Is it possible to capture video with Premiere Pro go, drive dvd/superdrive in my computer?

Similar Questions

• Cannot capture hdv with Premiere Pro

  I'm having a hard time capturing video from my camcorder high definition of Sony HDV - HC7. I am running Premiere Pro CS4 on a DellStudio running under Win 7 64 bit Ultimate system. It has a processor intel i7 CPU (8 cores) with 12 g of RAM.
  
  When I run first and select Capture it opens the capture window properly and allows me to control the camcorder. The camera is connected and working. However, it will not capture. I tried to capture several ways:
  
  1 connect the entry points and on the tape and then do a batch capture.
  2. Enter the whole band.
  3. manually press record at the correct stage is spotted on the camcorder.
  
  Each time the result is the same, nothing is captured. The meter reading displays the band plays and I can see the band playing, but the length of the recorded scene remains at 00:00:00
  
  I am connected via (camera) 4-pin to 6-pin (computer) via firewire. I tried two different firewire cables to ensure that it is not a cable problem. I don't have a capture card dedicated unless my Hauppauge Win TV HVR-1250 can be considered as a capture card. My firewire is out of the system tray, so I did not have a dedicated in system firewire card.
  
  I went through Adobe troubleshooting advice and none of these options helped.

  1. my hardware meets the minimum requirements

  2. recreate (even reinstall) cache does not help.

  3. I have tried two different bands with the same problem

  4. the connection cables work. I even tried two different firewire cables. The two show an iLINK on the camera connection and the capture window can control the playback of the camera without any problems.

  5 scene Detect is grey so I can't turn off, but I don't think it plays a role in the HDV capture.

  6. I checked my device control settings. The unit is set to sony and 1 alternate. I put it this way because I could not capture anything on the standard. I tried this setting and have captured a clip. After that, I could capture is no longer on the new setting. Even though I'm set to Standard or its replacement, the status of the camera is online.

  7 capture with another utility. I tried the software to capture from sony as well as first elements 8.0 and I have the same problems.

  8. make sure that all of the video was made. They are.

  9. Select playback (set to auto) settings.

  10. I'm logged on as an administratore

  11. I don't have a capture card. Do I need one?

  13. I run it with no other current main program execution.

  14. all my drivers are up to date.

  15. my video card driver is current.
  
  I must add that I have the same problem, try other software like Premiere Elements 8.0 and Sony Picture Motion Browser, so I think it's a hardware problem.
  
  I appreciate any suggestions. Do I need a dedicated video capture card? If so, what do you suggest me? Do I need a Firewire 4 pin, rather than a 6 port pins? Do I need a dedicated sony cable as suggested in some forums?
  
  Thanks in advance.
  
  wcameron

  my gut feeling is that the built-in firewire is not good. but before part you with little money for a PCIe version, it is possible, that you can test the device on another computer? just to rule out the camera itself.

  try to avoid really cheap FW cards. I envy those who have a TI chipset, but it's just anecdotal.

  MP

• Variable rate video with Premiere Pro

  Variable frame rate video comes from a lot of places these days: phones, live video streaming.

  Adobe Premiere is a so-called level piece of software production that took a good part of the change.

  How is it 2012 and Adobe does not yet have an answer to this problem?  After trying video editing/convert/mux/change image variable rate for 5 hours, I'm just exhausted.  No amount of conversion apps, etc. don't have saved us and THEY MUST NOT HAVE TOO.

  We have spent thousands on software over the past decade, Adobe probably 10s of thousands, and the only answer I always find is to move to Las Vegas.

  Surely, SURELY someone from Adobe with the vision of the issue can help answer the question of whether users moving in a different medium should find a place elsewhere in the software ecosystem...

  Post edited by: Kevin Monahan

  Reason: to make it more searchable article

  Changed title.

  There is no adjustment in Pr for this.

  Converted to a constant with the Handbrake

• You can capture video with pro primer

  You can capture video with pro primer

  If you want to say screenshot the answer is no. You need Adobe Captivate to do this for you.

  GeoTav published a tutorial that is actually for the creation of the ELEMENTS.

  In Premiere Pro , you can capture only a strip camera, no webcam

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• create a timelapse with premiere pro video

  create a timelapse with premiere pro video

  First pro timelapse - YouTube

  How do I create a Timelapse in Premiere Pro - YouTube this is old, but the method should still be similar.

• Capture with premiere pro cs6

  Hallo,

  I use first pro cs6.

  My problem is the DV capture,

  Because my JVC GY-HD101 camera work with miniDV en I use to capture Panasinic NV-GS500

  Capture programs that work smoothly with premiere pro?

  Thank you

  It is a known issues with capture on the latest version of CS6.

  Return to 6.0.3.

• What screen recording software (Win8) is compatible with Premiere Pro?

  What should I do to save my screen to Win8 and edit video in Premiere Pro? I spent 16 hours trying to date, only to find the screen-recorders which crash so he was trying to save my screen, and other recorders who write successfully SWF and FLV files, who refuse to Premiere Pro and Media Encoder to import. Then, how did I spend, on what product to cut my losses and get on with that? Thank you.

  Many people here use Camtasia... I did a few years back, and I think it will work. What you need is a constant-frame-rate program, instead of the variable rate using many screen capture programs.

  Neil

• No video in Premiere Pro CS4! Help!

  Hi, I had problems with Premiere Pro CS4. The imported video playback is completely black the moniter to source both the moniter of sequence. The audio plays perfectly fine, also when I change the display mode to one of the other modes they run also. It's just the composite video display is not working. I have the latest video drivers and first worked before. Y at - it something I am doing wrong is the first pro. I have only the 30 day trial and I reinstalled and updated. Please help before the 30 days has elapsed.

  Thank you

  Hello Vistafan01,

  I suggest you only to contact Adobe for problems with see video in Windows Vista on the first Pro.

  You can also watch the thses items fo rpremire Pro.
  http://PremierePro.Wikia.com/wiki/category:CS4

  If this does not help, I would say that you post in the Adobe Forums.
  Click here to post.

  It will be useful.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Stabilize the video in Premiere Pro

  Hello

  I recently shot a music video, downloaded to my PC and it shakes a lot and its not stable at all. Can I quickly stabilize the video in Premiere Pro CS4, if so how?

  I was told that you can do with Photoshop and then import into Premiere Pro that looks like a lot of work. I currently have of Premiere Pro CS4.

  Thank you

  There is a stabilization in AE:

  Source, track and control target (Pro only)

  The Tracker Panel allows you to control all types of tracking movement and stability. In this Panel, you specify your source of movement and the movement of target layer layer, choose the type of monitoring you want to use, and set options for special monitoring. Once you have set all your settings, launch you the follow-up with the buttons to analyze and apply data to follow-up with the button apply.

  Tracker Control Panel

  A. controls to create a new track, set the source query and target b. controls to set the type of monitoring c. controls to start, apply and remove tracks

  In the Panel controls of Tracker, maintain you the layer you want to follow, what you want to use data from monitoring and the layer or effect that you want to apply the follow-up.

  Source Specifies the layer that contains the query that you want to track movement. The menu lists all the layers of moving images in the current composition. If you have selected a source of the query or a checking point effect to a layer before you open the Panel controls of Tracker, After Effects displays the layer source of movement.

  Current track shows the track for the source layer that contains the tracking data. Each layer can have multiple tracks associated with it, allowing you to follow several functions in a layer or follow the same layer using different parameters.

  Proposal target Specifies the images, image sets, or the effect that you want to animate. When selected, the tracker applies the caterpillars of keyframes for the target of query layer specified to animate or to stabilize. Change the target by clicking on change target and choose a new target in the context menu of the layer in the target request dialog box. The Edit target button is not available if the Raw is selected for the Type of track.

  Open Options s the Motion Tracker Options dialog box, through which you can improve the accuracy of tracking and select third-party plug-ins tracker.

  I have not used, so recommend you ask for details in the Forum of the AE. There is a lot you can browse the process. I would just muddy waters.

  Good luck

  Hunt

• Hello Sir I want know who... still cs6 happen with premiere pro cs6

  Hello Sir I want know who... still cs6 happen with premiere pro cs6

  Hello

  Greetings from Adobe!

  Yes, it comes with premiere pro cs6

  CS6 still not installed with creative cloud

  Kind regards

  Gary singh

• In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported bot

  In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported two media accompanying the project of the lesson and media one of the practical projects that I've done before. Can someone tell me what I did wrong and why it has imported two sets of brackets instead of only in the media for the lesson. Media for two different projects are not storeed in the same place?

  I found the problem. Sorry if I've lost any time. Please do not take into account. Thank you.

• should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  should what size of file I use on jpg imported for them to properly size with Premiere Pro. When I import them into different sizes, they are large or small

  In the preferences, select scale to frame size and then any media imported after the modification will be automatically resized to fit your sequence.

  Thank you

  The f

• Trying to save a film set up with Adobe Premiere Pro on a DVD to play on DVD player...

  I am trying to record a film shot in Premiere Pro on a DVD to be played on a DVD player. I tried all the formats do not work, I use a DVD-R disc, tried to save in Media Encoder as well to change it to see if there is a difference. I am new to Premiere Pro and encoder, so I wonder if I missed a step somewhere...

  A DVD must be "created" - you do not just burn a multimedia file on the disk. Data must be encoded somehow, some folders, flags on the disc structure, etc. in the order so he could answer DVD spec to play for set-top players.

  You will need to export using the appropriate "MPEG-2 DVD" format and preset, then hold these assets Adobe CS6 Encore authors a DVD. Still is not included with the CC, but you can always download it, see the instructions here - CS6 still not installed with creative cloud

  Thank you

  Jeff Pulera

  Safe Harbor computers

• can I use a mixer with premiere pro cs6?

  I have the first pro cs6 and wonder if I could use a mixer with premiere pro cs6?

  Hi Sindrekdn,

  I have the first pro cs6 and wonder if I could use a mixer with premiere pro cs6?

  No, surfaces of control (like the mixture of boards) did not support until the Premiere Pro CC sorry!

  Thank you
  Kevin