Is it possible to detect the State of hide/show the region...

Similar Questions

• How to set the initial state to hide/show buttons on opening PDF files?

  InDesign offering a wonderful object multi-state capacity which unfortunately does not work in PDF files. It took a bit of research for me to come with this information, the UI program itself gives indications that this should work. (Why not maybe another forum of discussion.)

  So, I create an interactive PDF using buttons to hide/show specific paragraphs (which are also implemented as buttons because only the buttons and forms can be hidden or shown, AFAIK).

  I've set up a PDF created via InDesign using the six control keys and seven paragraphs - one of these paragraphs is the initial state that I want to see when the document is opened. As long as the PDF file that I create is distributed, that's how it works: an initial paragraph appears, buttons can be clicked and the stuff of Heroes appears the mark.

  However, a colleague thoughtfully saved the PDF file (so it could rename something more to his liking). When he does this, he left one of the displayed subsidiary paragraphs, rather than the initial paragraph I intended... and of course, this is the version that came out to the customer.

  Question: Is there a way to set the initial state to hide/show buttons when a PDF document is opened first, regardless of the State in which he could let or saved? I guess it's sort of ON OPEN event that would allow me to define an initial state as a safety net to the way I save the original document. Obviously, the PDF AS I DELIVER IT will pave the way, I want it, but I'm trying to overcome the appearance of the Murphy's law of a document that can be re-recorded in another State. An event which OPENED on that cure.

  Thank you.

  in this case you would have been better if you had locked the PDF file in order to prevent changes ANDS record as actions...

• Possible to detect the button home in IOS and then goto a frame (to pause the game)?

  My game requires the player press a button in a few seconds, and if the home button it paused the game, but when the player goes back to the game, there is not enough 'normal' time press the button, so I tried; When you press the home button - to have a function that takes the game again chassis with a custom Resume button.

  Is this possible?

  Dan

  Hello gronli21, take a look at these two sons, I hope this can help.

  http://forums.Adobe.com/message/4102282

  http://forums.Adobe.com/message/4073390

• Is it possible to share the regions between pages?

  I am currently using 3.0.0.00.20 (I know that's not very new). I was wondering if it is possible to share regions (with the included items, buttons, etc.) or any more recent version of the APEX? I have a few very similar pages that are similar in different ways according to the pages you are comparing. So a region might be on page 1, 3 and 5; while another could be 1, 2, and 3; and yet another on 3, 4, 5. I prefer not to write and then copy one page to another or write a monolithic page that shows the areas under certain conditions. Any ideas, tips?

  Look at page zero - I think that it is in this version. Allows you to define regions... etc. that appear on each page. You can then put a condition on what it should only appear on certain pages. Just search the forum or the documentation that it - it should be in every sense.

• Possibility to change the region on laptop DVD code was limited__

  I have and watch DVDs from several regions 1,2,3.  My toshiba satellite running Vista Home Premium to limit the number of times I can do this.  Toshiba says that it is a limitation of windows.  Microsoft does not answer more questions of Vista.  We know of a fix for this or a computer laptop or net book which allows the use continues its DVD on several regions.  = Really what is a PC who loses the functionality with time and usage?

  Hello

  You can modify the code region only to a limited number of times (i.e. 5 times). This is by design, but you can post your comments on Microsoft Connect in order to help us improve Windows. Click on the link below.

  https://connect.Microsoft.com/dashboard/Info/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Detect the status of calendar wireless sync...

  Hi all

  Is it possible to detect the State of wireless calendar synchronization, as active or disabled?

  Thank you

  No, there is no API that allows you to directly query this information.

• Y at - it no event id to detect the windows update window popup?

  is it possible to detect the update to popups otherwise than by the names of all open windows of the poll? Will there be an event in the event recorders when the pop-up appears with options to restart or postpone?

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  I understand that you want to know if there is a specific event ID to detect Windows Update restart or delay popup. There is no way the observer of events or script to detect the pop up Windows Update in Windows 7. Please refer to the information provided in the following TechNet query and check if it helps.

  Update to detect and defuse pop - up dialog box

  However, you can configure how Windows updates are installed under Windows 7. You can choose between an automatic update, select the updates to be downloaded or installed manually. Please for Windows 7 in the following support article, refer to the sections and check if that helps.

  How to configure and use automatic updates in Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to detect the movement of components in PaneView event?

  Hi, there! ~

  At first please let me explain what is my development environment, I am develping apps based on BlackBerry JRE 6.0.0 by Eclipse and I'm debugging my apps on Simulator (BlackBerry 9800, 6.0.0.706) and peripheral (BlackBerry 9900, 7.1.0.912)

  I'm starting a new application which is a multifunction, during the wake I want to use a new layout UI for me, I've already imported from the code named "PaneManagerDemo" example and I built a framework in my application, I initialized TitleView as HorizontalScrollableTitleView and add titles and content.

  I also used a UI component custom named "ListStyleButtonField" come from the official web site of blackberry, once all the ListStyleButtonField of accumulated height exceeds the height of the content field, which cause the ListStyleButtonField lost her concentration and I do not know the focus was left to the last content topic whose screen slipped to finally make the time.

  My question is is it possible to detect the components slide event, I'll focus on the ListStyleButtonField what is the top of the content if I can control this event, please help me to solve this problem, thank you! ~

  I already find the method to detect the movement of the pane in PaneViewManager event, by according to this thread How to handle events of TouchGesture

• How to detect the screen off the power of the event

  Is it possible to detect the screen off the power of the event?  I am looking to detect when the screen turns off due to time-out or press the button of the lock screen.  Similarly, I would need to detect where the screen turns back on.  I searched through the API WebWorks and forums but have not found anything relevant.  Maybe I'm looking just the wrong thing. Any help would be appreciated.

  Hi deedubbu,

  I'm certainly not an Expert in Java BB so it might be a good idea to post something on these forums, but a quick search on Google, it seems that you should be able to encapsulate event

  In Exchange for my Google search, I humbly request post you the result on our community API github repo

• Detect the ActiveFrame in Webworks?

  I have an active frame running in my application webworks. I want to detect when the user passes in active frame mode and having the image changes every 5 seconds.

  Is it possible to detect the active frame in webworks?

  entercover event

  http://developer.BlackBerry.com/HTML5/APIs/BlackBerry.UI.cover.HTML#event:entercover

• [SOLVED] How to detect the vmwaretools COS version

  is it possible to detect the vmware tools COS esx host version?

  I tried with vmware-cmd and look a the guest virtual machine configuration file, but it does not work

  I'm not interactue with guest O.S.

  Is posible to cos?

  Yes, although vmware-cmd will not have this information for you.

  You can use vimsh's classic vmware-vim-cmd ESX and ESXi is vim-cmd

  First of all, you need to retrieve the list of virtual machines, you have, you can do this by running the following command and by extracting the property 'VmID ':

  VMware-vim-cmd vmsvc/getallvms

  This output, you will have the VmId as the first column and you will use this ID to get information on your virtual machine, to check the status and version VMware Tools will run, you must run the following command:

  VMware-vim-cmd vmsvc/get.guest [VMID]

  Here's a running example looking for a virtual machine called "vma40" and checking the version of VMware Tools:

  [root@himalaya ~] # vim - vmware - cmd vmsvc/getallvms | grep vma40
  1872 vma40 vma40/vma40.vmx [dlgCore-iSCSI-zebi96-VDI] vmx - 04 OVF rhel5_64Guest this file contains the vSphere Management Assistant (vMA) virtual machine.

  [root@himalaya ~] # vim - vmware - cmd vmsvc/get.guest 1872. grep-i tools
  toolsStatus = "toolsOld"
  toolsVersionStatus = "guestToolsNeedUpgrade"
  toolsRunningStatus = "guestToolsRunning"
  toolsVersion = "8193."

• How to detect the user loged

  Hi all
  
  I have a scenario like this,
  
  I have a global report in which some one-stop codes are available.
  Once the user is logged into the system, I want to limit the report details according to its code window.
  
  ex: report of the details (name, age, address, salary, branch)
  
  one login user-> branch code is (COL)
  
  do not be able to view the report details that are related to other sectors.
  
  is it possible to do using Apex...? or I have to manage this through the query...?
  
  If I need to manage it from a query, then I must detect the session of connection clearly as the user login name.
  Then I can use the name and the code of the branch of the connection table and proceed to the request... I guess im correct ;)
  
  is it possible to detect the login name of the user and get him to a sql query?
  
  ex: say MAX direction COL login name of the
  
  Select * from TABLE_SAMPLE where branch_code = (select branch_code from USERS where uname = 'MAX' ;);
  
  -----------------------------------------------------------------------------------------------------
  
  can someone give me a hand on this regard.plss... ???
  
  Thank you
  Max
  
  Published by: Max on December 6, 2010 04:46

  do not be able to view the report details that are related to other sectors.

  This is known as Fine grain Access Control (FGAC).

  is it possible to do using Apex...? or I have to manage this through the query...?

  Both. The best approach is to use the private virtual database (DPV), using integrated Security VPD attribute Apex to put in context.

  VPD requires a database Enterprise Edition. A similar approach can be developed using the parameterized views, new setting the context through the security of APEX VPD attribute in other editions.

  >
  If I need to manage it from a query, then I must detect the session of connection clearly as the user login name.
  Then I can use the name and the code of the branch of the connection table and proceed to the request... I guess IM OK

  is it possible to detect the login name of the user and get him to a sql query?

  ex: say MAX direction COL login name of the

  Select * from TABLE_SAMPLE where branch_code = (select branch_code from USERS where uname = 'MAX' ;);
  >
  Use the substitution string integrated APP_USER to get the ID of the authenticated user:

  select * from TABLE_SAMPLE where branch_code=(select branch_code from USER where uname= :app_user);
  

• IT IS POSSIBLE TO CHANGE THE CODING FOR THE DVD PLAYER REGION

  is it possible to change the region coding on the dvd player

  Yes, but only 5 times.   It cannot be used to change the region to play a dvd, then changed back.  After 5 it changes in locks

  To change it, I think you do a right-click on the dvd drive and go to the tab (im not an atm computer) in the region.

• Hide region show how to maintain the status of hide/show on send page

  APEX 4.2.1 using theme 24

  I have several areas on a single page that are defined using the "Hide Show Region" model this model defines the regions to show everything first. If a user chooses to hide a region is there a way to keep this state when the page is submitted? Example region top of page is to hide/show parent to an interactive report, below this area is a relative of region to hide/show for a tabular presentation, if the user chooses to hide the interactive report region and they enter data in the region in a table, when he clicks on save and the page is submitted the interactive report region appears and the tabular form region appears still longer down in the page and the user have to scroll down to access.  I'd rather have the page 'to remember' the State of hide/show that the user has selected for each region and keep this status when the page is sent.

  Someone has an idea how to do this?

  Thanks in advance for a suggestion to work!

  Theresas

  You have almost all the way.

  As you have probably already understood, the problem is that the code requires that regions begin closed and it will 'click' to open.  If you're one of them is already open, you have now two inverse regions.

  I think that it is better to have them both be areas closed, when the cookie should be created (we were a new cookie for that) then "click on" one you want to open and create the cookie with this region in.  From that moment of the code can continue to click on the one that was left pending.

  So, I added more code to the initial opening. I introduced the P2INIT cookie which will be set to YES the first time the page is visited.  Its only purpose is to open the region to report on the first visit.

  After that, the logic can circulate to store regions that can be opened.

  Also, I have completed the static ID of the report to better reference by name.

  Now, I have to say, if you are presenting the same data, but a game is available to edit in a tabular form, something like Page 3 would work?

  When you click on edit the grid it will hide the report and view the form in a table. When you click 'View report' he hide the form tab and view the report.

  I think it's a clean approach and the data are not queried the DB double. It also avoids the flicker of the openness of the region.  Just an idea.

  I use preferences instead of cookies.  The nice thing about the preferences, it's that they are saved in the DB for the user, so if the same user logs on to another computer or a browser preference comes with them.

  Thank you

  -Jorge

• Hide / show the area to click on the link

  Is it possible to see the region based on clicking on the link in the area of differentiation of the same page
  
  Published by: 893185 on April 30, 2012 13:42

  Hello
  Yes, you can do it.

  SELECT 'click to view' link,
  text_description from test_table;

  Lets say you have a region with static id "Show_Region" to be posted on click.