Is it a < s:List bug?

Similar Questions

• THE GRAND & amp; DataGrid/list bug

  Hi all
  
  Looking for any help on this because of the tight deadlines. I have a mere shell of this charge in other sovereign funds. If a loaded swf file contains a list (for example) and you click on the list, when you then try to load another swf in the onLoadInit shell & onLoadError events are not triggered. It works fine when published and also during the loading of a simple html page in firefox. Open the same html page in IE6 or IE7 and it breaks.
  
  Please understand that I did a lot of flash dev - this isn't a problem with the shell - this is a final bug with the player in Internet Explorer. Please try it yourself if in doubt. I feel like I must be missing something though, as I can't find anything about it on the web.
  
  I can solve the problem by defining Selection.setFocus (null) before loading another swf. Great... except another problem with the datagrid component & list. By writing a gross onenterframe () Selection.getFocus trace you can see that only on the event mouseUp is at the center of selection set on the object. This means that if you click inside a DataGrid but release the mouse outside of the DataGrid, its selection state is undefined (I presume) as in this scenario, defining the Selection.setFocus (null) is no longer solves the problem.
  
  I guess that the datagrid selection state is not defined as Selection.getFocus () returns the selected object previously and yet the datagrid with the mousedown event has a yellow border.
  
  This is particularly a problem that I've implemented interface drag-and - drop using the datagrids and so there may be multiple times when the user clicks the datagrid but releases on an another DataGrid control.
  
  Many thanks in advance to anyone who takes the time to look at this - that it is causing me a little trouble at the head!

  I fixed it for now by disabling tabEnable on all the lists and datagrids I help - obviously not ideal, but I don't need really. I'd be interested if someone knows more about the subject.

• AE CC 2015 - list bugs

  I had to go back to the previous version of the AE; This update is to play with my productivity. Been using AE pretty much everyday for 5 years about (it is actually one of my favorite Adobe applications), it's the first time I found new version unusable.

  Bugs:

  Strange vertical lines that appear on the timeline

  Frequent crashes with useless dialogs ("' error: stuff in the wrong bag" etc. ")

  Strange banding on 16-bit pngs during playback of the RAM. They are fine when you scroll the calendar, the strange artifacts appear only during playback (of the total).

  Cannot export to Media Encoder of EI. I can COME out and bring the computer in there, but when I try to get EI I get the error "CEAP Plugin AEDynamicLinkServer: Adobe Media Ecoder is not installed." Please download and install this feature... (5027::12) ».

  Would be curious about more bugs that other users have spotted.

  AE CC 2015

  Windows 7 64 - bit processor i7-4770 3.40 GHz with 16 GB of RAM

  NVIDIA GTX660ti

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects several problems: http://adobe.ly/1Il5JYe

• Copy the list Bug Apex4.1

  Hello
  
  Come away error when you try to copy a list of an existing application.
  
  ERR-1016 request '4000' Page not found '659' (requested language = 'en')
  
  Looks as if this page is no longer needed, but branch for the next button on the 658 page has not been updated.
  Rapid work cycle.
  When on the page list of copy (658). Instead of select list in another application and then click Next.
  Manually change the url to f? p = 4000:658 to f? p = 4000:663
  
  Concerning
  John

  Hi John,.

  Thank you for bringing This problem to our attention. We will ensure that it is addressed in our next version of patch. In the meantime, you can always use the wizard by clicking on the icon 'list in another application' pg 658 rather than navigate via the Next"" button.

  Kind regards
  Hilary

• Display list bug tile

  I have a component of DataList.  When I select the item "List item repeating" inside the properties panel gives me the options to choose the tile layout and add horizontal and vertical spacing.  When I put these, the screen properly updated to reflect the changes, but, when I return to the DataList control, in the region of the main 'scene', the list restores a vertical arrangement. It displays also in a vertical list when I run the project.

  The first image is the repeated list selected item.  Note it displays correctly.

  The second image is in the region of the main stage.  Note This is not.

  The third image is in the browser.  Note This is not.

  

  

  

  Thanks for the file, Ross.

  Maybe it's not the same problem that you are experiencing, but I noticed that repeated provision of the item is saved must they (so the disabled state is on tiled floor, but the Normal State is the Vertical value).  This would explain why the vertical arrangement appears when you left edit in place (because the normal state, it's what you see).

  This seems like a potential problem of conviviality that could cause confusion, so let's look at the question.

• Export the value of the drop-down list of failure

  Hello colleagues!

  I created a simple form using LiveCycle Designer, which consist of two elements of text and drop-down list box:

  

  The drop-down list is filled with XML data:

  <MyData>
  <country/>
  <countries>
  <item uiname="United States" token="US"/>
  <item uiname="Vietnam" token="SRV"/>
  </countries>
  <state/>
  <US>
  <item>California</item>
  <item>New York</item>
  <item>Texas</item>
  </US>
  <SRV>
  <item>An Giang</item>
  <item>Bac Giang</item>
  <item>Bac Kan</item>
  </SRV>
  </MyData>
  

  Then, I handed the form, received a response and he added in the base file of responses:

  

  Later, I tried to export the responses, but it freezes. I think that the loop is executed, because I can move the progreess window, I can close the wndow to Adobe Acrobat, but when I try to cancel the export process nothing happens:

  

  So I discovered that the problem is in the drop-down list populated from XML data and list which is binding against XSD or XML elements.

  I don't know what I should do next.

  Links:

  Simple form. XML data.

  Adobe support confirmed that the problem with dropdown lists bug. Will be fixed in future version.

• Compilation of FPGA - real formal error on the cost of the port cannot be an expression

  Details:
  ERROR: HDLCompiler:192 - "C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd" line 1408: real formal on the cost of the port cannot be an expression
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd" line 69: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd ignored errors
  -->

  The compilation happens to step "using the unit felt" but then stops soon after with a compilation error.

  The line in question (1408) refers to the output of a "Reinterpretation FXP" node with the text

  Cost => (others-online '0'),

  in the part of port of the code card.  This is the output of the FXP reinterpret node is directly connected to an indicator in a VI sub whose output is then entered directly at a crossing high multiply node.  The code is part of a cosine sine LUT I programmed.  She used to compile without a problem, but I think I know where is the problem.  In one case, I have used only the sine of output of the algorithm and theory, Xilinx can optimize away from the part of cosine.  I have two instances of this VI in my code and looking at those generating any errors, the output is associated with a cosine indicator.

  Cost-online s_Cosine_2434,

  It seems that the track is essentially optimized away, but the compiler, Xilinx has a problem with the flag being present on the sub - VI but the idnicator is not used anywhere.  As a result, the cost gets set to an invalid value.  I guess close to reinterpret it FXP at the exit of the Subvi is an important aspect of this problem.

  I think I know enough now to fix this (remove the path manually by duplicating the sub - vi), but it may be useful for future bug fixes feedback in the FPGA module.  It is not the first time that this kind of removal of incorrect code me has given problems, but this is the first time I could clearly identify the problem.

  Shane

  Hey Shane,

  Looks like someone filed a bug report on it a month or two ago. It's the CAR # 475397 if you want to check for it in the list bug fixed for 2014 SP1.

• MANY blue screens - no. Dumps and for different reasons

  I am running Windows 7 Ultimate SP1 - x 64

  My startup and recovery settings are set up right:

  Write an event to the log system - verified

  Automatically - restart disabled

  Image partial memory (256 KB)

  Directory: %SystemRoot%\Minidump

  Error Reporting Service - running and set to automatic

  I got all blue screens under the Sun, Ntfs.sys does not, LeAPC_INDEX_MISMATCHErreur, IRQL_NOT_LESS_OR_EQUAL, BAD_POOL_HEADER, MEMORY_MANAGEMENT (the most common), REFERENCE_BY_POINTER, PFN_LIST_CORRUPT, and more, it's just at a glance down the list Bug Check Code reference

  Whenever this happens, no minidumps are created in C:\Windows\Minidump, even after reinstalling Windows. Almost all parts of my PC has been replaced since it started, except the hard drive, CPU, optical drive Bay hard drive and 2 sticks of ram on 4.

  I'm sure that it is not overheating, that my temperature control it ever close to overheating, even when it bluescreens. And I replaced the power supply with no luck, so I guess this isn't a power failure.

  I made the disk, the controller memory, and System File Checker check without operating

  It makes me crazy, any help would be appreciated, thanks

  If the minidumps are still not created, check these reasons as to why that may happen

  For discharges to be product what follows must be correct

  Paging file must be on the same drive as your operating system

  The basic file size must be greater than the physical RAM installed

  Windows Error Reporting (WER) system service must be set to MANUAL

  Value file system run on the operating system drive

  The value of options/crash recovery system "kernel memory dump".

  User account control must be running.

  Sometimes the SSDS with an older firmware are not DMP (firmware update)

  Applications like Ccleaner cleaner remove DMP files to avoid them until you're fixed.

  Please read this wiki to know how to find and download your Event Viewer logs

• Error ExcelToCI peoplesoft on windows 8

  Hello everyone, I'm using ExcelToCI load data into the component, but I have 1 error. I use windows 8 pro 64-bit. Hepl me please!

  

  Thanks for the support

  There is a problem with the MSXML on Windows 8 libraries. See

  E - ExcelToCI: Se Compile Error on DOMDocument reference on Windows 8 Server and 2012 using ExcelToCI(Doc ID 1524363.1)

  Support of Oracle. There is that a listed bug that is still open, but the note provide a workaround.

  Kind regards

  Bob

• File > save as PDF fails with the error: undefined: offending command 009999ffffff

  I posted about this before, and all the tests that I managed to do it relates to FM8 undeletable conditions - at least if I save the file culprit .mif and remove the conditions then he distills OK... once. Save as .mif after distilling is a not reveals that FM has postponed the conditions unsolicited. Why then he intervenes with a file where no condition is applied is beyond me.

  I think I got as much as this addition to the bugs-for FM12-someone ' can someone remind me how to bring back in the bug - log and check?

  Thanks in advance.

  The info from the link to the bugbase is on the presentation page of this Forum [ https://forums.adobe.com/community/framemaker/overview ]

  The direct link to the bugbase is: https://bugbase.adobe.com/index.cfm

  When you log the bugbase with your AdobeID, you should see all the bugs you have entered, and who you voted on [i.e. the more people who vote on a bug (or feature), faster engineering team will tackle this question; you can vote on all bugs submitted by anyone except yourself]. It's a good idea to browse the bugs and features, and some polls...

  If you can't find the bug in the list, you can use the Find tab to search for the bug. Don't forget to select FM product list, specify the type (Bug or feature or both) and what version (12, in your case), to quickly reduce the list (there are currently 9 pages of bugs/features listed for FM 11-2015 versions which FM12 has 76 listed bugs). You can also specify your name in the field "declared.

  Note: the search button to run is in the lower left corner of the tab window. Do NOT click on the button find Bug/Feature ID in the upper right of the screen.

  I did a search and I think it's the bug that you are referring to: Bug #4093614 - referenced graphics files are rejected / rinsed by distilling

  I think that you have to submit more information about what is happening and how you have to workaround. If you can, please submit a sample file will always fail for you. IF engineering allows you to reproduce the problem with your file, then the bug will get high.

• RemoteObject fault & quot; flaps & quot; call waiting?

  I see the following problem which is counter-intuitive to me. I would like someone to confirm that it is unexpected behavior until I got up to the dirty list bug with it:
  
  Create a RemoteObject to a host and make sure it is functional.
  Send several requests in a row, one of which defects.
  [at this point, I expect that the failing request sent its default event and remaining applications will continue to run]
  [short which I think if other applications will not run, they'd at least send their own fault events]
  Observed behavior in the two 2.0.1 hf 2 and Moxie is the failing application distributes its default event and other events are never heard of again.
  
  Anyone got any comments on that?
  
  Thanks in advance.

  For anyone else who can see this...

  I was using the server rubyamf and the fault has been returned by the server has been trashing the RemoteObject session. (I'll introduce a patch to correct the problem.)

  After testing the same code on a server no-rubyamf, the answer seems to be that * all applications to run, regardless of defects that occur in other requests in the queue.

• Bug in iOS 10 music "to the top following' list

  A great feature of iOS9 was the ability to remove pieces from the list 'to the top following"in the Apple's music. You could allow a random music mix, but eliminate all the "buzz-kill" of future playlist songs.  I used it all the time.  But there seems to be a bug in this feature in music iOS10...

  In iOS10 when I remove a song from the playlist "in following" the song (or songs) disappear when I slide to the left and press the Red 'delete '. But when the course of playing the song ends and its time to start the next song in the list "in following" songs previously removed reappear magically in the playlist.

  If I still remove the songs in the list "in following", even once during playback of the song ends - all the songs you removed reappear again.

  If I turn the IPhone Off + 6, then on the "next site" list will work correctly when the songs are removed for maybe 3-4 songs, but by the song 4 songs deleted reappears, and the cycle repeats. If it's intermittent.

  I was a heavy user of remove songs from the list "in following"... a little disappointed this feature does not work correctly.

  Everyone?

  See you soon,.

  Q.

  Another thread in this forum on the same topic.

  Is there a bug in shuffle the songs? iOS 10.0.1

• I installed the fix for bug TB31.1 and now my e-mail lists do not work because TB does not recognize it as a reference to a list of e-mail addresses.

  I get an error message that says:

  < "list name" > list name is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

  It is true for lists I often used in new buildings, old and new of these lists since the upgrade.

  Well, it of a regression and pointed out that the Bug #1060901. If you have a Bugzilla account, please consider voting for this question.

  Several other people have sent in the same request of support you, noting that it happened after they upgraded to version 31.1.

  The exact error message is: XXXX is not a valid e-mail address, because it is not the form user@host. You need to correct before sending the e-mail message.

  This happens in Thunderbird 31.1.0 when the description of your mailing list includes several words separated by spaces.

  Well that isn't ideal, these workaround solutions should allow you to use your mailing lists until a proper fix is implemented:

  • All by composing an email open the address book and select the list you want to send, to highlight all the names in the list and drag them to the To: box. This example uses your existing data without changing it.
  • Replace white "" between the words in the descriptions of these lists with an underscore "_". This requires modification of your descriptions of mailing list (s).
  • Upgrade to an earlier version and disable automatic updates (Windows)

  On the automatic updates

  Automatic updates are by default in Windows.

  You can Customize this behavior, however, it is under Tools > Options > advanced > update.

  My suggestion would be to put to check for updates but let me choose weather to install., especially if you depend on critical business e-mail / important or personal questions.

• Clear recent history + cookies clears all cookies, including those on the list of exceptions - bug or feature?

  I have several sites on the list of the persons authorized to keep the cookies always (options, privacy, cookies, exceptions). When I use "clear recent history" and check the cookies, the cookies are deleted, including those on the allowed list. Maybe it's a feature rather than a bug, but I much prefer it if cookies excepted were excluded.

  This is how it works. Using clear recent history clears all specified cookies and does not exclude cookies that have an exception permit. If you want to keep a few cookies then you should avoid using CRH to clear the cookies and delete unwanted cookies in the Cookie Manager or they expire when you close Firefox. In this way you keep the cookies with an exception permit.

• Irritating bug of 'Lists of contacts'

  I have 50-70 contacts and like have organized them, for example contacts, work, friends, etc. I have it by going in "Contacts-> Contact lists-> create a new list.

  It worked fine until a few weeks ago, for some reason Skype replied my lists, so now I have maybe 30-50 lists with the same name. It's very frustrating. The worst thing is, you cannot remove it at once, but do 1 by 1, which takes forever.

  I have been through the pain (30 min) to do it like that, but after restart, they come back.

  Can someone from Skype please fix this bug?

  https://community.Skype.com/T5/Windows-desktop-client/Skype-duplicating-Skype-contact-lists-version-...