Internet does not work in the comments (oracle Linux)

Hello

I have a Windows 8 Host and on VMWare, I installed oracle Linux as a guest, I am not able to access the internet under this comments of Linux machine.

Note, I have access to internet in the host and I am able to access without any problem. And I have another computer invited under the same VM but it is windows xp and I can't access the internet.

Internet is not able to access Linux comments!, I checked the firewall for Linux, it is disabled.

Appreciate your help with this.

Thank you

AB

You did not first louyo 'NAT or Bridged?' question but its context was not perhaps not clear even if, after seeing...

[root@test-host ~] # ifconfig

eth0 Link encap HWaddr 00: 0C: 29:55:EF:96

INET addr:192.168.241.0 Bcast:192.168.241.255 mask: 255.255.255.0

RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

It is not really important because despite everything, it is patently obvious what is the main problem!

The IP address of the guest operating system is not set properly!

louyo asked 'NAT or Bridged?', meaning is card virtual machine network configured as a 'NAT or Bridged?' if it has been filled, the guest operating system would have an IP address on the 192.168.0.0 subnet IP and as NAT would have an IP address on the 192.168.62.0 IP subnet.

Configure the guest operating system to use DHCP or manually assign a correct IP address while setting the virtual machine Network Adapter is connected by a bridge or a NAT.  Since the host uses a Wi - Fi connection, I suggest using NAT and if manually assign an IP address must be between 192.168.62.3 and 192.168.62.127, as that is beyond the scope of the DHCP Server VMnet8 IP address Pool.  If you choose to use Bridged can use DHCP in the guest operating system or using an IP address that is outside the scope of the routers IP DHCP Server Address Pool and for that, you need to check the Configuration of the router.

You didn't say which VMware product or version you are using however I strongly suggest you read the documentation and specifically Chapter 5 "Configuring network connections" in Using VMware Workstation (PDF file).

Tags: VMware

Similar Questions

  • My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

    I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

    Thank you!

    Hi SmilingDaddy

    Here are a couple of things to try. Here I am assuming you are using a wireless router?

    Open system preferences > network

    The name of your network appears in "network name"?

    Click on the button "Advanced...". »

    In the WiFi list, make sure that your preferred network is at the top of the list.

    Click on the TCP/IP tab and click on 'Renew DHCP lease'

    Now you have Internet?

    Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

    If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

    Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

    Hope this helps, Greg

  • Internet does not work after the installation of updates

    From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

    Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

    NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

    If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

    Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

    If you install a security update & have a problem...
    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • B2B - BAM integration does not work with the Oracle XE database

    Hello

    Can someone explain the reasons in detail, 'the B2B - BAM integration does not work with the database Oracle XE'?

    Can't we use XE POC simple to demonstrate BAM?

    Published by: 975946 on December 27, 2012 04:14

    Hi Nithin,

    The main reason for this Oracle XE database can't handle such a huge process. Same Oracle XE is not supported in production.
    Note that SOA requires 300 process and BAM more than 100 processes (400 total), which is in addition to any other requirement its 500 to parameter.but process during the installation of Oracle SOA RCU, I hope you gave 300 single right.so his can't handle as much load if use B2B BAM integration.

    The ultimate goal is to have need to display active data in the right BAM reports? so, if you are using Oracle XE DB its may be not possible to show the active data.that the reason Oracle recommended use / works with Oracle 10 g Oracle 11 g versions EE and EE.

    Best regards
    Siva San.

  • BlackBerry Smartphones Internet does not work in CAPE VERDE on Black Berry

    Hello

    I don't know why, but the internet does not work with the mobile operator in Cape Verde, but works with a wi - fi connection.

    The internet provider said that they cannot set up internet for black berries.

    Ialso can not install Viber, because the world of blackberry doesn't work here...

    Thanks for your help

    Hello and welcome to the community!

    Please clarify... temporarily traveling there or you live there? If you are traveling temporarily, you use your home SIM or a local SIM?

    If you use a local SIM card, then the answer is perhaps that it is just not possible. Each carrier must choose whether they will support devices BB... If the carrier chooses not to, there is nothing you can do. BBs legacy force the carrier to specifically support BBs, so that your model BB specific number... If they do not, so it's nothing that you can do (well, you can get a device BB10, who does not have this requirement).

    Good luck!

  • Why ERP login does not work in the same host?

    Hello
    I installed 5 OEL and Oracle ERP 12.0.4. Everything went smoothly, all services are up & running and capable of connection/working from a remote computer on the network using microsoft xp. Why don't ERP login page does not work in the same host (linux server) using Mozilla Firefox? I missed extra configuration?

    Concerning

    Hello

    You go head with the downloaded version. It will work Fine.

    Thank you
    Yakub.

    Published by: 900856 on November 27, 2012 12:58 AM

  • can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

    Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

    Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

    I found this in another thread that you created [*]:

    I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

    I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

  • Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

    netBT.sys replacement files viruses

    Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

    Thanks in advance

    Hi DonMendigo,

    Follow the suggestions below for a possible solution:

    Method 1: Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Startand type cmd in the box start the search.

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompts, the following line and press ENTER:

    sfc/scannow

    See also:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

     

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

     

    Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

    Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

    http://support.Microsoft.com/kb/307164

     

    I hope this helps.

  • Internet does not work most of the time

    I had a problem with my internet connection for about a month now.  I spoke with our internet service provider, and they don't know what the problem is.  Sometimes I was able to connect, but when I do it, the internet is very slow.  Someone at - it ideas?

    Win XP Home Edition

    With the help of Google Chrome (IE I tried, does not work or the other)

    I suggest that you try here and say what your result and how it compares to your expectations.

    http://www.myaccount.Charter.com/customers/support.aspx?SupportArticleID=2098

    Hope this helps, Gerry Cornell

  • Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

    Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

    http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • Internet does not work on Windows 7, no drivers for the Wifi and LAN

    Original title: Windows 7

    I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

    Well, as my readers usb and touch screen no longer work.

    You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

    If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

    Reinstall Windows 8.

  • My driver support does not work all the time, won't let me connect, keeps losing internet connection.

    * Original title: SUPPORT of the PILOTS LOSE INTERNET.

    My driver support does not work all the time, won't let me connect, keeps losing internet connection.

    What do you mean by "driver support?

    If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

    The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

    Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

  • Acorn TV does not work on the new Apple TV

    So disappointed that the Acorn TV app does not work with the new Apple TV we just bought. We have subscribed on iTunes and nothing happens when you try to activate the software. We can look good on the MacBook, iPad and iPhone. Verified the purchase on iTunes account and that's fine. Contact Acorn and say it is a matter of Apple.

    Strange that I have to use Chrome to even write this question. Safari and hers do not work with the Support pages. I'll send in the comments.

    I'm resetting Apple TV now. We have been with the Apple TV since version 1. I hope that we can make this work!

    How would work appletv mount 1 app on the job?

    each app to live their own lives the appletv core do not even know what applications do they just

    Use the ios network to get their content

  • Shortcut Ctrl C does not work in the main window of Firefox

    I use Firefox version 38.0.5, Windows 7
    Since the update Ctrl + C shortcut does not work in the main window of Firefox. (I can't copy text from any website using Ctrl + C).

    Click right and using the copy in the menu works perfectly. CTRL V and Ctrl X work fine without problem.

    Ctrl C works fine when copying text from the address bar and search bar, I just can't copy anything from anything in the main window of firefox.
    

    I tried to run Firefox in safe mode, I have also reset firefox and a virus scanner, but nothing has solved the problem.

    If anyone has any suggestions, that would be great. Thank you

    See:

    • bug 1173979 - copy Ctrl + C is broken in the last Irish FF 38.0.5

    Please, do not comment in bug reports
    https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

  • Safari does not work in the iOS on ipad 2 and 4 9.3.1

    Safari does not work in the iOS on ipad 2 and 4 9.3.1

    Assuming that other internet such as connectivity features

    E-mail

    YouTube app

    Music streaming

    works very well

    Settings - Safari - erase data and history of the site

    Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

    Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

Maybe you are looking for

  • iTunes 12.3.3.17 seems to have broken Airplay?

    Since the upgrade to 12.3.3.17, I can connect is no longer two powered speakers B & W systems.  The speakers are connected via ethernet cables and an airport.  I tried to restart the airport and checked the cables without result.  Grateful for any su

  • Soft full keyboard and zoom mode?

    Hello community, I received my new iPad pro yesterday, it's on iOS 9.2.1. I need glasses, like the ability to zoom the screen. However, I also like the new comp complete the software keyboard, which allows complex code such as html, necessary in some

  • Transfer software

    I would like to transfer myDAQ also from one computer to the other. I guess that there is a way to uninstall it before installing the new over the old. Is this true? drovner

  • HP Pavilion x 360 n014na: HP Pavilion x 360 n014na touch screen not working not not after installing Windows 8.1

    Please help, I'm desperate.  I searched for weeks without any solution.  I have a HP Pavilion x 360 n014na, when I bought it I installed Linux immediately and have been using it this way without problem. However, I decided that I wanted to go back to

  • XP SP3 start failed

    Hello I use XP with SP3 on a laptop Fujitsu Siemens who never gave no problem - until today. While booting, the screen with the "XP" logo and the fast-moving progress bar has several broken lines yellow (better described as the walrus-like code) that