Code 19. My CD/DVD readers does not
Code 19. My CD/DVD readers used to work properly. After that some windows updates, my CD/DVD drive is not listed or recognized. I tried the Auto Fix It utility, but always by car is not recognized. Help, please.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
On Satellite L500D DVD player does not work - Code 39
my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new
read here:
http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm
-
Burning DVD disc does not not - D:------. Is not Accessible and error Code 2130932483
My Windows XP system has been recently updated, and now the Sony DVD burner does not work. When I insert a blank disc "is not accessible D:\". "appears. Program "Error Code 2130932483" appears if I run a DVD burning. If I put the DVD burned in the drive he acknowledges. I went through the program Microsoft Fix It and all it came with was the drive is not capable of burning and suggested adding a program of writing (or something like that). Other discussions, I looked online proposed something on the old drivers or updated burning software, but I'm lost. Would be very happy for any help I can get. Thank you! BTW, the drive is a SONY DVD RW DW-U12A
Hi Martin Johns,.
Method 1
The article below and run them the fixit tool available, check if it works.
If the tool fixit does not solve the problem, try the manual comes in the article.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Also see the Microsoft article and check below if it can help.
How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
http://support.Microsoft.com/kb/324129
Method 2
If the previous step fails, then uninstall all DVD burning software from third-party manufacturers installed on the computer and check if it helps.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
Method 3
If the previous step fails, then you need to update the firmware of the player using the link below.
-
CD DVD drive does not. Error code 10. Microsoft It planned is "fix.
CD DVD rom does not. Listed in Device Manager, with yellow warning sign, and when clicked, says Error Code 10. Running Vista Edition Home Premium
Description of errors related to the 10 Code that generates the Device Manager in Windows on computershttp://support.Microsoft.com/kb/943104Try the resolution on the following link:The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vistahttp://support.Microsoft.com/kb/929461Also seethis discussion:FixIt did not work the first timehttp://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-write-to-DVD-drive-Windows-Vista/791d88ac-73b2-48da-a18c-723c0b08a587 -
CD DVD drive does not recognize inserted the disc: Code 19
Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline
Hello
Here are a few articles that will probably solve your problem.
Your CD or DVD drive is missing or is not recognized by Windows or other programshttp://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Mark <> Microsoft Partner
-
My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time. Every now and then it will be visible and I can use it but 90% of the time it does not exist. I tried the regedit fix, nothing. I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM. I removed, cleaned and reinserted my DVD/ROM drive, but no difference. I tried everything, except the upgrade to Windows 7... who will be my last resort.
Hello gargoyle28m,
If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
DVD player does not work error code 36 please help
I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36
Hello
In addition to the BIOS settings the player himself could have problems.
-------------
This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
Please use the computer's system setup program to reconfigure the interrupt for this device.
(Code 36)Interrupt request (IRQ) translation failed.
Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.
On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.
--------------------------------
Check with Toshiba support
Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspToshiba - Forums
http://laptopforums.Toshiba.com/===========
If you have problems after checking the BIOS settings:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please make all underneath the same if you've done it before as it's often the total of the process which
solves
the question.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.Normally the above will solve this problem if not work your way down through them, even if you
done before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.--------------------------------------------------------------------------------------
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Mat * one years (uj-840) DVD player does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
I hope this article can help you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm
Check it out! -
Satellite L755 - CD/DVD drive does not
I own Satellite L755 and the dvd rom does not work (do not read disks and show on the disks in the computer).
When I go into the Device Manager in windows it displays error code: 39 which means that the driver is defective.
It is not the first time its happening.
It happens after a few months and I need to back up and do the system recovery each time.Is there a way to fix this without making the system recovery each time?
Hello
Try this workaround:
Go to Device Manager and remove the CD/DVD drive entry (mark and press DELETE)
Then start the registry and remove the filters above and below the following key:
HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class------{4D36E965-E325-11CE-BFC1-08002BE10318}
It may be useful
-
DVD player does not accept disks
My '' integrated '' DVD player does not read the disc (DVD, BluRay, any region code), but it ejects after a small delay of about 1 to 2 minutes. Is there a diagnostic software to find the problem?
Your Super Drive never read blu ray and probably did not. Try a cleaning disc. Try resetting the memory NVRAM How to reset NVRAM on your Mac - Apple Support and SMC reset management system (SCM) controller on your Mac - Apple Support
Finally buy and inexpensive external optical drive, but not apples Super USB drive because it does not work with your Mac.
-
Satellite A200 - 23P - mechanic of DVD - rom does not
I'm sorry for my English in advance this topic! -Thank you
I have a very big problem with my engraver of DVD (RM).
I bought SAT A200 - 23P three weeks ago.
The Win VISTA operating system has been installed. DVD - rom worked well.If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.
Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.However, if I have installed XP on the second partition, Win Vista does not load :(
I don't have a second chance for second selection (Vista and XP).
I now have XP only, even if Vista is on the first partition - I didn't delete it.Do you think that the DVD-rom is HW or SW problem?
I think that, given that the DVD-rom does not in the BIOS - HW error.But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)
If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).
PLS help me someone-
Thank you!
Hi Michal
Your question is very strange, I mean the number of CD/DVD drive
The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.
So I wonder why the eject button works with Vista and not XP preinstalled OS? :|
My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too
As you see it s not easy to say what's wrong exactly, we can only speculate.
Now some details about your installation of OS double.
You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
This happened to me also. I installed Win XP on my Satellite and could not start Vista.The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.
Then I downloaded the tool called Easy BCD.
This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.That s it!
-
Satellite A100-447 - DVD player does not read some discs
Hello
I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.
The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.
Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.
What can I do?
Thanks for your help.
AdamHello
You can do the follwowing:
Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,
Download the latest update of the firmware for this drive, install it, and then try again.
Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.
Welcome them
-
It won't read a DVD. It will not read ANY CD or DVD. I tried 12 different CD/DVD. This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it. I had added Nero. I removed Nero. I did all the updates. I have not released the driver and reinstalled. He claims to have the latest driver software, but it won't work. The computer can see the CD/DVD, but he calls it a 'CDROM '. It is not the case. It is a DVD/Cd-RW with Labelflash.
I did everything suggested that past discussions. I ran FIXIT program that claims that the drive works properly. It is not the case.
I tried to get various programs to recognize. They cannot see the installed media.
I uninstalled iTunes.
Please do not give me the answer of cut-and - paste stock; It does not work.
Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.
Thank you.
Hello
Well, if you have tried all the usual bugs try this:
Make a Restore Point:
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
------------------------------------------------Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
continue.Reset.
Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
could be at stake.=====================================
Here's the answer, just in case there is something you don't have, and I start up and down.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable
or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===========================================
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
CD-ROM/DVD-ROM does not.
Driver software has had a problem when he tried to run. Code 39 problem.
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Facebook for Photos Contact synchronization
Given that I have updated to iOS 10, all conversations of Messages displays the contact photo. Ideally, I'd like to move this back just displaying their name; the photo and the name together are too cluttered. But I have not found a solution to this
-
I had this about 2 weeks ago, but don't remember how I got it, it came with the download of 7.0 I think.
-
Cannot configure USB2 on Satellite Pro A10
Hello I just inherited an A10... I replaced the HD and install a new copy of XP Pro... from as many pilots as possible here. everything is good except that if I plug a USB2 key I get a message saying a device high-speed is plugged into an outlet non-
-
Display of shimmering red with Toshiba Portege S100
HelloAfter doing a few partition with partition magic, I returned to find that she had been unable to boot into windows and had a red screen now.Restart in windows, I could get however now parts of the screen has a red screen (usually in black or blu
-
I would like to know how to compress images once uploaded from a mobile phone or digital camera
Example: The Dimensions 2592 x 3456 size 3, 49MO. I want to make this small!