Is it possible to pass the portfolio across AdobeIDs sites?
I want to transfer my site Adobe Portfolio of my work to my own account. Is it still possible? Or would I need to rebuild the site on my personal account.
Looks like we you helped through our ticketing system. Have a wonderful day!
Tags: Adobe Portfolio
Similar Questions
-
If it is possible to pass the variable of type table in sceduler.
Hello
need to schedule a task to call a procedure but procedure a array as a parameter.
Let me know we can pass the type of object as a parameter in the Scheduler.
procedure definition: procedure (number, varchar2, ch. pakage.table_type b)
I don't think that you can do with a PL/SQL type in a package, but you can do it with a SQL type, as shown below.
Scott@orcl12c > test_tab CREATE TABLE
2 (col1 NUMBER,
VARCHAR2 (30) 3 col2.
col3 4 VARCHAR2 (30))
5.
Table created.
Scott@orcl12c > CREATE or REPLACE TYPE table_type AS TABLE OF VARCHAR2 (30);
2.
Type of creation.
Scott@orcl12c > test_proc CREATE OR REPLACE PROCEDURE
2 (a NUMBER;
3B VARCHAR2,
4 c. table_type)
5 AS
6 BEGIN
7 BECAUSE I have 1... c.COUNT LOOP
8 INSERT INTO test_tab (col1, col2, col3) VALUES (a, b, c (i));
9 END OF THE LOOP;
10 END test_proc;
11.
Created procedure.
Scott@orcl12c > SHOW ERRORS
No errors.
Scott@orcl12c > START
2 DBMS_SCHEDULER. CREATE_JOB
3 (job_name-online 'test_job',
job_type 4-online "procedure_stockee."
5 job_action-online 'test_proc. "
6 number_of_arguments-online 3);
7 DBMS_SCHEDULER. SET_JOB_ARGUMENT_VALUE
8 (job_name-online 'test_job',
argument_position 9-online 1.
argument_value 10-10 online);
11 DBMS_SCHEDULER. SET_JOB_ARGUMENT_VALUE
12 (job_name-online 'test_job',
13 argument_position-online 2
14 argument_value-online 'test');
15 DBMS_SCHEDULER. SET_JOB_ANYDATA_VALUE
16 ("test_job", 3, sys.anydata.convertCollection (table_type ("Oracle", "database")));
17 DBMS_SCHEDULER. SELECT ("test_job");
18 END;
19.
PL/SQL procedure successfully completed.
Scott@orcl12c > DBMS_LOCK EXEC. SLEEP (5)
PL/SQL procedure successfully completed.
Scott@orcl12c > SELECT * FROM test_tab
2.
COL1 COL2 COL3
---------- ------------------------------ ------------------------------
10 test Oracle
test 10 database
2 selected lines.
-
After installation of Windows 7 Service Pack 1, it is not possible to pass the graphics more
Hello
I am running Windows 7, 64-Bit SP1 on a Lenovo T500 with switchable graphics.
I downloaded and installed the Service Pack 1 manually (working on the Intel card) since it does not appear on Windows Update (now I now that it was because of outdated drivers Intel) - the installation went well. Later I tried to go to my Ati card but nothing happened and I realized that the Intel driver was apparently updatesd by SP1 (had a new design of the Intel tool). After playing around I got my Ati card active now but I can't switch back to the Intel card.
I uninstalled all the drivers graphics and deleted all graphics devices from the Device Manager and then installed the latest driver from Lenovo and also tried with the latest driver from Ati/AMD directly (11.2), but nothing has fixed my problem.
I can right click on my PowerManager battery and select the other card on "Switchable graphics", but nothing happens - no message error but also without change.
Every help is very appreciated.
See you soon
Dominik
Hello!
I just wanted you to know that the problem has been resolved after the Power Manager Update to 3.45 (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601&medium=rs...)
See you soon
Dominik
-
is it possible to pass the value of the variable validation function return Boolean message?
Assume that L_BATCH_NAME is the name of the variable which will receive the value as
declare
l_batch_name: = "NA";
BEGIN
L_BATCH_NAME: = FUNCTION (PARAMETERS);
IF CONDITION > 0
THEN
RETURN FALSE;
ON THE OTHER
RETURN TRUE;
END IF;
END;
Hi Reema,
ReemaPuri wrote:
Assume that L_BATCH_NAME is the name of the variable which will receive the value as
declare
l_batch_name: = "NA";
BEGIN
L_BATCH_NAME: = FUNCTION (PARAMETERS);
IF CONDITION > 0
THEN
RETURN FALSE;
ON THE OTHER
RETURN TRUE;
END IF;
END;
1. create a hidden item I say P1_HIDDEN_ITEM
2 type the error message for this element in your process of
declare l_batch_name:='NA'; BEGIN :P1_HIDDEN_ITEM := FUNCTION(PARAMETERS); IF CONDITION > 0 THEN RETURN FALSE; ELSE RETURN TRUE; END IF; END;
3 and refer to this element hidden in the error message.
Record for the batch '||&P1_HIDDEN_ITEM.||' already exists.
Kind regards
Jitendra
-
How to pass the traffic of a site VPN S2S by ASA to another S2S VPN site?
I have a need for hosts on separate VPN networks connected to my ASA corp to communicate among themselves. Example: Host A site 1 a need to communicate with host B on the site 2. Both sites 1 & 2 are connected via the VPN S2S. I would get every site traffic to flow through the ASA at the other site. Where should I start my configuration? NAT? ACL?
I can ping each host in the network Corp. but cannot ping from one site to the other. I set up same-security-traffic permit intra-interface and addition of NAT and rules the ACL to allow/permit 1 Site to contact Site 2. When I do a trace of package through Deputy Ministers DEPUTIES, packets are allowed to pass. I read different that tell no NAT y at - it something at the other end of the VPN to do? should NAT and ACLs rules be mirrored? Just in case, a site is an instance of MS Azure VM and the other is a 3rd party VM instance.
On the HubASA, can I set up a new card encryption that selects the Site1 Site2 traffic and protect the traffic and value her counterpart Site2 public IP or just add this selection of traffic to the existing encryption card for the existing tunnel between HubASA and Site2?
Just add this traffic to the existing encryption card.
Remember that this should be added on three routers (two hubs and there has been talk).
Site1
CRYPTO ip access list allow
Site2 subnet > CRYPTO ip access list allow
subnet training3 > CRYPTO ip access list allow
subnet HUB > Site2
CRYPTO ip access list allow
Site1 subnet > CRYPTO ip access list allow
subnet training3 > CRYPTO ip access list allow
subnet HUB > Training3
CRYPTO ip access list allow
Site1 subnet > CRYPTO ip access list allow
Site2 subnet > CRYPTO ip access list allow
subnet HUB > HUB
CRYPTO_1 ip access list allow
Site1 subnet > CRYPTO_1 ip access list allow
Site1 subnet > CRYPTO_1 ip access list allow
Site1 subnet > CRYPTO_2 ip access list allow
Site2 subnet > CRYPTO_2 ip access list allow
Site2 subnet > CRYPTO_2 ip access list allow
Site2 subnet > CRYPTO_3 ip access list allow
subnet training3 > CRYPTO_3 ip access list allow
subnet training3 > CRYPTO_3 ip access list allow
subnet training3 > Each of these ACLs is attributed to their respective crypto cards. CRYPTO_1 is assigned the site1 crypto map, CRYPTO_2 is assigned to the site2 crypto card... etc.
I hope that's clear
In addition to this, you need to configure identity NAT / NAT provides both the HUB and the spokes of sites.
--
Please do not forget to select a correct answer and rate useful posts
-
Is it possible to clear the history for select sites only?
I don't want to erase the whole story, just for sites I have accidentally opened or is no longer visit still continue to appear as suggestions whenever I start typing a web address in the browser field.
Just right click on the entries for "Delete this Page" or "forget about this Site"(pour une chaîne d'entrées). "» It's to win. I assume it's similar to Mac.
-
Is it possible to edit the HTML in a site of Muse generated in British Colombia?
I want to edit the HTML code that is generated in British Colombia, so I can move the JavaScript in the header and the body. What is safe or not recommended? If I bumble I can still download the site of Muse and crush my mess.
Hello
It is not recommended, but yes, you can make changes in British Colombia.
These changes will not merge in your file of Muse.
In addition, you must make sure that all links (Menu, links to JS and css are updated on each reference page)
And if you're wrong, you can publish the site again in Vancouver to overwrite the changes.
-
How to pass the user name dynamically in file .jca Oracle Apps adapter
My BPEL process using Oracle Applications adapter. Here is the file .jca for the adapter. The user name is statically initialized to "sysadmin" when I created the adapter. How can I change this to move dynamically during execution? Can I use an EL Expression or a variable of XPath. If yes how and what is the correct syntax?
Is it possible to pass the user name of the security policy of OWSM for the value of username below? If yes how? I appreciate your response.
" < name of the adapter-config = adapter 'EBSAdapter' = 'Apps' wsdlLocation =".. / WSDLs/EBSAdapter.wsdl "xmlns =" http://platform.integration.Oracle/blocks/adapter/FW/metadata « >
< UIConnectionName factory connections = "EBS1" location = ' ist/Apps/EBS1"UIConcurrentPgmName =" "UIOracleAppType = 'DBOBJECT' / >"
< endpoint-interaction portType = operation "EBSAdapter_ptt" = "EBSAdapter" >
< className = "oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec interaction-spec" >
< property name = "SchemaName" value = "APPS" / >
< property name = "PackageName" value = "JAN" / >
< property name = "Procedurename" value = "GET_USER_PROFILE1" / >
< property name = "IRepInternalName" value = "PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1" / >
< property name = value "Username" = "sysadmin" / >
< property name = value of 'Responsibility' = "system administrator" / >
< / interaction-spec >
< / interaction of endpoint >
< / adapter-config >
1. go on the Invoke activity
2. click on the Properties tab.
3. click on add
4 Add this 'jca.apps.Username' property and map with variable or expression.
5. fill the variable defined in the previous step with valid username values during execution.
I hope this helps.
Kind regards
Karan
-
Problem with passing the values in a report to the other
Hello
I am Agnes, I have developed 2 reports. Summary of the first high level, Mithraeum is detailed. First report is developed using Union (4 union), I have 4 columns. The report generates data. I used the Navigation option on customer column to go to the second report. In the second report with filter I use the easier option. Due to a problem, the customer value of the first report is failed per second. The second report is getting generated for all customers.
Normally, I have used this option to navigate through other reports and which works very well. I even tested with Union, it works. This time is to give some difficulties.
Please, let me know what goes wrong.
Thanks for the help.If your Union pivot source then by a simple navigation that you can not pass clicked value to the second report.
With the help of GoNaV you can pass the selected value source union pivot report to the non-Union target report. If the target report is also union pivot, then it won't pass filters using GoNav.Not sure that because someone talked about a few days back that with the help of GoNav possible to pass the value of a union pivot query to pivot anothet union report.
Kind regards
Sandeep -
Muse site, possible modification of the external host forms?
Hello
Is it possible to change the shape of a site that is done in Adobe Muse and is transferred to an external host?
I can edit the form on the website of BC, but I want to tt be this same form on my own website (external).
I thought I read somewhere that I can link the site of BC on my own site www.xxx.xx.
Yes, https://helpx.adobe.com/muse/using/in-browser-editing-websites-third-party-hosting.html
Thank you
Sanjit
-
Original title: Dual boot
My XPpro on a former player, was upward. then, I got another new drive, installed Win7Ultimate. Well, I got the OLD disk works with XP on it. But, some of these apps DO WORK not on Win7. so, at least for now, I have two drives installed on the same computer. is it possible to set up a dual boot, so I don't have to stop, and then pass the SATA cables that I boot to change? Operating systems already are on 2 different disks.
Hello
How to set up a Dual Boot Installation with Windows 7 and XP
http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.htmlDefinitive dual-booting guide: Windows 7, Linux, Vista and XP step-by-step
http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htmDual Boot computer preinstalled Windows 7 with XP
http://www.howtogeek.com/HOWTO/8790/dual-boot-your-pre-installed-Windows-7-computer-with-XP/I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Pass the product ID through the URL of the payment page for the 'reception - buy' landing page. is this possible?
You can just the module module_shoppingcartsummary and liquid, you can return the items in the basket to.
-
Is it possible to pass an argument to the function triggered by an event handler?
Hi all
Try to migrate my way of thinking in AS2 to AS3/CS4.
OK, I have 2 buttons on the stage. Each button almost did the same thing, so I want to create a unique function, and each button calls this function even (we'll name this function 'Navigate')... However, the function will have to end up doing something different dependent on which button was clicked.
If, previously, in AS2, I would have added the code on the buttons themselves with methods we (release) (see the SAMPLE CODE 1)
Thus, each button calls the function efficiently navigate and transmits a different image to the function tag.
Now, I try to recreate this feature in AS3. As you know, it (release) has been abolished (still do not know why), but we must now use event handlers, so I'll try to find a way to pass a different image to the function label argument to navigate. Currently, I can achieve that by using a switch statement to test which button has been clicked and act accordingly (see the SAMPLE CODE 2).
In this simplistic example, this works very well, but in the real world, I have more than 2 buttons and the function navigate would probably much more complicated...
So I would be able to pass an argument (as in the AS2 example) to the function to navigate... maybe in the addEventListener() method? I tried, but got compile errors (see the EXAMPLE CODE 3):
The issue of the $ 1 Million:
Is it possible to pass/change dynamically an argument to a function that is triggered by an event listener? (Or is the event that triggered the function the only argument you have?)
If this is not possible, I would like to hear how you people it would handle (other than to have a switch with 12 cases in there)?I found a few solutions that I'll post below for prosperity...
You can create a dictionary indexed by the targets of future events and store information in there you want to associate with them. Then the Navigate function check that the dictionary to get its parameters:
Code.
Button1.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);
Button2.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);var buttonArgs:Dictionary = new Dictionary();
buttonArgs [Button1] = "FrameLabel1";
buttonArgs [Button2] = "FrameLabel2";function Navigate(e:MouseEvent):void {}
gotoAndStop (buttonArgs [e.target]);
}This to me, is about the same amount of work than writing a long, but a bit more elegant switch statement, I guess.
I had a little trouble understanding the following solution, because I did not quite understand important information about event listeners. The addEventListener () method requires a function as the 2nd argument passed to it.
It didn't quite click on until someone reminded me: Navigate is a function... Navigate("FrameLabel1") is a callfunction...So by writing simply navigate, I'm not actually calling the function when calling the addEventListener method, I'm just providing the event with a reference the name listener. Then, when the listener is triggered, the listener will call (and pass a MouseEvent argument to) navigate the function.
Conversely, by writing Navigate("FrameLabel1") as 2nd argument, the event listener trys to run the function navigate both the addEventListener method is instantiated. And, since then, in this example, the function navigate returned as ": Sub" a compilation error would occur because as I said, an event listener requires a function as 2nd argument data type. This would be essentially as written addEventListener (MouseEvent.Click, Sub, false, 0, true)
However, there is a way to get around this... basically, instead of setting the function navigate as returning an empty data type, you define a function to return data type and then nest another function (which actually contains the actions you want to run) on the inside.Button1.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel1"), false, 0, true);
Button2.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel2"), false, 0, true);function Navigate(myLabel:String):Function {}
return function(evt:MouseEvent):void {}
gotoAndStop (myLabel);
}
} -
I just got my Halo 2 a few days ago Starkey. I noticed that when I get incoming calls on my iPhone 6, Halo 2 switches in position of memory 'Stream Boost' that increases the volume and picks up a lot of background noise. Is it possible to change the default iPhone meets the memory of another parameter memory.
No, you should contact the developer of the application to this topic.
-
Is it possible to change the external color of the iPhone?
I wanted to know if its possible to change the external color of the iPhone. My mother bought a pink iPhone, but she could not get used to it, so she gave it to me, and I want to know if its possible to pass to a rose grey.
Thank you.
None
Maybe you are looking for
-
I need to recover the old Claris works docs but do not have Pages Open Office does not work?
I need to recover an old Claris for Yosemite books
-
It becomes quite annoying that Firefox should update and change the layout of the browser so frequently. I like that Firefox is the addition of new features, but not if big I have to keep relearning to use the same program. Because there is no option
-
Hi all It is a way to get the limits of a stage and update to variables, so can be used in a custom interface panel? It will be very useful for my application. Thank you very much
-
Main VI does not show images of void / vi
Hello The "transformation" vi makes use of sub vi "dilate erode 2012". The sub VI works fine individually. But when it is incorporated inside the "transformation" vi images are not displayed. Someone help debug if you please. Thank you.
-
Envy 17-2100eo/W7-64: break the missing key - how to get around?
Hello I need to have the pause button so that I can use the combination CTRL + BREAK, that I need in some of my IDEs to stop the execution of process (race scripts/opening of the elements etc.). My keyboard is not... Is there a workaround known/no ma