB and the speed is 1600. Thank you.

  DDR3:

  CT4999407 http://www.crucial.com/USA/en/MacBook-Pro-%2813-inch-and-15-inch%2C-Mid-2012%29/

  DDR3L:

  CT3373649 http://www.crucial.com/USA/en/MacBook-Pro-%2813-inch-and-15-inch%2C-Mid-2012%29/

  On the site of crucial, characteristics of RAM that you have access to:

  "Standard DDR3 modules help Mac systems reached speeds up to 1600 MT/s.. For new systems, Mac, DDR3L modules are available. These modules offer speeds from 1866 MT/s and use 10% less energy to improve energy efficiency. "

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• RAM upgrade for mid-2012 MacBook Pro question?

  So, I bought some RAM Corsair (2 x 8 GB) to install in my MacBook Pro for mid-2012. It has been well over a month now and I get freezes and flaws that were not there when the Apple RAM stock has already been installed. My question is... are it freezes and the seeds one result of the brand of RAM I have installed (Corsair) or the fact that I am superior to the amount of 8 GB of RAM recommended for this laptop of Apple to the particular address?

  Thank you.

  As you can see here, your MBP can, indeed, support for 16 GB of RAM. However, DIMMs must meet Apple specifications which are often much more demanding that really meant DIMMS for PC can meet. One of the advantages of buying from OWC (in the link) is that they provide 100% support so their products need to be designed with the Mac in mind. If you have no problem with DIMM Apple, but you do with Corsair DIMMS, I would say getting them replaced or, better yet, to get a refund.

• Windows 10 audio drivers for Inspiron 17R SE (7720, mid-2012)

  Hello

  On the page of the product related to my Inspiron 17R laptop SE (7720, mid-2012) there is information that "Dell has tested this product to confirm that it can be upgraded to Windows 10.

  I installed Windwos 10 Pro x 64 bit that everything works well except audio.

  There is no driver to download from the download page for the Audio and subwoofer on my laptop does not work.

  Link to the driver download page: www.dell.com/.../advanced

  Could I get download link for compatible audio driver (IDT sound card), please

  Hey there,

  I had the same problem with my Dell.

  I just installed the driver available for Windows 8.1 (64-bit) and it works just as well.

  This method works if all goes well.

• Need some tips for first cs6 video editing

  I recorded it professionally in his room with a microphone mc proof is really good quality video and sound quality is perfect also.

  I recorded with 2 devices with different angles, I'll remove the noise of two video clips and use the MP3 recorded in Adobe Audition CS6 (amazing program) I want to have the 2nd recording angle put in the video so that it shows the main video, then the 2nd in a small box in the upper corner, how can I do this?

  Also any advice people can suggest for me on Speedgrade CS6 or After effects CS6 that will enhance the viewing experience will be highly appreciated.

  Last reading the thing at first and after effects is very slow, no failure of my laptop is extremely fast, but one thing that I've had this laptop for about 8 months and does not update the graphics card, it would be one or there at - it a way to solve this problem? When I try to playback in sequels it says something like ' 0.9 / 29 frames (not in real time), I downloaded quicktime, I thought it was real time?

  Thank you in advance

  I want to have the 2nd recording angle put in the video so that it shows the main video, then the 2nd in a small box in the upper corner, how can I do this?

  This is referred to as a PiP (Picture in Picture). It is easy to do. Simply place your Clips, camera 2 and camera 1 on separate video tracks. 2 camera spot on a weaker, you place the camera 1, say Camera 2 on 1 track video and camera 1 on video track 2. At that time, camera Clip 1 will cover the Clip on Camera 2. Now, with the camera 1 Clip selected, go to the effects (not the effects Panel) Panel and find the movement, one of the fixed effects. Watch twirl that open, to reveal the scale and Position. We will use these next. I would first pay scale, to resize the Clip and then position, move it to where you want. Fact.

  I often use the grids of the alignment for the positioning of the PiP, but with but a PiP, not sure you need this. Yet, see this article for grid alignment: http://forums.adobe.com/thread/476984?tstart=0

  For your Audio files, instead of a highly compressed MP3, I would export it as WAV/PCM 48 kHz 16-bit, for import in PrPro. The Audio will be better, and in accordance with the standard will be faster.

  For the rest, I highly suggest to read about these programs. Adobe has a lot of good tutorials on Adobe TV too. Their use and power, fill books. There is also a very active and very good forum just for After Effects, with a lot of seasoned, professional who can help you if you get lost. As Jon States, read everything in the help files, these programs are a very good start.

  Good luck

  Hunt

• Please, I need a tip for my lighter becames script. I want to use a single table.

  Hello.

  
  I would like to help to help me think

  I have a list of customers with their information (phone, address, email, name,...). There are about 120 customers.

  So I put a drop-down list where there are all the clients/names. When the user choose a name, it will change (on the same page, below the drop-down list object down) the selected customer information (e-mail, address, telephone, etc.).

  
  I had to do so using more than one table with the same name of the value selected in the drop down. For example: If the user selects a name with the same name of a table, this table will be your presence changed to visible. It works perfectly, but my form (in Design view) became slow much (why there are a lot of breast in a unique subform table).

  
  Can someone tells me if there is another way to do it using a simple and lightweight way

  NOTE: I use table, because in every piece of information, for example phone, I put a phone icon/image and also to keep all the information in one place.

  Is there an example here.

  

  If you look at the ScriptObject, I placed 4 information of different customers.

  When adding values to the drop-down list, I'm only using the Name value...

  At runtime, when the user selects one of the customer name in the drop-down list, then I need to pick up all the related information for the customer selected from the code of script object. To do this, I'm looping through all cstomers in the Script object and comparing the name value to find out whose name has been chosen.

  Once the code identifies the name is selected, then related information will fill in the other fields.

  I hope this helps...

  Thank you

  Srini

• material of memory reserved for the Win8.1 HP ENVY m6-1125dx Notebook PC problem

  
  

  Dear Miss,

  I have the solution. just intall 64 bit OS and see the magic.

• What is currently the best video card for mid 2012 Mac Pro?

  I have a videocard ATI Radeon HD 5770 in my Mac Pro, but I thought it is a 2009 vintage card and is not common for applications Adobe CC 2015.  What would be the current map for this will be the best performer for Premiere Pro and After Effects 2015CC apps?

  Read http://barefeats.com/imac5k7.html

• Need a driver for TOSHIBA SATELLITE 1620

  Please, I need a drivers for TOSHIBA SATELLITE 1620:
  Video: ATI3D-RAGE LT PRO
  Audio: CIRRUS LOGIC CS4281 AUDIO ACCELERATOR
  modem: ROCKWELL/CONEXANT SOFT MODEM K56

  or the image of the original CD.
  My e-mail is [email protected]

  Thank you

  Hi Milan

  The original CD image can be controlled only by the authorized service partner and cannot be downloaded. Drivers, tools and utilities can be downloaded from the download from Toshiba site.

  Good bye

• Well my MacBook Pro (13-inch, mid 2012) needs assistance.

  My Belkin mini display port HDMI adapter I think has a problem because I plugged on several macs different including Macbook Air (mid of 2012 13 INCHES) and a (Late 2011 MacBook pro) and a Mid 2012 Macbook pro (main computer) I plugged on all computers and it seemed to not work it has collapsed a week ago from work and hasn't worked since can you please get some food thank you rear

  Hello morganscott2001,

  Thank you for using communities of Apple Support.

  If I understand your post you have a Belkin Adapter Mini DisplayPort to HDMI is not working through any of your Mac.  Given that this is happening with several devices, then it is safe to say that there is probably a problem with the cable itself.  You can see similar cables we offer in the Apple Online Store in the link below:

  Mini DisplayPort to HDMI adapter

  Have a good.

• Can I physically transfer an SSD of a 2007 end for a 2012 Middle pro macbook macbook

  Hi all

  I have a very specific question and would appreciate your advice.

  I am currently using a macbook polycarbonate end 2007. It works great and I like it but it is limited, given that the latest operating system, it can be run is 10.7. So today I bought a macbook pro 2012 environment so I can use the latest OS.

  My 2007 macbook has an SSD that I installed a few years ago and I want to physically in the 2012 MacBook pro. its not only faster but there all my files already installed etc. that would be the easiest migration option! Once transferred, then I could update to 10.11.

  However I have a few questions/concerns:

  1. I can actually do what I suggested? the new macbook 2012 even light up with a hard drive that has been formatted in a 2007 macbook which has a different logic board etc.

  2. even if it lights will there be in the files/system process that does not work correctly or not be effective due to this move?

  3. If I download and install 10.11 after the transfer is it re - write these system files, which mitigates my concern at question 2?

  4. is there anything else that I didn't put my macbook pro and/or data at risk?

  I know that as a plan B, I could erase the SSD drive and do a 10.11 fresh install the macbook 2012 then do a restore from time machine to get the data, but it just does not feel added value in my simplistic view of the world. Any advice that anyone can offer would be greatly appreciated!

  Thank you very much in advance for your time and help!

  Chris

  Since the mid-2012 Macbook Pro originally supplied with Lion 10.7 also long the SSD is updated to the latest version of 10.7 that it will work. Physically, the disks are identical. As with any ipgrade you should always make a backup before you start.

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe