iOS error ITMS-90478 and ITMS-90062 downloading with the Application Loader
Hello
When you try to download the latest versions of my apps on iTunes with the application loader, I see these errors:
I unzipped the ipa and checked that the current version number is actually 14.10.0, so I do not know why this error pops up. I tried other numbers version as well without success. I see this error with different numbers for 3 of my 4 apps. These 3 applications are 32-bit architecture right now, I'm trying to upgrade to 64-bit with this build. The 4th app was 64-bit from the start and did not show this error, but I don't know if it is related to the error.
I compile with the SDK of Air in Windows (18.0.0.180), if that makes a difference. Any ideas why this error keeps popping up?
Thank you
The behavior of the two numbers has been changed recently. Previously you could not increase the number of generation without increasing the version number, which, when using test flight of Appl'e system means that the beta has go through approval each time. If you can keep the version number the same, but increase the build number, the new beta does not have to go through approval.
Watch 'Number of Build in the iOS of the AIR' in the release notes:
http://labsdownload.Adobe.com/pub/labs/flashruntimes/shared/air18_flashplayer18_releasenot es.pdf
Tags: Adobe AIR
Similar Questions
-
Hello
One of my clients is trying to update their app. They created a new viewer of several question (via ver18).
When you download this app with the application loader that they receive the following error message:
"This package is not valid. The CFBundleShortVersionString key in the info.plist file must contain a newer version than that of the previously downloaded version.
(see screenshot)
During the audit, the app update was indeed a (iTunes) version number lower than that already on the app store. So I thought that was the problem, but when you select a higher version and try again error still persists.
I couldn't really find someone on the forum who has had this problem.
Tips are always welcome
Thank you
Bart - someone from Adobe can change the version number on the viewer Builder server. Contact your Adobe representative or Gold support.
Post edited by: Matthew Laun, deleted the reference to my direct email address. All Support Gold have access to do it now.
-
I publish a .fla in the AIR for IOS.
I'm in 2014 CC, so first I need to know what AIR I should publish in?
more recent is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
published with no error.
I see that the following files included app.xml and .swf
I converted the .ipa to a zip file
Download through the Application Loader, I get the following error
The package does not contain a file Info.plist.
Here is the infoplist for that and convert the .ipa and the info in a zip file?
I converted the .ipa in a zip file and the intoplist file is NOT THERE how to generate this?
Any help here?
the most recent is 16 +, Download Adobe AIR SDK
-
error message in the Application Loader
Hello
I have just downloaded my app zip file through the Application Loader and received 2 error messages you can see in the screenshot below. The second caveat, is something that I have with all the apps that I download via the Application Loader and is just an information note that I can't ignore so far. However, the first warning, I've never seen before and I don't know what to do with it.
I received this message from iTunes Connect, this means I can't ignore the warnings and my app will be very well the context of the Apple App Store or reject, my application?
-----------
Dear developer,
We found one or more problems with the delivery of your recent "Blickpunkt TRUCK & Bus HD as iPad". Your delivery was a success, but you can fix the following problems in your next delivery:
Invalid or not in more CFBundleVersion - the specified value in info.plist module for the key cfbundleversion must be a string consisting of a number of any of components separated by periods, where each item consists only of digits from 0 to 9. For example, one of the following elements are syntactically valid values for CFBundleVersion: "1.0", "4.2.1", '5545.12', '1.4.0.0.5 '; considering that the following is all syntactically invalid: 'GX5', '3.4.2b6', "2.6 GM", "1.0 (gold)", ""-3,6.. " In addition, each update of the same application must have a CFBundleVersion which increases compared to the previous version which was actually offered for sale on the iTunes Store. For example, if a previously available version was a "1.4" CFBundleVersion, then the following would be acceptable in the next update: "1.4.0.0.0.0.5", "1.4.1", "1.4.332", "1.5"; but all the features following (but syntactically valid) would be unacceptable: "1.4", "1.3", "1.3.99999" and "0.9". For more information on the CFBundleVersion key and the Info.plist file, see Apple Runtime Configuration information to http://developer.apple.com/library/ios/documentation/MacOSX/Conceptual/BPRuntimeConfig/ind ml
Version Mismatch - or CFBundleShortVersionString and CFBundleVersion ['31.3.0.37.98649'] [' 2.12' '] in the file Info.plist is the version of the app in iTunes Connect ['2.5 '].
After you have corrected the problems, you can use Xcode or Application Loader to download a new binary to iTunes Connect.
Kind regards
The App Store team
You can ignore a new too. See the conversation to invalid or CFBundleVersion either.
Neil
-
Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.
It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway
-
Error when you use the Application Loader
When I try to download my application in with the application loader, I get this message:
In iTunes Connect, newsstand is enabled for your version of the app. The Info.plist file must include UINewsstandApp = true and CFBundleIcons.UINewsstandIcon dictionary must be specified.
I submit multi-folio.
Please help guys!
In App Builder you must select one of the types of viewer that includes "iTunes subscription. Then elaborate on the newsstand and subscription details pages.
Neil
-
I'm reading a file mpeg and Windows Media Player C00D1199 error. How to get good download of the missing codec? I have windows 7 x 64 os.
All is not lost.
Download and install a pack of codecs, such as K-Lite (Google for it). You can find THAT WMP can then read the file.OrDownload and install a small program called Gspot (Google it)! Drag and drop in its window one of the files, you can't plzy. It will tell you which codecs are used. You can then download and install the only after doing a search on the web for it.See you soon,.Jerry -
Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!
Sorry to repeat
Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!
When it gets to this point, it is probably better to start from scratch.
First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs
Then go to the following link to download the full installer for the reader.
-
How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.
Check your descriptor file to make sure that it shows the updated version, too.
-
I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this
Go to settings > Touch ID and password > disable password.
-
What does the acronym for error 800F020B code?
I tried to update my new S3 Galaxy and some updates succeeded with the exception of
one with the error 800F020B code. It holds until the completion of the update. Help, please
as I'm not in the computer. Thank youIf the update is for your 3 contact your telephone service provider or Samsung Galaxy.
-
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017
error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).
The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.
Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)
Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.
Maybe some interviews, try to run the "chkdsk/r" command at the command prompt
Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.
How to run Checkdisk at startup CHKDSK
http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>
Run SFC/scannow
File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.
WHY: You want to ensure that the base operating system files have not been damaged or changed.
How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow
http://www.Vistax64.com/tutorials/66978-system-files.html>
04/01 / 1107:15: 20:00
-
Question: I bought Adobe Creative Suite 6 Design & Web Premium in 2013 as part of Tech Soup. I downloaded and installed. I bought a new PC and want to download/install the program on the new PC. CS6 does not appear on the list of downloads. How can I download the software? I have Tech Soup information and the serial number on the empty box, I received in the mail.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I get my serial number and click on 'Download', then the dialog box says 'unavailable screen '. What the devil?
Please access the following link to download the installer of Photoshop elements 14. If you're still having problems, try to please the link to Chrome or Firefox and check if it downloads.
Download Photoshop Elements | 10, 12, 14, 11, 13
Thank you.
-
I need your help... Buy a license and do not know if I use it since all the programs you download testing me and departs to download a specific application (Flash) asked me identification information, he placed and are not valid. There are other credentials?
Your subscription to cloud shows correctly on your account page?
If you have more than one email, you will be sure that you use the right Adobe ID?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
.
If Yes
Some general information for a subscription of cloud
Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
Maybe you are looking for
-
My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.
-
What download run to open photos sent me to the family and friends of their iphone
What download to run on my windows vista 64 bit so I can open pictures sent iphones?
-
Microsoft Media all-in-One keyboard functionality issues
* Original title: all-in-one Microsoft Media keyboard problems with Windows 7 I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB Ram with Windows 7 Ultimate edition. I use the PC as my entertainment system, so I'm under a dual tuner HD (black
-
the button of the mouse to ebb in IE 4
I tried searching the forums for this and got results much more 2 000. I crossed a little and decided to ask because I found nothing. I want to disable the mouse button as a shortcut for the back button in Internet Explorer 4. It's the most boring _
-
Hi I am a problem please help me I'm trying to install vcom driver manually on my 8 victory, but it shows cannot find the file specified how this problem.