Interrupt the interrogation of the drive - acer lappy

Similar Questions

• installation of the driver Imation superdisk120 (LONG)

  Under XP, service pack 2 and not connected to the internet. The Imation SuperDisk is parallel port model not a USB device.  It plugs into the printer port connector.

  Eager to recover an old file off a Superdisk Imation 120 I tried to connect the drive to the old computer, where it was once installed.  Drive was not working so I uninstalled and installed again since the original Imation disk.

  The installation seems to work and the display the message says that it has been installed successfully.  But when I try to use the PC hangs.  The device is not correctly displayed on the Explorer window - it says "diskette of 3 1/2 (b)" if I do a forced shutdown, Windows XP is up with terrible disk addressing messages to not be consistent, files not where they are supposed to be, etc..  But if I start in safe mode and uninstall the Superdisk, Windows XP is happy once more and does not seem to suffer persistent problems.

  I tried to find a more appropriate (XP) or a more recent driver using my PC every day, but this product is obsolete for a long time.

  There is a ReadMe.TXT file which involves potential problems with the device and the IRQ addresses, but I'm not knowledgeable enough to make heads or tales of what he says.  In part because it is written for older versions of Windows 95 or NT.

  I suspect that it is indeed addressing conflict but have no idea how to go about fixing.  Here's what says the ReadMe.TXT file:

  *****************************************************************************************

  Overview of the Parallel Port
  -------------------------------------

  Parallel ports have traditionally been seen as "printer ports".
  As mobile and external devices are becoming very popular, new
  standards of port as Enhanced Parallel Port (EPP) in parallel and
  Extended features (ECP) port are breaking the barriers of performance
  and which allows operation at full bus speed.

  Machines IBM-compatible supports 3 parallel ports.
  Each parallel port has a unique i/o address.  The three commonly used
  O/r address are 0x3BCh, 0x378h, 0x278h with two available interrupts
  (IRQ 7 and IRQ 5). Systems not IBM as NEC 98XX have ports such as 0x140h.
  and IRQ 14. These addresses are also called by the "logical device name.
  some LPT1, LPT2, LPT3.

  Normally, the first port is configured for 0x3BCh/IRQ7, the second at 0x378h.
  IRQ7 and the third in 0x278h/IRQ5. However the ports can be assigned to one of
  These three addresses. It is possible to set up a parallel port to share
  IRQ, like most software does not IRQ use while using the port. However
  interrupt the driver software as an external hard disk, cdroms, etc., may require that
  IRQ for improved operation. Most of the systems on the market have their
  first parallel port (LPT1) assigned 378 h, IRQ 7 by default when shipped.

  The base address and the IRQ can be identified by the search:

  a. in the CMOS settings.

  b. with the help of MSD (Microsoft Diagnostics) in the BACK, the Device Manager under
  System of WIN95, WINNT Diagnostics in NT

  In some systems, the CMOS does not address basis nor the IRQ, but
  Specifies 1 parallel to 3BC/IRQ7, 2 parallel for 378/IRQ 7 and parallel 3
  for 278 /IRQ 5.

  In some LPT1/378 systems options assigned LPT IRQ 7 and assigns LPT2/278
  the turbine BP to IRQ 5.

  Troubleshooting tips
  -----------------------

  General:

  1. the questions of recognition of parallel Port
  The system has a parallel port EPP, but do not initialize in EPP.

  Solution:
  The pilot of the shuttle initialize EPP only for parallel port basics set
  to 378 h and 278 h. If the parallel port to which the device of the shuttle is
  connected is configured to 3BCh, the driver will initialize not in EPP.

  2. the driver fails to load or to identify the adapter. Pilot reports
  "Error during initialization adapter, driver failed to load".

  Solution:
  a. unplug the unit and set up the system.
  b. Add the option "/ a" to the driver.
  d. Save and reboot the system after the connection of the shuttle.
    
  If this does not work:
  Repeat steps a and b.
  c. Type "/ DI/R2 /W2"
  d. Save and reboot the system after the connection of the shuttle.

  If this does not work:
  Repeat steps a and b.
  c. Type "which / / W2/R2 OF."
  d. Save and reboot the system after the connection of the shuttle.

  Configuration of the clashes often lead to problems that system or to prevent crash
  the pilot of the shuttle from loading successfully. Make sure that other devices
  installed in the system are not configured to use the same base port and the IRQ
  values. A typical example is of sound cards that are popularly set to
  Use IRQ 7.

  BACK:

  1 Shuttle hard/removable disk drive and FDISK

  Solution:
  To partition the hard drive or removable drive with the
  The command FDISK, support INT 13 h must be activated.
     
  Add option/b to the driver in the CONFIG. SYS to enable INT 13 h support
  and re-start the system.

  Run FDISK displays now the shuttle HDD as well.

  Win 95:

  1 uninstall or prevent a shuttle loading MPD

  Procedure:
  To uninstall the shuttle MPD in Device Manager expand SCSI
  Adapters section, select the entry for the device of the shuttle,
  Click on delete. Confirm when the confirmation dialog box appears and
  Reboot the system to reflect the change.
  The entrance to the MPD shuttle now will no longer appear in Device Manager
  under SCSI cards.
  The MPD is NOT deleted it has installed the path.
  To prevent the MPD of shuttle loading, in Device Manager, expand
  the item of SCSI cards, and then at the entrance of the MPD shuttle.
  Click Properties and uncheck the box that reads Original
  [Current] configuration.
  Re-start the system, the MPD will not charge.
  (This can be checked by the Red 'X' that will appear
  alongside the MPD entry in Device Manager.)

  2 assignment/Reassigning the drive letter of the device of the shuttle

  Procedure:
  In Device Manager, select the device from the shuttle by clicking on it,
  Click the settings tab, change the drive letter appears.
  Reboot the system to reflect the change.

  3 shuttle MPDs running on machines not standard parallel port
  Addresses basic or IRQ.

  Solution:
  On machines like the NEC 9800 series, the MPD requires that be explicitly
  with the parallel port IRQ and port values.
  In Device Manager, expand the item of SCSI cards, click on the
  Shuttle MPD, click Properties, select the settings tab and type
  base port and the IRQ values as follows:
  PORT = 0xYYY IRQ = Z
  The prefix 0 x is required. YYY is the port of departure for example 140 and Z is the
  IRQ 12 value for example.

  4. the shuttle hard/removable disk drive and FDISK

  Solution:
  To partition the HARD drive of the shuttle with the command FDISK, INT 13 h
  support must be enabled.
  In Device Manager, select the device from the shuttle, click on properties,
  Check the box relating to Int 13 support and re-start the system.

  Run FDISK displays now the shuttle HDD as well.

  5. general controls and advice on improving overall performance

  a. make sure that the configuration of the CMOS setting for the parallel port
  and the setting in Device Manager is the same.
  (b) ensure that there is no Port Base and IRQ comes into conflict with others
  devices such as sound cards.
  c. If the compatible parallel port EPP, ensure that the parallel port
  in the system CMOS is set to EPP.
  d. to step to the top performance of the system, in the Control Panel,.
  Select system, select the performance tab, click file system.
  ensure that the Performance is set to Full.
  e. Select the Troubleshooting tab and make sure that writing it back
  Cache is enabled. These are usually the default settings.

  WINDOWS NT:

  1. in the start of Windows NT does not recognize cartridge not
  drive letter is assigned.

  Windows NT will not assign a drive letter unless a cartridge has a
  Signature of Windows NT.

  Solution:
  Run Disk Administrator to place a signature of windows NT on the cartridge.

  ********************************************************************************************

  Thanks for the reply, Bill.  Looked at this site a couple of days.  They seem to focus on current products.

  All is well now that I'm back to Windows 98SE on the old PC.  The Imation SuperDisk installed and works very well.  I got the files I needed.  The whole machine goes back in the closet now for 6 years!

  Thanks to everyone who took the time to look at my question.

• Series HP Photosmart Prem C310: How to download the driver for Acer desktop computer

  I got my computer and I have a printer HP Photosmart Prem C310.  It works very well with my old laptop, but do not print with my new Acer desktop computer.  It is said that missing d driver and I need to download or use a disc to install it.  My computer does not have a place to insert the discs and whenever I try to download the driver it says that it can not be found.  All of the suggestions.  I can't print with my new computer to my old printer, even if the printer still works.

  pigletpsu

  Welcome to the Community Forum of HP.

  The Support Pages for the printer are apparently all in a tangle.  I can't, either.  Mutter, bang the mouse on the desktop...

  OK - that found replacing then you can install the full feature software.  The tire site it draws from HP.

  Make sure you take the download for PC and not for the Mac.  The smile.

  The download link is located below the list of operating systems...

  Software and drivers complete HP Photosmart Premium C310a

  As soon as the HP website is 'back', be sure go you back and grab a copy of your user's Guide.

  =========================================================

  Instructions for the installation and other pieces of interest - some will be useful when the Support site is returned:

  Install the full features software - printer

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• The drive on my Acer Z5610 is overheating and stop. How can I transfer my Windows 7 on new HARD drive

  Would appreciate help from the members of the Forum.

  The drive on my Acer Z5610 is overheating and stop unexpectedly. I bought a new 1 TB WD HARD drive. I tried loading the Acer recovery CD 3 I initially created in order to load all applications touch etc, but received a message to say that I got at loading Windows. The computer came pre loaded with Windows 7 Home Premium, so I did not all Windows disks. My question is: How can I transfer Windows 7 on my new HARD drive so I can begin to rebuild the PC?

  Hello

  I think that you have created the driver & application backup, if this is the case & * if the old HDD is still detected & boots you could create a factroy restore discs, if not then you might even get to store.acer.com.

• Cannot find driver audio Acer Aspire One 725 for 32-bit on the site Acer Download Driver for Windows 8

  Hello

  I'm on Acer Aspire One 725 and recently upgrade my netbook in Windows 8 Pro 32-bit.  All the driver provided by the works of perfect Acer.  But sometimes, the quality of audio playback ' by clicking on ' sounds.

  I want to download the driver audir, but I can't find an audio driver for Windows 8 32-bit download driver Acer.

  Can someone help me?

  Thanks in advance.

  Best regards

  Indraraja

  [private under the leadership of life]

  All drivers available are displayed on our site for drivers.

  If a driver is not displayed, it means that a new driver is not available or is not necessary, as Windows provides a suitable driver for the system component.

• Failed to install the new driver Acer Aspire E1-571

  I upgraded to 8.1 8 wind wind (OEM), I tried to install the new driver for Elan Touchpad Acer support but he failed, but the installer says the driver is installed correctly, when I checked in the Device Manager, there is no momentum drver but found the PS2 of Windows compatible driver.

  Any suggestions or help appreciated, thanks.

  Thank you clyde.

  Yes, I tried different drivers and none of the newer drivers work, finally, I opted for the original driver version 11.6.8.1 and organized settings to my liking.

  The drivers installed 11.6.24.203 but not appear in Device Manager

  11.6.27.201 has frozen my BONES with BSOD

  Thanks again for your suggestion, much appreciated.

• Problems to install the driver for Canon lasershot 2900B printer, to get the message "installing the driver interrupted."

  I have problems to install the driver for Canon lasershot 2900 B printer. I have windows 7 64-bit (SP1) installed in my PC. I get the message "driver installation interrupted. I had downloaded and installed the latest driver and I get the same result. I was told it might be a problem with OS. I have had no problems to install the drivers for the scanner or hardware drivers. Thanks in advance.

  Original title: printer drivers

  Thanks for the reply of Ravi Shankar. My PC is a Dell Inspiron 530. There is no specific error message except for the one I provided. There is a solution to this problem. It seems that if the print spooler is disabled (services and storage via the computer management), the installation of printer driver is interrupted. I manually activated the spooler on automatic printing and the printer driver has been installed immediately.

• Problems with the driver of the sensor on the windows 10 x 86 with the Acer Aspire Switch 10 E company

  Hello

  I installed windows 10 x 86 business on my Acer Aspire switch 10F, because there were 10 x 86 host windows install before and I couldn't get into my computer in the domain. Now, the computer is in the domain, but I have problems with drivers. I tried to install all the drivers that are on the site acer for my Acer Aspire switch 10F. And then I did the windows updates, but I have 2 drivers that do not work is the one whose name is "Kionix sensor Fusion device" and the other whose name is 'Micro Capella CM3218x ambient light sensor. Without these drivers, I can't activate the automatic rotation for when I want to use my device in the form of tablets and I can't use the automatic brightness for display.

  can someone help me please? Thank you.

  Sellion

  The answer of the Acer support is that this computer is not done for the company and it will never be drivers for the HOME version of windows 10 x 86 version.

• Ethernet controller and yellow '? -cannot update the driver

  Has had a prob with this for awhile, but never needed so far. I tried to use my daughters mp3 and it would not recognize the device.
  I have more the xp that he keeps asking to repair the disk driver. I tried called driver free downloads but none is free and surely Toshiba should have free updates.

  My lappy is a TOSHIBA Equium A100-147 PSAABE-00800EAV

  Can anyone help as I just ordered him a video player mp3/4 fancy and I want to be able to use it to transfer music!

  Appreciate any help.

  your pete.

  If you are looking for your Equium A100 WXP LAN driver you can find HERE.

  Download the driver and unzip the files into an empty folder on desktop
  Go to Device Manager and click with the right button of the mouse on the Ethernet controller
  Choose Properties option
  Click Update driver and follow the on screen menu
  Navigate in some folder on the desktop and proceed with the installation of the driver

  I hope that the LAN driver is correctly installed.

• When Toshiba released the driver audio Vista for Qosmio G30 (PQG30)?

  It's really annoying to have no sound. No one knows when the driver must be interrupted?

  Hello

  You should check this page from driver Toshiba Vista if you want to download the drivers of Vusta for your laptop:
  http://PC-support.Toshiba-Europe.com/Vista/

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• Latest version of the driver AT/GPIB/TNT built with VAT Statement - 32.h?

  Context: AT-GPIB/TNT card linking 488.2 driver see 1.70 in Win98 TransEra HTBasic 8.3, driver GPIBNI. A device on the bus requires that interrupts is disabled. This allows this device works properly, but other devices hang. For NI Spy restores proper operation, which seems to indicate a timing problem. Technical support TransEra agrees with this assessment. Earlier versions of their software (non-Windows) error-free work. So the problem is their driver interfacing to the pilot of 1.70.

  8.3 is not the current version, they are not too motivated to fix it. However, they did look at history and found this:

  "One of our engineers did some research and I could at least limit change that probably caused the problem. Apparently, our driver GPIBNI was built using the VAT Statement - research online and 32.h include file, this file has been replaced by OR with NI488.h. He was not able to know exactly which version of the software OR it was replaced, but NEITHER are likely to help with this, or you can try just a couple of their older versions. »

  So the question is, what is the latest version of the driver OR card AT-GPIB/TNT for Windows 98 built using the VAT Statement - 32.h include file? And where can I get a copy of it? TransEra suggesting that as the solution.

  Thanks for your help.

  
  

• Pavilion g4-1100au: cannot download the driver (sp64116.exe)

  Hello, I tried to download a driver for several days, but it stops downloading almost as soon as it starts.

  It is be the sp64116.exe file, but it seems to be a general problem with the download server. When I try with Google Chrome, it stops after about 16 MB (the file is about 350 MB). When I try with Internet Explorer, I get a message saying downloading is interrupted and I went back several times - but it downloads only about 10 MB and then is interrupted again.

  Unfortunately, driver download pages all have some sort of script to download software files. There is no way to enter a URL or use FTP or torrent or something like dropbox to get the file directly.

  Please can you must solve this problem or provide alternative means to download the driver files.

  Another problem with the pages of drivers, is that if you select an OS like Windows 8 and drivers that you need happens to be Windows 7 drivers, then it will not be displayed in the list. Apparently there are several devices to an HP laptop that does not work directly with Windows 8 (or 10?) and you need to get the name of the device (and it is not one easy way to know what devices are built the laptop, if Intel or Qualcomm or Radox or another) and find the specific driver for this particular device file.

  Y at - it another site (other HP sites where the drivers can be downloaded directly or through ftp or torrent clients or something?

  Hello:

  Here is the direct link to the file from the HP FTP site.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64116.exe

  I could completely download this file using Internet Explorer 11 in a few seconds (I have 100 Mbps internet service).

• No Solution center after you download the driver for HP Photosmart D110

  My friend has a Touchsmart 300 PC running Windows 7 64 bit. I downloaded and installed the driver and the latest software, or so I thought. I downloaded the D110a driver and software. There was also a D110b but I do not know the difference. The printer worked very well for its network, but there is no Solution Center or additional software installed. I uninstalled and reinstalled several times without success. I also got "Fatal Error". When you try to open the solution Center, there is a message box with different solutions on how to fix: did not complete installation, use the CD (we tried), or go to "Configuration files" on the computer other options. Nothing has worked. Should I have downloaded the D110b driver and software?

  I appreciate your help.

  Erna

  Erna - I'm at a loss and you are probably right, go to the register to search only the HP files dealing with the printer on an HP machine would probably be very long and delicate.  I had a Sony so I have them cleared out by searching "HP" and then looking at each register who came and delete those I knew come from HP software.

  To Sherwindu - yours sounds like an installation problem that might be able to be erased by a full unistall and reinstall from the website not a CD Rom  In addition, during the installation make sure you have a strong internet connection.  I know that I have DSL (and a small DSL to this) who gets interrupted all the time and had difficulty to install the HP software because of that with many tries sometimes to do things.

  Each of you - material is generally NOT a problem of HP, which means that in general, their hardware devices are made robust enough.  My experience and my knowledge of HP and its service which is their software to run their devices is usually wrong and their organization so large with so many products that their technical departments are overwhelmed and just giving the standard corrections.  You have both found not a good internet connection without own interruption during installation, or the software is not properly written (I know that their Vista drivers weren't properly writings/facts for my HP machine, but that's another story).

  Good luck to you two.

• Installing the driver for XZ350CU

  Hello

  Can you get it someone please let me know how the monitor for the XZ350CU driver is supposed to be installed?

  I downloaded the ZIP file on the Acer site, the content of the ZIP file is three files:

  ACERXZ350CU. ICM

  ACERXZ350CU.inf

  zx350CU WHQL_sign.hckx

  10 window will not be hired one of these files as a driver, so I'm stuck with a generic PnP driver.

  I also tried to ignore the driver installation wizard and install it using the 'Disk' option, but then he finds the driver, but said that the .inf file is not digitally signed and cannot be installed.

  Acer if you please correct it!

  The plug-and-play Monitor driver should be enough, but if you want to install the .icm driver, try to disable signed driver enforcement by following the instructions at http://acer.custhelp.com/app/answers/detail/a_id/38289