Driver is not install

Similar Questions

• 3005 pro MT: the coprocessor driver is not installed

  Product no.: VS638ut #ABA

  [Personal information]

  Error "the coprocessor driver is not installed.

  The hardware ID you posted is present in the pilot, so the manual installation should have worked (unless the W7 driver is not compatible with W10).

  [NV. NTamd64]
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_03F4
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_07DA
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0753
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0AA3
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0D7A

  I shot the driver in the compressed file it upwards and attached it below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device of coprocessor requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Restart the PC.

• network controller driver is not installed

  My HP n6220 wifi does not work,

  my wireless assistant says that it is disabled in Device Manager, when you check the device displays Manager this network controller driver is not installed

  My equipment is:

  PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C & REV_05

  PCI\VEN_8086 & DEV_4220 & SUBSYS_12F6103C

  PCI\VEN_8086 & DEV_4220 & CC_028000

  PCI\VEN_8086 & DEV_4220 & CC_0280

  Concerning

  Hello:

  You need the wireless driver Intel support for your laptop and driver page...

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=447348 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_48946_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• network controller driver is not installed and is not listed in hp wireless

  network controller driver is not installed and wireless is not listed in hp palivion 15-d007sia. I come down from the 8.1 for windows windows 7. and start many this problem

  hardware ID:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  pls help,

  Please click here to download and install the driver

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Network driver is not installed and have no option for the wireless

  Hello

  My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.

  I've seen previous posts that you need network controller ID for this problem, they are:

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C

  PCI\VEN_168C & DEV_0036 & CC_028000

  PCI\VEN_168C & DEV_0036 & CC_0280

  Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.

  Appreciate your help.

  Best regards and thanks,

  Jeff.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

  You also have the following for Bluetooth:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe

  Kind regards.

• My HP Pavilion dv6-6c13nr Wireless Driver is not installed

  As said, the model number of my cell phone is dv6-6c13nr. Windows 7 my laptop was FUBAR to a computer virus that my sister managed to get on it somehow. I said to hell with it and just DBANed all of the hard disk and install a clean Windows 7 did. Everything was fine except the wireless driver adapter could install.

  I tried the Broadcom Wireless LAN Driver and the Ralink 802.11 b/g/n WiFi Adapter linked to the page of the driver of my PC model. On two of them, whenever I click on the downloaded file, nothing happens after having unpacked the file, no installer doesn't run. I tried to run regularly and running as long as administrator, I also tried to run the installation programs directly from where they were first decompress the C drive, on a regular basis and as an administrator.

  All other software on the driver of my PC model page and drivers installed just fine except the wireless, it's the only thing and the most important thing, that I can't seem to get on with the job. Windows 7 comes with the PC version was Windows 7 Home Premium, the version I have and that I have installed Windows 7 Ultimate. Not ultimate compatible drivers?

  I also held account install earlier versions of the drivers, but I can't find anywhere legacy versions that don't look like not fragmentary. I would really appreciate help with this.

  Hello:

  Please see my response to your other post on the link below...

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/my-HP-Pavilion-DV6-6c13nr-wireless-driver-will-not-install/m-p/4156492#M71822

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• HP laptop - 15-ac129ne: network controller driver is not installed and is not listed in hp 15-ac129ne wireless (windows 8)

  network controller driver is not installed and is not listed in hp 15-ac129ne wireless (windows 8)

  HI Reda Ben Slimane,

  You can specify your product?

  is this an Elitebook, Probook, Pavilion...

  Kind regards.

• I get an error message 'Microsoft Shared Fax Driver' is not installed.

  I was able to select 'Fax' from the list of printers and go through the Fax Wizard to send a document from my computer. Now, the document goes to the queue, but is not sent. The only message I get is that the Microsoft Shared Fax driver is not installed.

  Help.

  Original title: my PC under XP said that 'Microsoft Shared Fax Driver' is not installed. It was, and it used to work. Where can I get the driver and is it an extraordinary process to install it?

  Hi Gordon1937,

  Have you made changes on the computer?

  Method 1-

  I would have you look at the article-

  How to enable and configure the fax service in Windows XP
  
  

  How to add components and programs to a Windows XP computer

  Method 2-

  You must perform a System Restore to undo the changes made on your computer.

  See the article-

  How to restore Windows XP to a previous state

  Note: perform a System Restore will cancel all changes made previously on your computer. You may also lose unsaved information as well. Proceed at your own risk.

  Hope this helps!

• I can't clean reinstall my version of vista because my cd/dvd drive is not installed in my bios boot priority. Please can you help me solve this problem?

  (cd ide) not installed in my bios boot

  I can't reinstall clean my version of vista because my cd/dvd drive is not installed in my bios boot priority please can you help solve this problem

  You added a new drive?

  All the drivers are up to date?

  Check the cables for loose connections.

  Is it possible for you to do the following to reload the original Windows installation files?

  Start > all programs

  Select Samsung

  Samsung Recovery Solution

  Select "full restoration".

  -or-

  Restart Windows and the Samsung logo starts pressing F4 to access the recovery screen

  This is a known problem in Samsung - see document - links products are not good

  http://support-US.Samsung.com/Cyber/Popup/iframe/pop_troubleshooting_fr.jsp?idx=43092&modelname=SV0411N&modelcode=

  It is Support Center of Samsung - Re: HDD no detect does not issue

  Click Troubleshoot utility (PS there is a pop up window)

  http://www.Samsung.com/global/business/HDD/

  Samsung also recommend OnTrack Disk Diagnostic. You can make a bootable floppy to advise data with this:

  http://buyonline.Ontrack.com/ecom/fr...file=DC500.exe

  And here is the other programs from Samsung. The creator of the Manager of disc is really of Ontrack and hosted by Samsung. It should work with any brand of hard drive.

  http://www.Samsung.com/Products/Hard...file/Sutil.exe
  http://www.Samsung.com/Products/Hard...Ile/SHDIAG.exe
  http://www.Samsung.com/Products/Hard...il_creator.exe
  http://www.Samsung.com/products/hard...DM_Creator.zip

  (Disk Manager link was not on the Samsung website with the exception of one who asked for the story of your life, but in trying different possibilities with links leading to other files, I finally found one that allowed a download without having to give everything and personal information.)

  ___Taken from the following thread - Elvandil response
  http://forums.techguy.org/all-other-software/254208-Samsung-HDD-utility.html
  
   

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• installation CanonCP800 says driver is not installed

  I am trying to connect the Canon Selphy CP800 photo printer to my computer via a USB cable. He tells me that it can not install. When I troubleshoot it, it says, "the CanonCP800 driver is not installed. Install the latest driver for the device. I click on 'Apply in trouble', and he said to me, "CanonCP800 is not a pilot." I don't know what that means. Is there a way I can connect photo printer to my computer so I can print photo turned the computer off?

  You have the right drivers W7 for it? (32 bit or 64 bit depending on your OS)

  Usually best to check with the manufacturers - http://www.canon.co.uk/For_Home/Product_Finder/Printers/Direct_Photo/SELPHY_CP800/#p-specification (UK) Web site

  Of the foregoing:

  I think these are the ones (32 bit) - http://software.canon-europe.com/software/0039222.asp or (64-bit) - http://software.canon-europe.com/software/0039223.asp

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• MSM7x27 (Samsung GT-S5830) driver is not installed on windows 8

  I have recently upgraded to windows 8 (64-bit) on my computer... Maybe it's a bad blow but anyway...

  As the title suggests, the drivers of my Samsung GT-S5830 work well with windows 8... the MSM7x27 driver is not installed by windows 8... Unlike windows 7 (64-bit), it is automatically installed on it... even without the driver installation files. I even tried to install the driver files in windows 8, but no luck, instead of MSM7x27 as the name of the driver, it will show unknown device... and yet windows does not detect my phone
  PS. Windows doesn't detect my phone when it is in download mode (Android)
  Hardware ID:
  USB\VID_04E8 & PID_6601 & REV_0100
  USB\VID_04E8 & PID_6601

  wait!, I found the driver here: http://downloadcenter.samsung.com/content/SW/201306/20130610184736640/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail.exe

• «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to and the license file is damaged.
  • You are behind a firewall that blocks our license server calls.

  Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID. If you are, then next steps are please uninstall and reinstall the extensions, reset between Manager.