G0T59AV: Missing Coolsense and weird problem with graphics chip intel

Similar Questions

• Satellite NB10t-A-101 - problem with graphics card Intel using Win 10

  After I upgraded to Windows 10, The graphics card worked fine, at least 4 months later, I saw that the Intel Graphics tray icon was missing when I went into device manager he had a small exclamation mark by it and said

  Your computer's system firmware does include enough information to properly configure and use this device.
  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35)

  Then, I looked a little further into the problem and found this:

  Problem code: 00000023
  The problem: the resources for this device in conflict with the MCFG table.
  C0000908

  I have not edited the PC somehow, any solution to this problem
  Specifications of the PC (if needed)

  Model - NB10t-A-101
  Processor - Intel Celeron n 2810 @ 2 GHz
  Graphics card: Intel HD Graphics.
  RAM - 4 GB

  (Another note: I need the last generic graphics driver for Windows 10,)

  If Win10 supports the Intel HD graphics chip, a driver will be available in Windows Update.

  Check if your HD from Intel is compatible:
  http://www.Intel.com/content/www/us/...000005526.html

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Weird problem with the google search on Safari 9.0.2

  Hi all

  I had a weird problem with Google on Safari recently. After that the search for something from the Google home page and search page is loaded, I can't be able to change or enter anything in the more the google search bar. I have to reload the page every time google to search something else. Google search worked fine on Firefox though.

  I use the latest version of Safari (9.0.2) and I tried clears all history data, and Web site, but nothing has worked so far. My Mac is running on OS X Yosemite so what counts.

  Can someone understand what is the problem?

  Thank you.

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  In addition, a restart may help.

• having problems with graphics acceleration in lightroom with card amd 2015 running drivers latest

  having problems with graphics acceleration in lightroom with card amd 2015 running latest drivers. It crashes every time that you do something to make anything with acceleration for example. develop module or turn it off

  Version of Lightroom: CC 2015.1 [1025654]

  License: Creative Cloud

  Operating system: Windows 7 Ultimate Edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 6

  Processor speed: 2.8 GHz

  Built-in memory: 16383,3 MB

  Real memory for Lightroom: 16383,3 MB

  Real memory used by Lightroom: 841,5 MB (5.1%)

  Virtual memory used by Lightroom: 853,0 MB

  Memory cache size: 261,4 MB

  Maximum thread count used by Camera Raw: 6

  Camera Raw SIMD optimization: SSE2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1600 x 900, 2) 1600 x 900

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 6800 Series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13397 context 15.200.1046.0 the base profile

  Renderer: AMD Radeon HD 6800 Series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: K:\hdd\photos\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\nathan\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) Behance

  (2) substantive canon Plugin

  (3) Facebook

  (4) Flickr

  (5) irista

  Config.LUA flags: None

  Map #1: Seller: 1002

  Feature: 6738

  Subsystem: e178174b

  Revision: 0

  Video memory: 1011

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Corsair Gaming H1500 helmet)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  You can disable the GPU manually by changing the preferences file to LR with a text editor such as notepad and change the line useAutoBahn = true to useAutoBahn = false.  You do not want to do with LR does not.

  On Windows, the LR file is located here:

  C:\Users\- yourusername -\AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs

  You could make a backup copy of a file agprefs on your desktop, firstly, in the case where mess you something.

• Weird problem with enums

  Hi all

  I have a weird problem with the implementation of controls and access their values. It seems that EI is pulling the wrong values for me.

  
  As follows:

  I have

  enum { }

  SKELETON_INPUT = 0,

  SKELETON_GAIN,

  SKELETON_COLOR,

  SKELETON_DELAY,

  SKELETON_POSITION_X,

  SKELETON_POSITION_Y,

  SKELETON_NUM_PARAMS

  };

  and

  enum { }

  GAIN_DISK_ID = 1,

  COLOR_DISK_ID,

  DELAY_DISK_ID,

  POSITION_X_DISK_ID,

  POSITION_Y_DISK_ID,

  };

  And I create my fine controls like sliders and they appear

  However, in my method of rendering, the values that AE comes out is wrong.

  Suites. ANSICallbacksSuite1 ()->sprintf(out_data->return_msg, "X = %1.2f Y =%1.2f ',)

  params [SKELETON_POSITION_X]->u. fs_d. value,

  params [SKELETON_POSITION_Y]->u. fs_d. value );

  
  

  Instead of getting the values of Position X and Y in the effect control, I'm SKELETON_GAIN for X and NAN values for Y.

  
  

  Is that all that I forgot to put? AE not to complaint of the any mismatch of parameter.
  

  DOH

  This is one of those who come to you once you have posted.

  So the order of creation is too important.

  Initially, I wanted to put my POSITION_X controls and Y in the first place and thought he would keep the enum attributed honest.

  But apparently I need my order of creation is the same as the enum values.

• having a weird problem with my assignment after incorporation of java

  Hello
  
  I have a weird problem with my assign activity, I use a Java Embedding wherin I access a variable and assign it some data, further in the next step when I try to assign data to the same variable affecting the activity I get an error message as below.
  
  
  com.oracle.bpel.client.BPELFault: faultName: parts of {{http://schemas.xmlsoap.org/ws/2003/03/business-process/} selectionFailure}: {{summary = not valid for the type of part.}} When you perform the operation of the entitlement, the node THIS, IS, TEST is invalid. The node named in the error message was either null, or a node-set is empty, and it was not an instance of org.w3c.Element. Check the value of the node to the line number 795 is not null and is an instance of org.w3c.Element. } .
  
  I am using soa 11.1.1.5
  
  Can someone please help?
  
  -Thank you
  Shirish

  Shirish,

  This is a bug and you will need to apply a patch for it.
  You can find explanations in Oracle Support Id ID 1194228.1.

  Arik

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• E520 - problem with 64-bit Intel HD Graphics Driver

  Hi guys again.

  I would like to apply for assistance. I have problems with the driver Intel HD graphics 64-bit downloaded from http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8hd613ww.exe (for my Edge e520 1143-37 G). I have Windows 7 64 bit Czech.

  When I try to install this driver, he continues to say "this computer does not meet the minimum requirements for installing the driver". I already have these:

  1.) when I set "Integrated graphics" display in the BIOS settings, then I can install this driver, but I can't install ATI driver.

  2.) when I put "Switchable graphics" display of the BIOS, then I can install ATi driver, but I can't install the Intel HD driver by telling this thing on the minimum requirements.

  I have the latest drivers for chipset, SATA AHCI, etc. Any help would be appretiated. Thx a lot.

  Daniel

  Ahoj.
  Kdyz v notebooku grafiku prepinatelnou mas, ti tak staci AMD muxless drivers.

  Obsahuji AMD Intel ovladace tak jak Ty...

  Samotne Intel ovladace nelze zvlast instalovat/aktualizovat.

  Benik3

• Just bought Wndows Vista and having problems with the port for Palm 125

  I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer.  I get an error message saying: "No available Com1" what should I do?

  Thank you

  Frustrated

  Don't ask me the procedures step by step that I did, but I finally success!  I uninstalled Palm Desktop and started from scratch.  I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site.  It still does not, I manually added a port and manually changed to COM1.  I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder.  It is always active, I updated my computer for Palm USB driver.  Miraculously it worked.  Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.

  Message relates to: Palm m125

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

  Hello!

  I have several lenovos windows 7 with this update

  Problems updating graphic adapter Intel Corporation - Graphics Adapter WDDM1.1 WDDM1.2,

  I'm trying to fix it with the original driver?

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

  all the solutions out there?

  THX

  Peter

  You can download the driver from the Intel website (search on your model number of graph, then Windows 7), read the notes first check it is correct for your hardware, uninstall the graphics drivers (Windows will return to a default basic driver), restart and install the new drivers.

  If this does not work, the Lenovo Web site will be older (but certified to work) drivers for your system model.

• Problems with the NIC Intel N 7260

  I have a 15 HP Pavilion age of 4 week t-n200 laptop is Windows 8.1.64. I'm having a problem with the NIC Intel N 7260. All of a sudden the laptop will show it does not connect to all networks. It will show a yellow triangle on it and will not connect to any network adapters. I tried to "roll back driver" and who worked initially, but now he has started with the yellow triangle and lost functionality. Now "roll back driver" is grayed out and is not an option. However, there is no update available. It currently shows pilot 16.10.0.5. It displays the code 43 under Details of the device. Other computers home connect well to the internet currently.  Please advise, thank you!

  Hi junebug07110,

  Welcome to the HP Forums!

  I'm sorry to hear that you have a problem with your Intel N 7260 network card.  I'll try my best to help you solve this problem!

  I suggest you reinstall the driver for Driver Intel 7260/3160 Wireless LAN.  Follow the procedure in this document using Recovery Manager to restore the software and drivers (Windows 8) restore the driver.  The steps are the same for Windows 8.1.

  I hope this information is useful. Please let me know how it goes, I'll wait for your answer.

  Thank you and have a great day!

• Pavilion 500-321: Option to increase dedicated RAM graphic chip (Intel 4600)

  Is there a way to increase the RAM dedicated to the graphics chip (Intel 4600)? I would benefit from it? I tried to look in the BIOS, but it is not an option for that.
  
  My PC has 12 GB of RAM - 10 (64-bit) Windows
  
  Thank you.

  @Adrianrff, welcome to the forum.

  No, there is no way to increase the amount of video memory.  The only way to do it is by adding a discrete video card.  In addition, it would require a power supply unit (PSU) upgrade.  The existing PSU is only 300W.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Weird problem with forms and the definition of multiply

  Hi all

  I'm having a problem with the forms drawn with the pen tool and this weird border (no stroke). It appears when the transparency settings are changed (multiply, overlay, etc...). I've updated AI CC and restarted the program with no fix. The only known cure is to add a line to the object. Any help is appreciated! Thank you

  

  Have you tried to switch between GPU and CPU preview?

  Ctrl Cmd E E (Mac) (Win)?