IS does not recognize the drive HARD internal

Similar Questions

• Y410P does not recognize the drive HARD and "Bad sector found" errors

  Hello, having problems with my son's laptop. He has recently updated to Win10 and after a day, the computer would not boot and did not recognize the existence of an operating system. I was able to create a bootable USB 8.1 and the operating system is now operational. However, there is no reconition of the HARD drive only SDS. The BIOS shows as available but who runs the Lenovo's Diagnostics tool (results below) translates into bad sector errors. Is there a way to recognize/recover the drive or do I need to replace? Thanks in advance. Cheers, Dave

  Flytact wrote:
  Thank you for the interpretation. Is there something specific that allows me to know that the ST1000LM024 of HARD drive is defective? I guess that I'lll need something to get a claim under warranty. Thanks again.

  The last part of your post (smart test) says that it is defective. To confirm this further you can try to physically remove the hard drive and connect it to another computer as an external drive or a secondary drive for further tests using the manufacturer's diagnostic program. BTW, Seagate is the manufacturer of the disk hard so that you can go to their site and download their program.

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP G60-235DX notebook pc does not recognize the drive d (cd - dvd drive)

  I'm reading a music cd in d drive.  My computer does not recognize the drive.  I can solve this problem?

  Press the Windows Logo key and the R key to open the run.

  Type;  regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Try again your CD.

• My Satellite phone does not recognize the external hard drive

  I recently bought a Toshiba Satellite with Windows 7 Home Premium 32 bit. I connected an external hard drive (brand is seagate) that still works on my previous laptop (Dell), but the system does not overlay the external hard drive. It does not recognize there is an 'external Hard Drive FreeAgent' but when the AutoPlay window appears & I choose "Open folder to view files" it gives me the following message is displayed:

  "G / is not accessible.
  Access is denied. "

  I called the manufacturer of the external hard drive (Seagate) & they told me that it is a windows problem.

  can someone help me? ... Thank you

  Can you please tell us which model of laptop you have exactly?
  Do you use an original preinstalled operating system?
  Are you using USB ports?
  Have you noticed the same problem using all available ports?

• Desk top HP does not recognize the external hard drive

  My HP Envy Phoenix 810 does not recognize my external hard drive Seagate 3 TB, which is installed in the drive enclosure hard Bytec HD-35SU3-BX. Have you tried two different 3 TB HD and two boxes of Bytec and nothing works.  When I installed my 1 TB in the same pregnant, it works.  Why my computer won't allow me to use my 3 TB HDDs?  I use Windows 7 and Internet Explorer 11.

  I suggest you directly contact Bytecc and inquire 3 TB HD the HD manufacturer is supported. I had an old AZIO dock who does not identify / initial with WD drives.  It was a firmware issue.

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?

• Windows 7 does not recognize the external hard drive (works great with XP)

  Hello

  Windows 7 nis do not recognize my drive external hard seagate. I get the unknown device message in relevant usb port. I have not encountered this problem initially, and the drive is recognized on a PC using XP.

  Model number: ST315005EXD101

  Help, please.

  Thanks Mark. After having tried many suggestions, I found that disconnect the PC from the sector and to leave instead of toggle solved the problem. Simple but do not remember the last time I did! :)

• historical files Windows 8 does not recognize my drive hard iomega

  I have problems with the historical establishment of files to back up my files, because the program does not recognize my Iomega portable hard drive.

  I get this error message whenever I try to backup the files.

  Historical files does not recognize this player!

  They appear in the my computer list and I can drag and drop files it, all right.

  Any ideas?

  OK, I cracked now the problem of the history files do not recognize my USB external, even if the drive expansion drive had worked initially and he was behaving normally in the file Explorer. Here is how I have it done - it worked for me on my PC - maybe it will work for others.

  1. open the file history, and then click Select Drive. Select a different drive than the one that fails to be recognized. (If necessary add a HARD extra internal drive to your PC. If you have a laptop you can try adding an extra USB drive to a different USB port - I have not tried). Continue to set up the history of the files on the new disk. Then turn off historic files on the new drive so that a whole bunch of files are not transferred.

  2. go on the external USB drive that has not been recognized, find the folder of the file history, and rename it to "File History.old" or remove it.

  3. go to your C:\Users\your user folder\AppData\Local\Microsoft\Windows, find the folder of the file history and rename "File History.old" or remove it.

  4 re - open history file, click Select drive and select the original USB key that was not recognized. The player must now be implemented normally and begin to function.

  5 remove the folder from the file history on the hot spare used in procedure 1. above.

  The process described above is relevant to situations where people can change drive letters by adding or removing disks or the system of travel between readers and for this reason the history of files configuration files are pointing to the wrong drive.

• Satellite Pro A10 does not recognize the drive WEIRD AD - 7540A model

  Hi all.

  I just bought a new model slimline DVD rewritable AD - 7540A, brand Sony NEC Optiarc. When it is plugged into the computer laptop and for the POST, it appears the 'IDE #1 error' message after the operating system starts, I am unable to open the drawer and no CD/DVD can be read.

  I checked this drive on another laptop from another brand, and it works fine, so the problem is not in the drive itself. Could someone help me?

  Thanks in advance.

  The problem is simple.
  Your phone does support not all readers of CD/DVD slimline because different or bad master/slave/c-salt settings.

  The IDE #1 error message indicates that the BIOS cannot recognize the device connected to the #1 IDE controller.

  In your case, the solution is simple; you need to buy a compatible CD/DVD player and supported

  Mayen a user manual would provide details on the management of records.
  If not, then contact the ASP in your country and ask some compatible devices!

  At soon buddy

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• After the update of DVD driver from Dell, my PC does not recognize the drive at all the

  Hi, I've updated my DVD burner on the Dell Web site (he said it was important), but since then, my computer does not recognize my dvd player at all. I click on "drivers" and the system finds it online. A halfway through the installation, I get an error code, and it says "Roxio pxhelp is missing" I don't have any Roxio software on my computer! Need help with getting my dvd drive working properly! Thanks in advance =)

  Original title; DVD writer not installed!

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.