Is it possible to have an action that send an email?

Similar Questions

• Is it possible to create an action that moves an object?

  Is it possible to create an action that moves an object from its original position to another location?

  I think you can do it using the object effects.

• Tile bar missing e-mail message 'Write '. When I open a new email message to send, the tile bar disappeared. I have no way to send the email!

  Tile bar missing e-mail message 'Write '. When I open a new email message to send, the tile bar disappeared. I have no way to send the email! I believe that the bar of the tile is disabled, but I have no idea how to do to reactivate.

  Open a window of writing. If all the toolbars are missing, press the alt key to make the call of menu bar.
  The menu bar select View-Toolbars and rekindle the missing toolbars.

• I get a popup Alert PlacesUtils.NodelsLivemarkcontainer is not a function. There is a response button that sends an email to Andy Halford who folds

  I couldn't finish the sentence. After the function, it should read "there is a reply button that sends an email and I get an automatic response from Andy Halford saying that he cannot help, addons have been removed for a long time"
  I do not appear to feel the addons indicated on its website.
  I want to get rid of the popup - it only showed up after I upgraded to Firefox 25.0

  See this support article to help understand which extension is the cause of this message is displayed.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• The forgotten password go that sends an email to iCloud

  Hello

  My phone is the iPhone 5

  ICloud password, but I forgot my update of the phone.

  The forgotten password go that sends an email to iCloud

  I'm not available

  Please help me.

  IMEi = *.

  iCloud = *.

  < personal information under the direction of the host >

  There is a contact link.

  Apple ID support

  Apple ID support (2)

• dbms_scheduler - possible to have a job that takes place in 10-11 Mon - Sam, but Sunday at 11 just?

  Hello

  With the help of 11.2.0.3 and I was wondering if possible to have a dbms_scheduled job that runs at 10 and 11, Mon - Sat, but only 11 Sunday.

  Currently have a f = interval daily work which runs 10 and 11 all day and I was wondering if possible to change to reveal a turn at 11 Sunday rather than 10 and 11 or you must separate job Sunday for that?

  Thank you

  Hello

  You don't need 2 jobs for this, only 2 different calendars:

  BEGIN
  -- Daily mon to sat at 10 am and 11 am
  dbms_scheduler.create_schedule('mon_to_sat_sched', repeat_interval => 'FREQ=DAILY;BYDAY=MON,TUE,WED,THU,FRI,SAT;BYHOUR=10,11'); 
  
  -- Sunday at 11 am
  dbms_scheduler.create_schedule('sunday_sched', repeat_interval => 'FREQ=WEEKLY;BYDAY=SUN;BYHOUR=11');
  END;
  /
  

  Now to clarify these times for your business:

  BEGIN
  dbms_scheduler.set_attribute( name => 'YOUR_JOB', attribute => 'repeat_interval', value => 'mon_to_sat_sched,sunday_sched');
  END;
  /
  

• Is it possible to have a button that will insert a line of table rather than add at the end?

  I have a button Add line that works correctly using addinstance, but I would like to have the line button Add at the end of each line, if a user can insert a line in the middle of the existing/fiilled of lines.  Is this possible?  I would like to be able to do this using Formcalc because that's what my script in the form currently complies.

  Hello

  Yes, it is possible, but actually doing just that the script is to add a new line at the end of the table AND then move the line to the appropriate position.

  See examples here: http://assure.ly/gk8Q7a. Table 5 is a Table object, while table 6 is constructed using subforms. In both cases, the Index number is a button, which adds a line below the existing one clicked.

  See who helps me to,.

  Niall

• Possible to have a site that contains roll effects AND is sensitive? That is, pages with those separate effects?

  For example, here's what I ask on/research to:

  My home page has scrollbar effects. Is that what I can keep this page with scroll effects (and available phone alternative)? It would be non-compliant, I'm aware.

  BUT, I would have other pages within my site that wouldn't be sensible indeed, but wouldn't roll effects and does not require the alternative layout.

  The combination of two things is possible? Just to separate the pages from the same site? I hope that makes sense.

  Thank you!
  -Kristine

  Yes. You can mix design adaptive and responsive.

• Is it possible to create an action that will trim guide lines? Thank you.

  Hi everyone, I have set the guidelines on several images, is it possible to crop to these lines of guide as opposed to manually? Many thanks.

  See the script for the snap of harvest (no delete pixels) in the ruler guide

  do cultures based on 4 guides;

  2014, use at your own risk.

  #target photoshop

  If (app.documents.length > 0) {main()};

  function.

  int main() {}

  the value pixels and 72 dpi.

  myDocument var = app.activeDocument;

  var originalRulerUnits = app.preferences.rulerUnits;

  app.preferences.rulerUnits = Units.PIXELS;

  var originalResolution = myDocument.resolution;

  myDocument.resizeImage (null, null, 72, ResampleMethod.NONE);

  If (myDocument.guides.length == 4) {}

  Download the guides;

  var theVert = new Array;

  var theHor = new Array;

  for (var m = 0; m< mydocument.guides.length;="" m++)="">

  If (myDocument.guides [m] == Direction.HORIZONTAL) {theVert.push (myDocument.guides [m] .coordinate)}

  else {theHor.push (myDocument.guides [m] .coordinate)}

  };

  jabot;

  If (theHor.length == 2 & theVert.length == 2) {}

  cropThis (number (Math.min (theVert [0], theVert [1])), Number (Math.min(theHor[0],theHor[1])), number (Math.max (theVert [0], theVert [1])), Number (Math.max(theHor[0],theHor[1])))

  };

  };

  reset;

  app.preferences.rulerUnits = originalRulerUnits;

  myDocument.resizeImage (null, null, originalResolution, ResampleMethod.NONE);

  };

  culture.

  function cropThis (x 2, x 3, x 1, x 4) {}

  // =======================================================

  var idCrop = charIDToTypeID ('Crop');

  var desc7 = new ActionDescriptor();

  idT var = charIDToTypeID ("T");

  var desc8 = new ActionDescriptor();

  var idTop = charIDToTypeID ('Top');

  var idRlt = charIDToTypeID ("#Rlt");

  desc8.putUnitDouble (idTop, idRlt, x 1);

  var idLeft = charIDToTypeID ("Left");

  var idRlt = charIDToTypeID ("#Rlt");

  desc8.putUnitDouble (idLeft, idRlt, x 2);

  var idBtom = charIDToTypeID ("Btom");

  var idRlt = charIDToTypeID ("#Rlt");

  desc8.putUnitDouble (idBtom, idRlt, x 3);

  var idRght = charIDToTypeID ('Rght');

  var idRlt = charIDToTypeID ("#Rlt");

  desc8.putUnitDouble (idRght, idRlt, x 4);

  var idRctn = charIDToTypeID ("Rctn");

  desc7.putObject (idT, idRctn, desc8);

  var idAngl = charIDToTypeID ("Marko");

  Bryan var = charIDToTypeID ("#Ang");

  desc7.putUnitDouble (idAngl, Bryan, 0.000000);

  var idDlt = charIDToTypeID ("Dlt");

  desc7.putBoolean (idDlt, false);

  var idcropAspectRatioModeKey = stringIDToTypeID ("cropAspectRatioModeKey");

  var idcropAspectRatioModeClass = stringIDToTypeID ("cropAspectRatioModeClass");

  var idtargetSize = stringIDToTypeID ("targetSize");

  desc7.putEnumerated (idcropAspectRatioModeKey, idcropAspectRatioModeClass, idtargetSize);

  executeAction (idCrop, desc7, DialogModes.NO);

  };

• I have a virus that sends emails to everyone in my address book.

  Messages are empty or have no content object or a link that is not connect. Norton says this isn't a virus, MS scan did not detect a virus. What's next?

  Messages are empty or have no content object or a link that is not connect. Norton says this isn't a virus, MS scan did not detect a virus. What's next?

  Hey Florida pavier

  you don't say what e-mail program or the operating system

  Download update and scan with the free version of malwarebytes anti-malware in safe mode with networking

  http://www.Malwarebytes.org/MBAM.php

  You can also in safe mode with network download and run rkill to stop the problem before you download and scan with malwarebytes process

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• Is it possible to have Acrobat Javascript to send a message to VBA Excel?

  In short, what I'm trying to do is in the East to the code a button in an Acrobat of the file which, when pressed, will run some Javascript in Acrobat - say, app.alert ("you pressed me!"); and also somehow calls a routine in an Excel VBA file - say msgbox "which is good, you press this button in Acrobat!"

  
  

  Of course, it is trivial to make the first part. But the second part seems like he expected to be easy, but that it could be impossible.

  Is it possible to send a message to VBA whenever a particular event (such as a button press) occurs in Acrobat?

  (I can create a little slow and clumsy work around by creating a global variable in Acrobat Javascript that updates every time you click on a button and then permanently questioning the value of this global to Excel using getJSObject variable.) But in my particular project, this is undesirable and I hope that there might be a cleaner and more direct way to accomplish the same thing).

  I hope it is impossible by any means.

• Create a simple form that sends an email with the data

  I am creating a form of simple command for our Web site that allows people to fill out their name and address and have these data by e-mail to me.  I'm familiar with Dreamweaver, but have never looked into this kind of thing before.  I've read several tutorials on the use of PHP script to do this and he's going to 'confirmed' url after clicking on send, but I never have the e-mail.  Our site is hosted on GoDaddy.

  Could someone guide me through this process, or at least point me in the right direction?

  Thank you.

  Here is a link to a video tutorial that can help.

  http://www.Tutvid.com/tutorials/Dreamweaver/tutorials/phpFormHandler.php

• Why didn't - it not matching my Contact form that sends to email?

  I created a contact form in my adobe muse Web site.

  Under the by email to: section I entered the email I want to received these contact forms
  
  After uploading my site to the ftp host, I get a pop-up notification that says:

  Form Contact form join us is configured with a < Email address example 1 > email address.
  Is not the name of the server < Email address example 2 >.
  Some hosts refuse to send e-mail messages from email addresses on different hosts.
  If your form sends email as expected, change in the first e-mail address
  in your Muse in the form of an address (website URL), and then try again.

  
  

  I'm not sure how to use an email of my choice to receive these forms. Could someone help me with this problem?

  Muse on publish will show this message, because some hosting providers set up their sender as it will only PHP send to an e-mail address on the same domain. Generally hosting server works with email different domain, but in the case where your hosting server restricted email to different domain then you need to work with your hosting company.

  Thank you

  Sanjit

• avoid to perform actions that are in the presentation at the beginning of the workflow layer

  Hi all

  Is it possible to perform NO actions, that are defined on the presentation layer, at the start of a workflow?

  On our supply workflow contains a step where we select the cluster to build the virtual machine. Once all the other objects required has been selected will be calculated automatically.

  This means that in the next drop you now get a list of all the hosts that are members of the selected group. We do the same thing with the networking and all data warehouses that we use for a virtual machine.

  All actions are mainly related to the 'list of preset of elements', "Data Binding" and "Default"

  The problem is that when I start the workflow I have, of course, a lot of error messages in the log file because I did not choose a cluster at this stage. Also it takes a while until the presentation layer will be shown.

  Can I do to avoid actions that are related to the presentation of the workflow? And make them run when I chose a cluster object?

  Thank you very much!

  The best practice is that the first line of your action must be one if (cluster == null) return null;

  This will speed up the presentation a lot.

  Another more complex way is to use a disclosure ognl expression, but they are difficult to maintain and may not give any gain on the action and returns null.

• script or action that removes the invisible layers.

  Hello

  I'm looking to automate deleting weather invisible layers they are in groups or locked.

  I currently have an action that:

  Selects all layers,

  runs a command of 'blocking layer' with all the options to unlock all layers, uncontrolled

  delete hidden layers.

  It works well enough, but the problem is: If there is a closed group, open it all layers command does not work on it and all else fails.

  is there a way to do this with actions?

  and if not I tried to do a rudimentary script for her

  so far, I have this

  for (i = app.activeDocument.layers.length; i > 0; i--)

  {

  if(App.activeDocument.Layers[i-1].allLocked) app.activeDocument.layers [i - 1] .allLocked = false;

  If (! app.activeDocument.layers [i - 1] .visible) app.activeDocument.layers [i-1] .remove ();

  }

  the problem is once again, it's that it doesn't work for the layers within groups.

  I found this thread delete all groups and layers that are turned off, even if they are locked

  and the script in there blocking my photoshop.

  any help would be much appreciated.

  To do this, you need to use recursion when you encounter a group of layers, you must treat its layers.

  processArtLayers (activeDocument);

  ///////////////////////////////////////////////////////////////////////////////

  Function: processsArtLayers

  Entry: document or layer set

  ///////////////////////////////////////////////////////////////////////////////

  function processArtLayers (obj) {}

  for (var i = obj.artLayers.length - 1; 0<= i;="" i--)="">

  try {}

  {if(!obj.artLayers[i].visible)}

  }

  catch (e) {}

  }

  for (var i = obj.layerSets.length - 1; 0<= i;="" i--)="">

  processArtLayers (obj.layerSets [i]);

  }

  }