No limits VBAI 2014 Get

Similar Questions

• Cannot open VBAI 2014

  Hello

  I have been using different versions of Labview, VBAI. Then I uninstalled all the software of NOR and reinstalled the Labview 2014 and 2014 VBAI.

  Now when I try to open VBAI, it does not pass the logon process. Attached to the screenshot.

  Sometimes it gives an error on an entry point cannot be opened in nivissvc.dll. I googled and found similar situations that explains the reason for the problem is IMAQ and Windows itself. I uninstalled the drivers IMAQ and nothing has changed.

  Also, I try to reinstall VBAI, and gave no results.

  Windows format is not an option for me. So, I wonder why this phenomenon happens and how to fix this?

  Moreover, I was able to use VBAI 2014 first place before uninstalling all software of NOR.

  Thanks in advance.

  Hello

  I removed all the software of NOR and installed VBAI and VDM 2013 this time. VBAI was once again on the start screen. And in labview Vision screws gave this kind of error:

  

  Then I seek redress Labview Run Time, but it was not listed separately. So, I try to repair Vision Run Time Engine.

  Now the above error is fixed, and I can acquire images in Labview, as well as in VBAI. I have not tried the VBAI 2014 yet and I do not intend to install it again

  But obviously there is something fixed to fix the engine to run Vision.

• VBAI Interface - Get Image-> Dest Image inspection

  I have a complete Vision algorithm built in Vision Builder AI and programmed a VI in Labview that started the algorithm and results used to calculate. It works very well. Connection between Labview and VBAI is correct and the results are updated. Now, I want to show the image of the VBAI in my Labview GUI using the VI 'VBAI Interface - get Image Inspection' of the Vision Builder AI toolbox. Everything I try to connect at the entrance of "Image transfer" of the VI I am unable to let it run and give an image appears. See attached screenshot for details.

  -What type of entry how can I put a link to get this working VI?

  -Where can I find more detailed information in the context-sensitive help on all these VBAI VI toolkit?

  You must use IMAQ create to create an image. You can see an example of this in the case of Vision Builder AI under API Examples\LabVIEW Examples\LabVIEW API example (local) .vi

  Hope this helps,

  Brad

• Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Just had help installation cc 2014. get this dialog box when I open the app. One or more files in the folder required for the operation of photoshop adobe are missing. Help

  Run the cleanup tool to remove Ps CC 2014:http://www.adobe.com/support/contact/cscleanertool.html .

  Restart the computer and then try to reinstall Ps CC 2014.

  Kind regards

  Ashutosh

• The initial launch of DW CC 2014, get following error: "cannot locate the resource file in the Configuration folder. This file is Spectialized to run Dreamweaver. Please reinstall the application. "This app has been updated through CC.

  I have to first remove the DW? With the help of PC Win 7.

  The error message: "Unable to locate the resource file in the Configuration folder", so it seems that something is missing. Could be a permission problem... I would suggest:

  1. go to a user admin account

  Connect using built in Administrator | Create the local admin account. 7, 8, Windows Vista

  Install or run Adobe applications in the new user account. Mac OS X

  2 remove the application DW CC 2014 by uninstalling or using the cleantool.

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html#uninstall apps

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  3. manually delete the directories of config according to KB: (you need to of course search the CC 2014 folder instead of the older versions in the KB)

  Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6

  This step will ensure that also the configuration file will be regenerated on re installation!

  4 reinstall on the new admin account and test again. If works please go back to the old account and test again.

  Good luck!

• [BUG] Timeline poster frame empty or invisible when it is not empty. (Flash CC 2014)

  Hello! I don't know why flash does, but at a certain point in my timeline a keyframe appears to be when the scene clearly shows a clip. Everything works normally, the clips spread properly and I can double click in and out of the it scene, I can even point to one of the apparently empty frames where the clip exists and it selects the clip on the stage. If it's not hinder my work, but it is a little disconcerting. y at - it anyone who has experienced this bug and found a way to solve it? I think it might have something to do with this flash being excessively long, 18 177 image file. But I'm not sure that this is necessarily the cause.

  I tried to restart flash and my computer.

  I tried to copy and paste the clip somewhere else on the timeline but it always also has invisible, or empty, in the timeline. It does same when I drag the clip on the stage from the library.

  I tried to copy the entire file in a new flash file and the same two clips are still invisible.

  Other clips from the library also refuse to appear in the calendar when you drag from the library onto the stage in the same place on the timeline. Clips placed on the stage, or created prior to this point in the timeline normally appear on the timeline.

  Screenshot:

  

  You can see how the clip is selected, indicated by the blue box on the stage and the frame of the timeline is selected, but the border appears as empty. This is clearly not empty. Any ideas?

  I don't know if it's important but:

  -two clips at the end of the animation are those in question, an image 18 177 file.

  -I am running on an iMac of 2013, OS 10.10.3, Adobe Flash CC 2014 build: 14.2.0.20

  It is not really a bug, it's a limitation, that you get also in other cases, the limit of width for bitmapdata instance.

  kglad solution works for frames up to 32000, and could in theory it takes an another movieclip in the last image of the movieclip inside, give you another 16000 images and so on. But there is another approach that might work for frames up to 256 million.

  I see that in your scenario, you have video clips which last as long as the sound that accompanies it. You could place each of these clips in consecutive images on the main timeline, and on every image, you would also have a sound event audio for this movieclip. Or you could put the audio of this movieclip into the movieclip itself, as its flow.

  In the first frame of the main timeline, you would stop, and action in the last frame of each movieclip, you might have this script:

  MovieClip (parent) .gotoAndStop (MovieClip (parent) .currentFrame + 1);

  When you play this at the playhead stops on frame 1 of the scenario main, then movieclip 1 will play to its effect, its own internal audio stream, either with a scenario main audio event. When it gets to the last image, it will tell the main timeline to go to frame 2, where movieclip 2 would play through his own, and the same script on its last image.

  In this way, you can have 16000 images on main timeline containing 16000 footage, 16000 views each.

• VBAI: How to correct the vignetting?

  One of my vision for the future projects will require a very sensitive inspection on a flat surface for the variations in light brightness.

  I intend to use a large ceiling fixture for a light almost uniform from all directions and use a lens of the sensor 1 "with a camera imager in a format more small low noise to reduce the effects of vignetting of the lens.

  However, even with these steps, I plan, overall image, there will be some amount of variation in the apparent brightness of surfaces.

  Clearly, if I was using Labview/Vision I could write a trivial VI to multiply each picture with a picture of correction (with a uniform surface of perfely).

  Is there a way to accomplish this effect in VBAI?

  Thanks in advance,

  Nelson

  Vision Development Module 2015, published in August, we've added the new field Correction screw flat that you can use to calculate or estimate the images of flat ground and the acquired images correct with it.

  Examples are found here:

  \National Instruments\\examples\Vision\Image Processing\Flat field Correction.vi

  \National Instruments\\examples\Vision\Image Processing\Flat field Estimation.vi

  My recommendation is to try the feature in LabVIEW and see if it works well with your images.

  The latest version of the expedition of the VBAI (2014 SP1) which was made available before Vision Development Module 2015 does not yet support this feature. What you can do to use it in this version, is create a VI in LabVIEW 2014 SP1 that implements the Correction on the flat ground and call using the LabVIEW execution step.

  It will be natively supported in the next version of 2015 VBAI.

  I hope this helps.

  Christophe

• Custom Tools/menu bar VBAI

  I would like to find a way to customize the menu/toolbar for a Vision Builder AI.  It seems that the buttons launch and Inspection stop Insepction cannot be hidden/disabled or password protected operator.  Does anyone know of a way to control these elements?

  I am aware that the VBAI may use a custom interface developed in a LabVIEW VI, but it seems to me that the buttons Run/Stop always appears unless a property for the latter can be accessed.

  How a developer can prevent accidental a machine vision inspection stop if the Stop button is always enabled?

  Thank you
  Dan

  Hi Dan,.

  Unfortunately, there is no way to disable these keys of Vision Builder AI. That's the good reviews.

  You are right: even when using a custom user Interface, VBAI will display these buttons and they will be activated.

  The only solution to this issue now, is instead of using the Vision Builder of the application's main executable file, create custom LabVIEW user interface and use the VBAI API to open/run the inspection. You will be able to program in LabVIEW user access capabilities and only activate the features that you want to give access to the operator on your UI.

  The developer will always be able to edit the control using Vision Builder AI.

  We are aware of the lack of UAC in VBAI.

  Example of using the VBAI API can be found here:

  C:\Program Files (x 86) \National Instruments\Vision VBAI 2014\API examples

  Christophe

• Board contact and photomerge does not

  I run creative Cloud in a college and I try to get the photo merge and to communicate with the worksheet functions work in photoshop CC 2014

  I can run a administrator account but not accounts of the student, where permissions are limited. Students get a dialog as follows:

  

  This leads me to believe this is a permissions error and I ran a trace procmon to try to find where permissions need to be but I don't see anything that stands out. Is there a list of files/file types that must be able to run?

  It is an error, the script will fail when it tries to display the dialog box. It may have something to do with the way CC2014 has been installed. In point Adobe ScriptUI interface should be involved.  You do not state what OS you are using. I've seen some users Mac adds on the permission issues. I use windows and do not recall that no additions on the windows permission issues.

• Account unduly restricted with more than 8,000 customer contacts

  I have not received no help for days.

  I get a response automated email "task force", which does not help.

  Please help me to recover my Skype account. My Skype wrong suspended because my competitors brought me from false Skypes to eliminate me from the market.
  
  I have a great company and I have over 4000 contacts on my Skype. I competitors blackmail they will report and take out me of the market. Today my Skype me am restricted.
  
  You can investigate and see that I never broke any rule of Skype.
  I have been using my Skype for years and never broken any rules. I use this Skype for business of online games and I have over 4000 contacts on this subject. Lose everything, I lost a large part of my work and income. I really need help with that.
  
  I am really worried and I feel that my life has been ruined with my Skype being suspended. It's my competitors making false Skypes me, some of them made me sing. I was unjustly suspended. Please This degrades to the Skype team so that they can study and lift my suspension.
  
  It's very big obstacle for me and I feel I want to die if I can't get back my Skype. This is very serious for me.
  
  I submitted several forms of verification, I always get the same answer that the automatic system detected I broke the duration of use and it will remain limited. Im getting very tired, and I don't have a lot of energy to do this...

  I contacted live chat more than 20 times, argued more of 10 forms of verification. All I ever get is the same answer and say once again I broke the duration of use, which I never have. These people are reobots, they do not investigate or help. Here is an example of the email that I received:
  
  --------------------------------------
  Hello
  
  Thank you for your response.
  
  As much as I would like to help you, I'm sorry, but we have a process to follow. Once the system detects something suspicious on the account, it is automatically limited by the system.
  
  You can again check terms of use for Skype, please click this link.
  
  Hoping for your patience and understanding.
  
  Best regards
  
  Lyramai P.
  
  Skype customer service

• SkypeSetupFull.exe constantly downloading some software

  Hello, Skype gurus!

  I strongly need a Board!

  In recent days, some software on my Workstation Windows 7 download constantly the following URL:

  http://download.Skype.com/bb0132fb8faa3e9a9c45556fec34fb7c/Partner/66/SkypeSetupFull.exe

  Well, download 30 + Mb 2 - 3 times a day may not be a big deal, but this happens in the office and my weekly Internet traffic is limited, so it gets sold out by Wednesday...

  Does anyone have an idea about the software you can start those downloads?

  Of course, it isn't Skype itself, disabling the automatic updates has been the first step in my invetigation.

  And normally Skype does not download the Offline Installer, is it not?

  If all goes well, "partner/66' part of the URL can be the key...

  And if there is no quick answer, how can I detect the process that download from this URL?

  Thank you very much in advance for your help!

  Sergey

  Disabling automatic updates does that stop automatic updates , but Skype will still attempt to suggest updating to the current version and download the installation file.

  You can try to update your Skype to the 6.9.0.106 currently the latest version using this msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.9.0.106.msi

• The manufacturer custom driver cannot be updated.

  Hello, my computer is a HP p6642f with windows 7 64-bit OS.  I need to update my graphics card for games, I tried to update my HP graphics card but the version on my computer shipped with is the latest version, as the HP 8.15.10.2119 as dated 20/04/2010.  I do not exactly know what graphics card I have, my dxdiag says;

  System

  Information System

  Current date/time: December-12-26 19:07:40

  Computer name: OWNER-HP

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600)

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: p6642f

  BIOS: 12/07/10 14:03:04 worm: 6.12

  Processor: Intel Core I5 CPU 650 @ 3.20 GHz (4 CPUs), ~3.2GHz

  Memory: RAM 6144MB

  Page file: 6649MB used, 5106 MB of available space

  DirectX version: DirectX 11

  Display

  Device

  Name: Intel(r) HD Graphics

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics (Core I5)

  DAC type: internal

  Memory total approx. : 1760 MB

  Current display mode: 1680 x 1050 (32 bit) (59Hz)

  Monitor: generic PnP monitor

  Drivers

  Driver: igdum64.dll, igd10um64.dll, igdumd >

  Version: 8.15.10.2119

  Date: 20/04/10 21:18:38

  WHQL Logo would be: n/a

  DDI version: 10

  WDDM 1.1 driver model

  What I need to know is what graphics card I have the latest update what are not compatible and how to install the new version, the driver from the manufacturer to measure.  Any help will be greatly appreciated.  I got 2 games for Christmas, DOOM 3 BFG edition and limited edition of Medal of Honor Warfighter.  Will not run and I suspect that my graphics card update can fix these two problems.  When I try to load edition BFG DOOM 3, I get the message:

  'Unable to initialize OpenGl' followed;

  Timing QA INIT: 000124ms
  D3BFG 1.1400 win - x 86 November 9, 2012 10:38:21
  3192 MHz Intel CPU with MMX, SSE and SSE2 and SSE3 & HTT
  5872 MB of memory
  -1284 MB of video memory
  Winsock initialized
  Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 netmask NULL - skipped
  Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
  Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 netmask NULL - skipped
  Sys_InitNetworking: adding loopback interface
  Doom using MMX and SSE SIMD processing
  flush to zero mode
  anomalies-zero mode are enabled
  -Initialization of file system-
  Loaded resource file _Common.resources
  Loaded resource file _Ordered.resources
  Loaded resource file _Sound_pc.resources
  Loaded resource file _Sound_pc_gr.resources
  Reading resource CRC...
  Current search path:
  C:\Program Files (x 86) \Steam\steamapps\common\DOOM 3 Edition/basis of BFG
  C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
  file system is initialized.
  --------------------------------------
  WARNING: Could not open the resource file maps/_startup.resources
  -Initialization Decls-
  ------------------------------
  Failed to open the log files
  execing default.cfg
  could not exec D3BFGConfig.cfg
  couldn't exec autoexec.cfg
  -R_InitOpenGL-
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. whose window class
  .. that fake window class
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 640
  dmPelsHeight: 480
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1680
  dmPelsHeight: 1050
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  Unknown command "vid_restart".
  Cannot initialize OpenGL
  Closure of the OpenGL subsystem
  .. .shutting to the low LHQ

  And when I try to load Warfighter of Medal of Honor Limited Edition I get a window saying:

  'Creation of device DirectX error' followed;

  Could not create D3D device of at least version 10.0 on card 'Intel(r) HD Graphics' chauffeur 'unknown '.  The error is DXGI_ERROR_UNSUPORTED ('East.').

  This is usually casued by not only not the minimum required DirectX support in the GPU.

  For the NVIDIA GPU, DirectX 10.0 support is required.

  For AMD and GPU by other sellers, DirectX 10.1 support is required.

  Okay, for Medal of Honor veteran it says my graphics processor does not support DirectX 10.1, but the fact is that I have direct X 11 which contains everything contains DirectX 10.1.  So I guess DirectX or Medal of Honor Warfighter is looking on behalf of my video card, comparing it to a list of compatible cards, my card has been customized by the manufacturer is not on the list, and if he refuses to try to load DirectX or Medal of Honor Warfighter?  I don't know if there is another way to fix it would be great, but I really want to update my video card.  I heard that the update one driver custom manufacturer can casue instability, but I'm willing to take the risk.  If I can't get a solution to my problem here, I would at least know what is my model of graphics card other than just "Intel(r) HD Graphics (core I5)" so that I can continue the search on my own.

  Here are the specifications of your desktop HP Pavilion p6642f. According to specifications, your computer has integrated Intel HD Graphics using the Intel H57 chipset (when a compatible CPU is installed). There is no driver that will allow you to play these games with the integrated graphic solution effectively very low power that is in your computer. The only way you will get to play these games, is to buy a new game rated PCIe x 16 graphics card and a new PSU rated for the graphics card. Please see 'selection of a discrete video card Dave_G Guide' for more useful information on this subject.

• My LEGO is flat...

  attempt to create LEGO-dust or sort of LEGO explosion.

  The brick is made in one minute (see preview screen Center), but when I do the group a cell particle is "flat":

  

  Although 3D, looks like it turns only around an axis... (??)

  tried various settings - no hope.

  Someone at - it advice?

  Sorry, but the way that you set it to the top will not work.  The 3D groups used as source for the cell particles get flattened, it has always been thus.

  By example, if you have 3 circles separated on Z in a 3D group and create a transmitter out of this group, the source of the cells still gets flattened, you don't actually have a particle composed of 3 circles of offset. You get a particle of cells that are flat, but the transmitter can project them in 3D space. For text 3D, if you use the object text 3D (single layer) as the source it will provide no flattened in the transmitter.

  That said, there is an "easy way" to do this and hard a way. First of all easy:

  1. set up your "Trade marked building block" in a group and Center it in the group.

  2 animate the rotation on two of the chains of the Group (X / Y for example).  I used the behavior of rate with slightly different values.

  3 export this output as a movie, and then import it into the movement.

  4. use the film as the source of the issuer. Make sure that the random boot image is checked in the settings of the transmitter.

  -You may need to adjust the rotation speed. I used this method to create particles of blood cells in the past and it worked fine.

  Pros: Simple configuration works in most cases. Faster and better performance.

  Disadvantages: Not true 3D, you must perform a new rendering of the sources of the cell if you need to change the items.

  90% of the time that this method will be good enough.

  Here's the hard, but it has limits (I'll get to those).

  1. in a new group, create your basic "box" using text in 3D. Using the commands to set layer transformation origin (Center of the world) on XYZ, is visually very well.

  2. based on the Properties tab, move the anchor point for the box originally as well. Check the position of the top, front and one side. You can reduce the opacity to see the grid in 3D.

  3. now, create a new text layer object to be the 'peg '.

  4. use the rotation settings in the appearance tab text to get the ankle facing the correct direction, associated with the box.

  5. move the layer 'peg' in the right position related to the area using the 3D transformation controls.

  6. once in place, select the layer and again move the anchor point toward the center of the world.

  You have now two objects which will have all created transformations effectively from the same point. The shared location of anchor is essential to make it work.

  7. Select the first box and create a 3D with that issuer.

  8 copy the random start in the control of the cell value. You will need it for each post.

  9. drag the layer peg on the transmitter, which will create a new cell.

  10. glue the random seed value in the box, the cell in peg.

  Here is where I would test the basic settings.

  IMPORTANT: THE VALUES IN CELL OR CHANGES NECESSARY TO EVERY CELL AND MATCH FOR ALL THE CELLS IN THE TRANSMITTER.

  For each cell in the change in the rate of birth to something low (I used 2) so you can see what is happening.  Reading and verification of the animation. If everything is configured correctly (original anchor point points are at 0,0,0 in the values of the world, random seed for the match of cells) that you will have the pegs that stick to the boxes.  If things don't stick you probalby have problems with the anchor positions (they do not match) or values of cells.

  Once you have set up the first peg and know that it works, you can add extra pegs by using the previous steps.  Then check that the anchors are centred and correspond to cell values. for each cell in the transmitter.

  So here are the limits.

  • Easy to break delicate installation (but not too bad).
  • If you wish the transmitter to turn cells, they will turn only on a single axis (z).  You can work around that, by linking the rigging the rotation of text object layer together values and then animate these on another axis, as Y.  However, this will affect all cells in the transmitter, so things a still fairly uniform.  To work around this problem, you can duplicate the text layers, create an another particle emitter with a few shifts (birth rate, direction of rotation, speed). When played together, they will look more random.

  Again, the most important thing to get this second method works is paired things (anchor points, the layer changes, cell parameters). Knowledge of the rigging/link can help.  FWIW, this configuration can also be much more intensive treatment depending on the purpose of text how he takes and create the number of particles, your mileage may vary (this is why there is the easy way).

  Good luck!

• 840 G2 laptop EliteBook: 2 external displays

  Hello

  I would like to know if HP EliteBook 840 2 supports 2 external displays.

  Thank you

  Hello

  Yes but ONLY Garland with Display Port. Option with docking station will be:

  VGA
  Port supports resolutions up to 1920 x 1200 external resolution@75 Hz

  DisplayPort
  Allows resolutions up to 3840 x 2160 @ 60 Hz. Supports multi-Stream Transport (MST) where the three screens can be chained with digital display through DisplayPort only. The full resolution of each screen will be limited as you get to 3 displays because of the limitations of bandwidth with a maximum resolution of:
  2560x1600@60Hz for 2 screens
  1920x1200@60Hz for 3 screens

  Number of views taken in charge
  3 with optional * UltraSlim Docking Station
  * Sold separately.

  Source: http://www8.hp.com/h20195/v2/GetPDF.aspx/c04472796.pdf

  Kind regards.

• Microsoft Flight Simulator 2004 required administrator rights

  I have Microsoft Flight Simulator 2004 (I know, I know) and when I try to run it from a limited account, I get an error stating that I have administrator privileges. Is it possible to replace that or enter my password once? I don't need my children asking me my password every time they want to play. It doesn't seem like it does all what changes the computer, why can't it be used in a user account only limited?

  Specifications of the computer:

  • HP (not sure of the exact model number)
  • Windows XP SP3 (fully updated)
  • AMD Athlon X 2 Dual Core 4400 + @2.19 Ghz
  • 1 GB OF RAM
  • Graphic ATI Express 200 Radon

  I don't mind enter my password once to grant access, I'm not only you have to enter it every time my kids want to play. Thank you for your help.

  This is normal.

  As a work around, follow these steps:

  1. Click on the shortcut or the name of the program file.
  2. Click Advanced, click run with different credentials, and then click OK.
  3. Start the program.
  4. When you are prompted, type an administrator user ID and password.

  http://support.Microsoft.com/kb/893677