iqu_installer.exe is safe to install on windows vista

Similar Questions

• HP Deskjet 1056: HP Deskjet x 64 will not install on Windows Vista

  HP Deskjet 1056 will not install on Windows Vista

  Hello

  Remove the complete software for printer. Download the latest drivers and software from link below and installation of ty.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=372330&

• Do a clean install of Windows Vista 32 8.1; advice on the new partition formats.

  Hi, I'm going to do my clean install of Windows Vista 32 8.1 today.

  Need advice on the size for my new partition (s).

  Currently defined as the partitions:

  Total: free:

  OS (c                          99.7G          11.9G

  Data (D G 111, 14.5 G)

  HP_Recovery (E 12.0 G 1.97 G)

  I am running:

  Laptop HP Pavilion DV9700 Entertainment

  32 Vista Home Premium, SP1

  Basically I want a suitable partition for the new Windows OS 8.1 (more room for restore points).

  And the rest of the data area, I guess, as if I had originally.

  Does anyone have any other ideas, because I start from scratch.

  Hi davisj-oaktree.

  To remove the Vista partition, I included the following two links http://bit.ly/1dWZLLn, and http://cnet.co/1dWZQii. Please check the information on each of these websites.

  Good luck!

• Clean install of Windows Vista Edition family

  Due to a Virus, I had to perform a cold install of Windows Vista Edition family.  After completion and activation of the software, I received a message that my product is already in use.  It was a clean install on the same computer that has more than 3 years.

  Hello Steveowe,

  It's normal. To activate it, you use telephone activation. It's free in most countries. See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• If I do a fresh install of windows vista will be I need to reformat my hard drive

  If I do a new install of WINDOWS VISTA I have to format to reformat my hard disks/drives?

  Or do all what I have to do after doing a clean install, then back to factory settings?  Could I use my other computers of WIN7 installation disc to upgrde it?

  Hello

  Your Windows 7 disc question topic:

  What is an OEM of Windows 7 license, or a license to retail that you have bought yourself?

  If preinstalled license of Windows 7 OEM or system integrator, it is related that it is installed on the original computer.

  If it is a retail license, you can transfer it to another computer.

  BUT a retail sales license can be installed on a single computer at any time.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  With the help of different methods to reinstall the hard drive for a clean reinstall Vista formats.

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And read this information on Windows 7, before you install it:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  See you soon.

• Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  original title: Windows Vista to Windows XP?

  Can a system pre-installed with Windows Vista be manually downgraded to Windows XP?

  No, you can't downgrade. But you can probably * clean install * Windows XP.

  I say "probably" because there is a potential problem with drivers XP being available for all hardware. If the computer is a laptop, this risk is greater. So check with the manufacturer or on their web site to make sure that all the drivers you need do not exist for XP.

• Re-install my Windows Vista

  How to re - install my Windows Vista if it requires an administrator password to run anything and I don't know it nor do I have a backup Wizard Reset.

  Hello

  You don't need to re - install Windows. Check these and with your local computer store or system manufacturer.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  Responses cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  What to do if you forget your Windows password (Vista and Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the Windows Vista equation editor? The program is already installed?

  How to install the Windows Vista equation editor?  The program is already installed?

  http://en.Wikipedia.org/wiki/Microsoft_Equation_Editor

  'Equation editor was developed by Design Science and is included in all versions of Microsoft Office'

  Read the above info.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell Studio XPS 435MT disk hard clean install of Windows Vista

  My hard drive died on my Dell Studio XPS 435MT. I'm doing a clean install of Windows Vista 64 bit on my new HARD drive using DVD relocation provided by Dell with the PC.

  (1) I am not able to boot from the CD/DVD player, where is the DVD of resettlement. I have set the priorities of boot and disabled the boot from the HDD. Whenever I try to boot from the CD/DVD drive, I gives me a message saying "no Diagnostic Utility Partition identified; Press a key to reboot... »

  If I unplug the new HD, then, I am able to boot from the CD/DVD player and I can not for the Windows Setup screens. However, I can't then point nine hard disk installation.

  (2) as I said, I am able to start Windows Setup screens when the HD is initially disconnected during startup. After I get to the Windows Setup screen I plug HD on the motherboard. The new HD must be recognized if I do this? Currently it is not.

  (3) following the instructions here, I said I need to 'prepare a USB SATA key in advance.

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Windows-Vista-installation/

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/downloading-preparing-and-loading-SATA-drivers/

  What drivers to I need? I tried the drivers at this link, but when I try to load them on the Windows installation screen I get a message saying that they can not be found.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=DTT5X&FILEID=2731106696&osCode=WV64&ProductCode=Studio-XPS-435&LanguageCode=en&CategoryID=SA

  Thank you.

  I found this thread on the same subject. Unfortunately your BIOS update can be run from Windows, so that won't help. But down a suggestion to unplug and reconnect the hard drive. Looks like that might work for you.

• Parallels VM - vm windows as a guest operating system - it can actually install on Windows (vista) VMS

  I bought Dw autonomous cs6 for windows and installed on a desktop computer once...? This means that I can install in your laptop? This laptop can be a Mac with Parallels VM - vm windows as a guest operating system - so can actually install on Windows (vista) vm?

  Usually with Adobe software you can install and run on up to two systems - including virtual machines - provided that they are not used at the same time.

  To move your license, it is also relatively simple to transfer the software between computers, if that's what you never want or need to do.

• Pro Tools / first software is safe to install on Windows 7

  Original title: Pro Tools / first

  I have Pro Tools / first recorded which is free. Dose anyone know if it is safe to install. Software that damage adding windows or as etch search engine.

  Thank you

  Hello

  If I understand you when you say the first tool Pro talk about the tool that is used to make the great sounding music. Correct me if I'm wrong.

  If I understand you correctly, you can read FAQ mentioned below, hope you will find all your answers.

  http://Avid.force.com/PKB/articles/en_US/FAQ/Pro-Tools-first-FAQ

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also I recommend you contact the manufacturer of the software for support and more information.

  Hope this information is useful.

• Problems installing updates windows Vista home 32-bit updates

  Hi, I have several times been impossible to install updates windows update tells me that I need for my computer.
  I have changed the settings from automatic to manual and vice versa and download updates, but are not installed.
  I am never given the opportunity to accept the license agreement.
  Some updates have not been installed.
  8007010B error code
  code 643
  I can't know what code 643 is.
  This has happened for months.
  Can what's up, anyone help?

  Thank you

  Hi zsaire,

  Let us know the updates that need to be download.

  First go through all the steps and then start troubleshooting.

  Step 1: Check if Windows update-related services are set to automatic and started.

  Click Start, type services.msc in the start search box, right-click to services.msc, and then click Run as administrator.

  Check the above services below:
  (a) Background Intelligent Transfer Service
  (b) cryptographic service
  (c) Windows Update

  Step 2: Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  2. at the command prompt, type the following commands and press ENTER after each line:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output

  3 remove all tmp*.cat to the following folder:

  % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important: Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  Step 3: Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.

  2. at the command prompt, type the following commands and press ENTER after each command:

  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll

  regsvr32 softpub.dll
  regsvr32 wintrust.dll
  regsvr32 initpki.dll
  regsvr32 dssenh.dll
  regsvr32 rsaenh.dll
  regsvr32 gpkcsp.dll
  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll
  regsvr32 mssip32.dll
  regsvr32 cryptdlg.dll
  output

  Note: Click OK if prompted.

  Restart the computer.

  Step 4: Empty the software distribution folder

  1. Click Start, type services.msc in the search box, click services.msc, and then click Run as administrator.
  2. in the Services (Local) pane, click Automatic updates and then click on stop.
  3. reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

  Note: by default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5. make sure that the Windows distribution folder is empty, and then enlarge the Services (local) window.
  6. in the Services (Local) pane, click Automatic updates, and then click Start.
  7 restart the computer, and then run Windows Update again.

  Article number: http://support.microsoft.com/default.aspx/kb/822798

  Step 5: Disable the security software

  Step 6: Scan Run SFC
  Please follow the steps below to the auditor of the filesystem as the first steps:

  1. Click Start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  Note: The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  ================================================================================

  If there are Microsoft .NET Framework listed updates to be installed, follow the steps mentioned in the article:
  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Recently, I did the update of security and had 17 updates to install for Windows Vista Home Premium SP2.

  Recently, I did the update of security and had 17 updates installed.  After installation I closed the computer for the day.  The next time that I started it upward, I received a stop error message 0x81ecbe79 and he started a reboot loop and I kept getting error code 0 x 81 different whenever it restarted.  The first 4 digits are the same with the rest changing with the exception of the 79 at the end.  So far he has done about 30 times until I finally stopped him frustration.  Also sometimes it would ask if I wanted to check on the web for a fix, but he continued the loop.  The loop stops at different places during the boot sequence.  Once he got almost completely before it restarts and a couple of times, it was in the screen of welcome and rebooted.  Is there a fix or do I have to do a clean install?  The way it is now I'm not sure that I can make a back up of my wife's Family Tree Maker files and get it all.

  1. try to restore the system and if necessary a startup repair.

  2. data recovery.

  3. where questions of Windows updates.

  1.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  2.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  3.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner