Is it possible to display full-screen Desktop App?

Similar Questions

• 2301 x does not display full-screen

  My x 2301 is not display full-screen 1920 x 1080 at 60 Hz on my computer system. graphics card is the Radeon HD5870. Hope someone can help me with this problem. Thank you

  I found the solution for users of cards AMD graphics card. Right-click to open Catalyst Control Center - graphics on the top left corner - computer desktop and displays - there will be an icon of the small screen in the lower-left - click on the black triangle - set up - Scaling Options - slide the bar to 0% overscan - FACT

• Firefox does not appear in "partial" mode I can't get the display full screen or reduced display, not the intermediate partial screen window.

  The 'partial screen' icon does not work. When it is selected, the screen is reduced to the minimum. (Hover displays the text 'restore down', that doesn't look right.)

  When the screen is reduced to a minimum, I have to hover over the preview, right - select optimize for any screen at all, and it's the display full screen.

  Difficulty? I tried to uninstall/re-install has not fixed the problem.

  Hello rclacher, try this to reset the settings of user interface in firefox: go in firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open upwards - in there remove the file named localstore.rdf - it will be regenerated the next time you launch the browser.

• How can I make the screen display full screen under XP?

  I have an acer 23 inch led.  This isn't quite a real 23-inch screen im trying to get the full screen. I need help I forgot how my friend got the full 23-inch its really simple prob... Thank you

  Hi RyanRoeser,
   
  -Are you talking to display full-screen applications?
   
  You can click on the F11 key at the top of your keyboard to view the full-screen window:
   
  For more information, see the link below:
   
  6 useful tips from Windows

• Is it possible to do full screen Windows Media Center (native) on a monitor while being able to use the other monitors in a multi-screen configuration?

  Personally, I have a dual monitor situation, and sometimes I would watch television on an all always doing work on the other. If I maximize the Media Center window it will display full-screen on one monitor but it disables all features on the other. The only way for everyone is stretching as it can on the monitor/display without infringing the workspace of the other monitor, but it is ineffective because it does not display the full screen to a native resolution.

  If there is not a current solution for this, then it must be addressed by the engineers of Windows like watch TV on the computer, and multi-monitor configurations are becoming increasingly important in the houses.
  I appreciate the help. Thank you!
  Another Windows user

  After you start your support, press alt + tab to exit the Media Center window. Media Center will stay full screen play the media, and you can use the main screen as usual.

  This works better if Media Center is on the second screen without the taskbar.

• Use all displays full-screen will only clone, not extend

  I upgraded Tech Preview in July when asked last week.  Before the update, I had two working in two different Windows 7 computers virtual screens.  Since the update, view, use all displays full-screen will only clone, extend to the screen.

  It happened when I originally installed the Tech Preview as well.  In this case, I managed to toggle putting forwards and backwards and it started working.

  When I look to the customization of the display under windows it only shows a monitor and it does not find another when I click on "Detect".  I am able to use views independently under MacOSX.

  It is the Lion of mountain, MacPro, Late Model 2009 22 GB of memory.

  What should do?

  Thank you

  Dale

  Ah ok.  You use the value of the experience of the user as an indicator of video driver problems.  Also, when you suggested, update the video driver you just wanted to make sure that the latest VMware tools has been installed.  Ok.

  Had already checked those things and I had used the menu VMware to reinstall the tools.  Value of my user experience was 4.7.

  In any case, it seems to have been a problem with the tools VMware install because after I followed the instructions to manually install it here: VMware KB: installing the VMware tools on a Fusion VM running Windows, making a repair, everything's fine.  My video driver also shows a date of July 2013 now.

  Thanks for your reply.  He helped.

  Dale

  Post edited by: DaleHohm

• Hi, Hello: I am trying to create a Web site and don't know what to do to display the content of my web browser to display full-screen itself without any empty space.

  Hi, Hello: I am trying to create a Web site and don't know what to do to display the content of my web browser to display full-screen itself without any empty space.

  If you are looking to exhaust the entire screen with content regardless of the size of the browser called sensitive sites and unfortunately that are not supported in Muse. However, you can have some content such as backgrounds, slideshows and videos be full width.

• Photoshop elements Organizer 11: display full screen of low-grade with PES 10, before?

  The upgrade of the PES 10 to 11, I noticed that when I look at my images with the Organizer in PSE 11 in full display mode screen (F11), while the images load faster, they are presented in a lower quality PES 10 or any other version of the EPS I owned before. In PES 11, after first viewing in full screen (in "fit screen" mode), when I click with the mouse on an image to view the '100% ', there is a delay and the program says "Loading"... ", after which 100% in the mode display full screen. When I click and then once with the mouse on the image to return to "fit screen" mode, I get a better image quality than when the initial view!

  So it seems that the program first gives a faster display, but more low quality of the image in full screen mode, and only after that the user requests a 100% view, it actually loads the image with all the details, which are then kept when to return to the display "fit screen". It is a serious problem for me, because I also use PSE Organizer to show my photos to other people, and I don't want to show them some versions of lower quality of my images, but the full quality, without having to first select 'view 100% ' and then go back to "fit screen".

  How can I make the Organizer PES 11 give me a good quality image full screen right away, because it used is the case in PSE10 and before?

  (I now have two versions, 10 PES, and PES 11 on the same computer and tested to confirm that the initial view full screen of PES 11 is lower quality than 10 PSE one.) Also in PES 10, there is virtually no delay for the '100% ' subsequently view display, indicating that the image has loaded with a lot of details right now.)

  Support adobe today confirmed me that there is a new feature of PES 11: When you press F11 in the Organizer, the image full screen that discover you is actually a miniature pre-recorded with a lower resolution. Only after that you look at the image in full screen at 100%, it loads the image full resolution, that's why there is another delay load in this step. This has changed from previous versions, including 10 PES, apparently in order to save memory and make the program more quickly.

  However, actually, that means that after all the work, a photographer did, using expensive equipment in order to obtain sharp high-resolution images, the PES 11 Organizer allows them to watch you in full screen only as a miniature! (Unless, of course, whenever you click first at the sight of 100% and then back to the 'fit to screen'.)

  They have taken this up to the next higher layer of support, at least. I hope they make at least an option to load the image of good quality immediately when pressing F11. (As it was in previous versions of PSE).

• Compare the speed of display full screen: PSE8 vs PSE5?

  My workflow requires fast full screen showing in organiser of a few hundreds of RAW files in a session.  I PSE5 now and traffic flowed well when I was working with jpg files.

  Now, every RAW photo takes about 8 to 10 seconds to come against the dry 1 to 2 w jpg alumni.  IrfanView is a very fast in the visualization of a RAW file after another, but it only works for files in a folder of successive WinXP.  I need to call several files with a common set of tags and these quick screen.

  Done PSE8 fast full screen display of a file in a file?  How fast?

  [I tried to install the evaluation version of PSE8 in Sandboxie because I was worried about damage if I disliked PSE8 but my installation did not work.  Error Msg: "License for this product has stopped working" error 148.3
  so I come to you for help.]

  Thank you very much for your advice.

  Upgrading your computer may provide modest improvements in speed display full screen of the PSE 5, it is not going to provide dramatic improvements.  PSE 5 I haven't looked in detail, but PSE 6-8 full-screen is ill-conceived.  If you keep your drive defragmented and put the maximum amount of memory on your computer (usually about $35 / gigabyte these days), you will get most of the benefit of moving to a new computer on this issue.  Your current graphics card is more pretty fast.

  If after the defragmentation and upgrade memory, you are still not satisfied, I suggested to thnk Paige moving to Lightroom will provide much better bang-for-money.

• Remote - problem with full screen desktop

  I use Win 7 for a few months now, and the user experience is great!

  Remote Desktop software update is large but with a very annoying problem that I am facing.
  I use this to access my PC on my home LAN. I left once his mode full screen I need a windowed mode to work, but since I was not able to return to full screen. I tried to restart the sessions remotely, Resart the two PCs, delete the information identification, but in vain.

  Kindly help to solve the problem, because it is very annoying to use the session remotely in windowed mode, navigate and go down each time to access the taskbar and the address bar!

  Thank you.

  Hello
   
  Follow these steps and check whether the problem is resolved.
   
  Method 1:
   
  -Start "Remote Desktop connection".
  -Click on 'Options '.
  -Click the "View" tab
  -On "Display Configuration" settings, you can change the display of "Remote Desktop connection" by moving the slider of "small to large.
  -By moving the "slider" all the way to large, the display settings will automatically set in 'full screen '.
   
  Method 2:
   
  You can try CTRL-ALT & Break to return to the screen in full-screen.
  For more information about the remote desktop connection it see below section of Windows Help.
   
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Can't display full screen

  I reinstalled my windows Vista disk now I have a small screen and it cannot set a mode full-screen. I followed the setting display it says its full screen, but it is very small. Can someone help me solve this problem?

  Windows Vista 32 bit

  Sony Vaio laptop computer

  On Mon, 13 Sep 2010 17:05 + 0000, DoriMac wrote:
   
   
  > I've reinstalled my windows Vista disk now I have a small screen and it cannot set a mode full-screen. I followed the setting display it says its full screen, but it is very small. Can someone help me solve this problem?
   
   
   
  You must install the correct Windows Vista drivers for your video
  Card and maybe your monitor. Bring them to their manufacturer
  Web sites.
   

  Ken Blake, Microsoft MVP

• No display full screen w/Win2008 R2 invited in Win7 home

  I have 7 Workstation running on a host Win7 64 bit with the host set to 1920 x 1200 resolution.   I installed Win2008 R2 as a guest for testing purposes - all is well except that I can't view the virtual machine mode "full screen".  I just get a black screen.   The mouse cursor is active and keeps track of the slider that I move the mouse.  Just can't see anything else on the screen.  If I exit full screen, the display will return to 'on '.

  Looks like it is a problem to start in this particular resolution, but that's just a guess.  XP and Win2k both work mode full screen without any problems.  Any ideas?

  Thank you!

  Mark

  Looks like a problem with the ram video comments. Did you have the 3D acceleration enabled in your virtual machine? You can verify that the UI-> virtual machine-> Configuration-> display

  Thank you.

• My new sites pinned tab only display full-screen mode. What happened only since the update of Firefox.

  I have my best sites 'pinned' to the new tab. Since the update of Firefox do show that the first four sites (top line) and I can't drag/release those missing bookmarks.

  I have just discovered that the sites are still there but only appear when I select the mode "full screen".

  Is there a way I can restore the page to show two lines of pinned sites without being full screen mode please?

  It seems that there is a regression with 39 Firefox on the new tab page. A bug report has been filed on 4 and the triage team responded.

  I saw the same thing with the difference in mode full-screen during the test of this "change"; the 'missing' line appear in full-screen - but with the resolution of my screen, I could see two rows of tiles, the 3rd rank was not missing mode full screen.

  Overall, I think you should try the new tab extension tools and see how you like it.
  https://addons.Mozilla.org/en-us/Firefox/addon/new-tab-tools/

  I use that in a number of my Firefox profiles. Profile where I checked this problem which has been mentioned in a number of discussions of the forum over the weekend that I use rarely - I use it see how Firefox works as "installed", before making a change.

• Is it possible to get full screen on a Firefox Web site

  If it's doable by a CSS code or something or even an add-on

  You can manage permission to full screen via "tools > Page Info > Permissions" or by the subject: permissions page.

  • http://wiki.Mozilla.org/Gecko:FullScreenAPI
  • https://developer.Mozilla.org/en/DOM/Using_full-screen_mode

• How can I back off display full screen? my laptop F11 key does not work for this purpose, so is there another way?

  not much to add.

  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press on (fn +) F11.