Iphone4s with Skype will not take the call, it's as if the ringing type is set to zero, it gives a busy year.

Similar Questions

• I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software.  It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online.  But thanks for the reply to my post. I'll be in offline mode after clicking on answer...  Thank YOU Ana Maria

• 6 days years Samsung Mega 6.3 - Skype will not complete the connection process

  I downloaded Skype on my Samsung Mega 6.3 new since I use Skype at work for messaging and want to be able to use it on my new phone like I did on my previous (iphone 4) when you work remotely.

  After entering my microsoft account information, it tries to connect, but starts a loop where it climbs from the home screen to the loading screen and back Skype, constantly.

  If I press the back button, it will make starting Skype and considered as being active on my header bar, but if I try to pull up, we start the loop.

  Phone AT & T. cannot change my APN settings, so change my proxy to 0 will not fix the problem.

  Have you tried to empty cache. No help.

  Have deleted and reinstalled several times now (I think I'm on 5).

  Ideas people? Or I'll just have to in the loop and wait for the next update to use this great software?

  Looks like the update today resolved my problem. I can now use Skype without any problems.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Former owner will not take the time to remove his ACCT. I have his name, number, address, serial number, imei of the device. I've added it to my Verizon plan. I can't activate it! Apple won't help me but him?

  Former owner is not the time to remove the device from his account. I have his name, number, address, serial number and imei of iphone.  I always had of BONE cell phones, but my daughter IOS. I made sure that the IMEI was clean and it was not on the black list before adding it to my Verizon account. Now, I learned about icloud.  Verizon has brought his number to the iphone and now she has no phone to use. I called apple, but I was told that they could not help me, but they might help the original owner.  They original owner is older and perhaps confused after I tried to explain what I've learned.  What can I do when the original owner is/was/still confused about how the system works?  I'm always lost in this world of apple.

  It sounds as if this iPhone is locked in Activation.  Here is the complete description of locking Activation:

  Find my iPhone Activation Lock - Apple Support

  Assuming that the former owner is ready (but simply not able) to help you, maybe if you contact the owner and his or her through the directions above, you'll be all set.

• That means when I try to download to finish and he say he will not take the language

  Try to download to finish making my account and it says that it will not, except my tongue. .. don't know what to do.

  Hello

  Kindly confirm what application you are trying to install?

  If TI Creative Cloud then the following link can help you to fix: change the language setting of your Cloud Creative applications

  Kind regards

  Shipti

• dynamic SQL for OPEN will not take the SQL string in the form of a string variable

  Hello
  
  I use "OPEN-for", not "EXECUTE IMMEDIATE" because I want to do multi lines request. However, 'OPEN-for' won't take a variable "strSQL' in the clause, it only took fixed ropes?
  
  create or replace function fnEnumSystemUser
  (
  LogonFilter nvarchar2,
  ...
  AdditionalWhereClause nvarchar2,
  OrderByClause nvarchar2
  )
  RETURN xxxxx.cursorType
  AS
  strSQL nvarchar2 (2000);
  
  FormatAdditionalWhereClause nvarchar2 (2000);
  FormatOrderByClause nvarchar2 (2000);
  
  SystemUserCursor xxxxx.cursorType;
  BEGIN
  
  If AdditionalWhereClause IS NULL THEN
  FormatAdditionalWhereClause: = ' ';
  ON THE OTHER
  FormatAdditionalWhereClause: = TRIM (AdditionalWhereClause);
  END IF;
  
  If OrderByClause IS NULL THEN
  FormatOrderByClause: = ' ';
  ON THE OTHER
  FormatOrderByClause: = TRIM (OrderByClause);
  END IF;
  
  strSQL: = 'select Id, FirstName, MiddleName, LastName, PrimaryEmail, PersonType, CreateDate, CreatedBy, LastUpdate, LastUpdateBy, connection, PasswdHash, IsSuspended, had left join SystemUser person on SystemUser.PersonId = Person.Id';
  -It won't work, just says "WARNING: compiled, but with compilation errors" when I tried to create the function
  Open SystemUserCursor for strSQL;
  
  -This is to call "ORA-01006: bind variable does not exist.
  Open SystemUserCursor
  ' select Id, FirstName, MiddleName, LastName, PrimaryEmail, PersonType, CreateDate, CreatedBy, LastUpdate, LastUpdateBy, connection, PasswdHash, IsSuspended, had left join SystemUser person on SystemUser.PersonId = Person.Id WHERE SystemUser.Logon like: x: y ' using LogonFilter, OrderByClause;
  
  -This failed also (on call, "ORA-00900: invalid SQL statement")
  Open SystemUserCursor
  ' select Id, FirstName, MiddleName, LastName, PrimaryEmail, PersonType, CreateDate, CreatedBy, LastUpdate, LastUpdateBy, connection, PasswdHash, IsSuspended, had left join SystemUser person on SystemUser.PersonId = Person.Id WHERE SystemUser.Logon like: x' | OrderByClause using LogonFilter;
  
  RETURN SystemUserCursor;
  END;
  
  That's how I invoked:
  declare
  Int NumItemsSelected;
  lstResult xxxxx.cursorType;
  
  TYPE SystemUserRecordType IS RECORD
  (
  ID numeric (19.0),.
  FirstName nvarchar2 (50).
  MiddleName nvarchar2 (50).
  LastName nvarchar2 (50).
  PrimaryEmail nvarchar2 (190),
  PersonType int,
  CreateDate timestamp,
  CreatedBy numeric (19.0),.
  LastUpdate timestamp,
  LastUpdateBy numeric (19.0),.
  
  Logon nvarchar2 (75).
  PasswdHash int,
  IsSuspended tank,
  Display timestamp
  );
  SystemUserRecordType oUser;
  Start
  
  lstResult: = fnEnumSystemUser (...) '%',... Person.PrimaryEmail like '% a %', "order by ASC Logon", 0, 10, NumItemsSelected);
  LOOP
  extract lstResult in oUser;
  When the output lstResult % notfound;
  dbms_output.put_line ('Id: ' | oUser.Id);
  END LOOP;
  end;
  
  I need the ability to add to the SQL string because ultimately say I need to join:
  1. ORDER BY section
  2 call a FUNCTION in WHERE Clause
  3 pagination and ROW_NUMBER() clause
  
  What can I do? Thank you!

  1. why you use NVARCHAR2 to the SQL string. Use VARCHAR2 or LONG.

  2. use

   tags to preserve formatting of your code.
  
  3. In the bind variable does not exist example it looks like you have one bind, :y, but are trying to bind two variables logonfilter and orderbyclause.
  
  4. In the third example, try logging the sql string in a table or dbms_output and running it in sql - you should get the same error and it might then be easier to diagnose.
  
  Cheers,
  Dominic                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• My firewall of Windows 7 will not take the updates more

  How do update you my Windows Firewall that stopped taking updates?  Sound not to get your updates.  How can I solve this problem?

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  The Windows Firewall doesn't in any way requires any maintenance feature.

  If you are referring to Windows Update.

  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• In Outlook Express, my E-mail address with photos will not show the photos.

  When I transfer the mail, I can see the peak and then in the preview of the shipment.  How to fix?

  MY INCOMING EMAILS DO NOT SHOW PHOTOS INCLUDED IN THE MAIL UNLESS I PASSES, VIEWABLE IN PREVIEW!  HOW TO FIX?
  Tools | Options | Security. Uncheck the box: "block images...". ».
   
   

• Update the serial number will not take

  I have a copy of 2011 of "'Adobe Design Premium CS5 5.0 MAC Upsell" (as indicated on the invoice) and bought an update out of the Adobe site for Adobe Creative Suite 6 Design & Web Premium (Mac, English). "

  
  

  The site accepts my card and took the payment, but my applications will not take the new number series as an upgrade. They return an error that it is not a product. How can I get a serial number that works?

  If your previous version's education, you can't spend... Since the educational versions are sold with a discount

  Otherwise, since this is an open forum, not Adobe support... you must contact Adobe staff to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Treo800w does not use the ringer volume, I put

  I have my "phone: known caller ' setting on the standard Treo ringtone type ringer which is preinstalled on the Treo800w." I have the 'ring type' in the Ring, but no matter how high or low, I set the ring volume, that sounds only when the volume control low when a call comes in.  He is so weak that I miss basically every call. I tried to change other ringtones and the same thing happens.  The ringtone seems to work fine when the ringing type is set to 'Increase the circle' but that started to be so weak that it increases not the ringer volume enough before the call to your voicemail.  I need my ringtone to use a volume of your relatively high ring setting. Everyone knows this?  If so, what do you have to solve?

  I got an answer to this, of Paulcalif, in another thread: "have you tried"restart"by removing the battery and put it back in.. ' Try adjusting the volume all the way first, then it reboot. »

  Lil Red: This seems to have worked even though I still think that there is a bug in the software.  If I set the ring volume to a different volume level, the phone doesn't seem to not answer. Well, as long as it sounds strong and most of the time, I'm good to go.

  Message is about: Treo 800w (Sprint)

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Take the tool does not. Take the tool selected - can see the hand but will not take anything

  Hello

  I'm new to photoshop and I am currently working through the tutorials on Lynda.com to learn as much as I can, but I'm stuck at the minute. Tutorials wants me to use the Snipping Tool to move an image and no matter what I do nothings moving. I selected the tool and see that it is selected and that the needle moves on the image but it is not striking, no selection.

  I also did with the letter to select the capture tool. Once again, this works, but will not take anything.

  Any entry in this problem would be highly appreciated. Thank you

  Hi Clara-beautiful,

  Hand tool is running when your image is enlarged and that you want to move to a specific part of the image.

  You must move your image with the mouse after a zoom once you have selected the hand tool.

  Are you a person following the same steps in workflow or other?

• With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs closes all tabs

  With multi tabs open I'm going to close Firefox 5.0 and it will not keep the tabs it closes all tabs so when I restart I have to reopen the tabs. I was using firefox 3.6 and had the opportunity to close, but keep the tabs so they would open when I restarted firefox.

  upgrade your browser Firefox 8 and check

  • getfirefox.com