Is it possible to have a connection to printer wireless and wireless Internet at the same time with Windows Vista?

Similar Questions

• possible to have 2 different application fields for two different clips at the same time

  Hello

  possible to have 2 different application fields for two different clips at the same time for the classification match in terms of the scope, only not to the eye?

  Not that I know of.  And Yes, it would be very useful. As would the ability to go back 2 in reading monitor and a button "game clip under the read head 1. Sigh.

  Neil

• Problem with the connection of two computers with windows7 to internet at the same time with wrt110

  Me and my friend have two windows7 installed on our computers.

  If one connects to the internet via a WRT110 wireless router it goes without any problems.

  But if we both try to connect to the internet at the same time, it does not connect.

  Can anyone help?

  You can try the upgrade/flashing the firmware on the router... Download the firmware from www.linksys.com/downloads and save it on the desktop... Opening of session in the Linksys GUI and click on the Administration tab... Click on the "firmware upgrade" sub-tab and choose the correct .bin file... click on upgrade... Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now, hold down the button to reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Is it possible to connect a printer HP 4622 to internet via the wire that I do not have a router?

  Hello

  This support of the wired network printer doesnot.

• Why I have Photo and Photos open at the same time?

  Why I have Photo and Photos open at the same time?

  When what's going on?  When you connect a camera or a card reader?

  Or after the Mac is restarted?

  If this occurs after startup, check system preferences > users and groups.

  Select your account and open the connection. Deselect the applications you want to open at startup.

  If this happens when you connect a camera, open the iPhoto preferences > general.

  Set the preference "Connecting camera opens" to "no application".

• Should I connect to the display, the vga cable and dvi cable at the same time. HP 1110 FP7

  Should I connect to the display, the vga cable and Dvi cable at the same time. I have a FP7 1110

  UNUSED - a connection only (from the source of the same cylinder head box) - always!
  DVI has better quality.

  C.

• I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?

  I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?

  When I wire any type of indicator, it is show that a release of a single channel.

  I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?

  I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.

  Thanks in advance.

  Yes you are right. I tried, but I don't have the result.

  I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.

  Thank you

• I saw the problem with Windows Live Mail gel but I have the same problem with Windows Mail.

  I saw the problem posted on Windows Live Mail gel but I have the same problem with Windows Mail. Sometimes, while mouse refuses I can scroll vertically with the keyboard, but not always... I changed to another wireless mouse, and this has not changed. I run Vista and can't find the update, that you reference. The reopening and closing program usually fixes it, but it's annoying. It happened for about 6 weeks or so.

  Can anyone help?

  I run Vista and can't find the update, that you reference.

  What update WHO refers to?

  Try to compact and repair the database.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

  And search for malware with the free version of this tool.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

• I have Adobe Acrobat 7.0 Pro and I just bought a new pc with Windows 8.  I can't find a download.  Is there 1 or Acrobat 7.0 Pro compatible and if not, is there a suggestion in addition to spend more money on another product?  Thank you.

  I have Adobe Acrobat 7.0 Pro and I just bought a new pc with Windows 8.  I can't find a download.  Is there 1 or Acrobat 7.0 Pro compatible and if not, is there a suggestion in addition to spend more money on another product?  Thank you.

  Hello

  According to the system requirements for Acrobat pro 7, it is recommended to use it on Windows 8 machines.

  However, you can try to install and run using compatibility mode. You can download it from the following link

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

  Note: as this product activation server is switched off, you will need to use the key to series mentioned next to the link to download during installation.

  For compatibility help please refer to make programs more compatible with this version of Windows - Windows help

• Is it possible to wait in a queue and a reporter at the same time?

  Hello!

  I'm trying to implement a model event producer/consumer with queues. The problem is that I have a certain value change events (for example from a slider) I want to make the tail upward; I want only the last value change events to be processed by the loop of consumption. That's because the consumer can spend more time in the execution (sometimes several seconds) and I want to warn all the events of middle slider to be queued up pending because I write them finally to the material. Therefore, a notification utility would be preferable to use a queue here. My question is if it is possible to make the same loop of consumers to wait in the queue, as well as on the warning system at the same time? I will be wiring the VISA session and other data through consumption, if she wants to avoid an extra loop that would wait on the registrant only. Or is there another possible workaround solution?

  Thanks in advance.

  Kind regards

  Anguel

  This example has a meaning?  It is based on Mark's original proposal.

  

• Is possible let activate domain multi UCS VM - FEX and sign up for the same vCenter

  Hi Experts,

  We have 7 domain UCS. But only a vCenter. Now, we want to enable VM - FEX on each UCS area and sign up for the same vCenter. Is - it work? I have found no description limit configuration on this relationship.

  Or we create 7 vCenter for each UCS area? (But I think it's not sense.)

  Best regards
  Meng-Yuan Hsieh (Nick)

  Hi Moua!

  I open a TAC case on that, and after that many discussions with Cisco, connecting several areas a single vCenter UCS is supported.  However, it turns out that Cisco failed to document this and how to make it work.  You will find that the procedures were written in old documentation for VN-LINK and others for VM - FEX.  This documentation shows that it is necessary to create new certificates, and it must match the key to expansion.  This is NOT true nor with the new versions of UCSM and vCenter.  Cisco, said they will update their documentation.

  Here are the steps that we took to connect two UCS areas for the same vCenter using default self-signed certificates.  I hope this helps...  Please mark this message as the right answer when you get a chance.  Thank you!!

  vCenter Version: 5.5

  UCSM Version: 2.2(5a)

  1. On the VM in UCS Manager tab, click VMware.
  2. Set up a key of the unique extension for every area of UCS.
  3. Click on "Configure VMware integration" on each area of UCS and export expansion of local storage.
  4. Install each UCS domain extensions in vCenter.
  5. After you install the extensions, back to UCSM and click Next where you left off in configure integration with VMware
  6. Run the wizard and after that it's over, areas of the UCS should now be connected to the vCenter.

  

• Is possible to set a user by default POV to all users at the same time?

  Hello world...
  
  I develop a report with the financial report and I want to set a default value for a dimension in the POV for all users. Because when I set a POV on my report it apply only to the user that I use for preparing the report. Other users connect to this report, it sets a default value of values other than the values that I have set myself. I tried to use a form of POV. It applies to the POV, I'm set for all users, but I am able to work with a grid at the same time.
  
  PS: Sorry if I wasn't clear enough!
  
  Kind regards
  Rafael Melo - Brazil

  Hi Rafael

  The ManageUserPov.properties will only fix the POV for one or more users at a specific point in time. As soon as a user opens a report and changes of this POV, then it is lost.

  I know what you're trying to do, but I don't think that there is a way to apply the kind of logic that you hope.

  There is a way of (or certainly used to be a way of) hardcode the POV in the report URL. I am sure that this worked when prior workspace Hyperion financial reports used to have its own web client. It's thinking is the basis of the road that linked the statement of work, that's why I suggested that you look at. You could try to find a way to open the report by substituting the POV by using this hard-coding in the URL or go with my original plan of hard coding a "landing page" type report with your default POV and then use reports related to take the user following a report in which they can change the POV as they wish.

  Hope this helps
  Stuart

• Output signal analog two at the same time with the SCC-68. Is this possible?

  Hello!

  I plug in my SCC-68 two things. You're driving in the ao0 (22 screw terminals) and aoGND (55 terminal screw) and a speaker in ao1 (terminal screws 21) and aoGND (55 terminal screw).

  I'm trying to generate a sugnal ao1 sine and a DC ao0 signal. Separately, they work, but at the same time they do not have...

  I had try in Labview SignalExpress and also...

  Any help?

  Thanks: Koli

  Hi Koli,

  already use you it in your code. The vi s Express that you marked with ao0 ao1. :-)

  Mike

• Can I have Photoshop open with my desktop and laptop at the same time with the account of the company?

  I already have two individual accounts for my husband and me, but together, we use and work on 4 computers, so we need their access at any time. At the same time I can work on Photoshop on my computer laptop and InDesign on my desk. I'm not the greatest to leave thoughts programs the day either. If at some point, Photoshop can be opened on all computers. Will this be a problem on the behalf of the company?

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Two activations may NOT be used at the same time (noted in the link above of the license)

  If you must have the program create open on 2 computers at the same time, look for a subscription of the TEAM, so each ID is unique

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

• Connect the iPhone to MacBook and Apple Watch at the same time?

  Hello world

  Is it possible to simultaneously connect the iPhone to the Apple Watch and MacBook via Bluetooth?

  Would be wise to have this feature to enjoy the continuity between all 3 devices (and taking calls, etc.).

  I tried to do this, but my iPhone and my MacBook do not connect to each other.

  Thanks in advance.

  My iPhone connects to my watch , 2 Mac, iPad 2 and 2 iPhones using the parameters of continuity. I can take and make calls on 7 devices when connected to the same WiFi network. For Macs, it must be new enough to support BlueTooth 4.