Is it possible to define different "Default category Set" purchase for different groups of companies?

Similar Questions

• Possible to define multiple default gateways?

  Hi everyone, we are moving through a new structure of intellectual property with our ESXi 3.5 server and I want to make the transition as seamless as possible.

  To this end, I would like to add a second IP address + default to the crowd, so that it is accessible via the old and the new address. My problem is that there seems to be default that a single door of entry for all the VMKernel network connections. When I change to the new network, it changes the former GW parameter too.

  Any help would be appreciated.

  Hello

  To my knowledge, this is not possible.

  Don't you have routing between 2 IP segments?

  I say you should change to the new ip address and make sure you can 'Router' to this network.

  Best regards

  Lars Liljeroth

  -

• Is it possible to define a digital password 4 digit for a mobile device, but not a pc or a laptop

  I always forget my password due to having too many different connections.

  You try to set a different password for a Web site on mobile compared to what you have on pc? If so, it is not possible. The password is stored on the Web site server and run code on the site. The browser has no control if your password is correct or not.

• Is it possible to get the "default reminder" setting of the user?

  I want to get the value of this parameter in the user's calendar options. Someone knows how to do this?

  Thank you

  Nicholas

  No, there is no method to get this parameter programmatically.

• iRecruitment Site external candidate for different groups of companies

  Hello
  
  Is it possible to create several Sites of external candidates iRecruitment each linked to a group of different record companies?
  The client instance has 3 business groups.
  
  Is it possible to implement this standard / recommended?
  
  
  
  We have created three responsibilities of custom external candidates, each was to grant the set of permissions to the external candidate of IRC and IRC profile option: join Business Group has been set at the level of RESP. The guest user has only the responsibilities of the custom external candidate.
  
  
  Kind regards
  Buxant

  If you have 3 different "external pages" for the different BGs, then simply associate the BG record a different value for each external page.

  Concerning

  Tim

• Is it possible to change the Position of KFF Structure on Business Group?

  Hello
  
  We have defined a position KFF Structure and created the Group of companies as well. Now, we have disabled the old position structure and created the new structure, but in the configuration of the Group of companies, it does not show the new structure of position in LOV.
  
  Has anyone done in the past? In this case, nothing is loaded. (Without a job / Position etc.)

  Hello

  When you set the BG, it's forever. You cannot change the BG defination.

  But if you're not set up the jobs and positions in the structure of work, then you can change the listed segments in the ff respective. But you can change the structure of the ff at BG level when it has been set.

  Thank you and best regards,
  Loubna.

• Possible to define strategies of OAM configuration on the same site on two different

  Is it possible to define strategies of OAM configuration on the same site on two different servers?
  
  One of the sites to have anonymous access but it to be protected. How to set up a policy without it automatically applies to all Web sites that match regardless of the host.
  
  How to differentiate the two OAM sites so that I can apply security different strategies for each of them?
  
  Thank you.

  You can refer to this [recent thread | http://forums.oracle.com/forums/thread.jspa?threadID=878094&tstart=0].

  Also, if one of the sites requires anonymous access for all the content and it's not going to change in the foreseeable future, just don't install/activate webgate on that.

  -Vinod

• Is it possible to create different starts to exadata?

  We have a need to have a few more starts other than + DATA and + RECO.

  How do we proceed? Exadata version is x 3.

  Thank you

  user569151-

  As 1188454 said it's possible. First of all, I would like to ask why do you need to create groups of additional disks data, the reco, and dbfs disk group is created by default. I see Exadata users often question the default disk groups and add or modify the disk groups to follow what they did previously on no RAC environments/Exadata ASM. However, usually the groups of data disks and reco are sufficient and allow the best flexibility and performance. One of the reasons to create multiple groups of disks could be wanting to have redundancy options different two different for a group of data disks - to have a prod on high redundancy database and a database of test on normal redundancy for example; but it is not much needs to change.

  Adding groups of disks, you will also need to rearrange and add new disks of grid. You must keep the prefix grid drive and disc corresponding equivalent group names. Do not forget that all the Exadata storage is allocated to the existing network disks and disk groups - and it is necessary to keep the configuration of the necessary balance and optimize performance. So add and resize the disks of the grid and disk groups are not a trivial task if you have already running on the Exadata DB environments and especially if you have enough of free space in the data and the recommendation to drop the grid of all disks in a failgroup - because it requires the removal of data before you proceed to add and resize network disks. I also met problems with the grid disks that end up forcing you to move the data on resizing disks - even if you think you have enough space for a fall aloo any group fail.

  Be sure to correctly estimate the size of the groups drive - factoring in redundancy, lack of groups and book space to handle the failure of the cell - thus the anticipated growth of the data on disk groups. Because if you run out of space in a disk group, you need to go through the process of resizing of all disks in the grid and groups of disks as a result - or buy an additional extension of Exadata or Exadata storage grids. This is one of the reasons why it is often better to stick with just the data and existing Reco.

  To add new records grid and disk groups and resize other becomes very familiar with the information and follow the steps the section "Resizing storage Griddisks" Ch. 7 user's guide the Exadata Machine as well as the information and examples in the MOS score: ' resizing disks grid Exadata: examples (Doc ID 1467056.1). I also like to refer to MOS often remark "How to add Exadata Storage servers using disks 3 TB for an existing database Machine (Doc ID 1476336.1)" what grid addition of disc or resize operations. The use case may not match, but several steps in this note are useful as discusses adding new disks to grid and treats even to create a new group of disks for occasions when you have discs of cells of different sizes.

  Be sure also to that you stick to Exadata recommended for storage as described in "Oracle Exadata Best Practices (Doc ID 757552.1). For example, the total number of griddisks by server storage for a prefix name given (for example: DATA) must match on all storage servers where the given prefix name exist. Also, for best performance you should have each grid prefix disc and corresponding disk group, spread evenly over each cell storage. You will also need to maintain the integrity of the group fail, separation of groups fail by the bin to the loss of cells without losing data.

  Hope that helps. Good luck!

  -Kasey

• Is widgets of composition - possible to have different sizes/heights for each container?

  Hi - I am currently a mobile version of our site of Muse and I wonder if it is possible to have different containers of sizes for each area of the trigger. I use the widget of the COMPOSITION of the TOOLTIP.

  Each container of the tooltip basically has an area of text in there with some information. The container of the tooltip is always the same size as the largest container in the composition of ToolTip widget.

  So, for example, I have a container of the ToolTip that has only a a text box with a few lines of text. A different ToolTip container has a text box with a few paragraphs.

  What I see is the length of the default container the size of a container with 2 paragraphs. Empty the container with the text box with a few lines of text has a vast space underneath, and I can't resize it to look any good.

  The only option is to fill the space with something like an image or another, which is less than satisfactory solution.

  
  

  See you soon,.

  Marty

  Yes you can, just go to the setting of the composition and change the position of straggling.

• Is it possible to change the default channel strip settings?

  Is it possible to change the default channel strip without having to depend on models?

  For example, I always wish to have:

  • Follow the value Name = 3 lines instead of the default line 1.
  • 'Follow the icons' checkbox deselected
  • Always follow box color
  • Control surface Bars always deselected

  Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

  Thank you!

  Is it possible to change the default channel strip without having to depend on models?

  NO.

  But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

  

  Fact

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• Is it possible to change the default font in the Mail application?

  I use the native Mail application on my Pro 9.7 "iPad. Is it possible to change the default font for new messages and replies?

  N ° police cannot be changed.

• The print is so small. How can define you default largest size print without having to click the icon on each page?

  The print is so small. How can define you default largest size print without having to click the icon on each page?

  The Firefox Page Zoom feature makes a domain level by area to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox, as with some other browsers.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• Is it possible to change the default print on a HP LaserJet 500 printer M551 color tray

  Hello

  Is it possible to install the default print to the HP LaserJet 500 color printer tray M551 be impression tray 2 times online and live?

  If so, what would be the best way to go to implement?

  Thank you

  Hi thanks for taking the time to answer.

  In the end, I gave a call to HP support, and they explained to me that the default tray will always be Tray 1 if it is open, and if you add additional bins, one at the bottom will become the default tray.

• Is it possible to define the image poster in browser FCPX?

  Is it possible to define the poster frame of the browser FCPX to the last frame of the clip?

  My use case:

  I have bunches of clips on a SD card, good and bad, taken from several scenes. Clusters.

  Each bad take is cut while now a red card to the camera. So if I had some way of looking at the last picture of the clips, I would not put the clip in the timeline or skim even the clip had been sloppy and should be rejected. I have confirmed with Canon that our XA25 will only display the first image of the scene. FCPX seems to like to display the middlemost image like the poster. If it is can not editable in FCPX someone Adviser of another method?

  Thank you!

  You can post a screenshot of the place where in FCP you are talking about? The browser may display several images and view film, you can zoom in the film of the clip. There is no single framework for the poster frame.