Internet links cannot be opened
Hello
I have an iPhone 5, IOS 9.3, and today I found that when I open Safari, and by clicking on a web link, it does not open.
Thank you for your advice
bad news = Troubleshooting update iOS 9.3 problems
Tags: iPhone
Similar Questions
-
Original title: problem e mail
I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.
Suggestions;
1. make sure that your e-mail program is your default program.
2. make sure that your Internet Explorer, or your main browser has all its faults.
You can do both of the above by following these steps...
Start button > right column, click default programs > click Set Your Default programs...
1. click on your e-mail program > it doesn't say "this program has all its defaults"?
If not, click on choose by default for this program > check all boxes below the list > click on save when finished.2 do the same as above for your Internet Explorer, or your main browser.
-
Fixed HP laptop bios update has disabled the option to open all the apps. Simple BUT frustrating built-in Administrator fascist authoritarian East
Hi Dean,
Built-in Administrator account does not have a split token and metro apps may not work under full administrator token. So metro apps cannot be turned on with the built-in Administrator account.
I recommend you create a new user account to access the User Interface modern apps.
Check out the following link to create a normal administrator user account.
Which user account is right for me?
http://Windows.Microsoft.com/en-us/Windows-8/which-user-account-for-meCreate a user account:
http://Windows.Microsoft.com/en-us/Windows-8/create-user-accountHope the information is useful. If you have any other questions, answer here and we will be happy to help you.
-
Internet Explorer cannot display webpage then on the internet by clicking on a link on a Web page
When you are connected to the internet, I can't click links on a Web site. Clicking on makes me an error "Internet Explorer cannot display the webpage". For example, I'm on FamilyFun.com I try to print a page coloring for my daughter. I choose the one she wants, but when I click on 'see full size and print it' I get the error message. I tried disabaling the modules and software McAfee and install IE9. None of these works.
Hello
You can not view, access, or load some Web pages in Internet Explorer 8 or
Internet Explorer 9
http://support.Microsoft.com/kb/967897You can not view, access, or load some Web pages in Internet Explorer 8 and Internet Explorer 9
http://support.Microsoft.com/kb/956196/en-us--------------------------------------------------------------------------------------------------------------------------
Internet Explorer freezes or crashes
http://support.Microsoft.com/GP/ie_freezes_or_crashesTips for solving problems with Internet Explorer
http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-ExplorerWhen you start Internet Explorer, it opens, flashes and then closes immediately
http://support.Microsoft.com/kb/967896------------------------------------------
Several troubleshooting methods:
What antivirus/antispyware/security products do you have on the machine? Be one you have
EVER had on this machine, including those you have uninstalled (they leave leftovers behind which)
may cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java
installs and it causes more questions - have you never update Java to go back in and turn it off again.) Search
other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look
right. Allowed are usually OK and "unauthorized" are not always bad. If doubt about a program
ask about it here.Could not be a free - SpyBHOremover - BHO - standalone program, needs no installation, download.
unzip and run - all are not bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpHow to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlHow to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
For Vista:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------------------
For Windows 7:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlI hope this helps.
-
Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.
I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.
-
Original title: C:\windows\system32\icacls.exe
For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection. Whenever I do; try to download something or download something, I get the following error:WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.
C:\windows\system32\icacls\exeI have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.
Any suggestions? I really need to download Trend Micro.
Thank you
AmySee the article below:
ID of the KB Article: 2588679.Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."Check the following settings:
Right-click on the downloaded file. Select Properties.
Click the Unlock button.Check the suggestions the following threads:
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826Let us know if that helps.
-
my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.
Hello
1. are you able to use with other applications that connect to the Internet?
2. when exactly you get this error message?
3. should we come up with any specific Web site?
4. what version of Internet Explore do you use?
5. don't you make changes to the computer until the problem occurred?
6. the problem occurs in safe mode with networking?
I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:
How to optimize Internet Explorer:
http://support.Microsoft.com/kb/936213/no
Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.
For your reference: Internet Explorer could not open the Search Page. http://support.Microsoft.com/kb/219004
Hope this information is useful.
-
Internet Explorer cannot open a SPECIFIC Web site, or I can't open with Firefox
I can't open a website with Internet Explorer (or Firefox, by the way)...
Internet Explorer cannot display this webpage Thanks for your help.
What is the site? After the URL.
-
Cannot use Picasa get message Internet Explorer cannot open the program
Original title: Picasa & gmail.
Picasa - I can use the program to import images, editing, downloads of albums, etc., and I used to be able to send the album to some of my
contacts. ALSO - I used to be able to look at Picasa albums sent me to display... NOW - I GET A MESSAGE THAT THE INTERNET EXPLORER
UNABLE TO OPEN THE PROGRAM. I changed a few settiings - any thoughts - I use BING should I change chrome?
In addition to HOt MAIL account, I also have a Verizon account and a GMail account. I can access all three accounts - however - WITH gmAIL
I can send & receive - but can not get on my gmail homepage... Ideas on this subject.
Thanks for your help
Isadore salvation,
Welcome to the Microsoft community!
You cannot use Picasa get message that Internet Explorer can not open the program.
The question is perhaps because of settings or firewall.
I suggest you to refer to the procedure described in the site:
Download Troubleshooting
Important note: firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Adobe sent me an email with CS5 download for me to reinstall it on my computer because my adobe updates have not updated. I uninstalled fires Fireworks and then used email from Adobe to reinstall and when I tried the installation it I received an alert that says "'Install' is corrupted and cannot be opened. You must eject the disk image. "I'm trying to install the program in the email I was sent, so I have no disk in my computer to eject. Why that's coming up? I tried again with Flash to see if the alert is ups.
Help!
See the link below:
-
I have a frame of the file which worked fine before CC today updated to 2015 of Illustrator.
I use FrameMaker 11.
My .doc file includes a linked object (.ai file, created using Illustrator CC 2014).
My (Windows) file associations have files .ai configurΘ for dΘmarrer with Illustrator CC 2014.
In Windows Explorer, I copied the .ai file linked to a different name (make a Variant).
Then in frame, tried to insert the object by browsing to it and then choosing 'link '.
After a break for awhile, an Adobe Illustrator dialog box appeared:
"The file 'foobar.ai' is in an unknown format and cannot be opened."Clicked OK, then began and the CC2015 file.
Resaved the file CC2015, tried, same question.
Tried to insert the * original * file (which is already inserted in another point in the doc), same problem.
In the framework, if I double-click on the * original * linked object, it starts CC * 2014 * and opens the file.
Then... nutshell version:
Since Illustrator CC 2015 loaded this morning, I can't introduce any .ai objects in my FrameMaker docs (including the objects currently inserted elsewhere in the doc). I can even * open * objects that are currently linked in the file (they open with CC2014).
Is there something I need to do, or do I just uninstall Illustrator 2015 for now?
jaggedpeak,
You can try changing the file associated with the CC 2015; You can always reset.
There are some strange things going on, and some have decided to go back to CC, 2014.
I hope someone at our friends at Adobe staff there see you soon.
Someone?
-
Internet links on the Admin Page not by train to open in a new browser tab
Hello
For some reason any clicking / opening on weblinks no longer opens the link in a new tab on my browser for applications and the community, the link works, but opens in the tab of the Admin Page I launch go.
No changes have been made to my browser, I use 6.6.0 - T95 on my Pro 4
Really annoying, all ideas welcome
My apologies, it was a matter of Firefox, not Readynas Admin, which I solved it now
-
"Internet Explorer cannot display webpage"
Hello
I have a laptop computer with IE version7.0.6001.18226 in an OS with Vista Home Basic 32-bit.
When I open IE, I get the message "Internet Explorer cannot display webpage".
I have troubleshooted with my ISP and the other links on the Internet (via another computer).
-power and route it (wireless)
-Reset default settings in internet options
-delete all the temporary files, cookies, history
-Uninstall and reinstall network adapter
-Disable addons
-uninstalled the AVG free version (although never caused problems before)
-Started in safe mode, but nothing helped.
This laptop IS connected, as I Pinged Google and got 4 responses, as well, my Limewire has to complete connectivity.
It just seems that IE is faulty in some way.
Please advise,
much appreciated!
VP LP
PS... This is an ACER laptop...
Thanks for your help... I ended up taking in to get fixed... the guy said that it is something to do with some registry keys and possible malware.
IE now works. Thanks again.
Published by vista lp on 14/05/2009 14:58 -
Internet Explorer cannot display this webpage
Internet Explorer cannot display this webpage, it is my problem. as a side note, I can use OE and play games online without any problem. On the same computer with a 'new' profile, I can navigate without problem but cannot use OE or OUTLOOK, I am running XP Pro service pack 3 with MS Security Essentials and Malwarebytes on a daily analysis. I reset IE8, (that is to say, options, advanced, reset) I ran the BHO Remover which is so widely recommended here on the forums without any problem. I ran sfc/scannow as admin also ipconfig/flushdns nbtstat nbtstat - RR netsh int reset r all netsh int ip reset netsh winsock reset deleted browsing history and made sure that doubling that all cookies are gone. Ran disk cleanup, then everything is represented. Still having the same problem after a 1 successful logon and browsing session. Suggestions out side of the nuclear option of reformatting and reinstalling?
Assuming that all is well in the new user account, it can be easier to copy the data from the old to the new user account, and then delete the old.
How to copy data from a corrupted to a new profile in Windows XP user profile
http://support.Microsoft.com/?kbid=811151Alternatively, you can open a free support case by clicking on the link "Submit a case support" on this page: http://www.microsoft.com/security_essentials/support.aspx ... and then clicking on 'Submit a support case online' on the next page.
PS: any particular reason you use OE and OL?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I followed a blogspot for a year or two. Just in the last week, internet exployer began to interrupt the site. The box of
says "Internet Exployer cannot open this site. Abandoned operation. Then the blog disappears from the display.
Hello
There are a lot of steps to try it in the link below for internet trouble explorerproblems run a 'fix - it '.
You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
http://support.Microsoft.com/kb/956196
If it's neither solve repost things in internet forums explore the link below
http://answers.Microsoft.com/en-us/IE
When it worked properly, but the chances may be slim to fix this way, you can try a system restore to
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Maybe you are looking for
-
What is the best backup software for El Capitan?
I have a Mac Book Pro (mid-2015) with El Capitan... What is the best available backup system? Ideas?Thank you!
-
Original title: Aero Yes please
-
Need to update Windows Vista Ultimate Edition of Windows Vista Service Pack 2
Original title: I SPILLED chocolate milk ON MY WINDOWS VISTA COMPUTER! Yesterday, I spilled milk on my Windows Vista Ultimate 32-bit computer! It has no service pack and I need to upgrade to Windows Vista Ultimate SP2! My dad installed Java and it wa
-
EULA.RTF files can be deleted?
I have 30 of these files and want to remove them and just leave them alone. I got the error as the eula.rtf file cannot be deleted. Does anyone have a solution?
-
I'm trying to install Adobe Flash Player on my Android phone - no luck.
I'm trying to install Adobe Flash Player on my Android phone, but it keeps telling me that my antivirus software prevents it. I tried to uninstall my AVSW temporarily but it would not yet allow me to download. My phone is under Linux 64.Thanks for an