IPhoto library is locked and 'force quit' or restarting solves the problem. Any ideas?

Similar Questions

• HP 8150 printer does not print error: Re-installing the printer, unplug the USB and power and re-boot do not solve the problem

  Original title: hade 8150 printer does not print

  Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you

  Hello

  (a) don't you make changes to the computer until the problem occurred?

  (b) when was the last time it was working fine?

  (c) you use a network printer or local?

  I suggest you try the steps below and check if it helps

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is helpful

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• VISA series: setting State of DTR and RTS to "Unasserted" has solved the problem of communication RS232; Why?

  In recent days, I struggled to get a pair of linear actuators Zagarella to work with LabVIEW after upgrading a computer and LabVIEW. The Zabers communicate via the serial port (RS232), who has perfectly worked on the old (but deceased) XP computer with LV 8.6. With a Win7 PC with LV 2010SP1, this suddenly no longer works. To add to the puzzle, the native of the software provided by the manufacturer has worked correctly.

  Using the Microsoft/SysInternals PortMon software, I could read in the serial communication (highly recommended debugging tool, btw). There were some differences between the native software and my LV software, so I tried a lot of things in LV to try to resolve the problem.

  Ultimately, the change of the code which makes communication with the work of Zabers is shown in the image below. The part in the structure schema disable enabled correct serial with the Zabers; It breaks the deactivation of this code.

  Now my question is: I don't have any idea why this would fix it. If I understand correctly, this property node manually off the DTR and RTS lines on the serial cable; It is common for devices like this is sensitive to these channels? I've been reading a bit on RS-232 communication, but someone here has a simple explanation of what could happen?

  I thank very you much in advance!

  
  

• Unable connect to GMAIL because "the browser not to accept cookies. I deleted the cache and cookies, but does not solve the problem.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.
  I have reset the IE setting privacy and advanced security "by default".  Always without success.
  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.
  This is as far as I know.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

   

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.

   

  I have reset the IE setting privacy and advanced security "by default".  Always without success.

  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.

  This is as far as I know.

  Use Firefox or Google Chrome.  ;-)
  (Seriously - you will have a better experience for the most part.)

  Reset Internet Explorer 8 settings:

• I think I received a text of scam, to say that my ID Apple has been locked and offering a link to fix the problem.  Has anyone received it?

  Today I got a text from a mobile phone no, informing me that my ID Apple has been locked.  I did not answer or clicking on the link sent in the message, because I suspect that it's maybe a scam.

  I was able to connect to Apple in order to send this message, which proves that the text is not authentic. I just want to warn others.

  Hello

  Clicking on the link, you have made the right choice.

  You can report the message to Apple by following the steps detailed here:

  Block the phone numbers and contacts or filter messages on iPhone, iPad, or iPod Touch - Apple Support

• We received the following error message when tring to start Word in a VB6 program. Can someone please inform us what it means and what to do to solve the problem?

  
  
  
     
  
  
     
  
  

  Hi PhillipTremper,

  Thank you for visiting the Microsoft community. The question you posted would be better suited to the Visual Basic community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.msdn.Microsoft.com/forums/en/isvvba/threads

  I hope this helps.

• Cannot start Thunderbird without hanging and force quit. [Mac] Developed after trying to remove a large amount of emails. Unknown CAUSE (problem gone)

  I made unusable Thunderbird! Whenever I start it now, it immediately crashes and I have to force him to leave.

  I have deleted thousands of emails, file by file and he was fine, but I must have overloaded it with work or something, because it crashed. Now, I can't even try solve the problems, because it does not actually work.

  I reinstalled it - same problem. I tried to open it in safe mode - same problem.

  Help!

  Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  You know that this safe mode information is based on knowledge of apple.

• The contents of the iPhoto library "copy of iPhoto library" has already been migrated to Photos.  Open the Photos to display your library or use a compatible version of iPhoto to open the iPhoto library. How can I fix?

  The contents of the iPhoto library "copy of iPhoto library" has already been migrated to Photos.  Open the Photos to display your library or use a compatible version of iPhoto to open the iPhoto library.

  What you trying to do?

  You want to open your iPhoto library in iPhoto or the new Photos.app?  and what version of Mac OS X and iPhoto you have installed on your Mac?

  If you have improved your Mac to Mac OS X 10.11,2, El Capitan, you can open your photo libraries or in News Photos for application mac or you can continue to use iPhoto, but only iPhoto 9.6.1 will work on El Capitan.

  IPhoto update (see user tip of Barney: cannot be updated iPhoto because it is not available in the App Store)

  Once an iPhoto Library was opened in Photos the extension will change to ".migratedphotolibrary".  To open this library in iPhoto again, change the extension of filename in '.photolibrary '.

  See also: Photos if does not open a library that you have already migrated - Apple Support

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  This kind of message is a scam. Do not meet it.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I see observation all that I need is my back admin rights and it should solve the problem, but how?

  There is nothing wrong with my computer pyshcically what so ever. I was and still am VERY STRESSED! for many months reading turtorials endless on many issues, but the biggest--months of admin password accepted, but refused instant access, or the file specified cannot be found, or similar error. I have no rights, privileges, etc. the whole lot. I tried to change/admin access in command prompt, but I get error 5 or access denied, or I am not at the right level. I've seen tutorials on how to move errof 5, but as usual the people do not understand that I have not just admin what so ever. They all sit down and say to use admin to resolve this issue, when the tutorial is assumed to be on the way to get the admin! to solve the problem! A few days ago, I walked into the safe directory services mode with my MIRICAL admin account! I don't know what I got RIGHT on the admin account that is functioning normally, fiddling around with it in Control Panel administrative tools to make it work. I am amazed! HOWEVER! Satan is back! Operating system Windows don't would not install error and AVG has got in the way. I couldn't uninstall AVG so I got riped off and removed as many files as I could. But suddnely I decided to change my admin password and now it does not accept the passwords, all passwords I have in my head and that you know are right that I memorized for many years. I had a password reset OF what USB made from my Windows, but it always says error when you try to change the admin password! and it is this that just blocked it, by the look of it. now I am locked out of this time, as well as access deined. I have no USB keys and had to format the reset to try one of your user bypassess, but as usual USB or DVD cannot be read on startup. I tried to download and bypasses creating a USB DVD but they will not play to restart, regardless of how I set the bios to read the disc, it may not be ready. I must run going in the security mode, when I could. Disturbances on reboot Windows freezes and so the installation screen of win 7 Home premium. I was able to run the windows installation operating system, directory services safe mode, but it collapsed when AVG got in the way. Now, I can not run it again. I can't run anything. I have upgraded to win 7 ultimate with a 26 keys that said they were rejected, but when I restarted I got win 7 ultimate. That has now expired, I don't know if the upgrade to win 7 ultimate has nothing to do with the problem. Didn't seem to when I got mirical admin access. Admin is demmanded through my computer everything including the security for what modes either editable or executable. INCLUDING ADMIN ITSELF. People JUST don't GET THAT! I can't edit or create a new admin account. You need admin to edit or create admin or standard. In all, no one seems to understand the heart of the problem. I've been clost to do when I got access miraculous admin a few days ago. but now I'm back to square one. You have any ideas how to find my password to my admin and all the rights privileges etc., so can format I hope this machine to get rid of the Trojan horse and other infections and pirate * of *!

  You must download the Windows 7 ISO on another computer, create installable media of him, and then start your own computer from it. If you do this, you will NOT have an administrator account.

  The option to boot from one drive other than drive C is often shown on the screen of boot of the computer manufacturer, but not always. As long as you can enter the BIOS and change the boot order, you should be able to boot from the newly created installation media. None of it called Windows accounts any...