Is it possible to implement automatic archiving?

Similar Questions

• Is it possible to implement the special keys to a program name

  Canned commands

  Is it possible to implement the special keys to program a name & address, etc.?

  In addition, if there is a low-cost program that does the same thing please let me know.

  Thank you

  Damon

  Settings - general - keyboard - replacing text

  It works for your needs?

• Records and their possible content to automatically sort in alphabetical order?

  Records and their possible content to automatically sort in alphabetical order? I'm tired of having to resort each folder and it's content when I add something new.

  The add-on SortPlaces may interest you.

• Is it possible to have automatic display without going through the iPad also require the word to reactivate?

  Is it possible to have automatic display without going through the iPad also require the word to reactivate?

  While at home, there is no reason to have the password, but I want the device to sleep to save battery when I put aside.

  You should be able to have the settings > general > Autolock set for a time while having parameters > Passcode > Passcode turn off - you'll still have to "slide to unlock", but not to enter a password

• How can I remove the automatic archiving on the outlook of acrobat add-in functionality?

  How can I remove the automatic archiving on the outlook of acrobat add-in functionality? We do not want our users archiving emails automatically.

  ID prefer to do with GPO

  Hi ewming111,

  The wizard provides only the UI to configure Acrobat itself. You're talking about the function is provided by the PDFMaker add-in.

  The preference is apparently (starting from a quick test) HKU\S-1-5-21-762979615-2031575299-929701000-51250\Software\Adobe\Acrobat\PDFMaker\10.0\Ou tlook\Synchronization\Outlook\Enabled: 0x00000000.

  You can deploy via GPO, using the function of register of the wizard, or any other method that you use to propagate the settings.

  Kind regards

  Nicos

• Would it be possible to implement the application using DPS calculator?

  Would it be possible to implement the type of Calculator application using Adobe DPS that accepts a user input and pass it to the webservice API and displays the result.

  It can be done using html and java script. Message me if you want that I like to share an example.

• Is VMware 4.1 - possible to do automatic VM on host migration when LUN is near full capacity

  Hi all

  We have VMware 4.1 - is possible to do automatic VM on host migration when LUN is near full capacity.

  Suppose I have configure if a logic unit number is nearly 85 percent of capacity, I can do a configuration that VM will be moved to another host without any manual intervention.

  Thank you

  Saurabh

  Welcome thr community - first question I have is how you configure your virtual disks - you're thick or thin provisioning - if you use thick Provisioning, the size of the virtual disk won't grow - if you use Thin Provisioning disks will develop as spaced is used in order to run in a situation where you run the risk of cluttering the VMFS datastore - this risk is the reason why best practice is not use Thin Provisioning for machines of production

  Now, to answer your question - first thing to keep in mind vmotion does not move when the virtual machine is stored it simply moves the execution instance of the virtual machine to an ESXi host to host anotherESXi. You take advantage of Storage vMotion - but in vSphere 4 storage vMotion is not automatic.

  With vSphere 5, that you would be able to use Stirage DRS and that will automatically pass the virtual machine as the disk fills up.

• Is it possible to implement the id of an element inside the Muse?

  Is it possible to implement the id of an element inside the Muse so I can access it via javascript? I know that I can put my own html code, but this way I can't use the program interface to change. I can not use the id that generates muse because it changes every time that I add if I use it as a .mulib.

  The way I do rigth now is looking through the page elements that have a certain element of text that I left to label it. It's a horrible hack, I know. Any suggestions? TNX

  There is no way to add an ID, but if you assign a paragraph or a graphic style to the object, Muse honor the name you give it as a standard class spaces.

  David

• Disable automatic archives of the Outlook plug-in (Acrobat 2015 DC)

  Rather than eliminate the PDFmaker any plug-in of my deployment of Acrobat 2015 DC, can I disable only the automatic key archiving feature?

  This feature would be inconsistent with our company policy.

  I use the Adobe Customization Wizard.

  Is there a setting in the registry to apply?

  If you talk to remove the PDFMaker Outlook, which can be removed without removing the PDFMake features in Word, Excel and PowerPoint Plug-in.  However, the granularity to remove this feature Archive the PDFMaker Outlook plugin, so no, this is not possible.

• Is it possible to do 'automatic' on SB - 9636 RIO

  Hello

  I want to know, if it is possible to make some sort of "automatic" to the analog inputs of the SB - RIO 9636 map.

  The average is to increase the precision, if small voltages are used.

  But I'm not sure if will be something destroyed, if I apply a voltage high in a sensitive range.

  Do you have any tips or tricks?

  Best regards

  Ruedi

  Hi ruedi,.

  The maximum voltage of work of each beach is also mentioned in this manual, here:

  

  Anything outside these beaches is not supported or recommended.

• Is it possible to implement two different 'profiles' or 'locations' to my network settings?

  De : RevMDR

  I have a wireless home network that automatically assigns the IP address and the info for my new laptop (Vista).  At work, I have to manually enter the IP address and the following info to get a Wi - Fi connection.

  Is there a way to Vista to implement two different 'profiles' or 'locations' I can easily go to change my IP settings, so I don't have to go to network connections and change them whenever I passes between the two places?

  If Vista is unable to do this, is there a program I can buy/download that will do for me?

  Thank you!

  I have not tested on the wireless, but I do work on the connected.

  This how to can help, ipconfig

  How to set up multiple addresses on NIC IP how to configure two IP addresses on a computer

  How to use MS DHCP in order to reserve an IP address on MAC, how to use the TCP/IP protocol without

  Installation of a NIC...

  www.howtonetworking.com/Networking/ipconfig.htm--

  Bob Lee, MS - MVP, MCSE & CNE

  Networking, Internet, routing, VPN Troubleshooting

  http://www.ChicagoTech.NET

  How to setup Windows, network, VPN & remote access on

  http://www.HowToNetworking.com

  De :  Robert L. (MS - MVP)

  Another response of the community of Windows Vista discussion groups

• Possible to have automatic playback of scrollable content?

  I wonder if the scrollable content that I've implemented can be set to auto-play when the page is loaded, and then when I touch this place or on the iPad the car stops playing, and when I touch once again he times.

  Hi Jonas,.

  It is not possible to do so with our scrollable frame.

  Neil

• Is it possible to implement a login and a password for viewers to have access to a site of generated muse?

  A customer asked if we could implement a login and a password (login owner) for their potential customers visit their Web site. They don't want the entire site to be public, but wishes to offer a login and a password for customers to be able to check their site for a period of time. Is it possible within the MUSE?

  Hello

  Please check the following discussion

  Re: How to create an entry page protected password for a site of muse?

• Is it possible to implement the sequences to browse to project with several tables of contents and conditionalized modules

  I use RoboHelp 9 with WebHelp output.

  I have five outings, which one contains help for common functions, while the other four contain help for modules under license. When a user opens a module under license assistance, the user sees the soul help and authorized assistance. In addition, the files are conditionalized so that the unauthorized search a help licensed module brings nothing.

  I have been solving problems with the previous topic and the next topic which, thanks William, I learned are associated with browse sequences. After having tried various configurations, I have a few questions:

  • HR support a sequence to travel alone in a project, even when the project has several outputs & fakes?
  • If HR supports a sequence to browse only, does that mean that there is no way to create a unique navigation for each separate output sequence?
  • If HR supports several sequences of travel, which is the workflow?

  I also maintain a table of 'master' contents which contains all the modules, frequent and without a license. What I've done for now is to autocreate a browse sequence based on the table of contents "master." When I generate the output of a module under license, which is conditionalized, I only see the table of contents for this module and, therefore, can only travel between books and subbooks for this add-on. I also checked that the subjects that do not appear in the module conditionalized as for another module licensed, do not appear in the list of search results either.

  Carol

  Me again, Carol

  You also questions about the functional differences between WebHelp and WebHelp Pro, so let me explain.

  I know only two major differences other than (the additional benefits of analytical feedback reports) and the management of 'Zones' with authentication in RoboHelp Server.

  1. The behavior of browse sequences as explained above
  2. The fact that the categories of content are not supported in WebHelp Pro for this latest version 9.

  In regards to sequences to browse you try to anticipate the various modules (licensed, etc.): multiple browse sequences are included in an single . File BRS. Sequences are defined in the XML code in the single file.

  As a solution (for WebHelp and WebHelp Pro), you could create a Help.brs of the NPM. that you have already created a module; then backup and archive. Then create a change for the different module before generating again. The Help.brs of the NPM. will need to have the same name as your project, so you will have to manage the .brs desired file in the project folder when you build this version. All your other choices (table of contents, Index, conditional tags, etc) remains the same for the respective modules.

  Finally, I notice that you generate apparently WebHelp Pro right now even if you are not published on the server of HR? This is really not the best practice. You must generate WebHelp plain for a web server that has no HR server on it (even if you can be getting away with it). Regarding your concern about "breaking" something; each output is placed in another! SSL! folder automatically when you build, so you should be able to generate WebHelp without interfering with the release of WebHelp Pro. Then, you can republish on the HR using WebHelp Pro Server, whenever the server is ready.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Unable to log automatically archived on STANDBY DB

  Hello to all the experts,
  
  I am facing a problem while I do WATCH practice db.
  I use VMWARE pre-installed for my practice. In this, I'm a machine as one main & another server waiting.
  I use Windows XP SP-2 on both the machine & I have install Oracle 10 g on both the machine.
  To transfer automatically the journal archived from the primary server standby db I use this command: -.
  On the principal server: -.
  SQL > alter system set log_archive_dest_2 = 'SERVICE = blore reopen optional = 20'
  After you set the log_archive_dest_2 parameter, I modify the journal by this command: -.
  SQL > alter system switch logfile;
  But my side db ensures I don't get archived the main server log automatically.
  My tnsname.ora for primary side is: -.
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  BLORE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.73.132)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = blore)
  )
  )
  
  BLORE_STANDBY =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.73.134)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = blore)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  I don't know what you know.
  Please, help me out of this problem.

  Hello

  It seems to be the problem of password standby file. You can recreate or copy the password in standby mode and try again.