Is it possible to customize test templates, buttons, etc. ?

Similar Questions

• Is it possible to customize the Firefox Button and if so, how?

  I love the whole upward with the Firefox button, but find I have to go into options and add the Tools menu bar (which I use often). I do not keep the menu bar showing that it takes too much space on the screen. Is it possible to add the functions of the menu bar for the Firefox button, and if not, may I suggest this as a future feature, as some of the functions of the menu bar are already on the Firefox button. As there is plenty of space may put all the options of the menu bar on the Firefox button and completely get rid of the menu bar!

  There is an add-on to customize the Firefox button. I have not installed/used the add-on. If you are adventurous, it's here:

  • https://addons.Mozilla.org/en-us/Firefox/addon/personal-menu/

  "I still have the idea of putting all the menus in the menu bar on the Firefox button for us users without keyboard shortcut." How about it Firefox? »

  We are all volunteers without compensation here to help other Firefox users. Elements of the Firefox key decisions were made by developers, and your question about it will probably not be heard by the developers to post in this forum. Maybe the add-on which above will solve the problem for you as long as the developer of the add-on retains support and update.

• Customize the gray button?

  I tried to customize the toolbar button at the time and the button from the context menu to click with the right button on the toolbar. I clicked it and customize it has not opened but I tried to open it again and it is gray... This is the 2nd time this has happened... but it is fixed after restarting firefox...

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  You can also try uninstalling and reinstalling Firefox.

• Is it possible to customize the right-click menu?

  I use FF4 RC2 and I wonder if it is possible to customize the context menu? In FF3 if you right click on a tab lists ' new tab '. Reload tab reload all tabs... "etc. but in FF4 if you right click on a tab lists only "Reload Tab | PIN as App Tab... "etc.

  I really really use the right click-> new tab in FF3 A LOT! It was a HUGE disappointment for me when I started using FF4. Is there anyway that I could add the button tab in the right click menu?

  Thanks in advance!

  Not that I know of. You can use file > new tab or Firefox > tab in addition to what I posted above.

  Maybe an extension like Tab Mix Plus can add this feature in the context menu of the Tab bar.

  • Tab Mix more: https://addons.mozilla.org/firefox/addon/1122

• How to customize the 3 buttons on the front of the Portege R400?

  I wonder if it is possible to customize the function of the three buttons on the front of my R400?

  For the moment, they seem to do nothing. I would use both of them as PgUp and PgDn display documents in tablet mode.

  Using the program "Toshiba button Support" I am only able to set the knob to "e-mail" under the screen.
  Documentation, forum, knowledge base do not mention anything about the R400 and three buttons. At least not how we define their function.

  Is to customize their possible at all?

  Hello

  What buttons do you mean exactly?

  As far as I know there are 5 different buttons;

  -Switch
  -Cross-functional button
  -ESC/display rotation button
  -Windows Security button
  -Toshiba email button

  The user manual must provide details of the simple buttons.
  But as I m don't me wrong, the configuration button is not editable. It's fix.

  You're right about the utility of Toshiba button support. This utility controls the functionality of the mail button. It is a single button that can be configured and you could assign an application to the it.

  Concerning

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Is it possible to disable the side buttons on the Laser 7000 Microsoft?

  I keep hitting when I leave the mouse and by disabling everything that I just entered. And I never use them. A supersizes also the screen when I can't.
  Thank you.

  Hello

  It is not possible to disable the side buttons on the Microsoft Laser 7000 mouse. However, if you install the Sidewinder software you can try to change the settings of the side buttons and check if it helps.

  http://www.Microsoft.com/hardware/en-us/d/wireless-laser-mouse-7000

  See also: http://support.microsoft.com/kb/258892

  If you have already installed the Sidewinder uninstall and check software testing.

  I also suggest you to contact the Microsoft Hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support

• possible to customize #{bindings. Delete.Enabled} check at the ADFBC level?

  11g ADF Faces w/ADFBC
  
  It is possible to customize the controls for a deletion lie at the underlying level EntityImpl or ViewRowImpl?
  
  On my page, I have a table within a collection of panels. On the toolbar of the collection of panels, I have a button linked to a delete operation on the iterator that provides the data in the table.
  
  I want the delete button should be disabled for certain lines, from various data controls. (In my case, check if the DB line is referenced elsewhere in the DB). Is there an EntityImpl method or ViewRowImpl I can substitute to perform this check?
  
  (I know I can replace remove() to check and throw an exception, but it would happen once the user has pressed the button on the web page.)
  
  (I also know that I can get the desired effect at work by creating a method on a bean of support to retrieve the selected row in the table and on the basis of my custom logic control on it. However, I was wondering if there was a better way to work with the ADFBC framework to achieve.)
  
  Thank you for reading my question.

  A way to do it would be to create a transient attribute in your VO, which returns true or false based on the question of whether the line can be deleted.
  Then in your page have the property to disable the button depending on the value of this transitional attribute.

• Is it possible to customize information?

  I would like to know if there is an ability to customize the PHOTOS software INFORMATION window.

  I have several artistic works albums and I'd find lines like TITLE, FORMAT, TECHNICAL and other?

  Google translation

  I wonder if there is a possibility to customize the software of PICTURES of the INFORMATION window.

  I have several artistic works albums and I'd find here custom lines as TITLE, FORMAT and another TECHNIQUE?

  Your question is not clear

  If you right-click (Ctrl-click) on the photo and info you can enter the title and the comments - in the view menu == > metadata check the metadata you want shown on the Photos

  If that doesn't help please post a clearer question

  LN

• Is satellite U400 - possible to replace the touchpad button?

  Hello

  I need help please. I want to know if there is a possible way to change the button to my Satellie U400 because they become soft and they are not as good and strong as it was before, please someone know if I can delete these and put 2 new sound?
  If you don't understand exactly what I want to say take a look at the photo and you will see/understand.

  [http://oi56.tinypic.com/j0wwoj.jpg]

  Thank you.

  Lööw salvation,

  I'm sure that it of possible to replace the touchpad buttons because you can replace everything on a laptop. But I think that it s a little trickier because you must remove a lot of pieces and that's not easy.

  You should ask an authorized service provider guys can order the new spare part for you and exchange it. Just write an email, for example, to get in touch with them.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Is it possible to customize actually components in laptops Latitude or precision more?

  Is it possible to customize actually components in laptops Latitude or precision more?

  Maybe some link hidden in a basic configuration?

  If this isn't an idea why Dell seems to have spilled their main advantage?

  Yes, but you can only do with each machine.  Especially newer models, they are pretty locked in their predefined configurations.

• Is it possible to customize the sensitive presentation - sequence of the table of contents, Index, tabs filter?

  Hello

  I use RoboHelp 2015 and reactive production layout, I need to rearrange these tabs. I want the tab of filtering of dynamic content to be displayed before the table of contents.

  Is it possible to re - sequence tab filters before tab table of contents by making some backend work in CSS or code?

  

  Or the other way improved - if we select filters say - sales, then sales related subjects should be displayed (rather extended below - just like the expansion of text).

  Is it possible to customize the sensitive provision in this way?

  --

  Thank you

  Christophe

  It is possible through the HTML code. In Notepad, open the file "Topic.slp". On line 35, you will see a list of links:

  

  You can cut and paste the link to get the correct order. The first tag appears on the left side. Please be sure to cut and paste the entire link ''.

• Is it possible to customize the login page customer web email?

  Is it possible to customize the login page customer web email? It would be wonderful to be able to offer my clients a personalized and wonderful connection Web page.

  Thans in advance!

  Diego

  Hi, no you can't.

  This is a 3rd third party vendor offering.

• I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  I created a pdf with blocks of text to fill out form. Is it possible to add a record button instead of having someone go to produce and record?

  You can add a save button slot for your file, but not a button Save.

• Is it possible to customize the icons of the bubble?

  Hello
  
  Is it possible to customize or change the selection of available bubble icons?
  
  It would be really useful to have a keyboard as well as mouse icon!
  
  Thank you
  
  Joe CCP

  Hello

  Thanks for the info.

  There is a way to do it by creating a custom style and then by replacing the image of the icon in the folder line of the publication project 'Player '. (You must be careful to keep the size of the image and the name exactly it identical to the original though).
  In the authoring tool you choose always the standard icons, but whatever it be published with your customized style appears the custom icon. The trick is to keep track of what standard icons and then map it on your expensive custom!

  Joe CCP