Similar Questions

• How can I put an internal link in my form (e.g. click on goto page 3)

  How can I put an internal link in my form.  I would like to add a button to my form (or image) that when you click on will take the user to a specific page in my form.

  To access a specific page, you can use

  xfa.host.currentPage = '3 '.

  Remember that the page numbering starts at 0 not 1.

  If number 3 will take you to page 4 for example.

• Internal link problems

  Hi, hope someone can help because I'm a bit stuck.

  I designed a form in Adobe Designer 7 which has internal links that jumps the user to a section of the form to another according to their answer to a question.

  These links work fine in Adobe Acrobat 7 Professional, but I can't seem to work in reader regardless of the version. No error message... all in all, nothing happens when they are clicked.

  The code behind the radio button is xfa.host.setFocus("form1.page6.textlink1") where form1 = the name of the form, the links and the textlink1 landing page = page = the specific destination.

  Any help at all would be greatly appreciated.

  Kind regards

  Stephen.

  For the benefit of third parties as a result of this post. The issue was that the location of the target where the link was intended has been set as invisible. This means that the field is not part of the layout but is a valid field. The expression was beautiful (the field is a valid field), but because the cursor could not be placed in a field displayed, it wouldn't move. Make the visible field, make sure that there is no legend, and no appearance, then check the field 1 point per 1 point. This will make the field virtually invisible to the user and still usable by the command.

  Paul

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.

• problems with internal links Amazon... Safari not responding

  I installed El Capitan... Safari opens fine but when I go to Amazon and go to a link, it goes to this page and it freezes... I have reloaded the OS and still have questions... java script to audit of the United Nations security without success... UN-check 'include suggestions for Safari' in the search... I even deleted the history and deleted the cache... with all this, I always go to Amazon and use the internal link for product and Safari answers... it started with I upgraded to El Capitan... Can someone help me?  Thank you

  Please see the comment of carefulowner , in this discussion.

• How to check the links and buttons of enamel are traceable? If I send the email through Eloqua?

  I sent you an email through Eloqua. I don't know how to check the links and buttons are traceable?

  Hi Lucie,.

  There are 3 ways to check your links and buttons are traceable or not:

  1. When you mouse pass the link or button it will not display the actual URL. It will show you a few encrypted URL which will redirect you to the actual URL.

  2. connect to the eloqua account and search your email. When your email open ups click setting ICON and then click on manage links. All the links and URL of the button should be checked.

  3. If you want to check at the level of the code make sure after all the links and buttons URL "elqtrack = true" must be written.

  Hope this will help...

  Thank you

• Normal (internal) link to external site opens in Safari on iOS after upgrade to cli - 6.0.0

  I just tested this again with a recompilation; It still does not work...

  My app has a normal link, (a href), to an external site, which should open in the application itself. This works very well in Android. But in the iOS, it opens externally in Safari when it is compiled with cli - 6.0.0. Compiled with cli - 5.2.0 that it opens in the app, no problem. I have the plugin added whitelist and origin allow browsing, attempts to authorize and access are all set to *.

  So I think it's a bug.

  See also: -in-safari-on-ios-after-upgrade-to-cli-6-0-0 http://community.phonegap.com/nitobi/topics/normal-internal-link-to-external-website-opens

  Found!

  After being pointed in the right direction on Jira... it was the attempts to authorize that causes this behavior.

  Using

  or leave this entire string out of the config, causes an iOS open safari.

  However, by using the following in the config works correctly:

  And I thought using the * would be the easy way to configure this :-)

  Hope this helps someone else with the same problem.

• How can I change the internal links to https in muse?

  I want to add a zertificate of ssl on my site. How can I change the internal links to the muse in https?

  Look here:

  

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• Internal linking in PNG?

  Hello

  Is it possible to create a PNG image in Photoshop which has internal links? Which means, to set anchors and links in the Photoshop file? I do computer graphics and there are three sections above the other, and it would be groovy to add a table of contents at the top so that users can skip to the section that interest them.

  Thank you.

  Hi BehageOgTak ,

  Thanks for the reply.

  Somehow, it is in fact not possible in Photoshop.

  Concerning

  Jitendra

• How do I link a button om Page 0 for another "Page" or another "button on a different Page?

  I created a 6 (0-> 5) from the page menu.   Page 0 and 1 are the main pages, and each has several buttons.   I put one next and previous on each and it works well.  After I link a button on Page 0 to Page 3-button, it does not run when I test it in preview.   What I am doing wrong?  It seems so straight forward, so I must be missing something obvious.

  I still use & Photoshop CS5.5

  Thanks in advance for your thoughts and comments.

  Duane

  Find similar key or the "print screen" on your keyboard.

  On some keyboards, you simply press the "Print screen" button  On others, you may need to add a modifier (Alt, CTRL, etc) before

  pressing PRTSCN.

  Photshop open; Create a new image, using our screen size. Press Ctrl-V (or edit, paste).  If you used the right

  Print screen option, it will stick your screenshot in.  If this isn't the case, return to the screen you want and try another option.

  Reframe your screencapture as needed. File type-> save under and make the jpeg file.

  During a post in the forum, you will see an icon "camera".  Click on that and it will leave you to insert the image.

• Toolbar made style: link has buttons.

  Hello

  
  

  I fail to show a link made according to a pseudo-class using those link has buttons. Any help?
  
  All the best.
  

  Since you seem to have a sample page to look at, do it backwards.

  Create a test page in Dreamweaver. Add this code inside the body (in Code view):

  
   

  Fubar links

  
   

  Nulla facilisi.

  
   

  Curabitur quam.

  
  

  Add this stylesheet in the head of your page:

  Now in Design mode, click on the ": h" icon on the toolbar of style for rendering. If you have followed the instructions, your links the two will turn red. If you need assistance, you really must post a link to a test page to your web server.

  --
  Al Sparber - PVII
  http://www.Projectseven.com
  The finest Menus Dreamweaver | Galleries | Widgets

  Since 1998

• Link a button in flash for a dreamweaver site

  I am having trouble linking a button in my flash of a separate dreamweaver site animation. The flash animation will be placed in

  the homepage of a website and I want to be able to click on a button to go to a separate page. try the code I have is:

  RF1.addEventListener(MouseEvent.CLICK,clickHandler); 
  function clickHandler(event:MouseEvent):void{ 
  navigateToURL(new URLRequest("http://Bleachers_Top.html")); 
  } 
  

  where RF1 is my button and my is "Bleachers_Top.html of page target"

  I'm sure that the last part is not true, but I can't seem to find any help on how to do it.

  I get this error when I try, does it mean that it is an error of installation of flash player in this case - that someone knows another way to do this because I don't want to have to change their Flash security options when they see it.

  

  Thanks in advance

  Blanched Andrew

  Same code, just a relative url...

  navigateToURL (new URLRequest ("Bleachers_Top.html"));

• Link a button to a .swf file

  Hello
  I did a "Film1" button and I want to start a file .swf on the same page, when I click on this button.
  How to link this button to the file named movie "myMovie.
  Thank you
  

  It is not possible for the movie to load, if you do not give the SWFLoader file name until the button is clicked:

  
  
  
  
  Loader.Load ("MyMovie.swf");