Looking for a peripheral hub funds focusing on the ThunderBolt

Similar Questions

• Windows 7 x 64"looking for preconfigured folders' 10-20 minutes after the base peripheral USB pluging

  As in the question.

  Windows 7 x 64 'preconfigured search folders' for 10-20 minutes after pluging base peripheral USB - flash stick, mouse, keyboard.
  The installation of the drivers is displayed.
  The small circles looking for minutes and minutes.
  Then the message becomes - installation of the unit
  It lasts still minutes (5 to 10 or more)
  At the end some time, that the device is installed sometimes it fails.
  If I unplug the unit and plug it into another USB port - all again.
  During the whole process, the computer becomes very slow and unusable.
  The Task Manager shows CPU idle but there is no update on the user interface, new programs may not start.
  When the end of the installation then it catches up and everything opens and update with a normal speed.

  I have the same problem as Windows 7 Ultimate SP1.

  If a driver online is available for a USB device, it installs ok.

  If the system is based on the preconfigured drivers folder it will not install.

  I've removed all USB devices (including root hubs), reset and rebuilt the cache driver and nothing works.

  Rebuilding my PC will take ages! There must be a faster solution!

  I found the solution!

  You need to repair or rebuild Windows DriverStore. (which would make a reinstallation)

  You need access to a working Windows machine to solve this problem, but your PC will fix the driverstore himself.

  To do this:

  1) go to "C:\Windows\System32\DriverStore\FileRepository" from a working PC that is copied to a USB drive or a network share.

  (2) on your PC goto Device Manager and find the device that settles (look for the yellow triangle).

  (3) right click and select "Update Driver Software".

  (4) select "Browse my computer for driver software".

  5) navigate to the location of your good copy of the DriverStore

  (6) "Include subfolders" check and click Next

  Windows will now search the driver good store and will be re - install the pre-configured drivers.

  Ignore any warnings about the driver being unsigned and let your PC to install them.

  Work pilots will be given on your pc, the driver cache will rebuild and your device will start working.

  Hooray!

  If you move the device to another USB port it will now install automatically, as it should.

• I'm looking for a software that will speed up the startup time and when I use etc.

  I'm looking for a software that will speed up the startup time and when I use the computer for a while, it is slow going on the Web site? do I need a registry cleaner? Please notify. I have two computers with xp and vista.

  The only thing that's really going to "speed up" your computer is a faster processor, more ram and a faster internet connection.  Everything else is really a waste of money (IMHO)

• I want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting?

  you want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting? @@

  Hi love,

  You can publish your Business Catalyst, simply open your file of muse and select files-> publish.

  Please refer to this tutorial:- publish your site with Adobe Web Hosting | Learn the Muse | Adobe TV

  In addition, once your site is published, you can add your domain to your site hosted on BusinessCatalyst.

  Please refer to this tutorial to add your domain name:- http://helpx.adobe.com/business-catalyst/using/change-site-domain.html

  Hope this helps

  Kind regards

  Rohit Nair

• Looking for images related to jump while opening the indesign file is prossible?

  Hi all

  My indesign document have 250 images. While I moved the indesign document to the other server. All images now are the missing links. While I open the indesign document looking for image links, this process is more time consuming to open the document.

  I just want the linked file you are looking for and open the file. I have them then will be re-issued.

  Looking for images related to jump while opening the indesign file is prossible?

  Thanks in advance

  Concerning

  Arul

  Hi arul,.

  Preferences-> file manipulation->
  -Check links before opening Document
  -Find missing links before opening Document

  Gruss,

  Sergiy

• for debugger, shortcut moves keyboard focus to the component source from research

  I'm in the debugger and use the search function to find a definition of the function by pressing ctrl + d. I select the function definition.
  It works great so far, but the focus of the cursor is always in the search window. In general, I now want to set the focus on the source pane (so I can scroll, set breakpoints, etc.). However, I can't find a shortcut to the source window. Y at - it a shortcut or other quick way without using the mouse?

  Thank you
  Ben

  I couldn't find a shortcut or the other, then maybe suggest to add such a feature.

  Firefox Developer Tools ideas - ideas for the development of Firefox tools:

  • https://ffdevtools.uservoice.com/forums/246087-Firefox-developer-tools-ideas

• You are looking for an extension in order to reduce the size of the image

  I often need to reduce the size of the screenshots. Looking for an extension that would allow me to do this in Photos, without the need to export, and then import them back. It's a simple task, but I could not find a way to solve this problem. There are many applications with extensions that allow cropping images, but the apps/extensions similarly dedicated screenshot cannot reduce the size.

  The feature I need, it's essentially the only preview offers under the menu set the size as a percentage or in pixels change. Special bonus for an app/extension that would work also on the pictures for iOS.

  
  

  
  

  This is not possible - you can never make any change to the contents of the library - the only way to reduce the size of the image is by exporting using different size options in the window export

  You can use a preview an external editor with external publishers for extension of pictures - I have no idea of what would be the results with that

  LN

• z820: looking for a software raid manage and view the status of disks hard raid

  HP z820 workstation,

  product # D3J63UT

  I'm looking for raid management software

  

  Thank you.

  I suggest that you follow the steps listed in the HP Document: "Z - series Workstation detection and fixing a hard drive failure within the RAID Controller utility" in the URL: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04474148#N10829 you can find instructions how to enter each State type of RAID (Intel RST, 2308 LSI and LSI 9260-8i controller - It's the main RAID controllers usually associated with the HP Z820 workstation according to the particular configuration you ordered). Note that in most of the cases described in this document, you need to access the configuration of RAID controller during computer startup steps, by pressing CTRL + I (for Intel RST) or CTRL + C (for LSI 2308) or CTRL + H (by LSI 9260-8i). The installation program uses the RAID controller firmware and does not require to install complex inside Windows software, because it is done outside of the Windows operating system before starting. Find more details in "HP Z220 SFF, CMT Z220, Z420, Z620 and Z820 workstations maintenance and Service Guide" in the URL: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04205252-1.pdf , in the devices of annex b: Setup RAID (pp. 161-171) all types of RAID controllers that are relevant at the workplace Z820 are discussed.

• Looking for ideas of navigation... clarify the terminology used in the project

  Hi people... looking for some ideas for my Captivate 5 projects navigation.

  I have a project which is executed automatically, which means it does not require the participant to click on previous/next buttons to proceed with the project. I display the standard navigation in skin buttons, however. I use also the voice-over to tell the whole project. On several slides I use specific terms or concepts that the participant may want to get more information on the... which I am more than willing to provide.

  What I would like to know many of you seasoned users of Captivate is how you would allow participants to get more information about a specific term / concept presented as underlined text in slide balls without interrupting the flow of the entire project. I thought to use click boxes that send them to another page (branching) and then provide them with a button that we continue them with the project from there. I also considered to use overview legends, too, but if they don't find the bearing before the slide advances, they miss the opportunity to ride on this point. I'm not a big fan of prompting the participant about the existence of the bearings,... I just use underlined text indicating a "hyperlink" so-to-speak.

  Anyone have some creative ways to this address?

  Hello

  Now, you will know that I prefer screenshots: you can easily duplicate a total script (see yellow highlighted button), perhaps it is better to change the default name of the script in double. ATTENTION: each object has the correct ID, in this case, it's the text caption (I've marked it ExplanationTC), so you will have to change.

  It is not possible (yet) for export/import of advanced actions

  In my last blog I tried a workaround using a model solution, maybe you saw?

  Please, this post is still profoundly marked also unanswered?

  Lilybiri

  

• Looking for an example of "function that returns the error text.

  Environment: APEX 3.1.1.00.09 on AIX 5.3
  
  I'm looking for an example implementation of the posting of the "function that returns the error text.
  
  I would like to write a database function that does the validation logic and return the text of the error.
  
  Is it possible to create multiple lines of text of error based on error conditions?
  
  I'm trying to use it at the end of the input data to go on the set of the 'document' to the entry and highlight all error conditions encountered before the 'document' is subject to additional processing.
  
  I wrote the function and reference it in a posting as ' validate_stuff (: P3_DOC_SEQ); »
  
  I have an error message "validate_stuff is not a procedure or is not defined.
  
  The object is a function, not a procedure. It is defined to return a parameter VARCHAR2 hoped posting if it is not NULL.
  
  When I run the SQL function * more and spend in a number of documents are returned the correct error messages.
  
  Any direction is greatly appreciated.
  
  -gary

  Hi Gary,.

  You must RETURN the result of the function:

  BEGIN
   RETURN validate_stuff(:P3_DOC_SEQ);
  END;
  

  Andy

• I'm on lightroom CC 2015.1.1 review. When I look for to upgrade it does not show the current revision 2015.2.1. It's as if it's not available?

  Why can't I see the latest revision of LR CC 2015.2.1? I'm on 2015.1.1 review

  Thanks, but I tried everything what with no luck. I had a great support from Adobe where the technician had to delete some files, and then reinstall the latest version 2015.3.  That being said, thank you for your reply help.

• 10 element looking for Adobe download link to re - install the new computer...

  Hello

  My computer crashed that was installed on 10 adobe elements. I could find my software key through my Adobe online account (phew!), but now I can not find

  the software for download on the old version 10. I could find some links of a website through the community, but I think it was a file 7-zip and for what ever reason that it does not extract in working condition.

  Does anyone have a working zip link?

  Thank you?

  Since the beginning of this year, Adobe has finally offered links to older versions on its Web site.

  Find is not always easy, but it's a big step forward. Until earlier this year Adobe flat refused to provide links to all. Nobody knew why, but it's a strange attitude of a society that claims to be a client brought.

  Pressures from users seems to have caused a turnaround and now the links are there.

  Download > see all downloads, other downloads, Photoshop Elements 10

• LOOK for iOS: How can I distribute only the Retina screens?

  I am almost completed an app, I designed for iOS and tested on my iPhone 4. I bought a 2nd generation iPhone so I could test on the two resolutions of screen (320 x 480 and 640 x 960) before discovering what AIR for iOS does not support very old iOS devices (I think that the rule is to iOS 4 +).

  My question is how the distribution is managed if the application will not run on these older models? People with a 2nd gen iPhone should always access an application that I publish through AIR for iOS and then be angry when it is not supported on their device? Has anyone experience this problem?

  AIR 2.5 + requires iPhone 3GS + to run. It is based on the processor Inside that

  device and newer which includes a coprocessor NEON SIMD - a requirement

  the newest air builds on all platforms (more recent than PFI/AIR 2.0, which)

  comes with Flash Pro CS5.0).

  There should be a 'resolution' taking place in the AIR for iOS parameters

  dialog box, if you updated your PFI in CS5.0 or upgraded to CS5.5. You can

  Select 'High' for iPhone retina display support. This will not

  iPad 3 retina support however.

  Kevin N.

  Edit: I it is clear that the requirements of the device are put in your application and applied by the App Store - on old devices users will never see your AIR applications in their app store, and if they link it in the App Store, they'll get an explanation of why they are unable to install the application (it will be either the requirement of the OpenGL ARE 2.0 or the processor requirements - it is similar to if you try to install a single application on an iPhone iPad). Android works actually in the same way - old/cheap ARMv6 device users don't see your application requiring ARMv7 in their app Google Play/Marketplace.

• The search function is only rarely what I'm looking for, although I can see it on the page where I'm looking.

  What is said. It used to work perfectly, but it has stopped working properly with the last update.

  I'm on an iMac with OS X 10.6.8 28 of Firefox. I had the same problem with 27.0.1 and updated it in front of her.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• ONCE YOU ARE LOOKING FOR SOMETHING HOW DO YOU RETURN TO THE HOME PAGE WITHOUT LEAVING

  I DO NOT SEE THE BACK ARROWS

  You can open a new tab to return the subject: newtab page with thumbnails of visited web pages.
  
  If you have set the homepage to this: newtab page then you can click on the home button on the side of the right end of the Navigation bar.
  
  You do not get a return enabled button to return the subject: newtab page if other pages are open from this page.